Rundtaktcenter

Pfiffner RT100-12-14

Stanje: potreben popravila (rabljeno), Fehlmann Picomax 60 M (5-axis universal milling machine) with Heidenhain TNC 426 X axis: 500 mm Y axis: 350 mm Z axis: 610 mm Motor spindle: 18,000 rpm Power: 10.2 kW Tool changer: 24 stations Weight: 3,200 kg Equipped with 4th axis Tool interface: SK 30 Approx. 40 tool holders included The machine has the following issues: Dsdewmwrdjpfx Apwewc - Heidenhain 430 controller is defective (not always possible to boot, crashes occur during machining operations)

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 6, independently controlled - Bar capacity: 32 mm Dsdpfeuhauysx Apwowc - Max. spindle speed: 6,300 rpm - Machine equipped with 28 CNC axes - Slide unit 1.1: X and Z axes CNC controlled - Slide unit 2.2: X and Z axes CNC controlled - Slide unit 3.1: X and Z axes CNC controlled - Slide unit 3.2: X and Z axes CNC controlled - Slide unit 4.1: X and Z axes CNC controlled - Slide unit 4.2: X and Z axes CNC controlled - Slide unit 5.1: X and Z axes CNC controlled - Slide unit 5.2: X and Z axes CNC controlled - Slide unit 6.1: X and Z axes CNC controlled - Slide unit 6.2: X and Z axes CNC controlled - Counter spindle at position 6.1 EQUIPMENT - Control: INDEX C200-4 (Siemens SINUMERIK 840D) - Simple NCU - Bar feeder magazine: IEMCA SIR MS32/33/P - Coolant tank: KNOLL AE 1076 * with high-pressure pump - Chip conveyor: KNOLL VRF 500 - Part evacuation with conveyor at position 6

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Offered is a double-spindle pick-up lathe EMAG VSC 500 DUO. The machine is equipped with 2 independent work spindles and 2 EMAG turrets. The machine allows for either simultaneous machining of 2 identical workpieces with the same operation, or sequential machining of one workpiece in two consecutive processes. Depending on requirements, the machine can be equipped with additional peripherals (chip conveyor, coolant system, external automation, etc.). CONTROL SYSTEM Siemens 840 Dsl Dsdpfx Aet Du Tdepwewc TECHNICAL DATA Workpiece diameter: max. 440 mm Workpiece height: max. 250 mm Chuck diameter: 450 mm Swing diameter: 550 mm X-axis travel: 925 mm Z-axis travel: 400 mm TOOL CARRIERS 2x EMAG disc turrets, 12x CDI 68, with driven tools Price, delivery time, and machine configuration upon request.

Stanje: dober (rabljeno), Deli, ki so prikazane v roki, niso vključeni. Tehnične podrobnosti so prikazane na sliki. Orodja v leseni škatli so priložena stroju. Dodpfx Ajwb Eptjpwowc

Stanje: dober (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 81362, potovalna razdalja osi X: 305 mm, pomik osi Y: 305 mm, pomik po osi Z: 330 mm, hitro pomikanje X-os: 48 m/min, hitri pomik os Y: 48 m/min, hitri pomik na osi Z: 48 m/min, model krmilnika: Fanuc 18i-MB, skupna višina: 2.200 mm, skupna dolžina: 3.300 mm, skupna širina: 2.000 mm, širina mize: 250 mm, dolžina mize: 250 mm, skupna masa: 4.600 kg, največja hitrost vretena: 15.000 obr/min, število vreten: 1, število mest v zalogovniku orodij: 40, Oprema: dokumentacija / priročnik, transportni trak za ostružke, Kitamura Mycenter HX250iF, letnik 2011 Ser.št: 81362 *zamenjani ležaji glavnega vretena 07/2026 - CNC krmilna enota: Fanuc 18i-MB - Moč vretena: 11,2 [kW] - Število vrtljajev vretena: 15000 [rpm] - Premiki po oseh X/Y/Z: 305 / 305 / 330 [mm] - Hitri hod (X/Y/Z): 48 [m/min] - Št. orodnih mest: 40 - Tip držala orodja: BT30 - Čas menjave orodja: 1,2 [s] - Velikost palete: 250 x 250 [mm] - Število palet: 2 - Največja teža na paleto: 110 [kg] - Razdalja središče mize/vrh vretena : 380 [mm] - Dimenzije stroja: 3.300 x 2.030 × 2.300 [mm] - Teža stroja: 4.600 [kg] Oprema - Ročna komanda - 3 barvna statusna svetilka - Posoda za hladilno tekočino z visokotlačno črpalko - Sesalnik oljne megle - Transporter za ostružke - Hladilna enota za vreteno - 3D tipalo Renishaw Dwjdoxur E Sspfx Apwjc - merjenje orodja Renishaw - transformator - cca 150 orodnih držal

