Brusilnik s širokim pasom

Ott RSO-1300

Stanje: novo, Leto izdelave: 2023, stiskalna sila: 120 t, skupna dolžina: 3.000 mm, skupna širina: 1.300 mm, obratovalna temperatura: 120 °C, premer cilindra: 85 mm, širina odpiranja: 400 mm,

Stanje: rabljeno, Leto izdelave: 2023, DOUBLE GLAZING BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLAZING BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double mitre saw for simultaneous cutting of two glazing beads positioned one above the other. The right sawing unit is fixed; the left unit can be adjusted to the required cutting length, which can be read off a digital display. Both units feature supports enabling simultaneous cutting of two glazing beads. For processing larger cross-sections, the upper support can be removed. Upon completion of the cutting cycle, the pneumatic clamping cylinders automatically swing to the side, simplifying loading and unloading. STANDARD EQUIPMENT: • Fixed right-hand unit • Digital measuring display • Pressure monitor • 2 carbide-tipped saw blades • Electrical system with motor brake, undervoltage release, and motor protection switch • Pressure monitor • Tool kit • Safety guards with horizontal, pivotable clamping devices • Two-hand operation • Belt drive • Pneumatically raised sawing unit • Central support TECHNICAL SPECIFICATIONS: • Motor power: 2 x 1.2 kW Csdpfx Ahexnlgcoxsgt • Saw blade diameter: Ø 220 mm • Max. cutting height without support: 80 mm • Max. cutting width at 90 degrees: 55 mm • Max. cutting width at 45 degrees: 40 mm • Max. cutting length: 2800 mm (optional 4000 mm) • Min. cutting length: 158 mm • Weight: 217 kg • Footprint (standard configuration): 3000 x 850 mm Extended cutting capacity: 1 pc Maximum cutting length: 4000 mm Star stop with 4 positions: 1 set of 2 mechanical stops for setting up to 4 intermediate angles Additional central support: 1 pc Adaptations for rebated profiles: 1 pc Adaptations for rebated profiles as per drawing: - Attachment on the clamping devices to compensate for profile inclination - Spacers on the rear stops of the units and the central support In the sketch below (shown in green), an angled presser is depicted, following the inclined profile and pressing it against the (shown in red) spacer on the stop. Location: Garbsen

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, Wide Belt Sander OTT ALPHA 110 Cgjdpegi Dryefx Ahxst - Machine in stock - After technical inspection - Very good condition - Made in Germany - Year of manufacture: 1996 - Segmented shoe – ideal solution for lacquer / veneer work TECHNICAL SPECIFICATIONS: - Working width: 1100 mm - Working height: 1–150 mm - Combi unit with membrane shoe, task-controlled - Main unit motor power: 11 kW - Belt air jet cleaning - Pneumatic belt oscillation - Two belt speeds: 4.5 and 18 m/s - Unit with felt drum - Drum motor power: 0.75 kW - Drum oscillation - Cleaning brush unit - Brush motor power: 0.75 kW - Feed speed steplessly adjustable - Feed speed range: 4–18 m/min - Feed motor power: 1.5 kW - Electric height adjustment - Vacuum table - Fan motor power: 3 kW - Extraction port diameters: 4 x 120 mm, 1 x 150 mm Transport dimensions: - Length: 200 cm - Width: 245 cm - Height: 210 cm - Weight: 2,500 kg 1. The Alpha Combi unit is a sanding module with a 150 mm diameter contact roller (hardness 90 Shore) integrated with a sectional pneumatic shoe with section width 27 mm. 2. EMS 27 optical system – detects minimal surface irregularities and adjusts the pressure of individual shoe sections at specific locations on the workpiece. 3. Control of adjacent shoe sections is possible within a range of -2 to +4.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Nice machine in good condition due to coming from a small business, with low operating hours. Comes with IV 68 tool. Cedpfx Ahsu S Afcsxogt Still set up and ready for demonstration on site.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Obnovljen šestbatni hidravlični ravnalni stiskalec italijanske izdelave. Znamčni etažni stiskalec za enostavno furniranje lesa z garancijo in servisom. Dimenzije furnirnih plošč: 3000 x 1300 mm Pritisk na celotni površini: 2,2 kg/cm2 Skupni maksimalni pritisk: 80 ton Število hidravličnih batov: 6 Teflonska folija MYLAR na ploščah Priprava za ogrevanje plošč z vodo Možnost namestitve toplovodnega kotla Cena vključuje popolno obnovo stroja Cena: 10.000,- EUR brez DDV Stroj bo obnovljen, nastavljen in preizkušen. Stanje obnove in pripravljenost stroja za prevzem je treba vnaprej preveriti! Na zalogi v Telnice pri Brnu, Češka republika Cjdpfx Ajvvbbcshxegt Seveda je omogočeno preizkušanje, predstavitev stroja in usposabljanje operaterja.

