Vibracijski stroj za dodelavo

PERS Vibra-Line B 150l/Vibra-Dry A 200l Kombi

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Laser marking system Manuf. Baublys Model BL 150 S/NC 500 Year 2001 Technical Data Manufacturer: Baublys Model: BL 150 S/NC 500 Year of manufacture: 2001 Laser: 150 Watt Laser type: Q-switched pulsed solid-state laser Laser medium: Nd:YAG Wavelength: 1064 nm Beam diameter: approx. 1.2 – 1.3 mm after output coupling mirror at TEM00 Beam divergence: 5 mrad TEM00 Pulse duration (time): CW / 90 ns Max. output power: 65 W multimode 16 W single mode Pulse energy: 16 mJ at 3 kHz Beam deflection system: Galvanometer system Line width in mixed mode: approx. 0.12 mm Deflection speed: 3 m/s; corresponding to 200 characters/s at 1.5 mm height and single-line font Dimensions: approx. Blodpfx Agoq Abnnstog Weight: approx. Power supply Voltage: 400 V, 3-phase 50 Hz, clockwise rotating field Connection: 5-pin CEE plug 16 A 6h Max. power consumption: 8.5 kW, max. 16 A per phase Fusing: 3 x 16 A slow-blow Water connection Cooling water flow rate: 7.5 l/min at 20°C supply temperature Discharge connection: G 3/4" male thread Heat dissipation: approx. 6.5 kW Max. inlet water temp.: 20°C Water consumption: depending on inlet temperature Outlet temperature:

Stanje: rabljeno, Leto izdelave: 1983, Technical details: Internal diameter: 140 mm Total power requirement: 5.5 kW Machine weight approx.: 1.8 t Space requirement approx.: 2.8 x 2.5 m Max. workpiece weight: 15 kg Maximum clamping diameter: 140 mm Clamping length: 250 mm Maximum grindable bore diameter: 0.8-90 mm Small/large grindable bore: 160 mm Centre height: 90 mm Blodper R Elhefx Agtog Workpiece spindle, stepless: 112-1000 rpm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, moč vretenovega motorja: 22.000 W, skupna višina: 2.050 mm, skupna masa: 4.000 kg, proizvajalec krmilnikov: INDEX, model krmilnika: C200-4 / C200-8, This 5-axis turning-milling center Index G200 C was manufactured in 2000. Consider the opportunity to purchase this Index G200 C turning-milling center. Contact us for more information. Additional Equipment • Synchronous device for sub-spindle machining Bsdpfx Agjyailzjtslg • Tool carrier 3 for synchronized spindle (backside machining) • Additional milling spindle • Thread milling and polygon turning attachment • Non-gripper tool changer (6 tools, HKS-50 B, KM40) • Workpiece handling WHU100 • with C-axis • No driven tools Machine Advantages Technical Advantages • Space requirement (without bar feeder): 3580 x 3108 mm • Control unit: Resolution: 0.001 mm (input/output/correction) • Extensive travel ranges with multi-axis configuration • High precision with 0.001 mm resolution on the numerical control • Versatile expansion options and additional devices for extended functionality Additional Information Movement Cross Slide 1 (upper) - XYZB axes: X-axis: Travel 155 mm, feed force 5000 N, rapid traverse 20 m/min, resolution 0.0005 mm Y-axis: Travel 120 mm, feed force 10000 N, rapid traverse 7.5 m/min, resolution 0.0005 mm Z-axis: Travel 590 mm, feed force 5000 N, rapid traverse 30 m/min, resolution 0.001 mm B-axis (rotary): 360° swivel range, angle steps 5° (with detent), resolution 0.001° (with clamping), indexing time for 180°: 1 s Cross Slide 2 (lower) - XZ axes: X-axis: Travel 105 mm, feed force 5000 N, rapid traverse 20 m/min, resolution 0.0005 mm Z-axis: Travel 307 mm, feed force 5000 N, rapid traverse 30 m/min, resolution 0.001 mm Turret Right Turret: X-axis: Travel 120 mm Z-axis: Travel 400 mm Tailstock center distance: 400 mm Max force: 5500 N Drive: Hydraulic or electric Media Power supply: 400 V, 50/60 Hz Connected load: 20-45 kVA Current consumption: 35-80 A Hydraulic system: Flow rate: 18 l/min System pressure: 90 bar Fill volume: 70 liters Coolant system: Pump output (switchable): 20 l/min at 18 bar / 50 l/min at 3 bar / 60 l/min at 5-7 bar Fill volume: approx. 230 liters Chip conveyor: Hinged belt or scraper Workpiece holder: Main spindle: DB5 internal taper / D140 external, optional short taper Sub-spindle: D140 external (only tensile force permitted with collet and chuck clamping) 1: Spindle bore (collet clamping): Variants: 30 mm / 42 mm / 60 mm / 65 mm Spindle diameter at front bearing: 75 mm (with 30 mm bore) / 85 mm (42 mm) / 100 mm (60+65 mm) Max speed: 7500 rpm (30 mm) / 6300 rpm (42 mm) / 5000 rpm (60 mm) Spindle nose: ISO 702/1 (size 4 or 5) Bar capacity (workpiece diameter): 110-130 mm (30 mm) / 140-160 mm (42 mm) / 165 mm (60 mm) Max torque (Md max 100%): 33-62 Nm (30 mm) / 35-95 Nm (42 mm) Max power (P max 100%): 7-13 kW (30 mm) / 7.5-20 kW (42 mm) Dimensions Machine Depth 3580 mm

Leto izdelave: 1999, stanje: dober (rabljeno), Parts cleaning system REK Fluid Cleaner 1500/1, No. 297/99, year of construction 1999, SIEMENS Simatic OP7 control unit, roller conveyors, approx. 8 running meters. Bjdpfxounvw Eo Agtolg