Tračna žaga za kovino

Pehaka USF-5R

Leto izdelave: 2025, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: GM3000.10000 H-202.41.10000.4E 160.20, Load capacity 3.2 t Reeving 4/1 Lifting height 10 m Lifting speeds 5/0.8 m/min Trolley travel speeds 20/5 m/min FEM Group 2M Operating voltage 400 V Control voltage 230 V Flange width 300 mm Immediately available from stock Hnsdpovx E Ncofx Af Tsg

Stanje: rabljeno, Leto izdelave: 1992, Clamping force 600 kN Clamping plate 460x460 mm Distance between columns 300x300 mm Machine weight approx. 4.5 t Hsdpfxsfrvzvj Af Tsng Clamping stroke 230 mm Ejector force 40 kN Ejector stroke 70 mm Mold height 120-350 mm Column diameter 56 mm Casting force 55 kN Casting stroke 130 mm Casting plunger diameter 45, 50, 55 mm Casting volume (DIN 24480) 76, 121, 165 cm² Specific casting pressure 345, 280, 231 kp/cm² Associated parting surface 174, 214, 260 cm² Withdrawal stroke 150 mm Used die casting machine DAW 50 with SBC2 control unit for use with zinc alloys. Available from used machinery stock. The machine is equipped with an electric furnace by Rauch MO50E and a used pneumatic spraying device 401 by Oskar Frech. Manufacturer's recommendation is an overhaul at the refurbishing facility. The scope of the overhaul can be agreed upon.

Stanje: rabljeno, Leto izdelave: 2018, DEMAG mostno dvigalo – Nosilnost 16 ton – Letnik 2018 Proizvajalec DEMAG Cranes & Components GmbH – Nemčija Tip Industrijsko motorizirano mostno dvigalo – enojni ali dvojni nosilec Industrijska uporaba Za težka dviganja v jeklarnah, proizvodnih delavnicah, kotlarstvih, splošni strojni obdelavi in logističnih skladiščih Glavne tehnične specifikacije: Hnsdpexb D Nvofx Af Tsg - Nazivna nosilnost: 16 ton (16.000 kg) - Leto izdelave: 2018 - Proizvajalec: DEMAG – globalni vodilni v industrijskem dviganju - Motorizirano premikanje po tirnicah - Električni vitel z jeklenico (DEMAG standard, velika nosilnost) - Napajanje: industrijski trifazni tok - Upravljanje: obesek ali radijsko daljinsko upravljanje (odvisno od konfiguracije) - Stanje: rabljeno – nedavno, robustna zasnova 🧩 Uporaba stroja DEMAG mostno dvigalo z nosilnostjo 16T je zasnovano za težka dviganja v zahtevnih industrijskih okoljih. Velika nosilnost ter sodobna konstrukcija zagotavljata učinkovitost, varnost in dolgo življenjsko dobo. ⚙️ Značilnosti / prednosti - Srednje visoka nosilnost (16T) za težje industrijske procese - Sodobna izdelava (2018) skladna z aktualnimi varnostnimi standardi - Vgrajeni DEMAG vitel in električni sistemi - Možnost integracije avtomatizacije in daljinskega upravljanja

Stanje: zelo dobro (rabljeno), Control: D.Electron Z 32 Center height: 220 mm Hjdpfxed Sitke Af Tjng Center distance: 1000 mm Swing diameter over bed: 440 mm Swing diameter over cross slide: 245 mm Travel path - Z axis: 750 mm Bed width: 320 mm Spindle mount: CL 6“ Spindle bore: 62 mm Spindle speed: 0 – 2000 rpm Rapid traverse X/Z: 7 m/min Tailstock quill stroke (manual): 200 mm Tailstock quill diameter: 80 mm Tailstock taper: MK 4

Stanje: novo, Leto izdelave: 2025, Centre height: 250 mm Spindle bore: 103 mm Centre distance: 1,000 mm Swing over bed: 500 mm Swing in gap: 710 mm Swing over cross slide: 300 mm Speed range: 9 - 1,600 rpm (24 steps) Spindle nose: DIN 55029 Camlock D1-8 Longitudinal feed range: 0.028 - 6.43 mm/rev; 93 steps Hnedpfxjd I A Dhe Af Teg Cross feed range: 0.012 - 2.73 mm/rev; 93 steps Metric threads: 0.5 - 224 mm; 48 steps Inch threads: 72 - 1/8 TPI; 49 steps Module threads: 0.5 - 112 mm; 42 steps Diametral pitch threads: 56 - 1/4 DP; 42 steps Quill diameter: 75 mm Quill travel: 150 mm Quill taper: Morse taper 5 Motor power: 7.5 kW Weight: 2,750.00 kg Dimensions: 2,500 x 1,100 x 1,380 mm