Leto izdelave: 2010, stanje: pripravljen za uporabo (rabljen), Max. material width: 1700 mm, max. roll diameter: 800 mm, core inner diameter: 152 mm, max. roll weight: 750 kg, stacking length: 250–2200 mm, connected load: 12 kVA, length: 8397 mm, supplied with drawings, circuit diagrams, EC Declaration of Conformity, operating manuals, risk assessment, spare parts lists. Dwsdskkiwxepfx Apwoc

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, obratovalne ure: 24.140 h, skupna masa: 10.000 kg, proizvajalec krmilnikov: FANUC, model krmilnika: 31i-NT-SmartX, število osi: 9, This 9-axis Nakamura NTJ100 turning-milling center was manufactured in 2017. It features a bar capacity of up to 65 mm and two spindles with maximum speeds of 4,500 and 5,000 rpm, respectively. The machine is equipped with a Samsys bar feeder, an Absolent extraction system, and numerous automated features such as through-spindle coolant supply, parts catcher, and automatic tool setting devices. Take advantage of this opportunity to purchase the Nakamura NTJ100 turning-milling center. Contact us for further information about this machine. • Increased bar capacity: 65 mm left, 51 mm right • Workpiece measurement: han-bei probe for automatic workpiece measurement (infrared or radio) for left and right spindle • Left and right with automatic swing-out function and 2x 4 measuring directions for rapid and precise tool setting via NC function • Operating hours: 43,399h • Coolant system: through-spindle coolant (CTS); coolant level float switch for machine stop at low level; additional through-spindle coolant flushing (left and right) • Bar capacity: Ø 51 mm • Type A parts catcher with collection tray, max. Ø 65 x 150 mm, 3.0 kg, spindle side, left, with plastic liner • Chuck air blow device for left spindle • Automatic power-off • Preparation for oil mist extraction unit with Ø 150 mm connection stub • Robot/automation preparation: pneumatic flap for robot handling at the top of the door, opening approx. 400 x 400 mm • Handwheel for manual travel of defined contours • Data server with 1 GB ATA memory card • Interface for KNOLL system • Triple signal light The Samsys bar feeder with a 1.5 m bar loading capacity has the following dimensions: length: 225 cm + 43 cm intermediate guide, width: 120 cm (including loading ramp and control panel), height: 145 cm or 180 cm with open flap. Dwsdpfx Apjx D Iuzjwsc The machine was primarily used for processing aluminum (95%). Additional equipment: • Samsys bar feeder including extension • Absolent extraction unit • Hinge belt swarf conveyor with interface, interval time control, and alarm analysis

Stanje: dober (rabljeno), Leto izdelave: 2008, Stroj je v dobrem delovnem stanju. Dwsdpfxou Rc Hmj Apwec

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, leto zadnje generalne obnove: 2023, General Description: Year of Manufacture: 2001/2023 Manufacturer: Emag Machine Type: VL3 Technical Specifications: Control: Fanuc 21i-T Swing Diameter: approx. 210 mm Maximum Spindle Speed: 6,500 rpm Turret: VDI 40 mm, 12 stations The machine is not equipped with live tooling. Hinged belt chip conveyor Spindle Mount: Gr. 5 Continuous parts conveyor Machine weight: approx. 5.5 t The following overhaul work was carried out in 2023: - Machine was completely disassembled, cleaned, and repainted - Main spindle bearings replaced - Guides and guide shoes on X and Z axes replaced - Ball screws on X and Z axes replaced - New central lubrication unit and hoses installed - Hydraulic unit checked and serviced; drive coupling between motor and pump replaced Dwjdpfstpu Szjx Apwoc - Cooling unit checked and serviced; temperature difference controller replaced - Clamping cylinder bearings replaced and resealed - A-axis gearbox bearings replaced and coupling between motor and gearbox replaced - Electrical cabinet cleaned - Operating panel replaced - New monitor - New internal lighting - Turret disassembled, wear parts checked, cleaned and resealed - Turret encoder and encoder wheel cleaned - Linear measuring systems on X and Z axes disassembled and cleaned - Springs at pickup station replaced - X and Z axis motors checked for bearing damage - Work door windows replaced - Chip conveyor completely disassembled, bearings replaced, cleaned, and repainted - Various small parts replaced as standard The product has been described by us with the utmost care. This description is non-binding and should be verified during inspection.

Stanje: pripravljen za uporabo (rabljen), rotary transfer machine RT100/12-26 Manufacturer: Pfiffner Serial number: 1101141101 Operating hours: 42,500 Dsdpji Ewn Ejfx Apwjwc Footprint: 14m x 8m