Navpično balirki

Orwak 3810

Leto izdelave: 2021, Stanje: novo, Enoglava rezalna žaga OMC RONDA 700, nova Stroj na zalogi - žagin list premera 700 mm - hidro-pnevmatsko podajanje - pnevmatski nagib na obe strani, s fiksnimi kotnimi nastavitvami 22,5° - 45° - 90°. Za vmesne kote z ročnim mehanskim omejilcem - 2 navpična in 2 vodoravna prijemala Pjdpfxjhrukio Adyjgg - sistem mazanja lista s pršilno meglico - popolna pnevmatska zaščita

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, - Concasseur à percussion primaire, marque Laron, modèle IM 16 - Ensemble complet disponible en version mobile ou stationnaire. - Roulements du rotor neufs - Barres de percussion du rotor neuves - Platine frontale presque neuve Pgsdpsimwg Hsfx Adyeg - Capacité de production : 800 t/h - Ouverture d’alimentation : 2320 x 1700 mm. Moteur de 600 ch. - Roulements et supports neufs - Barres de percussion du rotor neuves - Alimentateur à tablier articulé : largeur 2 000 mm, longueur 10 000 mm. Réducteur et moteur 40 ch. État de l’alimentateur : quasi neuf. - Pré-tamiseur à disques : largeur 2 000 mm, diamètre 1 000 mm. Réducteur et moteur électrique. - Trémie d’une capacité de 40 m³. Assemblée boulonnée, démontable en plusieurs morceaux pour le transport. - L’ensemble est monté sur un châssis doté d’une attache pour tracteur routier et transportable sur essieux dolly. Nous disposons également de broyeurs secondaires à marteaux, de cribles et de convoyeurs pour compléter une installation clé en main.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2012, obratovalne ure: 25.895 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 78 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 24.000 kg, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), volumenski pretok: 930 m³/h, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of manufacture: 2012 Total machine operating hours: 25,895 hours (as of July 2025) Pump effective operating hours: 14,135 hours (as of July 2025) Total number of bales pressed: 235,597 pcs (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/h Throughput under operating conditions: 410 m³/h Pgjdpfx Adevwlqqsyog Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying system: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 9 to 12 t/h, depending on material - 50 kg/m³: approx. 14 to 17 t/h, depending on material - 100 kg/m³: approx. 16 to 25 t/h, depending on material Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/h, depending on material Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Installed dimensions with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (press only): 10,985 x 2,300 x 2,900 mm Machine weight (press): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. Upon completion of the works, it has been tested in both manual and automatic mode during live operation. The following refurbishment works were carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank drained completely and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers on the press ram dismantled and replaced - Wire station with deflection rollers for the lower wire cleaned and made operational - Side guides removed from press ram, smoothed, mounted, and readjusted - Main hydraulic cylinder dismantled and stripped for inspection - Piston rod replaced, cylinder tube honed - Complete set of seals replaced, pressure test performed - Hydraulic hose for main hydraulic cylinder replaced - Vertical and horizontal needle binding systems dismantled, cleaned, wire deflection rollers serviced - Chain cleaned, greased, and chain tension readjusted - Drillomat cleaned, wire cutter, twisting shafts and fingers checked, serviced, and retightened with torque control - Door contact switches checked and partially replaced - Emergency stop switch checked - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers under the press replaced - New safety guards for vertical and horizontal binding fabricated and installed - Machine checked, general maintenance performed, and baler tested in both manual and automatic operation Scope of delivery: Only the baler itself is being offered for sale. Remarks: Complete documentation is available (operating manual, CE declaration, electrical/hydraulic schematics). Viewing is possible by appointment. No liability is accepted for the technical information or potential errors.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, skupna masa: 35.000 kg, stiskalna sila: 250 t, vrsta vhodnega toka: trifazni, moč: 30 kW (40,79 KM), prebijalna sila: 250 t, vhodna napetost: 200 V, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, AIDA NC2-250(1) 250t Eccentric Press in Excellent Condition /ctA2/ Manufacturer: AIDA Model: NC2-250(1) Press Force: 160t Year of Manufacture: approx. 1991 Stroke Length: 170 mm Clearance Over Table: (adjustable) 280–400 mm Table Dimensions: 2700 x 760 mm Ram Dimensions: 2100 x 700 mm Electrical Supply: 3x200V (!!), 30kW – Japanese standard Pgjdpju Dxb Tsfx Adyeg Net Weight: 35,000 kg Dimensions: 2760 x 2800 x 3980 mm Automatic lubrication system. Automatic cutting oil dosing – RAZIOL EST-02 Optional with Decoiler and Straightener.

