Klasični stružnica

PADOVANI Labor LABOR 180 S

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Naprodaj: Popolnoma nove hladilne vitrine – odlične za poslovne prostore, trgovine z živili, slaščičarne, kavarne ali restavracije • Na voljo v izvedbi s strežbo ali za samopostrežno uporabo • Stanje: 100 % novo, nerabljeno • Nastavljiva kontrola temperature Iiedpfow S Tb Rsx Al Nea • Notranja LED osvetlitev • Kaljeno steklo z modernim dizajnom • Na voljo več velikosti in modelov Profesionalna kakovost – Hitra dostava Cena se razlikuje glede na model in velikost!

Stanje: rabljeno, Premer struženja nad posteljo / mm Ijdpfx Alsv Rgzwo Neia Premer struženja nad podporo / mm Dolžina struženja / mm Konvencionalni stružni stroj s Forkardt vpenjalom F200, kopirno napravo in veliko dodatne opreme Premer struženja nad prečnim suportom: 240 mm Premer vretena: 52 mm Premer struženja: 360 mm Višina konic: 180 mm Dolžina struženja: 1.000 mm Skupna dolžina: 2.200 mm Skupna širina: 750 mm Skupna višina: 1.400 mm Maks. hitrost vretena: 1.750 min⁻¹ Min. hitrost vretena: 60 min⁻¹ Skupna teža: 1.800 kg Vse tehnične informacije so nezavezujoče in brez garancije. Odstopanja so možna glede na letnik izdelave, izvedbo ali stanje stroja. Odgovornost za pravilnost in popolnost podatkov je izključena.

Leto izdelave: 1998, stanje: zelo dobro (rabljeno),

Stanje: novo, TC 205 x 1000 CVS Exhibition machine, color blue Technical Data: Swing over bed: 410 mm Centre height: 205 mm Swing over cross slide: 234 mm Iisdpfx Aevzmtzol Noa Swing in gap: 610 mm Bed width: 280 mm Between centers: 1000 mm Number of spindle speeds: 8 Speed range: 80 - 2000 rpm Spindle bore: 58 mm Spindle nose: D1-6 Camlock Spindle taper: MT 6 Tailstock quill travel: 130 mm Tailstock taper: MT 4 Max. tool size: 22 mm Cross slide travel: 225 mm Top slide travel: 130 mm Thread cutting imperial: 2 - 72 T.P.I Thread cutting metric: 0.2 - 14 mm Thread D.P.: 4 - 44 D.P. Thread module: 0.3 - 7 MOD Longitudinal feed: (24) 0.035 - 0.5 mm/rev metric (24) 0.0014 - 0.020 inch Cross feed: (24) 0.017 - 0.250 mm/rev metric (24) 0.0007 - 0.0100 inch Main motor power: 3.75 kW Coolant pump: 0.10 kW Weight, approx.: 1650 kg Equipment: - CSS for constant cutting speed - Flange - Fixed steady rest - Splashguard rear panel - 4-way tool post - Foot brake - Emergency stop switch - Coolant system - Chip tray - Fixed centre - Change gear set - Reducing bush for main spindle - Machine pads - Service tools - Operating manual

Stanje: potreben popravila (rabljeno), Turning length 1000 mm Swing diameter over bed 380 mm Isdpfsw U U Uqex Al Neia Swing diameter over cross slide 190 mm Spindle speed range 25 - 2000 rpm Number of spindle speeds 18 Spindle bore Ø 56.0 mm Tailstock quill taper MK DIN 228 / MK 4 Quill stroke 150 mm Bed width 310 mm Spindle mount DIN 55027 / 6 Longitudinal feeds 0.022 - 0.8 mm/rev Cross feeds 0.011 - 0.4 mm/rev Thread cutting metric 0.3 - 10.0 mm Operating voltage 380 V Total power requirement 7.5 kW Machine weight approx. 1600 kg Basic functions available Machine has various leaks Sold as is at a special price! Lathe with precision-ground and induction-hardened bed. Very well suited, e.g., for use in workshops and training centers. - Machine video - ?v=zCGu4i6V5dM Equipment: - robust lead-screw and feed-screw lathe - FORKARDT 3-jaw chuck Ø 200 mm, with chuck key - MULTIFIX tool post - size B - with 3 inserts - movable tailstock, including quick-action drill chuck - swarf guard rear panel - front emergency stop button - adjustable bed stop - coolant device including coolant tray - operating manual (PDF)

Stanje: zelo dobro (rabljeno), Odlično ohranjena vitrina za hlajenje, plin R 290. dimenzije zunanje 205x245x 85, notranja 150x240x65. Govorimo Nemško, Angleško in ex YU jezike. Kontakt možen tudi prek WatsApp Iisdpet Txnqefx Al Nsa

