Rezkalni stroj za utore

Panhans 116

Stanje: dober (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, Zaradi likvidacije podjetja: Panhans model 116, 380 V, naprava za vrtanje mozničnih lukenj 16-22-25-32, 2x vpenjala za material, mitrski omejevalnik, dolžinski omejevalnik, letnik 1985, moč 1,5 kW. Cgsdpfjy Iurwjx Ahxet

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, obratovalne ure: 1 h, Exhibition Piece: KAESER Screw Compressor System SXC 8 (11 bar) Immediately available with integrated refrigeration dryer with 215 liter compressed air receiver equipped with electrically controlled condensate drain with Sigma Control 2 controller (No connection cable included!) Cjdpehhiw Nsfx Ahxsgt Year of manufacture: 2024 Operating hours: 0.5 h Technical Data: Free air delivery at 10 bar: 0.67 m³/min Rated motor output: 5.5 kW Electrical supply: 400 V / 3 ph / 50 Hz Dimensions (W x D x H in mm): 620 x 980 x 1480 Weight: 260 kg Compressed air receiver: 215 liters Compressed air connection: G 3/4" Sound pressure level: 69 dB(A) Refrigeration dryer pressure dew point: 6°C Visit our showroom. We always have a large selection of new and used compressors in stock! Immediately available.

Stanje: zelo dobro (rabljeno), Drilling depth: 14 cm Csdpfxsupz Tze Ahxegt Drilling height: 14 cm Drilling width: 23 cm 2 kW motor Very good condition.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1982, Panhans stroj za vrtanje utorov Tip: 116 - Šolski stroj - Dvoročno upravljanje Naprava za vrtanje moznikov: razmak 16, 22, 25, 32 Globina vrtanja: 145 mm Cjdpex Nrhrsfx Ahxegt Dolžina utora: 240 mm Višinsko nastavljiv hod: 135 mm Moč motorja: 1,5 kW Število vrtljajev: 2800 obr/min Pritisk: ročni Priključek za odsesavanje: 100 mm Dolžina stroja: 1280 mm Širina stroja: 960 mm Teža: 300 kg Lokacija: na zalogi 54634 Bitburg - takoj na voljo -

Stanje: rabljeno, Leto izdelave: 2024, Dowel Hole Boring Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW complete in standard configuration including: - Fully automatic electronic control with pulse operation via foot pedal for clamping-drilling-unclamping, with electric skip function. - Automatic return of the drilling unit after reaching the set drilling depth. - Automatic extension of borehole depth when drilling on the end-face. This eliminates the need to reset borehole depth when switching from wide-face to end-face drilling (+10 mm, for example, with dowel length 35 mm, drilling depth wide-face 14 mm, and drilling depth end-face 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm), including 21 quick-change chucks (Ganner system) for easy drill bit changes. Cgedpfoxnlfljx Ahxet - Simple pivoting of the drilling unit from 0° to 90°, assisted by gas cylinder. - 1 clamping rail adjustable on the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. Ideal positioning system consisting of: - 1 stop ruler 1800 mm for drilling shelves and intermediate panels, (aluminium profile 40x40 mm) with 3 drop-in stops. - With quick-change system, easily swapped from right to left stop side for mirror-image drilling of shelves and intermediate panels in carcass constructions. Also suitable for line boring in 32 mm system. - Side stops and position adjustments, as well as drilling height adjustment via mechanical digital counters on the support table. - Side stops can be easily pivoted away for quick changeover from carcass to frame and line drilling operations. - Clamping arms for clamping rail designed for line boring positions up to max. 300 mm. - Ideal three-stage tooling system. - 1 set of dowel drills: 5 HM dowel drill bits, Ø 8x77 mm, right-hand - 4 HM dowel drill bits, Ø 8x77 mm, left-hand Basic machine Dowel Hole Boring Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW complete in standard configuration including: - Fully automatic electronic control with pulse operation via foot pedal for clamping-drilling-unclamping, and electric skip function. - Automatic return of the drilling unit after reaching the set drilling depth. - Automatic extension of the borehole depth for end-face drilling, eliminating the need to adjust the drilling depth from wide-face to end-face (+10 mm, e.g. with dowel length 35 mm, wide-face drilling depth 14 mm, end-face drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm), including 21 quick-change chucks (Ganner system) for easy drill bit changes. - Simple pivoting of the drilling unit from 0° to 90°, assisted by gas cylinder. - 1 clamping rail adjustable on the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. - Ideal positioning system consisting of: - 1 stop ruler 1800 mm for drilling shelves/intermediate panels (aluminium profile 40x40 mm) with 3 drop-in stops, - quick-change system, easily switched from right to left stop side for mirror-image shelf drilling in carcass construction; also suitable for line boring in System 32. - Side stops and position adjustments, as well as drilling height adjustment via mechanical digital counters on the support table. - Side stops can be easily pivoted away for ultra-fast changeover from carcass to frame and line boring. - Clamping arms for clamping rail suited for line boring positions up to max. 300 mm. - Ideal three-stage tooling system. Extraction funnel, dust-teste

