Drsna namizna žaga

Panhans EURO10

Stanje: novo, Leto izdelave: 2026, Construction size: 6 Nominal heat output: 170 kW -- Complies with BImSchV Stage 2 and CE -- Combustion chamber fully lined with fireclay Suitable for rooms: 4,800 m³ (according to DIN) Fuel: Firewood, chipboard, wood chips, briquetted wood shavings Fuel consumption: 40 - 50 kg/h Fan air output, free blowing: 14,000 m³/h Discharge opening: Ø 700 mm Hjdjdlhdbspfx Afasp Flue pipe connection: Ø 220 mm Weight: 2,150 kg PLC control cabinet: 380 Volt

Stanje: rabljeno, Leto izdelave: 2018, Startech CN MAIN FEATURES Flexible and individually configured production combined with speed and precision. Drilling from above with reference to the top side of the panel enables absolutely precise machining. Numerical control with 7" color display: simple and intuitive. TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm: 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm: 300 x 90 x 10 Working area drilling/grooving mm: 0 x 800 / 0 x 800 X-axis travel mm: 750 Max. traversing speed X-Y axes m/min: 25 DRILLING UNIT Vertical spindles Quantity: 7 (4X-4Y, one in common) Horizontal spindles (along Y-axis) Quantity: 2 (1+1) Horizontal spindles (along X-axis) Quantity: 1 Fixed grooving saw (direction) X Diameter of grooving saw mm: 100 Max. thickness grooving saw mm: 5 Motor power kW (HP): 1.5 (2) Spindle speed rpm: 3350 Saw blade speed rpm: 4300 INSTALLATION Power supply V (Hz): 380 / 400 (50 / 60) Installed power KVA: 4.5 Compressed air requirement bar: 6 Air consumption Nl/cycle: 90 Extraction requirement m³/h: 1200 Extraction air velocity m/sec: 20 Extraction nozzle diameter mm: 120 GENERAL FEATURES Universal CNC drilling machine with a worktable featuring a fixed gantry and movable workpiece for the following operations: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Grooving operations with integrated grooving saw in 'X' direction Self-supporting construction: Machine base made of steel tubular structure providing a large base for accommodating the worktable. The structure is positioned on 3 self-leveling feet. The electrical cabinet is integrated into the machine frame. Medium bakelite support table "Easy Motion": - an MDF sector for carrying out through drilling, which can be automatically swung away for horizontal drilling - an infeed roller to facilitate panel feeding - a rear roller conveyor to assist smooth panel movement - left and right stops - a central aligner with manual adjustment It is necessary to use the left and right stops to horizontally drill the two opposite panel sides in the 'X' direction. Panel positioning along the X-axis by means of suction. Carriage assembly: This is a gantry structure made of steel tube. The main working unit is installed on the gantry. F10L drilling unit Includes: - 7 independent vertical spindles - Drill holder D10 mm - Distance between spindles 32 mm - 2 horizontal drill heads, 1 in X direction with one drill, 1 double drill head in Y direction (1+1 drill holder D10 mm) - Speed 3350 rpm - 1 integrated saw unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic stroke per spindle 70 mm - Horizontal pneumatic stroke of drill unit Positioning of workpiece and movement of working unit: A CNC-controlled suction unit clamps the workpiece and positions it sequentially under the working unit during machining. Movement in X and Y axes is via THK guides with transmission on reinforced toothed racks. Movement in the Z axis is pneumatic on "ball-bushing" guides, with adjustable positioning at the stop. Positioning of the work units is performed using state-of-the-art technology and drives. - CONTROL: The control system has been specifically developed for industrial applications. Hsdpfx Asvwbp Aefaep