Stanje: zelo dobro (rabljeno), CTS Climate Chamber / Climate Test Cell We are offering a CTS climate chamber / climate test cell. Available from mid-January 2023! Water-cooled Height-adjustable! Footprint approx. (W x D x H): 3755 x 3470 x 2480 mm Test room approx. (W x D x H): 2500 x 2720 x 2200 mm Test chamber volume: approx. 15 m³ Temperature range: -40°C to +140°C Temperature deviation: 1 K over time Average temperature change rate (without heat radiation, measured at supply air): Heating: 2 K/min Cooling: 1 K/min (from +110°C to -35°C) Climate tests: Temperature range: +10°C to +90°C Humidity range: +30% to +95% RH In dew point range: +5°C to 89°C Temperature deviation: 0.5 K over time Humidity deviation: ±1–±3% RH over time Rated voltage: 400V 3/N, PE, 50 Hz Nominal power: 53.5 kW Rated current: 92.3 A Iiedpjip Dp Ssfx Al Nja Compressor: S6J-16.2 Includes chiller Refrigerant: R404A Weight: 5,500 kg Type: CW-40/16 Condition: used Scope of delivery: (see image) (Technical data and specifications are subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Kovinske police za prodajne prostore ✔ Gondole in zaključni elementi gondol ✔ Stenske police 🔹 Izdelano v Evropi – vrhunska kvaliteta 🔹 Različni modeli, velikosti in barve na voljo 🔹 Svetovanje in 3D izris prostora po želji 🔹 Prevoz in montaža zagotovljena Ijdpow S Ildefx Al Noia CENA JE ODVISNA OD IZBRANEGA MODELA Prilagodljive cene, izračunane na posamezen element (višina, globina, število polic). 📞 Kontaktirajte nas za osebno ponudbo in brezplačno svetovanje!

Stanje: zelo dobro (rabljeno), Leto izdelave: 1984, Hauteur de pointe : 180 mm Distance entre pointes : 1000 mm Diamètre de rotation sur le banc : 350 mm Diamètre de rotation sur le chariot transversal : 200 mm Largeur du banc : 255 mm Alésage de broche : 36,5 mm Nez de broche DIN 55027 : Taille 5 Plage de vitesses, 14 paliers : 28 – 2500 tr/min Avances, 9 longitudinale : 0,04 – 0,4 mm/tr Iisdpfxjyud Its Al Nea Avances, 9 transversale : 0,02 – 0,2 mm/tr 38 Filetages métriques : 0,2 – 18 mm 35 Filetages Whitworth : 76 – 2" 31 Filetages module : 0,4 – 13,5 module 25 Filetages diametral pitch : 36 – 2,6 pitch Cône de la contre-pointe : CM 4 Puissance du moteur : 3 kW Dimensions de la machine (L x l x H) : 2350 x 850 x 1800 mm Poids : 1300 kg Accessoires / Caractéristiques particulières : • Affichage digital 2 axes EASSON ES-8A • Mandrin 3 mors • Porte-outils à changement rapide “Multifix” taille B • Protection du mandrin, rabattable, avec sécurité électrique • Installation de liquide de refroidissement Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Allemagne

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, Precision Lathe RML 1640V – Comprehensive Equipment Description: This machine is ideally suited for toolmaking, training workshops, maintenance, as well as for precise single-part and small-batch production. Equipment: - 3-axis digital readout - 3-jaw chuck with internal and external jaws - Coolant system - Removable gap bridge - Hardened and ground bed guideways - Fixed steady rest - Live center - Multifix quick-change tool post - Slip clutch for feed overload protection - Foot brake - Machine lamp - Bed stop with micrometer adjustment - Toolmaker's precision according to DIN 8605 - Two-tone paintwork: Blue (RAL 5012) / Grey (RAL 7032) - CE conformity - German operating manual and spare parts list Technical Data: Swing over bed: 410 mm Swing over cross slide: 264 mm Swing in gap: 533 mm Distance between centers: 1000 mm Bed width: 260 mm Spindle bore: 52.5 mm Spindle mount: D1-6 DIN 55029 Cross slide travel: 220 mm Spindle speeds: 20 – 2500 rpm Number of speed ranges: 2 Speed range 1: 20 – 400 rpm Speed range 2: 400 – 2500 rpm Motor power: 3.7 kW Tailstock quill diameter: 52 mm Tailstock quill travel: 152 mm Quill taper: MK 4 Machine weight: 1400 kg Thread cutting ranges: Iijdpfx Aloyudwbo Nja Metric: (39) 0.2 – 14 mm Whitworth: (45) 2 – 72 TPI Diametral Pitch: (21) 8 – 44 DP Module: (18) 0.3 – 3.5 MOD Miscellaneous: Inspection by appointment possible. The machine is immediately ready for operation.