Stanje: novo, Leto izdelave: 2024, Panhans Mortising Machine Type: 116/10 Codpfx Asr Eli Tohxegt - Maximum drilling depth: 145 mm - Maximum drilling length: 240 mm - Height adjustment: 135 mm - Extraction nozzle diameter: 100 mm - Colour: RAL 7035 Light Grey, RAL 5000 Violet Blue - Net weight: approx. 200 kg Robust German engineering Professional long-hole mortising and precise dowel drilling Stationary table, smooth-running, mobile drilling motor Mobility unit for increased versatility Cast table 700 x 380 mm, thick-walled and heavily ribbed Smooth-running cross slide with adjustable ball guides for lateral and depth adjustment Height adjustment via handwheel and scale, drilling depth stop via scale, drilling length limitation via left and right adjustable side stops Drill motor output 1.3 kW / 1.8 HP with motor brake and practical tool tray Including emergency stop button High-precision three-jaw drill chuck, clamping range 5 – 20 mm Dowel drilling unit for row drilling with indexing roller 16, 22, 25, and 32 mm; high-precision machined indexing, fixing via spring-loaded indexing pin Plug-in frame stop with indexing pin for positions: centre, left, right CE-compliant GS-tested Including additional special accessories: - Single-lever operation - Handwheel with dial gauge Location: ex stock 54634 Bitburg - Immediately available -

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, rabljeno, dobro ohranjeno, malo uporabljeno, vrhunska oprema Blagovna znamka Panhans Tip 116H Leto izdelave 1995 Št. stroja 640 GS – preskušeno na lesni prah 2-ročica za upravljanje Vpenjalna glava 20 mm Naprava za vrtanje moznike s 4 nastavki Kotna ograja 45°, kontinuirano nastavljiva Premično Dva pnevmatska vpenjalca obdelovanca Pnevmatska nastavitev višine s stopalko Priključek za odsesavanje D 100 mm Prostorska zahteva približno 950 mm x 1000 mm x 1300 mm Teža približno 200 kg Cjdpfx Aoxgu Uajhxjgt Lokacija skladišča: 54634 Bitburg, prosto naloženo, nepakirano Predaja v stanju, kot je bilo ogledano Brez garancije in jamstva

Stanje: zelo dobro (rabljeno), - Heidenhain digital readout - Accessories available Travel distances: X-axis travel: 280 mm Y-axis travel: 210 mm Cross table: KS 255 D Spindle speeds: 135 – 4,500 rpm Codpfx Ahsv E D Ttjxegt

