Razpršilnik lepila

OSAMA walce klejowe 1000mm

Stanje: novo, Leto izdelave: 2026, Engine power 5 HP Blade diameter 250 mm Blade speed (rpm) 5300 Automatic pneumatic movable table Galvanized iron and polyethylene supports √ Maximum horizontal cutting length 4200 mm Maximum vertical cutting height 2200 mm Hfsdpfx Afeu Rqq Hewof Maximum horizontal cutting height 2080 mm Maximum cutting depth 60 mm

Stanje: novo, Technical data: Working width: 1100 mm Abrasive belt size: 1120 x 2150 mm Max working height: 160 mm Calibrating steel roller diameter: 150 mm Hfodpfx Afogtm U Aewsf Rubber roller diameter: 150 mm Sanding shoe width: 50 mm Total motor power for both sanding units: 11 kW Abrasive belt speed: 16/18 m/s Feed motor power: 0.55 kW Infinitely variable feed belt speed: 4–20 m/min Work table motor power: 0.25 kW Pneumatic shoe lift/drop: YES

Stanje: novo, Leto izdelave: 2026, Technical data: • Extraction capacity approx. 5,200 m³/h • Motor power 3.0 kW • Speed 3,000 rpm • Voltage 400 V, 50 Hz • Extraction port 250/200 mm • Filter surface area 13.7 m² • Air velocity 28 m/sec • Number of filters: 28 • Dimensions: 752 x 1,982 x 2,144 mm Hfodpfx Afsd H Rf Tjwof • Weight: 300 kg • Filter category: G • Filter material: polyester • Noise level: 80 dB without connection, 65 dB when connected to the machine via ductwork Scope of delivery: • Complies with H-2 standard • Polyester filter, 5 microns • 2 containers • Mobile undercarriage • Filter cleaning with a vibration system and control unit + €850 for models equipped with a fire extinguisher (Safe System)

Stanje: zelo dobro (rabljeno), Four-side planer Weinig Maximum planing width: 230 mm Maximum planing height: 120 mm 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Hjdsrigxyepfx Afwjff Feed motor - 4 kW Fully adjustable heads Electrically adjustable height and width of planing Spindles: 40 mm Feed on cardan shafts, with stepless adjustment Solid planer from WEINIG Total machine length: 415 cm Machine tested, in original condition

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, CASADEI F 25 LL FK – Spindle Moulder with Tilting Spindle and Table Extensions Hodpfx Afedqzcxewsff Spindle moulder with tilting spindle from -45° to +45° Robust steel and cast iron construction Dynamically balanced spindle moulder unit anchored to the worktable Especially sturdy design Smooth operation thanks to precision aggregates and high net weight Standard with forward/reverse spindle rotation and electronic interlock during direction change 5 speeds from 3000 - 10000 rpm Speed change is simple and convenient from the machine side Standard with MK 4 interchangeable spindle system Large cast iron worktable for permanent precision Easy handling due to controls and speed display on the front panel Fence with fine adjustment and aluminium fence jaws as standard Powerful industrial motors Equipment features: Spindle moulder fence Fence with crank/handwheel adjustment from the front With numeric display Interchangeable spindle MK 4 interchangeable spindle as standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenoning operations and slotting Scope of delivery: Manually tiltable spindle from +45° to -45° Speed display via LED on the front Aluminium fence jaws Curved guard for moulding operations Spindle rotation with forward/reverse switch MK 4 interchangeable spindle Fence with crank/handwheel adjustment from the front with numeric display Table extension left and right (2500 mm length) Extendable workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article No.: 5220728 Technical data: Worktable dimensions: 2500 x 810 mm Spindle tilt range: +45 to -45 degrees Usable spindle length for Ø 30-35 mm: 140 mm Usable spindle length for Ø 40-50 mm: 180 mm Spindle stroke: 90 mm Max. tool Ø profiling: 250 mm Max. tenoning tool Ø: 350 mm Max. shaper tool Ø: 160 mm Max. lowerable tool Ø: 320 x 60 mm Speeds, 5-step: 3000/4500/6000/8000/10000 rpm Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction port Ø at fence: 1 x 120 mm Extraction port Ø under table: 2 x 80 mm Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Glazing Bead Stapling Machine "2 P Jumbo Automatic E.C." - New - Hfedpfjvnh T Nox Afwef Your Benefits: - Corner joints are closed - No open glazing bead joints - No color differences when painting - Glazing bead frames are easy to assign Staple Corner Jointing Machine 2P Jumbo Automatic E.C. for stapling glazing bead frames. Selectable between automatic and manual operation; With angle stop, clamping device from above and front Pressure is individually adjustable. Insertion of parallel and overlapping staples possible via electronic control programming. Stapler can be mounted on a suitable work table, operation via foot pedal. ----- Price for this configuration on request! Plus statutory VAT as well as packaging/shipping ----- Images show the Staple Corner Jointing Machine 2P with the optional mobile worktable (see details under additional charges) Additional charges: ----- Mobile worktable Height adjustable from 700 - 1000 mm, 2 detachable support rails, 1000 mm long, 2 pivoting and sliding support rails 1000 mm, support rails covered with felt, 4 swivel castors, 2 of which with brakes. ----- Surcharge: 1,321.00 Euro net Staples: packages 15 mm staples (package of 2,000 pcs): Price 22.00 Euro 12 mm staples (package of 3,000 pcs): Price 32.00 Euro 10 mm staples (package of 3,000 pcs): Price 32.00 Euro Dimensions and Weights ----- Jumbo Automatic E.C. 470 x 370 x 300 mm, 35 kg Work table 32 kg All prices net. Plus statutory VAT. Ex works plus packaging and shipping (Technical data according to manufacturer – no guarantee!)

