OTT Pacific V6-F

OTT Pacific V6-F

Stanje: rabljeno, Leto izdelave: 2018, Edgebanding Machine AKV 3006 DK - F with Jointing Milling Unit including DIA Tools Jointing thickness up to 40 mm, workpiece thickness up to 3 mm, combi-milling station for radius R 2.5 mm. Technical Description: - Hotmelt adhesive application to workpiece for edge materials up to 3 mm - Maximum workpiece thickness 60 mm without jointing unit, 40 mm with jointing unit - Maintenance-free, coated glue pot - HF end trimming station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with replaceable cutter heads (combi version) and fine adjustment accessible from operator side - Spare slots for additional processing units (Hebrock system) - Feed speed approx. 10 m/min - Cutting depth adjustment for trimming saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically arranged operator panel - Double roller upper pressure beam - Aggregate viewing window from both rear and operator side of the machine - PLC control including touchscreen Technical Data: - Feed speed: 10 m/min - Panel thickness: 8 - 40 mm - Weight: approx. 1550 kg (depending on configuration) - Dimensions (L x W x H): 5250 x 1445 x 1600 mm Fpsdpfxox S Hmzj Ahmjh Special Equipment: Airtronic incl. cooling and antistatic spray unit (2014) 1 pc. hot air unit for achieving optical zero joint with special edging materials - Including pneumatic glue pot positioning - Including cooling and antistatic spray unit - Including 2 additional quick-change edge channels - Including special corner rounding milling unit (max. workpiece thickness: 60 mm, min. length: 200 mm) - Exclusively for Hebrock edgebanders of the 3000 series - Retrofitting possible (extra cost on request) Technical Data: - Max. panel thickness: 40 mm - Max. edge thickness: 1.2 – 2.0 mm - Feed speed: 7 – 10 m/min - Air consumption: approx. 280 – 580 l/min (Airtronic only), electronically controlled - Ready for operation after approx. 2 min Upgrade for 8 mm edge thickness 1 pc. for max. 40 mm workpiece thickness Including pneumatic saw adjustment (special design) Minimum workpiece thickness: 8 mm 3-point pneumatic milling cutter adjustment Switching radius – chamfer – flush for combi milling stations, eliminating manual adjustment at the combi milling station for the 3rd reference point. PLC control mandatory. Buffing station (polishing) 1 pc. corner rounding milling unit incl. combi tool and pneumatic adjustment for chamfer/radius (max. workpiece thickness 40 mm, min. length 300 mm, radius R 2.0 mm) Radius scraper 1 pc. incl. pneumatic lifting device (radius R 2.0 mm) Flat scraper 1 pc. with pneumatic activation Full chassis 1 pc. Glue station change system incl. glue drain device prepared for discharge below (1 pc), without second glue pot; includes possibility to work with PU adhesive Grooving saw unit vertical into panel 1 pc. incl. pneumatic lifting device - Groove width: 8.2 mm - Groove depth: 8.0 mm - Distance from panel edge: 14.0 mm Special grooving saw motor with higher power 1 pc. Extraction for jointing unit, internal, on the extraction manifold of the machine Ball bearing for corner rounding cutter 24.1mm 1 pc Ball bearing for corner rounding cutter 24.2mm 1 pc Protective agent spray system 1 pc. for edge surface – for sensitive edge materials Combined spray system for panels: separating and cleaning agent spray (1 pc) Storage location: Supplier

Stanje: rabljeno, Formatna krožna žaga ALTENDORF F45 - rabljena - Dvojni drsni voziček, predrezalna enota, paralelni prislon s fino nastavitvijo, podaljšana miza, hidravlično nastavljanje višine, hidravlično nagibanje, digitalni prikaz kota nagiba, Fpsdpew Nx A Iefx Ahmoh indikator hitrosti, podaljšek mize iz eloksiranega aluminija, razširitev mize iz eloksiranega aluminija, kotni prislon, ozká in široka zgornja zaščitna kapa, avtomatska zavora, pregledano na prah ----- Tehnični podatki ----- Nagib: 45°, Dolžina vozička: 3.200 mm, Širina reza: 1.300 mm, Višina reza: 125 mm, Maks. Ø žaginega lista: 400 mm, Hitrosti: 3.000/4.000/5.000/6.000 obr/min, Moč motorja: 5,5 kW, Teža: 1040 kg

