Stroj za upogibanje zvitkov

PEDRAZZOLI Bend Master 42 MRV IMS CNC

Stanje: pripravljen za uporabo (rabljen), skupna širina: 3.000 mm, skupna višina: 5.350 mm, skupna dolžina: 15.000 mm, lastna masa: 20.000 kg, Valjčni transporter tipa G s peskalnimi kolesi Titan Za profile, pločevine, valje, cevi... maksimalna vhodna širina: 1100 mm maksimalna vhodna višina: 550 mm Podpfswikatox Aczepl 4 turbine, vsaka po 11 kW delovna hitrost: 1,4–2,4 m/min Skupna moč: 62 kW Namešča se na tla, temeljenje ni potrebno! Vključuje veliko izbiro novih rezervnih delov v vrednosti več kot 80.000 €!

Stanje: rabljeno, Leto izdelave: 2016, številka stroja/vozila: 0605-240010, FICEP Flex FRC 1201 Notching System The Ficep FRC 1201 notching and cutting system is part of the modern Ficep Flex series of notching machines. This advanced CNC-controlled notching and cutting system is designed for the fast thermal cutting and notching of H, U, L profiles, flat bars, and square tubes. The steel profile is positioned precisely at the cutting location within the system by a pulling clamping measuring carriage via the roller conveyor. A robotic arm equipped with cutting units (oxy-fuel or plasma) cuts the profiles at the selected positions. The cut or notched finished components either fall into the collection tray or are pushed out of the system by the measuring arm. Thermal Cutting Units: Pjdpfxotwm Ubj Aczjpl The Ficep profile beam notching system Flex FRC 1201 is equipped for thermal cutting using both oxy-fuel and/or plasma technology. As the plasma power source, a Hypertherm HYPERFORMANCE PLASMA HPR 260 XD suitable for material thicknesses up to 32 mm is used. Thicker materials or bevel cuts greater than 32 mm are processed with the oxy-fuel cutting unit. Transport System: On the infeed side before the Ficep Flex FRC notching system, there is a chain drag cross transporter with a length of 11,150 mm. The profiles (workpieces) can be conveyed in both directions. Subsequently, the profiles are transported into the machine on a robust roller conveyor using a clamping measuring carriage. The system is designed for profiles up to 12 m in length and thus features 12 m roller conveyors with a conveyor width of 1,300 mm on both the infeed and outfeed sides. For the removal of finished components on the outfeed side, there are four chain drag cross transporters, each with a length of 6,450 mm, following the notching system. Mitrol CNC Control and Pegaso Software: The system is operated via a modern CNC control unit from Mitrol. The reliable CNC controller is manufactured by Ficep’s own supplier Mitrol and features Pegaso software, including remote maintenance capability and data transfer interface. Torit DCE Filter Unit The extraction filter unit for dust removal is supplied by Donaldson Torit DCE. Safety: Provided by fencing and light barriers Max. profile cross-section: 1,220 x 600 mm Min. material length: 2,500 mm Working height: 865 mm Weight: 7,000 kg Weight of burner unit cover: 1,200 kg This modern Ficep Flex FRC 1201 notching system is in very good condition.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, 2018 KALTENBACH KDP1036 CNC LINIJA ZA VRTANJE / REZKANJE / OZNAČEVANJE – KBS 1051 REZALNA LINIJA. PREČNE DOVAJALNE TRANZFERJE T13 VLOŽNA KAPACITETA 20,5 METRA. MERJENJE MATERIALA S PODAJO GRIPPER KDP1036 3 OSI. SAMODEJNI MENJALNIK ORODJA. 500 MM PODOS ZA REZKANJE, VRTANJE, OZNAČEVANJE IN NAVOJENJE. INTEGRIRANI TRANSPORTER OSTRUŽKOV KBS 1051 ŽAGA HORIZONTALNO IN VERTIKALNO VKLENJANJE AVTOMATSKI NADZOR NAPREDOVANJA Samodejna nastavitev kota žaginega traku LS 270 MERILNA GLAVA IZHOD 19.750 mm ODVODNI PREČNI TRANZFERJI T13 Ppsdoxmvm Rspfx Aczjl