Stanje: rabljeno, Kompletna linija za žaganje IDC000103 1. SKUPINA ŽAG Csdpfx Aeu E Hu Djhxjgt Soderhamn Eriksson 240-12 ARI Vislanda KS12.2 2. SKUPINA ŽAG Soderhamn Eriksson 240-12 Ari Vislanda DS74+1 3. ARI Vislanda KT5A-230 Hitrost do 60 m/min.

Stanje: rabljeno, Leitz HM - IV 66 window set with mullion and front door fitting Sold as-is; the tooling has not been resharpened, Cgodehzgy Nepfx Ahxet located in Seevetal, transport not included, subject to prior sale.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, delovna širina: 3.000 mm, VROČA STISKALNICA MANNI - Dimenzije mize: 3000x1300 mm - Št. 6 cilindrov Csdpox Rqtisfx Ahxjgt - Popolna z grelnikom za toplo vodo na lesne odpadke

Stanje: rabljeno, Leto izdelave: 1984, Used machine Year of manufacture: 1984 Condition: fully inspected and serviced Features and technical data: - Including combination unit with contact roller and sanding pad - With height-adjustable contact roller for calibration - With air cushion pressure shoe controlled by the workpiece - 4-way adjustable grit compensation - With pneumatic belt tensioning device - With rotating structuring brush at the outfeed side of the machine - Working width: 1350 mm - Sanding belt length: 1900 mm - Pass-through height: 150 mm - Main motor: 15 kW - Variable feed speed, infinitely adjustable from 2.5 to 12.5 m/min - With roller table at infeed Codpfjw R Hh Ujx Ahxegt - With separate additional structuring brush - With roller table at outfeed - With digital display unit for the electromotor-driven workpiece thickness adjustment - With automatic workpiece thickness adjustment - Extraction nozzles: 2 x 200 mm - Feed belt is generally OK, but has a defect in one spot (see photo) Dimensions: approx. 2300 x 2000 x 2300 mm Weight approx.: 2500 kg Pictures show the machine in uninspected condition! Availability: short notice Location: Röllbach

Stanje: rabljeno, Leto izdelave: 1983, Used machine Year of manufacture: 1983 Condition: fully inspected and serviced, including new feed belt Cgjdpfjwka T Sjx Ahxet Features and Technical Data: - Includes combination unit with contact roller and sanding pad - With height-adjustable contact roller for calibration - With workpiece-controlled air cushion pressure pad - 4-way adjustable grit compensation - With pneumatic belt tensioning device - With a rotating cleaning brush at the machine outlet - Belt oscillation via photoelectric sensor for automatic monitoring and regulation of lateral belt tracking for uniform belt wear - With roller table at the infeed - With digital display of the motorized workpiece thickness adjustment - With additional veneer sanding bar - With 2x replacement sanding pads - Sanding width: 1350 mm - Sanding belt length: 1900 mm - Pass-through height: 150 mm - Main motor: 15 kW - Feed speed steplessly adjustable 2.5 – 12.5 m/min - Extraction nozzles: 2 x 200 mm Dimensions: approx. 2300 x 2000 x 2300 mm Weight: approx. 2300 kg Photos show the machine in non-refurbished condition! Availability: approx. end of January 2026 Location: Röllbach