5-osni obdelovalni center

POSMILL H 800 U

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, obratovalne ure: 11.200 h, največja hitrost vretena: 18.000 obr/min, potovalna razdalja osi X: 670 mm, pomik osi Y: 820 mm, pomik po osi Z: 600 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: iTNC 530, število osi: 5, This 5-axis POSmill H800U was manufactured in 2017. It is a universal machining center featuring a Kessler spindle with 18,000 rpm and a turning diameter of 800 mm. The machine is equipped with a Heidenhain 530 control unit and is fully fitted with Heidenhain measuring systems on all axes. Notably, it offers 96 tool changer slots. Consider the opportunity to purchase this POSmill H800U universal machining center. Contact us for further information. Rbedpfxeyfulqj Ad Tst • New service scheduled for April 2025 including replacement of rotary union (€8600) • 96 tool changer positions • Space-saving base, stacked coolant supply (rare) • Large spindle chiller • Fully equipped with Heidenhain measuring systems on all axes • Kessler swivel arm, turning diameter 800 mm, fully usable with zero point system • Internal coolant pressure: 40 bar • Coolant system: water and air both externally and through the spindle, internal coolant pressure 40 bar with 600 litres capacity • NC rotary tilting table: Ø 800 mm The machine underwent a complete overhaul at the beginning of 2025 – relevant documentation is available. Rotary unions, rod connections, and general maintenance were carried out. Additional equipment: • Accessories: chip conveyor

Stanje: rabljeno, Leto izdelave: 2022, vpenjalna sila: 320 kN, delovna prostornina: 1.068 cm³, tlak vbrizgavanja: 2.120 letvica, skupna masa: 14.000 kg, delovne ure: 2.907 h, premer polžastega transporterja: 65 mm, Dobavni pogoji: FCA Pegnitz Dobavni rok: po dogovoru Plačilni pogoji: 100 % plačilo pred prevzemom stroja, čisti neto Rbsdpfx Adsxluk Ss Tst

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, obratovalne ure: 12.971 h, največja hitrost vretena: 18.000 obr/min, potovalna razdalja osi X: 670 mm, pomik osi Y: 830 mm, pomik po osi Z: 600 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: iTNC 530, število osi: 5, This 5-axis POSmill H 800 U was manufactured in 2018. It features a travel range of 670x830x600 mm, a swivel range of -120° to +120°, and a full-contour 360° rotary table. Equipped with a milling spindle operating at 18,000 rpm, a tool changer with 96 positions, and a Heidenhain iTNC530 control system, this universal machining center is ideal for complex machining tasks. Take advantage of the opportunity to purchase this POSmill H 800 U universal machining center. Contact us for further details regarding this machine. • Swivel range (B axis): -120° to +120° • Rotary table (C axis): 360°, infinitely variable • Tool changer: 96 positions, HSK-A63, rear-mounted with display • Measuring systems: Heidenhain linear scales (X/Y/Z) with air purge; Heidenhain rotary encoder • POS kinematic module including reference sphere • POS contour protection • Control cabinet cooling: active air-to-air cooling system • Spindle chiller: temperature controlled • Oil cooling for 4th/5th axes: temperature controlled • Network and USB interfaces Rjdpjydpp Uefx Ad Tebt • Automatically controlled crane loading hatch • Coolant pump at the head via M functions • Tool change safety door • Table media interfaces: 3 hydraulic connections and 1 pneumatic connection at table center • Mobile electronic handwheel • Operating hours: 22,996 total; 12,971 program run hours Additional equipment • External chip agitator / chip conveyor • Chip removal device with separate pump • Water gun (washdown) • Air supply at the spindle • Electromechanical oil/coolant separator • Automatic coolant level monitoring • Stack light (machine status indicator) • Hydraulic unit, including M function control Technical Specification Taper size: HSK 63

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, obratovalne ure: 17.050 h, potovalna razdalja osi X: 670 mm, pomik osi Y: 830 mm, pomik po osi Z: 600 mm, skupna masa: 20.000 kg, največja hitrost vretena: 18.000 obr/min, število osi: 5, This 5-axis POSmill H 800 U was manufactured in 2012. It is equipped with a Heidenhain iTNC 530 control system, a new spindle with 5,700 operating hours since 2021, and a robust spindle speed of 18,000 rpm. The machine offers a large travel range with dimensions of 670/830/600 mm and supports 96 tool stations. Additional features include internal coolant supply with 60 bar pressure, a comprehensive coolant system, and a chip conveyor. Take advantage of the opportunity to purchase this versatile POSmill H 800 U machining center. Contact us for further information. Additional equipment: • New spindle since 2021: only 5,700 spindle hours (spindle replacement due to wear) • Machine inspection under power possible Rbedpfsx D Dx Ajx Ad Tot Machine advantages Technical benefits: • Air-through-spindle feature • Internal coolant supply: 60 bar • Coolant unit with 1,000 l paper band filter • Rotating viewing window • Chip rinse gun // bed flushing • Oil mist extraction • Blum tool breakage/measurement system • Heidenhain 3D touch probe • Mobile electronic handwheel • Kinematic package Additional information: Spindle replaced due to wear (new spindle: 5,600 hours since 2021). Production hours: Control powered on: approx. 33,300 hours, Spindle powered on: 17,050 hours (new spindle 5,600 hours, replaced in 2021 due to wear). Tool stations: 96; includes tool holders (shrink-fit chucks, collet chucks, etc.).