Stanje: novo, Leto izdelave: 2023, New machine Year of manufacture: 2023 Features and technical specifications: - Robust German engineering - Professional mortising and precise dowel drilling, featuring a fixed table and smoothly operating mobile drilling motor - Mobility kit for increased portability - Heavy-duty cast iron table, 700 x 380 mm, thick-walled and strongly ribbed - 2 hand-operated eccentric clamps with solid steel columns for secure workpiece clamping - Smooth-running cross slide with adjustable ball guides for lateral and depth adjustment - 2-lever operation - Height adjustment via handwheel and scale, drilling depth stop via scale, drilling length limiters adjustable left and right via side stops - Drill motor power 1.3/1.7 kW, pole-changeable, speed 1500/3000 rpm, with mechanical motor brake and practical tool tray - Includes emergency stop button - High-precision two-jaw drill chuck with safety sleeve, clamping range 1–20 mm - Dowel drilling device for line boring with indexing rollers (16, 22, 25, and 32 mm) – precisely milled indexing, locking via spring-loaded indexing pin - Plug-in frame stop with index pin for the following positions: center, left, right - Mitre stop, plug-in, with index pin for 45° and 22.5° - Workpiece stop up to 1,500 mm for series processing - CE-compliant, GS tested - Max. drilling depth: 145 mm - Max. drilling length: 240 mm - Height adjustment: 135 mm Cedpfow I Uzksx Ahxogt - Clamping range: 5–20 mm - Motor power: 1.3 / 1.7 kW - Voltage: 400 V / 50 Hz - Extraction port: 100 mm Ø - Colour: RAL 7035 light grey and RAL 5000 violet blue Special features: - Dial gauge integrated in the handwheel, indicating height adjustment with 0.1 mm accuracy instead of a scale - Single-lever operation with remote locking for longitudinal and transverse movement of the drill motor, including release and locking of the indexing pin on the dowel drilling unit – allows machining of narrow workpieces from the table side as well - Emergency stop button with key - Safety guard over the drill chuck with electric interlock List price in this configuration: €12,213 Shipping dimensions: 120 x 80 x 160 cm Weight: approx. 200 kg Availability: Short notice Location: Hochheim

Stanje: novo, Leto izdelave: 2024, TECHNICAL DATA - Max. drilling depth: 145 mm - Max. drilling length: 240 mm - Height adjustment: 135 mm - Extraction nozzle diameter: 100 mm - Speed: 1500 / 3000 rpm - Colour: RAL 7035 Light Grey, RAL 5000 Violet Blue - Net weight approx. 200 kg Solid German engineering Professional mortising and precise dowel drilling Fixed table with smooth-running, movable drilling motor Travel mechanism for improved mobility Cast iron table (700 x 380 mm), thick-walled and heavily ribbed Smooth-running cross-slide with adjustable ball guides for lateral and depth adjustment Height adjustment via handwheel and scale; drilling depth stop via scale; drilling length limiters (left and right) are adjustable with side stops Drilling motor power: 1.3 kW/1.8 HP or 1.7 kW/2.3 HP, pole-changeable, speed 1500/3000 rpm with motor brake and practical tool tray Including emergency stop button High-precision three-jaw drill chuck, clamping range 5 – 20 mm Dowel drilling device for line drilling with indexing roller (16, 22, 25, and 32 mm), highly precise machined indexing, locking via spring-loaded indexing pin Cgodpfofpa Rajx Ahxot Plug-in frame stop with indexing pins for positions: center, left, right Plug-in mitre stop with indexing pins for 45° and 22.5° Workpiece stop up to 1500 mm for series processing CE compliant GS tested

Stanje: rabljeno, Leto izdelave: 1993, Dowel hole drilling unit: Spacing 16, 22, 25, 32 Drilling depth: 145 mm Slot length: 240 mm Vertical adjustment range: 135 mm Motor power: 1.3 / 1.8 kW Speed: 1400 / 2800 rpm Hold-down: manual Cgjdpfx Ahjwhuu Esxot Extraction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 300 kg