Stanje: novo, Leto izdelave: 2024, Table length 2000 mm Table width 1000 mm Lifting height 400 - 1010 mm Load capacity 300 kg Fpodpfov Htkdex Ahmjh Machine weight approx. 220 kg Description: - Sturdy support frame for worktops - Easy, back-friendly operation thanks to height adjustment via foot pedal - Optimum maneuverability with 4 swivel castors – 2 with locking brakes - Beech multiplex board 2,000 x 1,000 x 30 mm - 5-year warranty

Stanje: rabljeno, Leto izdelave: 2005, Number of belts: 2-belt Fpsdpfxsytrf Ro Ahmsh Max. pass-through height: 150 mm Max. working width: 1350 mm 1st unit: combined sanding unit Design of 1st unit: steel contact roller Pad 1st unit: segmented electronic pad, 35 mm Abrasive belt length 1st unit: 1900 mm Abrasive belt width 1st unit: 1370 mm Abrasive belt speed 1st unit: 18 m/sec 2nd unit: combined sanding unit Design of 2nd unit: rubber-coated contact roller, 65° Shore Pad 2nd unit: segmented electronic pad, 35 mm Abrasive belt length 2nd unit: 1900 mm Abrasive belt width 2nd unit: 1370 mm Abrasive belt speed 2nd unit: variable, 2 - 18 m/sec Belt air-blast device: for 2nd unit Cleaning brushes: yes Suitable for lacquer sanding: yes Vacuum conveyor belt: yes Feed speed: infinitely variable from 2.5 - 13 m/min Control: touch screen Electro-pneumatic belt oscillation: yes Infeed height: fixed (upper section adjustable) Table height display: digital Working/table height: 900 mm Motor power: 36 kW Location: supplier

Stanje: pripravljen za uporabo (rabljen), There are 2 compressors available. 1) CSC ab 300-670, year of manufacture: 1997. 2) Atlas Copco GX5FF EP, year of manufacture: 2019. Motor power: 5.5 kW, max. operating pressure: 10 bar, FAD capacity: 13 l/s, 46.8 m³/hr, 27.5 cfm, sound level: 65 dB(A), standard air receiver size: 200 l. Dimensions (L/W/H): approx. 1430 mm / 665 mm / 1260 mm, weight: 210 kg. Documentation available. Fpjdpfx Ahjtnf Iusmoh

Stanje: rabljeno, Leto izdelave: 2008, Used machine Year of manufacture: 2008 Features and technical data: - Round pot glue unit - with second glue unit for PUR processing - Feed unit with automatic edge band magazine - Pressure zone with multiple pressure rollers - End trimming: two motorized saw units for front/end cap trimming - Top/bottom milling: two milling units with copying wheels for radius or chamfer work Fsdpoyqanbsfx Ahmsph - Radius scraper: pneumatically controlled, for reworking radii - Surface scraper: for smoothing the edge surfaces - Polishing unit: two buffing wheels with motors for final finishing - Riepe spraying device - Control: PLC with operator panel - Replacement of the feed frequency inverter by Ott in 2022 - Feed speed approx. 10–12 m/min - Workpiece thickness up to 52 mm - Edge thickness 0.3–12 mm - Power supply 3x 400 V AC, 50 Hz - Nominal power 12.7 kW - Rated current 30.5 A - Control voltage 24 V DC - Max. fuse protection 35 A (5x 6 mm² power cable) Machine dimensions: approx. 6120x840x1385 mm Machine weight: approx. 3,000 kg Availability: short term Location: Röllbach

Stanje: rabljeno, Leto izdelave: 2003, Rabljeni stroj Leto izdelave: 2003 Oprema in tehnični podatki: - Krmiljenje MAGELIS - Za vroče lepilo na osnovi EVA - Lepljenje: 2x1,5 kW, u=12000, 200 Hz - Prirezovanje: 2x0,2 kW, avtomatski zasuk 0°/3°, 2 HM žagini listi 140 mm - Poravnalno rezkanje: 2,07 kW, z WPL glavami HF 70, premer 70 mm Fedpexymfwjfx Ahmeph - Rezkanje radija: R2 - Radijska strgala - Površinska strgala - Zgornji lepilni bazen - Mere obdelovanca: - Minimalna širina: 70 mm - Debelina: 8-42 mm - Minimalna dolžina: 150 mm - Debelina roba: 0,2-6 mm - Podajalna hitrost: 12 m/min - Priključek za odsesavanje: 160 mm Dimenzije: 4.500 x 1.250 x 1.300 mm Teža: 1.650 kg Razpoložljivost: takoj Skladiščna lokacija: Baden-Württemberg