Stanje: zelo dobro (rabljeno), Tenoning and Slot Mortising Machine WEINIG Type 51 Swiveling studio window device with digital angle display Roller table with automatic feed, 6 m/min Roller table length approx. 2,100 mm Pneumatic workpiece clamping automatic counter block changeover Crosscut saw Pneumatically operated 4-position revolving turret Motor approx. 3 kW / 380 / 400 V / 50 Hz Saw blade diameter = 350 mm Saw blade speed 2,800 rpm Hsdpfx Aev Tb Hgjfaop Slotting spindle Diameter D = 50 mm Clamping length 320 mm Spindle motor approx. 11 kW / 380 / 400 V / 50 Hz Spindle speed 3,000 rpm Maximum tool diameter 320 mm Length stop system Machine including operating tools Installation dimensions (L x W) approx. = 2700 x 2800 mm Weight approx. 2000 kg Note on used machines: • Technical specifications subject to error and prior sale. • Stated prices are ex location – loaded free onto truck. • The machine has been cleaned and function-tested. • All machines are sold as seen, with no guarantee or warranty of any kind. Buyers are welcome to inspect the machines at site. • Special agreements are only valid in written form. (We will only respond to inquiries including your address and telephone number!)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, dolžina rezanja (maks.): 3.300 mm, Ta HOLZMA HPL 23/X/33/22/30/L je bila izdelana leta 2000. Gre za robustno rabljeno krožno žago za razrez plošč z dolžino reza 3300 mm, tremi mizami z zračnimi blazinami in dvižno mizo velikosti 3300 x 2200 mm. Opremljena je z glavnim žagalnim agregatom z močjo 18 kW ter predrezilom z močjo 2,2 kW, upravljanim preko sistema CADMATIC. Za dodatne informacije o tem stroju nas kontaktirajte. Hjdpfx Afjx D Hlfoasp

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Pneumatic Pressure Clamp ensuring precise adherence of the workpiece to the table of the panel saw. This results in enhanced precision and cutting quality, facilitating and accelerating the panel sizing process. The clamp is very simple to install and operate. Application of a woodworking pneumatic pressure clamp for a panel saw: Lack of proper pressure securing the panel to the panel saw table is an issue that brings several potential consequences, significantly affecting the efficiency and quality of the cutting process. These problems include: Uncontrolled chipping: Without a solid pressure clamp, the panel may not be stably fixed on the table. In such cases, cutting can result in uncontrolled chipping, posing hazards to operators and potentially damaging tools and workpieces, thereby increasing production costs. Excessive material waste: Insufficient pressure may cause the panel to shift during cutting, leading to material losses since the misplaced panel can be cut incorrectly, requiring additional trimming or even scrapping the entire piece. Edge fraying: An unstable clamp can cause vibrations and inaccurate cutting. This, in turn, leads to edge fraying, negatively affecting the appearance and functionality of the workpieces, especially for finishing materials. Benefits of using a dual-section, 3200 mm pneumatic pressure clamp for panel saws: The solution to these issues is the use of a pneumatic pressure clamp which ensures the material is firmly pressed against the table throughout the cutting process. The resulting benefits include: Increased cutting precision: The pneumatic clamp allows secure and even fixing of the material to the table, resulting in higher cutting accuracy and eliminating uncontrolled chipping and edge fraying. Improved cut quality: Thanks to stable holding, the cutting quality is significantly enhanced. Panels are cut evenly without damage, increasing their value and aesthetics. Hodpfx Afsvxtcqeasp Faster and easier panel sizing: With secure clamping, operators can work more efficiently and safely, speeding up the entire sizing process and thus increasing production throughput. Simple installation and operation: The pneumatic clamp is straightforward to install and operate, requiring no complex procedures and providing easy control. 2-zone clamping: The pneumatic clamp features two zones, with each side (2 cylinders per side) of the saw table independently controlled. This offers greater flexibility and allows adaptation of the clamping force to different material types and production requirements. In summary, the pneumatic pressure clamp is a reliable solution that improves the quality, precision, and efficiency of panel cutting, leading to time and material savings while minimizing the risk of damage and accidents. Technical specifications: Clamping length: 3200 mm Material height: 100 mm Number of cylinders: 4 Operating pressure: 2.0 bar Manufacturer: Cormak

