PANKOKE & KOCHSIEK BFA 05 Vrtanje

PANKOKE & KOCHSIEK BFA 03 PANKOKE & KOCHSIEK BFA 05 Drilling

Stanje: rabljeno, SPE Renergi nizkotemperaturni sušilnik. Renergi sušilnik se uporablja za sušenje žagovine in drugih materialov za proizvodnjo biogoriv. Sušilnik lahko suši žagovino, lubje ali lesne sekance, zmanjšujoč vsebnost vlage približno s 50 % na približno 10 %. Ta nizkotemperaturni sušilnik uporablja toplo (ali vročo) vodo s priporočeno temperaturo od 65 °C naprej. Najvišja temperatura vode: 110 °C. Varnost napajanja: Sušilnik sme biti priključen izključno na trifazno omrežje 3x400 V AC (630 A), 50/60 Hz, z ločenim zaščitnim ozemljitvenim vodnikom. Podatki o napajanju: • Napetost: 400 V AC, trifazno • Priporočene varovalke: največ 3x630 A • Tipična poraba energije: 200 kW Dimenzije sušilnika so cca 17,4 x 5,7 m, višina 10,7 m. Potrebna talna površina znaša približno 21,4 x 8,0 m. Višina stropa naj bo vsaj 15 m (oziroma 4 m nad vrhom dovoda materiala). Dovod zraka: Za obratovanje naprave je potreben dovod vsaj 24 kg/s svežega zraka (kar ustreza 20 nm3/s ali 72.000 nm3/h). Pretok zraka: največ 200 l/min Tlak zraka: najmanj 4,5 bar, priporočljivo 6,0–8,0 bar Vodni dovod: topla voda, pretok 32 dm3/s Tlak vode: najmanj 1,5 bar, največ 6,0 bar Obratovalno temperaturno območje: • Temperatura dovedenega zraka: -20 °C do +50 °C Pgjdpfxjwp Rqfo Agxek • Relativna vlažnost: 0 % do 60 % Surovina/material: • Relativna vlažnost: 45–55 % (teža) • Zahtevana vlažnost po sušenju: 8–15 % Zmogljivost: • Dvo-celični sušilnik širine 4 m lahko praviloma obdela 2.400 kg materiala z vsebnostjo vlage 55 % v vsaki seriji • Sušilnik lahko posuši 6.000 kg surovine (od 55 % na 10 % vode) v eni uri SRE sušilnik je izdelan skladno z evropskimi direktivami in ustreza zahtevam: • Direktiva o strojih 2006/42/ES • LVD 2006/95/ES • EMC 2004/108/ES Sušilnik se nahaja v občini Straupe, okrožje Cēsis, LV-4152, Latvija. Ogled je možen ob delavnikih od 8.00 do 17.00, predhodno po dogovoru. Sušilnik je že demontiran. Na voljo so vsi električni shematski prikazi, navodila za uporabo in servisna dokumentacija. Po dogovoru zagotovimo kontakt z uporabnikom tovrstnega sušilnika za strokovno svetovanje. Cena: 20.000,00 EUR (DDV ni vključen)

Stanje: novo, Table length: 2,200 mm Table width: 1,500 mm Lifting height: 1,850 mm Load capacity: 2,000 kg Minimum lifting height: 260 mm Total power requirement: 1.5 kW Lifting speed – upwards unloaded: 40 sec Lifting speed – downwards unloaded: 30 sec Connection voltage: 400 V Machine weight approx. 0.45 t Pjdpoupxwkefx Agxegk Space requirement approx. 2.2 x 1.5 x 0.26 m The hydraulic lift tables are electrically powered and operated. Equipped with a contact strip for safe lowering operation. Highly versatile – suitable for workshops, assembly departments, loading bays, and more.

Stanje: generalkompletno obnovljen (rabljeno), VERSCHIEDENE MOTORTYPEN UND SCHLITTEN FÜR CELASCHI DET GEBRAUCHT, KOMPLETT GENERALÜBERHOLT Pgsdpfodvlcyjx Agxjk

Stanje: dober (rabljeno), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, Rabljena potopna naprava, proizvajalec Wichmann, tip WH 6,0 - 6,0 m dolga x 1,75 m široka x 1,75 m visoka, uporabna mera; - Leto izdelave: 1995; - Krmiljenje s PLC Moeller PS4 z izbiro programa; Pgsdpfjx Akq Nox Agxek - Lesena podlaga pribl. 5 m dolga, pritisno držalo pribl. 5 m dolgo z okvirjem; - Dvojna stena s sondo za zaznavanje puščanja, - notranjost deloma zarjavela, - Transportni podatki: pribl. 7,50 m dolžine, 2,44 m širine, 2,98 m višine z demontiranimi vodili, - Teža pribl. 10,0 ton; - Naprava prazna, brezplačno natovarjanje na tovornjak.