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, vrsta aktuacije: električni, Premer cevi (maks.): 65 mm, Dolžina cevi (maks.): 3.000 mm, Debelina stene cevi (maks.): 3 mm, Kot upogiba (maks.): 190 °, radij upogibanja (maks.): 250 mm, število osi: 5, trajanje garancije: 12 meseci, Oprema: CE označba, dokumentacija / priročnik, nožno daljinsko upravljanje, nujno zaustavitev, STANDARD EQUIPMENT • 3 sets of dies (1 set of rolling dies and 2 sets of bending dies, or 3 sets of bending dies, as per required dimensions) • 5-axis servo control (Y, B, C, H, V) • Servo motor-driven feeding axis • Servo motor-driven rotation axis • Servo motor-driven bending axis • Servo motor-driven H and V axes • 21” TFT touchscreen mobile CNC control unit • Rolling capability • 3D bending simulation • Collision simulation • Daily, weekly, and monthly total operation status reports • Calculation of workpiece length • Calculation of estimated bending time • Conversion from X-Y-Z to Y-B-C • Emergency-stop mobile foot pedal • Remote assistance • Mandrel and non-mandrel bending • Safety plate behind the bending head • Hydraulic clamping • Hydraulic mandrel • Hydraulic support • Hydraulic linear slide system • Hydraulic gripper clamp • Electric panel safety lock and key lockable panel • Electric system cooler • Overload protection • Detailed operation reports sent automatically OPTIONAL EQUIPMENT (Not Included in Price) • Additional die sets • Safety mat (750 x 1000 mm) • Safety mat (1000 x 1500 mm) • Hydraulic oil heater • Extra mandrel length (up to 6 m) - per meter • Ball mandrel and wiper die • Automatic mandrel lubrication system (for suitable pipe diameters) • Hydraulic oil cooler CAPACITY MB-65 CNC/5 AXIS Maximum Capacity mm Ø65x3mm Maximum Bending Radius mm 250mm Maximum Bending Angle ° 190° Hydraulic Pressure bar 50-200 Working Length mm 3000 Rotation Tolerances Adjustable Bending Power kW 22.5 Dimensions (LxWxH) mm 6350x1400x1600 Ppjdpoxircgofx Aczel Weight kg 3950

Stanje: dober (rabljeno), Leto izdelave: 2008, Kaveljska peskalna naprava 2700x3500 z motoriziranim kavljem in žerjavom Proizvajalec: CARLO BANFI Tip: Kaveljski tip Podpfx Aowq Ru Hjczjpl Največji premer obdelovanca: 2700 mm Največja višina obdelovanca: 3500 mm Največja teža obdelovanca: 12.000 kg Ročna peskalna komora: DA Komora za odpihavanje: DA Širina odprtine stroja: Število turbin: 16 Tip turbine: 360 Premer kolesa turbine: 360 mm Moč turbine: 16 x 11 kW Največji pretok turbine: Tip transportne tirnice: I Sistem čiščenja: zračna prha Fundacija: DA Zaščita ohišja: mangan + guma Filter: DA Skupna širina stroja: Skupna višina stroja: Skupna dolžina stroja:

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Bandsäge MACC SPECIAL 411 CSO, Baujahr 2019 Zustand: sehr gut - Sägemaschine mit schnittführendem Sägeband, hydraulisch gesteuertem Absenken - Spannstock manuell betätigt - Manueller Rücklauf des Sägekopfs - Vertikale Rotation auf Bolzen mit spielfreien, einstellbaren Kegelrollenlagern - Hochleistungs-Bandantrieb durch Zweigangmotor und Spezialgetriebe mit Bronzeschnecke, gehärteter und geschliffener Schneckenwelle - Blattspannung per Handrad manuell einstellbar, Überwachung durch Endschalter Ppodpfx Aopmaubeczol - Schraubstock mit Schnellspannvorrichtung - Unfallschutzvorrichtungen an Schwungradabdeckung, Bedienelement, Sägeband und Außenschutz - Hydraulikzylinder für kontrollierten Absenkvorgang - Schnittstärke: 1,2 mm - Schnittbereich: 45° links, 60° rechts - Verstellanschlag für Serienschnitte gleicher Länge - 24 V Steuerspannung (Niederspannung) - 0,06 kW Antriebspumpe für Bandkühlung - Untergestell mit Späneauffangwanne und herausnehmbarem Kühlmitteltank - Zuführförderer