Stanje: rabljeno, Leto izdelave: 2021, obratovalne ure: 4.826 h, Equipment: Basic package Inventhor Type 9 MTU diesel engine 6R1300, 390 kW at 1,700 rpm, compliant with EUROMOT V emission standard Auxiliary hydraulic connections: 30 l/min and 70 l/min Roller drive via planetary gearbox 380 kW – VARIO – Load-sensing system Fuel tank: 950 liters Discharge conveyor: belt length 4,450 mm, belt width 1,000 mm Centrally positioned wear strips 24 V electric control system Additional electric pump for operating the following functions when the engine is off: Raise/lower/fold discharge conveyor, open/close comb flap, open/close comb, lift/lower optional permanent magnet belt, lift/lower optional folding hopper Complete radio remote control Large side GRP maintenance doors Easy-access engine compartment with LED lighting Hydraulically reversible fan Loading protection on both sides Fire extinguisher Maintenance ladder Toolbox Audible start-up warning Doppstadt telematics system Pgedpfx Aevnmldjdysg Paintwork: RAL2011 deep orange Special equipment: 500 mm track undercarriage unit Track undercarriage 500 mm flat Shredding system Size "L" – VARIOMAT Size "L" – "Limiter" (20 pieces) Discharge conveyor: 7 m length, 1,200 mm wide LED lighting package for engine compartment and rear Watering system with hopper extension H = 300 mm Frame for overband magnet 2 t permanent overband magnet

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, številka stroja/vozila: 100810261, vrsta hlajenja: voda, SHINOHARA 75 VP REVERSING PRESS (1+4 COLORS) Pedpfx Aotvmq Nsdyjgg CIP3. AUTOMATIC BLANKET WASHING, AUTOMATIC WASH-UP. UV LAMPS. WATER CHILLER WITH AUTOMATIC ALCOHOL PH MIXING. AUTOMATIC COUNTERS. INCLUDES WASH CLOTH REWINDER WITH THE MACHINE. PILING ELEVATOR. 2 CALIBRATION DEVICES. 20 SPARE ROLLERS. IMPRESSIONS: 4,600,000

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2018, obratovalne ure: 6.070 h, Jenz BA 965 DL Titan - Year of manufacture: 2018 - Operating hours: 6,070 - Engine: Mercedes MTU, 630 HP - AdBlue - Remote control - Hydraulic drive (self-propelled) Pgjdpfoxmvn Isx Adyeg - Weight: 25,000 kg The machine has been workshop overhauled and is immediately available.

Stanje: rabljeno, Leto izdelave: 1988, obratovalne ure: 1 h, številka stroja/vozila: V 516, skupna širina: 2.000 mm, skupna dolžina: 7.000 mm, skupna višina: 1.800 mm, obratovalni tlak: 300 letvica, stiskalna sila: 90 t, maks. debelina aluminijaste pločevine: 5 mm, moč: 11 kW (14,96 KM), lastna masa: 16.000 kg, rezalna sila: 90 t, leto zadnje generalne obnove: 2025, Package dimensions: 400x400 mm Pjdelhqd Repfx Adyogg Pressing force, stage 1: 900 kN Pressing force, stage 2: 900 kN Steel throughput: 2,500–3,500 kg/h Aluminium throughput: 2,000–3,000 kg/h Drive power: 11 kW Installation area: 7 x 2 x 2.5 m Machine weight: 16 t With wheels or oil collection tray Location: Austria Available from: 30/01/2026

Leto izdelave: 2010, Stanje: rabljeno, Mettler Toledo PAS 3012 kontrolna tehtnica s etiketirko. Glava za etiketiranje je električno pomična v vse smeri za natančno pozicioniranje etiket. Psdpfxeivnqco Adyogg - Največja masa: 6 kg - Najmanjša masa: 0,020 kg - E: 0,001 kg - Zasnovano za 70 paketov na minuto

Stanje: rabljeno, Leto izdelave: 2025, obratovalne ure: 15 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 204065, Used Machine CNC Cutter/Plotter Cutting Area in X and Y: 3,500 x 2,100 mm Multifunctional CAM cutting system utilizing CNC blade technology for 2D cutting of leather, fabric, technical textiles, foam, and other sheet-type, semi-flexible, or rigid non-metallic materials Features of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold equipped with a driven rotary knife, an electrically oscillating knife, and a milling unit (including extraction system) • Multifunctional tool head holds up to 2 interchangeable tools • Powerful vacuum blower for material fixation • Standard delivery includes gray conveyor belt table. Green-blue exchange conveyor available (offers high contrast for dark materials) Podpsif Ek Rjfx Adyogg Additional tools are available upon request: • EOT Electric Oscillating Tool • POT Pneumatic Oscillating Tool • PRT Driven Rotary Tool • UCT Universal Cutting Tool (drag knife) • KCT Kiss-Cut Tool • CTT Creasing Tool • V-Cut Angle Cutting Knife • Printer mark detection • Camera registration • Punching tool for notches or holes • Milling unit with extraction system User-friendly • Easily interchangeable cutting tools, “PLUG & CUT” • Intuitive user interface • Quick blade change • Vacuum zones can be activated at the touch of a button Rapid return on investment • Low operating costs with high added value • Optimal material utilization possible with nest expert software modules (not included) • High speed • Consistent precision Data: • Short cutting times due to high positioning speed up to 90 m/min • Repeat accuracy ±0.25 mm • Cuts single or multiple layers • Suitable for both sheet and roll materials (optionally expandable with appropriate unwinder) • Rapid ROI (Product photo for illustration purposes) The machine is CE-certified.