Stružnica za cevi za plin in nafto

POREBA TPL 90 Oil Country Lathe Hollow Spindle

Lathe in very good technical condition, has seen very little use and was not utilized for machining pipes.

Poręba TPL 90/3m lathe (also listed in market nomenclature as a variant of the TPK 90 series) is a textbook example of an Oil Country Lathe / Hollow Spindle Lathe.
Iedpfx Aoy Sf Azeb Ajib

This model meets all the specific criteria for machines intended for the Oil & Gas sector:
• Huge spindle bore (Big Bore): Machines in this version have a spindle bore diameter of 320 mm (approx. 12.5 inches), which allows for easy passage of thick-walled drill and casing pipes.
• Dual chuck system: The headstock construction allows for the installation of two independent lathe chucks (front and rear, typically with a diameter of 28 inches), which clamp and stabilize the pipe at both ends of the spindle.
• Optimal working range: The 3m designation defines the turning length between centers (3000 mm), which, combined with the swing over bed of 930 mm (hence the 90 in the model name), enables machining of massive pipeline elements.
• Extreme rigidity: FUM POREBA products are renowned for their monolithic, very wide, and heavy cast iron beds, which effectively dampen the significant vibrations generated during thread cutting, especially with tapered threads.

In international used machinery catalogs, this specific Poręba model is categorized directly under Oil Field Lathes.

TECHNICAL DATA:

Geometric parameters and machining ranges
• Swing over bed: 930 mm / 36.6"
• Swing over cross slide: 630 mm / 24.8"
• Swing in gap: 1200 mm / 47.2"
• Maximum turning length between centers: 3000 mm / 120"
• Bed width: 585 mm / 23.0"

Headstock
• Spindle bore diameter (Hollow Spindle): 320 mm / 12.6" (classified in US nomenclature as 12.5" version)
• Spindle speed range: 5 – 250 rpm or modified versions up to 710 rpm
• Number of spindle speed steps: 18

Feed and threading system
• Longitudinal feed range: 0.1 – 12.8 mm/rev / 0.004 – 0.504 in/rev
• Cross feed range: 0.05 – 6.4 mm/rev / 0.002 – 0.252 in/rev
• Types of threads cut: Metric, Inch (Whitworth), Module, Diametral Pitch (DP)

Tailstock
• Tailstock quill diameter: 130 mm / 5.1"
• Tailstock quill stroke: 300 mm / 11.8"
• Quill taper: Morse No. 6 (MT6)

Drive and overall dimensions
• Main motor power: 22 kW / 29.5 HP
• Total machine length: approx. 5500 mm / 216.5"
• Total machine width: approx. 1750 mm / 68.9"
• Total machine height: approx. 1500 mm / 59.0"
• Total machine weight: approx. 8000 kg / 17,630 lbs

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.