Stroj za valjanje navojev

PEE-WEE 62P12

Stanje: zelo dobro (rabljeno), Leto izdelave: 1971, Parallel lathe Ffedpow Az Hdjfx Afljt Brand: SAFOP Model: LEONARD 1500 Year: 1971 Specifications: Maximum swing over bed (4-guideway bed): 2,200 mm Maximum swing over carriage: 2,000 mm Maximum turning length: 10,000 mm Maximum load between centers (without steady rest): 15,000 kg Spindle speeds (4 ranges): 1-100 rpm Tailstock quill diameter: 190 mm Quill stroke: 310 mm Spindle motor power: 40 HP Equipped with: 4-jaw chuck dia. 2,000 mm 3 roller steady rests

Stanje: rabljeno, Technical Details: Ffjdpfx Aew Au I Ijfljt Ram stroke - max.: 250 mm Workpiece diameter - max.: 80 mm Max. workpiece length: 900 mm Total power requirement: 1.5 kW Machine weight approx.: 2.1 t Various accessories

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 5 Ffodpsup Hw Esfx Aflet MILLING SPINDLE - Tool holder: HSK63 - Spindle drive power: 17.5 kW - Spindle speed: 18,000 rpm LINEAR AXES - Travel X/Y/Z axes: 915 / 500 / 500 mm - Rapid traverse speed (X/Y/Z): 30 / 30 / 20 m/min TOOL CHANGER - Number of tools in magazine: 28 TABLE - Table size: Ø 630 mm - Max. table load: 500 kg ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power requirement: 26 kVA WEIGHT AND DIMENSIONS - Space requirements: 3620 x 3160 mm - Machine height: 3000 mm - Machine weight: 7,300 kg MACHINE HOURS - Operating hours: 48,894 h ACCESSORIES - Control: Heidenhain iTNC 530 - Coolant tank - Chip conveyor - Oil mist extractor: ELBARON - Coolant unit: HYDRAC COOLING FLKS 170S/2.3W/TP/400-50/1/14 - Workpiece probe system: Renishaw - Tool breakage monitoring: BLUM

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Fanuc 21T control Turning diameter: 158 mm Swing diameter over bed: 340 mm Spindle speed: 6,000 rpm 8-position turret Tailstock 3-jaw chuck, 2-jaw chuck, collet chuck Collets Various tool holders Fjdpfx Afewmzhpeleft

Stanje: rabljeno, Leto izdelave: 2000, Technical Details: Swing diameter over bed: 600 mm Swing diameter over cross slide: 260 mm Turning length: 610 mm Cross travel (X-axis): 160 mm Longitudinal travel (Z-axis): 610 mm Control: Siemens 810D Fsdpfx Afeu Ixwisljft Spindle speed: 1 – 6300 rpm, stepless Spindle torque: 86 Nm Spindle bore: Ø 42 mm Spindle nose diameter in front bearing: Ø 80 mm Feed drive AC: X/Z: 5000 / 7000 N Rapid traverse X/Z: 16 / 20 m/min Tool turret – number of stations: 12 / VDI 30 Tailstock quill: ISO MK4 Tailstock quill travel: 500 mm stroke Main spindle power: 7.5 kW (100% duty: 11 kW) Electrical specification – voltage/frequency: 3/PE ~400V and 50/60Hz Total power consumption: 20 kVA (11 kW) Machine weight approx.: 4.0 t Machine dimensions approx. LxWxH: 3.0 x 2.0 x 2.1 m The CNC lathe features a C-axis. Distance main spindle – tailstock: 805 mm Hydraulic power chuck Röhm Ø 160 mm (without jaws), max. speed 7,500 rpm Tailstock with live center Tool turret (12 positions available for driven tools) Currently, 8 tool holders installed in the magazine, of which 4 pieces with collet chuck Coolant system, coolant supply via the tool turret Control cabinet with Rittal cooling unit type SK3393100 Workpiece collection tray Machine lighting Accessories: 1x driven tool In standard condition.

Leto izdelave: 2019, Stanje: generalkompletno obnovljen (rabljeno), Overband plate magnet Fabrication in stainless steel 1.4301, fully welded 420 x 250 x 100 mm Completely welded housing Lifting eyes for suspension Fodpfxjd Dzaho Afljft

Stanje: rabljeno, Leto izdelave: 1982, Grinding length: 500 mm Grinding width: 225 mm Fjdpfxscxxtmj Afljft Workpiece height: 400 mm Total power requirement: 5.5 kW Machine weight approx.: 3.4 t with NC control NC81, table toothed belt drive 100-25000 mm/min, automatic infeed, electronic straight dressing with speed compensation, coolant pump, emergency stop safety device

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 5 MILLING SPINDLE - Tool holder: HSK63 - Spindle drive power: 17.5 kW - Spindle speed: 18,000 rpm LINEAR AXES - Travel X/Y/Z axes: 915 / 500 / 500 mm - Rapid traverse speed (X/Y/Z): 30 / 30 / 20 m/min TOOL CHANGER - Number of magazine tools: 28 TABLE - Table size: Ø 630 mm - Max. table load: 500 kg ELECTRICAL SUPPLY - Supply voltage: 400 V Fodpfoup Hwxjx Aflsft - Total connected load: 26 kVA WEIGHT AND DIMENSIONS - Required space: 3620 x 3160 mm - Machine height: 3000 mm - Machine weight: 7300 kg MACHINE HOURS - Operating hours: 50223 h ACCESSORIES - Control: Heidenhain iTNC 530 - Coolant tank - Chip conveyor - Oil mist extraction: ELBARON - Coolant unit: HYDRAC COOLING FLKS 170S/2.3W/TP/400-50/1/14 - Workpiece probe system: Renishaw - Tool breakage monitoring: BLUM

Stanje: rabljeno, Leto izdelave: 1995, premer struženja nad ležiščem sani: 500 mm, Universal lathe Make: ZMM, Model 500 Year: 1995 Technical Data Manufacturer: ZMM Sliven Model: Universal 500 Year of manufacture: 1995 Centre distance: 1000 mm Swing diameter over bed:500 mm Spindle bore: 73 mm Dimensions (LxWxH): 2.7 x 1.2 x 1.8 m Weight approx.: 3100 kg Equipment • 3-jaw chuck Röhm ZS 350 mm • Quick-change toolpost • Live centre Ffjdpfx Afewudhuelet • Coolant pump • Machine lamp All information is without guarantee. A powered demonstration is possible at any time in our showroom.

Leto izdelave: 2024, Stanje: novo, oris - Mini Extruder ESE 20/25 D Technical Data Screw diameter [mm]: 20 Screw length [L/D]: 25 Screw speed [rpm]: 20–200 Screw axial pressure [bar]: 300 continuous load, 350 maximum Drive: Three-phase motor with frequency inverter Drive power [kW]: max. 2.5 Reduction gearbox with integrated axial bearing Weight [kg]: approx. 160 Dimensions [L x W x H, mm]: approx. 1050 x 600 x 1590 Electrical connection: 3 / N / PE Supply voltage [V]: 400 at 50 Hz Control voltage [V]: 230 Temperature control with electric resistance heating bands in mica design. Fedjhx Elfopfx Aflsft Max. processing temperature [°C]: 300 Control cabinet and operator panel The extruder’s electrical installation is housed within the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; water connection must be provided by the customer, and a separate chiller for water cooling is not included in the offer. Extruder tooling is not included in the scope of supply.