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1987, številka stroja/vozila: 402, Funkcionalnost: popolnoma funkcionalen, največja višina reza: 70 mm, največja širina rezanja: 3.200 mm, premer žaginega lista: 300 mm, dolžina rezanja (maks.): 3.200 mm, višina reza z zareznim rezilom (max.): 70 mm, Oprema: dozator, Cutting length: 3200 mm Cutting width: 3200 mm Width stop: Gear motor adjustment Main saw unit: Saw blade Ø 300 mm, Ø 30 mm bore, Z=60 teeth, SH 70 Scoring unit: Yes - Saw blade Ø 125 mm, Ø 20 mm bore, Z=24 teeth Softforming unit: No Side pressure device: Yes - Model: FR 50/100 Offcut cutting device: Yes – Pressure beam recess Hodpfxjvi H Die Afaep Veneer cutting device: Yes Edging cutting device: Yes – Distances: 145/525/1790 mm Front support table: 400 x 1400 mm – 2 pieces Rear support table: 240 x 2960 mm – 1 piece Rear support rails: 40 x 2960 mm – 5 pieces Angle table: 480 x 1400 mm on the left Angle fence: extendable Clamping grippers: 4 pieces – floating – distances 70/400/1600/2800 mm Stop jaw: 2 pieces – fixed – distances 1000/2200 mm Additional rear support foot: No – 3 feet Safety guard: Yes Foot switch: No Cutting direction: left to right Unit can emerge in any position: No automatic lowering with saw overrun: No 3-level cutting height adjustment: No Main circular saw: 7.5 kW, 380 V, 2870 rpm, 50 Hz Scoring saw: 1.1 kW, 380 V, 2800 rpm, 50 Hz Width stop adjustment motor with torque compensator: fine adjustment motor: 0.12 kW, 380 V, 1380 rpm, main motor: 0.35 kW, 380 V, 1350 rpm.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, Dust Extractor for Blast Cabinet Sandblasters – Complete Unit with Motor and Filter This dust collector is a comprehensive extraction solution equipped with a motor and filter, ensuring efficient removal of dust and particles generated during blasting operations. It significantly improves visibility inside the blast cabinet and eliminates dust leakage, creating safer and more hygienic working conditions. Particularly suitable for large-volume blast cabinets, this unit ensures a clean environment and optimal operational safety. Device Description The dust extractor designed for blast cabinet sandblasters is a fully integrated solution featuring a powerful motor and high-efficiency filter. It is ideal for a wide range of blasting applications, especially in large-scale enclosures where dust management is crucial. The advanced design efficiently draws dust directly from the sandblaster, resulting in improved visibility during operation and preventing dust from escaping the working area. This enhances workplace hygiene and safety by providing a cleaner and healthier atmosphere for operators. The built-in motor delivers robust suction performance, ensuring reliable and effective extraction of media dust, while the filter retains fine particles to prevent their recirculation into the cabin’s air. This offers superior protection for operators against inhalation of hazardous substances and maintains high air quality within the blasting area. The dust collector is not only a highly effective cleaning solution, but it also enhances occupational safety and increases both the efficiency and precision of blasting operations. Technical Data Extraction Power: 1100W Airflow Capacity: 3 m³/min Power Supply: 230 V / 50 Hz Noise Level: 85 dB Hsdpferh E Azex Afaop Inlet Diameter: 52 mm Handle Length: 280 mm Collector Dimensions (H x D): 730 x 260 mm Filter Dimensions (H x D): 310 x 170 mm Weight: 9.5 kg Please note: The price stated is net (excl. VAT) and does not include shipping costs. For more information, please contact us via phone or email. Visit our website to view the full product range.

Stanje: dober (rabljeno), Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, tie rod cylinder Hjdpfov Tla Rjx Afaep - Hydraulic cylinder: tie rod cylinder, stroke 185 mm - Piston rod: Ø 20 mm / M20 - Dimensions: 475/110/H65 mm - Weight: 4.5 kg

Stanje: rabljeno, Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, tie-rod cylinder, equalizer cylinder - Hydraulic cylinder: tie-rod cylinder, stroke 126 mm - Type: unfortunately no type designation - Piston rod: Ø 38 mm Hodpev N Uwwsfx Afaep - Mountings: Ø 25/30 mm / Distance: retracted 735 mm - Dimensions: 785/75/H107 mm - Weight: 13.3 kg