Stanje: novo, Pre-scoring unit, kW Dimensions (Length/Width/Height), mm Approx. machine weight, kg Masterwood MasterSaw Heavy-duty pressure beam saw with full equipment ----- Manufacturer description: ----- The MasterSaw pressure beam saws offer the following features: - Air-jet marked cutting line - Height-controlled pressure beam - Adjustable saw blade protrusion - 3 or 4 air cushion tables, center tables adjustable - Infeed and outfeed rollers at the end of the tables - 15 kW main saw motor (MS 430 L: 18.5 kW) - Scoring unit adjustable horizontally and vertically from the control panel - Masterlock quick-change system for saw blade replacement - Saw carriage return travel speed 110 m/min, feed up to max. 95 m/min - Gripper carriage return speed up to 95 m/min - Machine weight 6 t or 6.8 t - 8 or 10 twin-finger clamps as standard - Double roller side alignment - Intuitive machine software with graphical user interface - Tension-free cutting - Recut/nesting option - Front and rear cleaning flaps ----- Features of the MasterSaw series: MasterSaw 320 – Outstanding in price and performance ----- - Cutting length 3,200 mm - 3 air cushion tables, center table adjustable - Machine weight 6 t MasterSaw 430 – Industrial standard for the trade ----- - Cutting length 4,300 mm - 4 air cushion tables, center tables adjustable - Machine weight 6.8 t Detailed features MasterSaw 320/430: ----- - Saw unit with automatic adjustment of optimum saw blade protrusion - Scoring saw unit with 200 mm saw blade for splinter-free cuts at high feed rates - Saw unit drive via servomotor and rack and pinion - Pneumatic pressure beam is always positioned parallel to the worktable via rack and pinion - The opening height of the pressure beam is monitored by the intelligent control system to ensure the shortest cutting cycles - Double roller side aligner positions workpieces before and after the cutting line - Material pusher with 8 (MS 320) or 10 (MS 430) twin-finger clamps Technical specifications MasterSaw 320/430: ----- - Max. panel size MS 320: 3,200 x 3,100 mm - Max. panel size MS 430: 4,300 x 4,300 mm - Saw blade diameter: 400 mm - Cutting thickness up to 90 mm - Saw motor power: 15 kW - Scoring saw motor power: 1.5 kW - Feed speeds: up to 95 m/min in sawing mode – up to 110 m/min in return - Smallest finished workpiece: 34 x 45 mm - Weight: 6 t (MS 320) or 6.8 t (MS 430) - Dimensions MS 320: 5,556 x 6,646 x 1,890 mm (L x W x H) - Dimensions MS 430: 6,556 x 7,775 x 1,890 mm (L x W x H) - CE protective equipment Fjdpfjxmk Ebjx Ahmsph ----- Features of the MasterSaw series: MasterSaw 430 L – Lift table machine with 120 mm cutting height ----- The solution for high productivity The MasterSaw 430 L is equipped with rear-side lift table loading. Thanks to its 120 mm cutting height, it is also ideal for series production. Equipment and technical data MasterSa...

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: Werksüberarbeitungsnummer: WÜA1363DK-F7560, Rabljeni stroj GM020.0068 AKV 3003 DK - F Fpodpfjw Nih Iex Ahmoh Leto izdelave: 2007 Izvedba: 3 mm 1. rezkalna postaja: Kombinirana Površinski vlečni strgalnik z izkopom Podvozje Pnevmatska nastavitev rezkanja Ročica končnega stikala, naklon 7,5°

Stanje: rabljeno, Leto izdelave: 2006, Nazivni volumenski pretok: 4400 m³/h, sesalni nastavek: 250 mm, moč motorja: 5,5 kW, nazivno število vrtljajev: 2880 vrt/min. Teža: 730 kg. Lokacija skladišča: Nattheim. Fpsdpfx Ahoyw Tw Demeh