Stanje: rabljeno, Leto izdelave: 1999, Technical Details: X-axis travel: 3,500 mm Y-axis travel: 2,200 mm Z-axis travel: 1,200 mm C-axis: +/- 200° Control: Heidenhain TNC 426 Spindle speed (left rotation): max. 10,000 rpm Spindle speed (right rotation): max. 10,000 rpm Distance between columns: 2,500 mm Distance spindle / table (vertical): 1,230 mm Clamping area (table): 3,000 x 2,000 mm Table load capacity: 10 t Tool holder: HSK A 63 Feed rate (X/Y/Z): max. 20 m/min Compressed air: 8 bar Total power requirement: approx. 100 kW Machine weight approx.: 40,000 kg Machine dimensions: 18.0 x 6.0 x 5.8 m 5-Axis Gantry Milling Machine Milling spindle: Manufacturer Hauser, type HS 256A-01 Uni, max. speed 10,000 rpm, direct drive Milling head: Manufacturer Hamül, fork-type design, A-axis integrated, rotation angle +/- 110° Tool changer: Manufacturer Hamül, rotary indexing table with turntable design, for 32 tool positions Chip conveyors: 2 piece(s) hinge-belt conveyor, manufacturer DGS with water tank, insert length 8,500 mm Combined oil-water chiller unit by BKW, type DL 55V-2KK, output 2.41 l/min, for hydraulic oil and spindle cooling Coolant system: Belt filter, manufacturer DGS, type SBF 150 Operation: via operator console type Heidenhain LE 426 X-, Y-, and Z-axis with Heidenhain linear encoders Handheld operating device HR 410 Hodpfx Aeu Nc Emof Tjng Hydraulic weight compensation (Z-axis) Equipment: Enclosure (protective walls with windows and safety doors) Hydraulic system Work area lighting

Stanje: novo, Leto izdelave: 2023, Tube drilling machine, angle drilling machine, automatic drilling unit TDM100, manual operation, equipped with one drilling head AVAILABLE IMMEDIATELY FROM STOCK + CAN BE INSPECTED UNDER POWER - Minimum quantity lubrication - Manual material clamping - Manual feed - Maximum tube length 3,000mm (option: 6,000mm) - Positioning accuracy +/- 0.2mm - 10 stops (can be extended as required) - Manual loading and unloading of material - Drilling head swivels +/- 50° - Manual 360-degree tube swiveling device - Drilling unit power: 1 x 2.2 kW - Motor speed 295 - 2,950 rpm - Speed display on touch panel - Drilling unit lighting - Integrated tool cabinet - For round tubes up to 114mm - For square profiles up to 100 x 100mm Hodpfx Afolgvkis Tong - For flat material up to 100 x 15mm - For T-profiles up to 100 x 100 x 12mm - For L-profiles up to 100 x 100 x 8mm - For double posts up to 100 x 15mm - Flow drilling up to M12 - Drillings up to Ø 50mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Initial commissioning: 2000 Control: Heidenhain TNC 430 M Machine hours: 111,500 h X-axis: approx. 4,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 6,000 x 2,000 x 420 mm T-slot spacing: 18H12 / 250 mm Max. table load: 30,000 kg/m² 2-axis milling head AC3 Spindle power: 25 kW Spindle speed: max. 15,000 rpm Torque: 80 Nm Tool holder: HSK 63A Hnedpow Rl S Sjfx Af Tsg Tool clamping: hydraulic !!! Spindle freshly overhauled at the end of 2024 !!! Drives linear axes Feed rate X-, Y-axis: up to 20 m/min Feed rate Z-axis: up to 20 m/min Axis acceleration X, Y, Z: up to 1.5 m/s² Connection data Connected load: 40 kW Main fuse: approx. 80 A Dimensions, weights Space requirement machine with peripherals: approx. 8,500 x 5,600 x 4,945 mm Total weight: approx. 18,000 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: green Additional equipment - 3-sided enclosure, without extraction ducts - The illustrated additional clamping table is not included in the scope of delivery Condition of the machine Fully functional, in very good condition. The machine is still connected and immediately available.

Stanje: zelo dobro (rabljeno), Odlično ohranjen šest vretenski stružni avtomat INDEX MS 25 s šetimi prečnimi on šestimi vzdolžnimi vodili orodij. Hedpfeqhkukjx Af Teng Cena je po dogovoru glede na izbrano dodatno opremo: vpenjalne stročnice, orodja, transporter odrezkov itd. Stroj še obratuje v proizvodnji. Po dogovoru možen ogled.

Stanje: dober (rabljeno), Leto izdelave: 1963, Vertical turning lathe Manufacturer: JUNGENTHAL Type: DK 1400 Year: 1963 with 1-axis digital readout. Max. turning diameter: 1400 mm Faceplate: 1250 mm Automatic turret head Hnjdpfsvi Hryox Af Teg Spindle speeds: 3.5-180 rpm Feeds: 0.063 - 3.15 mm/rev Rapid traverse: 1800 mm/min For further data, see data sheet Machine documentation available. Dimensions: Length 4 m, Width 2.4 m, Height 3 m, Weight 16 t Good overall condition.