Merilna plošča

PLANOLITH Messtisch 3000 x 2000 x 930mm

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Kjdpofg E Hpjfx Abbswt Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Price on request.

Stanje: dober (rabljeno), Leto izdelave: 2000, Manufacturer: KUKA Model: KR 350/2 Year of manufacture: 2000 Kodpfx Abeh Dwr Uobswt Net weight: 1,870 kg Without cables and control cabinet. Supplement to the measurement report!

Stanje: dober (rabljeno), Marmorna plošča Dolžina: 3500 mm Širina: 1500 mm Debelina: 300 mm Višina na nogah: 930 mm Število nog: 5 Kodpfxoig Hu Ns Abbewt 1 manjša poškodba na vrhu (D 150 mm x Š 20 mm) – glejte fotografijo Teža: pribl. 3 t

Stanje: novo, Sheet width: 2050 mm Sheet thickness: 3 mm Frame gap: 2100 mm Backgauge – adjustable: 600 mm Connected load: kW Kwedpfofv H Dkjx Abbjt Machine weight approx.: 1.1 t Dimensions (L x W x H): 2.7 x 2.1 x 1.4 m The machine operates quietly and, thanks to its geared motor with brake system, is energy efficient. Our machine is constructed as a monoblock body, welded from ST42 quality material. The machine’s blades are made from 2379 grade material, manufactured by BOHLER. These high-quality blades ensure precise cutting. Emergency stop button, foot switch, and finger protection grid are included as standard equipment. (Documentation available in English only)

Stanje: novo, Cutting capacity at 90°: round 350 mm Kwsdpfx Absfg E Hlobet Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangle 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight approx. 1.2 t Space requirements approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-Column Double Mitre Bandsaw K-tech DG 50/33 HA-I • 2-column mitre saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth running thanks to angled cut, feed regulator and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for cleaning) • Energy-efficient and low vibration thanks to angled cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 – 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vices • LEDs for monitoring all safety functions • Large-dimension drive wheels (520 mm) dia. • Intuitive mitre angle adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to start of material or immediate cutting for serial cuts 4. Saw band off 5. Raise frame just above material 6. Open vice

Stanje: rabljeno, Length: 1800 mm Width: 1200 mm Machine weight approx.: 1.6 t Kwsdpecxxu Dsfx Abbot Space requirement approx.: 1.8 x 1.2 x 0.4 m - Measuring plate with 5 special feet - Good condition

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Initial commissioning: 2014 Control system: Heidenhain iTNC 530 HSCI incl. HR 520 handwheel Machine hours Machine power-on hours: approx. 90,000 h Spindle hours: approx. 38,000 h Current milling spindle hours: approx. 900 h Kedpswywcisfx Abbowt Travel distances X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 600 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Drives linear axes Feed rate X/Y/Z-axis: up to 60 m/min Axis acceleration X/Y/Z-axis: up to 5 m/s² Connection data Connected load: 190 kVA Main fuse: approx. 315 A Dimensions, weights Space requirement machine with peripherals: approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Colour Enclosure, gantry, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green Description: Additional equipment - Coolant supply with belt filtration system - 50-position chain tool changer - Workspace enclosure - Chip conveyor - LTA emulsion mist extraction system Optional at extra charge: - Renishaw RMP60 wireless measuring probe - BLUM Control NT Condition of the machine Fully functional, in excellent condition, and still under power for inspection! The photos are for illustration purposes and show a new machine of this type. Original photos will follow shortly!

Stanje: zelo dobro (rabljeno), Odlično ohranjen šest vretenski stružni avtomat INDEX MS 25 s šetimi prečnimi on šestimi vzdolžnimi vodili orodij. Cena je po dogovoru glede na izbrano dodatno opremo: vpenjalne stročnice, orodja, transporter odrezkov itd. Kwodpfx Ajqhkuksbbet Stroj še obratuje v proizvodnji. Po dogovoru možen ogled.

Leto izdelave: 2022, Stanje: kot nova (razstavni stroj), Manipulator with hydraulic height adjustment, faceplate with clamping slots, and handheld remote control. Height (faceplate horizontal): approx. 532 – 1,132 mm Stroke/travel distance (hydraulic): approx. s = 600 mm, t = 20 s Kwodpfjfw Ah Rjx Abbot Faceplate swivel range: approx. ±300° Height (axis, faceplate vertical): approx. 709 mm Faceplate dimensions: Ø1,200 mm x 40 mm, 6x clamping slots Main spindle speed: approx. 2.0 rpm (others on request) Main spindle torque: approx. 7,500 Nm Faceplate speed: approx. 2.5 rpm Faceplate torque: approx. 1,500 Nm

Stanje: rabljeno, Clamping plate, scribing/marking plate, inspection plate, measuring table, welding table, aligning plate - Clamping plate is from a coordinate measuring machine Kwsdpfx Asfc T Tqjbbet - Width: 1335 mm - Length: 3000 mm - Height: 250 mm - Plate thickness: 40 mm - Plate features: with support ribs - With 4x leveling feet - Quantity: 1 piece available - Transport dimensions: 3000 x 1335 x H750 mm - Weight: 2,749 kg