Stanje: novo, Leto izdelave: 2026, Crosscut and Mitre Saw Type: ZS 200 N – 5 kW Motor with machine stand, but without saw blade The machine can be tilted via a handwheel and worm gear (rear) Saw blade diameter: 520 mm, saw blade bore: 50 mm Saw blade speed: 2,800 rpm 400 volt / 5 kW (S6/40%) motor with brake and automatic star-delta starter Cutting width at 90°: 420 mm Cutting width at 45° (swivelled): 295 mm Cutting height at 90°: 200 mm Hedpfxei Dfids Afwsff Cutting height at 45° (tilted): 140 mm The saw can be swivelled to one side up to approx. 25 degrees for acute angles and tilted to the left up to 30 degrees Machine weight: approx. 250 kg Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2026, A550 Vollautomatische Massivholzsäge 9 m Vollautomatisches Schneiden von mittelgroßem bis großem Vollholz mit benutzerfreundlicher Automatisierung. Legen Sie irgendein Holzstück ab und die Maschine erkennt es automatisch und schneidet es mit hochpräziser Servomotor-Materialpositionierung entsprechend den eingegebenen Zuschnittsaufträgen. Import von Excel-Auftragslisten über WLAN für effiziente Übernahme großer Schneidlisten. Ihre vollautomatische Säge kann optional als Inline-Optimierungssäge geliefert werden. Jedes aufgelegte Holzstück, ungeachtet der Länge, wird von einem Lasersensor vermessen. Unser leistungsfähiger Optimierungsalgorithmus verarbeitet Ihre Zuschnittliste und kalkuliert den optimalen Abschnittsplan, sodass der Verschnitt minimiert wird. Dieser Vorgang erfolgt in Echtzeit während des Maschinenbetriebs, ohne dass ein Eingriff Ihrerseits erforderlich ist. Ausstattung: • Vollautomatischer Schneidbetrieb mit Stangen-/Riegelzuführung und Längenzuschnitt • Einfache Benutzeroberfläche für den vollautomatischen Betrieb, Auftrag eingeben und in Sekunden schneiden • Komfortables Schneiden von Einzelteilen, Serien oder umfangreichen Excel-Listen • Bündel-/Mehrfachstangen-Schnitt und automatische Zählfunktion • Remote-Eingabe von Excel-Auftragslisten per WLAN mit umfassenden Datenzuordnungsmöglichkeiten Hfjdpjf Ekngefx Afwsf • Vollständig einstellbare Schnitt- und Vorschubgeschwindigkeiten für maximale Produktivität • Automatischer Etikettendruck für Teile basierend auf den Auftragsdaten (manuelle Etikettenanbringung, optional) • Direktdruck auf das Material während des Durchlaufs ohne Bedienereingriff (optional) • Barcode- oder QR-Code-Druck/-Scan für Auftragsdatenerfassung (optional) • Automatisierte Servo-Einstellung des Sägegehrungswinkels bis ±75° (optional) Ideal geeignet für: • Rahmen- und Fachwerkproduktion • Fertigung von Gartenhäusern/Holzhütten • Möbelherstellung • Gehrungs-Holzkonstruktionen • Serienmäßiger Zuschnitt großer Holzvolumina Modell: A550 Schnittlänge: 9 m Materiallänge: 8.580 mm Schubkraft: 20–40 kg Software: Optimierer HOCHWERTIGE, IN AUSTRALIEN HERGESTELLTE MASCHINEN.

Stanje: rabljeno, Leto izdelave: 1999, Carriage Length: 3800 mm Cutting Width at Rip Fence: 1500 mm Cutting Width at Crosscut Fence: 3200 mm Cutting Depth: 140 mm Scoring Unit: No Saw Blade Height Adjustment: Electric Saw Blade Tilt Adjustment: Electric Rip Fence Adjustment: Electric / Position Control Saw Blade Angle Display: Digital Cutting Height Display: - Rip Fence Display: Digital Crosscut Fence Display: Scale Saw Blade Diameter: 400 mm Speeds: 3 Motor Power: 7.5 kW Motor Brake: Yes, automatic Extraction Connection: 80 mm and 120 mm Hjdpfx Afevxi Ddsweff Machine Length: 3900 mm Machine Width: 2200 mm Weight: 1000 kg

Stanje: dober (rabljeno), Koda: 0299 Znamka: SCM Model: S 630/E - CE standard Avtomatski debelinski skobeljni stroj za mizarske delavnice, izdelavo pohištva po meri, lesena okenska okna, lesno mizarstvo, žage, plastiko, kompozitne materiale in razne druge namene - CE standard Tehnični podatki: Hjdjyi E T Topfx Afwsff Elektronska nastavitev višine mize Pnevmatska nastavitev pritiska valjev Pogonski sistem s 3 velikimi motoriziranimi zgornjimi valji - enostavno zamenljivi Elektronski variator hitrosti podajanja 4/20 m/min Dimenzije delovne mize: 630 x 1000 mm Maksimalna delovna širina: 630 mm Minimalna/maksimalna delovna višina: 3/300 mm Minimalna delovna dolžina: 260 mm Število nožev: 4 Motor: 7,5 KM Motor podajanja: 2 KM Premer sesalne cevi: 150 mm Skupne dimenzije (mm): 1360 x 1080 x 1220 (v) Teža: 1000 kg