Stanje: dober (rabljeno), Leto izdelave: 2016, FICEP 1201 FRC Minimalni profil mm: 80 x 42 Maksimalni profil mm: 1220 x 60 1 x gorilnik za rezanje z gorljivim plinom (OXY FUEL) 1 x plazemska gorilna naprava HYPERTHERM HPR 260XD Pedpfeva Hfnjx Aczepl Sistem za odsesavanje prahu.

Stanje: dober (rabljeno), številka stroja/vozila: 550C08, A used PEDDINGHAUS punching machine with large throat depth and spacious support table equipped with stops. Punching capacity: 45 tons Stroke rate: 40 strokes/min Psdpfxsd Hxrto Aczepl Throat depth: 762 mm Working height: 1,110 mm

Leto izdelave: 2014, Stanje: pripravljen za uporabo (rabljen), A complete CNC double-gantry plasma cutting system from Microstep with oxy-fuel torch for nesting, bevel cutting, and pipe processing is available. 1) Plasma cutting machine, max. processing length: 16,500 mm, max. processing width: 2,500 mm, max. processing width including channel: 3,700 mm, max. material thickness stainless steel/mild steel: 20 mm/40 mm, number of gantries: 2. Gantry 1: equipped with a plasma rotator and a Kjellberg HiFocus 280i neo plasma power source. Gantry 2: fully automatic acetylene oxy-fuel torch with the option to install a second torch carriage. Pipe cutting device: pipe diameter range: 30 mm–700 mm, max. pipe length: 16,500 mm, operating hours: approx. 15,000 h. 2) Donaldson Cyclopeel DFPRO 16 filtration system, air volume: 16,000 m³/h, filter elements: 16. Documentation available. On-site inspection possible. Expected to be available from late 2025/early 2026. Images are from commissioning in 2014. Ppodpfx Acowmqwyjzol

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2016, Two independently operating heavy-duty transport carts (A and B) for loads up to 35t. The transporters are supported by four pivoting heavy-duty wheels and two omnidirectional drive wheels (allowing movement in any direction). The drive wheels are pneumatically pressed onto the ground to ensure optimal traction. The rotation of the two drive wheels activates the various drive modes of the transporters. This design enables a highly flexible transporter capable of longitudinal, lateral, and on-the-spot rotation. Each transporter is equipped with an integrated 35-ton scissor lift table, whose contact surfaces are fitted with heat sinks to dissipate heat released by the pallet (when transporting warm/hot materials). The lifting system is powered by a central motor, with force transmission via two gearboxes and axles running through the frame. These axles drive four shafts located at the corners of the transporter. Depending on the transported goods, a custom fixture can be manufactured to be carried by the lifting system. The entire system is protected by aluminum covers, each cover is numbered to ensure easy reassembly in the correct position after maintenance. The conveyors were designed to move a maximum load of 35 tons at a top speed of 1.5 km/h in manual mode and 1 km/h in semi-automatic mode. The speed is infinitely adjustable using the manual joystick control. Unloaded and in manual mode, the transporters can reach 2.5 km/h, and in semi-automatic mode the speed is limited to 1.5 km/h. Control: SIEMENS SIMATIC Ppedoxa Endopfx Aczol Operation: Radio remote control Drive: Battery-operated Dimensions per vehicle: approx. 3600 x 2500 x 800 mm (Former new price approx. 1.2 million EUR)