Stanje: dober (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Proizvodna linija za pelete na osnovi italijanske stiskalnice Zepi, z mlinom na kladiva, hladilnikom peletov in sejalnikom. Stroji so zelo zmogljivi in zanesljivi. Nekateri deli, kot je mlin na kladiva, so popolnoma obnovljeni. Leto izdelave 2007. Psdevx S Ryopfx Agxjgk

Leto izdelave: 1991, stanje: skoraj kot novo (rabljeno), skupna masa: 1.420 kg, največja hitrost vrtenja: 1.485 obr/min, 3 stainless steel spiral volute process pumps 2 x CPK-CM 250-315, year of manufacture 1991 1 x CPKN-C1 250-315, year of manufacture 2011 !!! Price per unit !!! Pumps were operated on a test bench and all have very low operating hours! See pictures!! Flow rate: 1001 m³/h (278 liters/second) Delivery head / Pressure: 18 m / 1.8 bar Pump speed: 1485 rpm NPSH: 5.00 m Shaft seal: Single-acting mechanical seal with flushing water Manufacturer: Burgmann Impeller type: Closed radial impeller Impeller diameter: 324 mm Bearing type: Rolling bearing Lubrication: Oil Oil level monitoring Materials: 1.4408 (AISI 316) Pump casing: 1.4408 (AISI 316) Wear plate: 1.4408 (AISI 316) Pressure cover: 1.4408 (AISI 316) Shaft: Heat-treated steel C45+N Impeller: 1.4408 (AISI 316) Bearing lantern: Cast iron JL1040 Shaft sleeve: CrNiMo steel Suction nozzle nominal diameter: DN 300 Discharge nozzle nominal diameter: DN 250 Nominal pressure suction side: PN 16 Nominal pressure discharge side: PN 16 Coupling manufacturer: Flender Coupling type: Eupex NH without spacer sleeve Baseplate: Painted cast iron Motor manufacturer: VEM K21R 280S4-Z Efficiency class: IE 0 Pgodpoqabiajfx Agxok Motor speed: 1480 rpm Frequency: 50 Hz Rated voltage: 400 / 690 V Rated motor output P2: 75 kW Thermal class: F Motor protection: IP55 Power factor (cos phi): 0.86 Dimensions: Length: 2120 mm Width: 950 mm Height: 1090 mm Weight: 1420 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Machining Center Manufacturer: Weeke Model: BHX 500 Year of Manufacture: 2008 Working Range X: 2,500 mm Working Range Y: 1,300 mm Pgjdpfxoh E Sghe Agxok Working Range Z: 4 - 80 mm Number of Milling Units: 2 Number of Drilling Units: 2 Vertical Drilling Spindles: 72 Horizontal Drilling Spindles (X): 16 Horizontal Drilling Spindles (Y): 4 Grooving Saw: Swivels 90° X-Axis Speed: 130 m/min Y-Axis Speed: 80 m/min Z1-Axis Speed: 50 m/min Z2-Axis Speed: 27 m/min Spindle Speed: 18,000 rpm Dismantled - immediately available

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 22.605 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, teža bale: 1.400 kg, skupna masa: 36.000 kg, kapaciteta rezervoarja za olje: 1.300 l, For sale: Fully reconditioned baler with 100 t pressing force, large bale size 1100 x 1100 mm, 75 kW drive power, and 10-fold cross-tying. Technical data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main ram pressing force: 100 t Pre-pressing force: 50 t Operating hours: 22,605 hours Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Total connected load: 126 kW Total current draw: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a bulk density of 30 kg/m³: approx. 16 t/hour bulk density of 50 kg/m³: approx. 25 t/hour bulk density of 100 kg/m³: approx. 47 t/hour Bale weights up to 1,400 kg, depending on material and bale length Hydraulic tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Installed baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Notes: The baler was partially reconditioned, serviced, tested after completion, and stored in our workshop. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment work was performed: - Removal of rust and partial repainting of the press - Complete drainage of hydraulic oil tank, oil and air filters replaced - New hydraulic oil filled - All hydraulic hoses replaced - Main hydraulic cylinder, two pre-press flap cylinders, and compression channel cylinder removed, disassembled, inspected, cylinder tubes honed, all seal kits replaced, and final pressure test conducted - Pre-press flap disassembled with bearings and bearing blocks; first and third arc segments removed and rewelded - Both shaft bearings on the pre-press flap replaced - Upper material guide on pre-press flap frame replaced - Press ram dismantled, inspected, and both front guide rollers replaced - Material guides and wear plates on sides and base of press ram removed and rewelded - Horizontal and vertical needle and tying units dismantled, disassembled, inspected; plastic slide plates, twister shaft bearings, and wire deflector pulleys with bearings in the needle heads replaced - Both bronze slide rails left and right in the frame cover for the press ram replaced - Both wire deflection units left and right, with bale retention clamps completely replaced - Wire feed unit including hydraulic cylinder under needle passages completely renewed - Wire feed tracks in the floor and sidewalls of the press channel welded up and smoothed Podpfx Agevf E Avjxegk - General maintenance and servicing carried out according to manufacturer’s specifications - Baler tested in manual and automatic mode after refurbishment, accepted, and stored We accept no liability for the technical data or any potential errors.

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Cambio 500 debarking system consisting of: Pjdpfxowxdims Agxegk Infeed centering device. Cambio 500: Rotor opening 495 mm. Minimum log diameter 90 mm. Drive motor 55 kW. Feed motor 11 kW. Feed speed 80 m/min. Hydraulic rotor and feed rollers. Outfeed control unit. Tilting bin for long timber. Spare parts.

Stanje: novo, Leto izdelave: 2022, Dowel hole boring unit: no Drilling depth: 150 mm Slot length: 180 mm Height adjustment travel: 145 mm Motor power: 1.5 kW Pgedpogq Un Ajfx Agxok Speed: 3000 rpm Extraction port: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 240 kg