Lamelarna stiskalnica

Ormamacchine LS/L/R 30 13

Stanje: zelo dobro (rabljeno), MEMBRANE PRESS For laminating MDF panels with PVC, PP, and PET with VARIOPIN fully automatic underlay system Automatic front loading/unloading and preparation table (double tray cart 1500 x 2800 mm) Max. total pressing force: 2,400 kN Operating pressure: 320 BAR Panel dimensions (mm): 1500 x 2800 Usable working area (mm): 1250 (or 2 x 600) x 2550 Iedpfx Agsrwxz Repsa Front loading width from 1500 mm (usable width 1250 mm) Separate control cabinet and controls (with electronic programming device) SIEMENS SIMATIC Touch Panel Total installed power: approx. 50 kW OPTIONAL "Paternoster" roller magazine Unwinder (roll holder) with coating film cutting system

Leto izdelave: 2002, Stanje: dober (rabljeno), AXES TRAVEL X AXIS (longitudinal) (mm): 7,700 Y AXIS (transversal) (mm): 470 Z AXIS (vertical) (mm): 420 A AXIS (spindle rotation): 0° ÷ 180° ELECTROSPINDLE Maximum power in S1 (kW): 8 Maximum speed (rpm): 24,000 Tool holder taper: HSK - 63F Automatic tool clamping: ● Cooling with heat exchanger: ● ONBOARD AUTOMATIC TOOL MAGAZINE Maximum number of tools in magazine: 8 Maximum number of angular heads insertable in the tool magazine: 2 Maximum saw blade diameter storable in the magazine (mm): Ø = 180 FUNCTIONALITY Multi-piece operation: ● Dynamic pendulum operation: ● WORKABLE FACES With direct tool (top face, side faces): 3 Iedpfx Asrupldegpea With angular unit (side faces, end faces): 2 + 2 With saw blade tool (top face, side faces, end faces): 1 + 2 + 2 TAPPING CAPACITY With compensator: M8 Rigid (optional): M10 WORKPIECE CLAMPING Standard number of clamps: 8 Maximum number of clamps: 12 Independent motorized clamps: ● Maximum number of clamps per zone: 6

Stanje: novo, Holzkraft minimax me 35 t s edge banding machine 5507235 For plastic edging from 0.4 - 3 mm, solid wood edging up to 5 mm, and workpieces from 8 - 50 mm Top configuration for high productivity with minimal space requirements! Intuitive operation with the eye-S control and large 10" touchscreen: HMI Maestro Active Edge; graphical display of all processing units and their operating status; graphical simulation of machining operations; control of all machining units; regulation of glue pot temperature; assistance functions for machine setup according to the machining program; error diagnostics for rapid resolution of simple faults; statistics on processing parameters; USB port; prepared for network connection. Excellent accessibility to the working units thanks to the large hood, which ensures protection and noise reduction Monoblock steel frame construction guarantees high stability and rigidity of the machine Automatic unit positioning when changing panel thickness Automatic application of strip edging with edge magazine (me 35 t s): solid wood strips are automatically loaded and synchronized with the panel feed Panel feeding by chain conveyor with rubber-coated glide shoes Extendable workpiece support Quality Made in Italy TECHNICAL DATA Dimensions and weights Length (product) approx. 3314 mm Width/depth (product) approx. 1085 mm Height (product) approx. 1300 mm Weight (net) approx. 545 kg Flush radius trimming unit Flush radius trimming unit power 2 x 0.35 kW Flush radius trimming unit cutter diameter carbide 55.3 mm Flush radius trimming unit cutter speed 12,000 rpm Flush radius trimming unit extraction port diameter 2 x 60 mm Electrical Data Iodpfx Agekknbqspea Connection voltage 400 V Mains frequency 50 Hz Glue unit Glue pot power 0.25 kW Glue pot operating temperature 190°C Glue pot extraction port diameter 60 mm Glue pot filling capacity 0.8 kg Pneumatic connection Operating pressure 6.5 bar Feed Feed unit power 0.55 kW Feed speed 7 m/min Edging Edgeband thickness, coil material 0.4–3.0 mm Edgeband thickness, strip material 0.5–5 mm Pre-milling unit Pre-milling unit extraction port diameter 2 x 80 mm Pre-milling unit power 3 kW Pre-milling unit cutter speed 7,200 rpm Pre-milling unit diamond cutter diameter 80 mm Pre-milling unit cutter height 56 mm Pre-milling unit material removal 0.5 / 1 / 1.5 / 2 mm Scraper units Radius scraper 2 mm Buffing unit Buffing unit power 2 x 0.14 kW Buffing unit speed 2,800 rpm Workpiece Workpiece thickness 8–50 mm Workpiece length min. 120 mm Workpiece width min. 110 mm Holzkraft authorized dealer – Accessories available on request!