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Type of machining: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table dimensions: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L X, Y, Z, U and V axes Travel X, Y, Z: 550 x 350 x 400 mm Travel U, V: 550 x 350 mm Collision protection: X, Y, U, V, Z axes Taper cutting, max. angle: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options 0.1/0.2/0.3 mm) Wire guide type: closed diamond, no gap Available spool weight and type (DIN standard): 1.6 kg (K 100) to 8 (K 160) Available spool weight and type (JIS standard): 3 (P3) to 5 (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum achievable surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measuring resolution: 0.5 micron Servomotors: AC type Rbsdpjw Ucyuefx Ad Tjt All technical data is given without obligation and subject to errors or omissions.

Stanje: dober (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 670 mm, pomik osi Y: 830 mm, pomik po osi Z: 600 mm, Prednosti stroja Tehnične prednosti stroja Visoke vrtljaje vretena 18.000 min⁻¹ Rbodpfxsyard To Ad Tjt Kompleksni hladilni sistemi za vreteno in osi Napredni merilni sistemi za natančnost Velika kapaciteta menjalca orodij (96 rež HSK-A 63) Omrežna in USB povezljivost Obseg vrtenja: -120 do +120 stopinj Rotacijska miza: 360 stopinj, neomejena

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: GS1000/5-T, največja hitrost vrtenja: 30.000 obr/min, skupna masa: 15.500 kg, Letnik izdelave: 2014 Stanje: zelo dobro Magazin: 66 x HSK63 Krmiljenje: Heidenhain 530 Vreteno: n=30.000 V mizi integriran Erowa sistem ničelne vpenjalne točke Erowa robot easy 250 avtomatizacija s 6 paletami 3D merilni sistem Oljno-zračna mazalna enota za visokofrekvenčno vreteno Lasersko merjenje Delovne ure vretena: Rbsdow Awmtjpfx Ad Tet

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, moč: 27 kW (36,71 KM), skupna dolžina: 1.680 mm, skupna širina: 1.250 mm, skupna višina: 1.390 mm, Leto izdelave: 2013, obratovalne ure: 577 h, vhodna frekvenca: 50 Hz, premer gredi: 105 mm, dolžina podajanja os X: 265 mm, vrsta vhodnega toka: trifazni, Oprema: nujno zaustavitev, vrtilna hitrost brezstopenjsko nastavljiva, PBT25 z avtomatskim merjenjem radija – popoln vsestranski stroj v naši ponudbi izdelkov. Ta zmogljiva in natančna krivilna naprava prepriča z maksimalno prilagodljivostjo in ergonomijo. Brezstopenjsko nastavljiva sprednja razdalja med valji od 200 mm omogoča najmanjše radije z brezhibnimi prehodi. Zahvaljujoč programski opremi PC300 je naknadno krivljenje izjemno enostavno. Trije zmogljivi in tihi elektromotorji poganjajo valje do 22 obr/min za najvišjo natančnost. Standardna podpora za vse tri valje zagotavlja optimalno stabilnost. Več informacij na uradni spletni strani PBT AG. Rbedpfxjwm N Epj Ad Tet

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2009, CNC vertikalni obdelovalni center HERMLE C 1200 V Z obvodnim krmiljenjem Heidenhain iTNC 530 Leto izdelave: 2009 Pomiki: X 1200 Y 900 Z 500 Območje vrtljajev: 20 – 10.000 min⁻¹ brezstopenjsko (HSK 63) Z naslednjo opremo: Fiksna kotna miza 1260 mm x 800 mm vpenjalna površina Vertikalni menjalnik orodja s 30 mesti v magazinu (HSK 63) IKZ 40 bar Odpihovalna naprava Strgalo s trakom Rotacijsko prozorno okno Hladilna naprava Elektronska kompenzacija toplote iTNC 530 Električni ročni upravljalni modul HR 410 3D merilna tipalka Heidenhain Hladilna enota krmilne omare (RITTAL) Odvod oljne megle Različni držali HSK 63 z orodjem Hladilnik olja vretena Pištola za spiranje ostružkov 4 nastavljive strojne noge Rbjdex Hhctepfx Ad Tet Navodila za uporabo

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, 1290 is a professional laser cutter designed for serious manufacturing. It features two laser heads, turning this CNC laser machine into a super-efficient powerhouse capable of running 24/7. Additionally, this laser engraver and cutter is equipped with a lighting table and a robust conveyor system that can support workpieces weighing up to 80 kg. The Wattsan 1290 ST can cut up to 10–13 mm and engrave wood, cardboard, acrylic, glass, rubber, stone, wool, and more. Both laser heads operate simultaneously with a minimum spacing of 130 mm. The table of this model offers a lowering depth of 160 mm. Contact our managers for further details! Features of the Wattsan 1290 Duos LT: • Working area: 1200x900 mm • Laser power: 100–130 W • Table lowering depth: 160 mm • Positioning accuracy: 0.03 mm • Machine size: 1410 x 1790 x 670 mm + 315 mm if on wheels • Packaging dimensions: 1920 x 1630 x 820 mm • Weight: 393 kg Rjdpervimxsfx Ad Tobt Virmer provides not only first-class machines but also service and delivery. Our engineers and managers are always ready to answer any questions and provide video support if needed. Furthermore, Wattsan device owners benefit from lifetime online support. Virmer is based in the Netherlands and operates across Europe. Virmer is the official distributor of Wattsan. We supply not only laser engravers, but also metal cutters, welding machines, markers, and cleaning equipment. Wattsan is a Chinese manufacturer with almost 15 years of experience in laser technology, continuously improving with the help of customer feedback. With over 50 upgrades implemented, Wattsan’s machines have become more reliable, precise, and powerful, helping customers elevate their businesses to a new level. YOU CAN CALL OR WRITE TO US! WE WILL HELP YOU SELECT THE RIGHT MACHINE FOR YOUR NEEDS.