Enostopenjski stroj za čiščenje delov

Pers Group Teijo C-1600SS-PD1

Single-stage parts cleaning machine

Operating Principle – Machine with lift door

The cleaning machine’s tank is manually filled with mains water (optionally via the automatic refill valve AR-2) and heated via heating elements and thermostat settings.
The cycle times for washing, dripping (optionally drying and steam extraction) are set via the “PROCESS TIMER.”

The parts are loaded onto the loading rack or loading trolley and pushed into the cleaning chamber. Alternatively, for heavy loads, a conveyor (MIU / AIU) can be installed to transport the parts into the cleaning chamber.

The lift door is closed, the machine started, and the wash pump circulates the cleaning fluid through the rotating spray systems onto the items being cleaned.
Rotation of the upper and lower spray arms is powered by the reaction force of the reaction nozzle at one end of the spray arm. The rotation speed can be adjusted with a screw on the reaction nozzle.
Optionally, motorized rotation and nozzle-equipped spray arms can be specified for the upper spray arm.

After the wash phase elapses, a short dripping phase allows used cleaning fluid to return to the wash tank through filter baskets.
Optionally, the wash solution can be filtered by a filter unit (EFG-6 or PP197).

Additional stages, such as prewash or rinse, are optionally available via static spray pipes NS-2 / NS-TEMP. In this case, parts are rinsed with mains water (cold or heated), which is then discharged through the drain valve.

Bsdpfx Ajvvuzcog Tecw
Optionally, a drying unit can be used to dry parts after cleaning.

After the cleaning cycle, the lift door is partially opened to allow steam extraction. Steam from the cleaning chamber can be evacuated using the steam extraction unit (DF-250S) or condensed via a steam condenser (FX6002) and returned to the tank. Both accessories are optional and not standard equipment.

Once steam extraction is complete, the lift door opens fully and the cleaning process is finished.
Optionally, a safety edge can be added to the lift door to automatically stop door movement if an object is detected in the doorway.

The cleaned parts can then be removed from the chamber onto a work surface or trolley.

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.