Stanje: novo, Leto izdelave: 2024, Na zalogi je vrhunska horizontalna CNC mozničarka STARTECH CN Plus. Ijdpeip Dh Ijfx Agpja

Stanje: rabljeno, Number of spindles: 6 pcs Working width: 240 mm Planing height: 200 mm Jointing table length: 2500 mm Feed motor: 4 kW Feed speed: 6–36 m/min Dimensions (L/W/H): 5000 x 1750 x 1700 mm SCM Superset PLUS Comp. 31, also suitable for window manufacturing ----- Machine is cleaned and function-tested! Technical data: ----- Working width: max. 240 mm Working height: max. 200 mm Feed: 6 to 36 m/min Iedpfevnv Uzex Agpea 1st spindle ----- First lower spindle, horizontal Motor with brake: 11 kW Diameter: 40 mm Speed: 6,000 rpm 2nd tool holder HSK ----- First right tool holder, vertical Motor with brake: 7.5 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning 3rd tool holder HSK ----- First left tool holder, vertical Motor with brake: 7.5 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning Electronic tool diameter setting (setup) 4th spindle ----- First upper spindle, horizontal Motor with brake: 11 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning Electronic tool diameter setting (setup) 5th spindle ----- Second upper spindle, horizontal Motor with brake: 7.5 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning Electronic tool diameter setting (setup) 6th spindle ----- Second lower spindle, horizontal Motor with brake: 7.5 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning Additional technical features: ----- 2 feed units after the upper spindles for reducing the axle distance from 620 mm to 450 mm Air cushion lubrication in the worktable 2 x milling units with belt drive with quick-change HSK 85 system at positions 2 – 3 Working height 200 mm instead of 120 mm 5 x electronic horizontal positioning at positions (2 – 3 – 4 – 5 – 6) + (31.14.05 tandem feed after position 2) 4 x electronic vertical positioning at positions (2 – 3 – 5 – 6) 3 x electronic tool diameter setting (setup) at positions (3 – 4 – 5) Mobile 10 control system PRL equipment for cutting out glazing beads on 2nd upper horizontal spindle Machine is offered without tooling (Technical specifications according to manufacturer – subject to change!)

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 2.000 mm, skupna širina: 1.250 mm, skupna višina: 2.000 mm, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, moč: 40 kW (54,38 KM), premer žaginega lista: 450 mm, širina obdelovanca (maks.): 300 mm, višina obdelovanca (maks.): 30 mm, zračni tlak: 6 letvica, premer povezave za izpihovanje: 200 mm, premer honanja: 125 mm, število vreten: 2, MARINUS PROMAX – Endenbearbeitungs- und Defektsägemaschine Die Maschine entspricht den folgenden Spezifikationen: Iedpfsq Auhdex Agpea • Robuste und schwere Bauweise, Abmessungen LxBxH = 2080x1260x2000 mm. • Durchlaufzuführung mit präziser Positionierung (Servo-Antrieb). • Pneumatische Seitenanschläge für garantiert rechtwinklige Bearbeitung. • SPS-Steuerung. • Bedienung über Terminal. • Modem für Fernprogrammierung. • 2 Servomotoren für maximale Dynamik. • 2 Sägemotoren (3,0 kW). • 2 Hochgeschwindigkeits-Fräsmotoren mit Frequenzumrichter (je 7,5 kW / 200 Hz / n=12.000). • 1 Getriebemotor mit Frequenzumrichter. • 2 Trommelmotoren. • 26 pneumatische Zylinder mit Ventilen. • 1 Lumineszenzsensor • 6 Induktivsensoren • Bandförderer für Abfall, Höhe 1,3 m. • Maschine komplett durch Sicherheitstüren gekapselt. • Maschine gemäß CE-Vorschriften. Längenmesssystem: Ein Längenmesssystem zeigt während der Produktion die Gesamtlänge und die Quadratmeter der Bretter am Display an. Werkzeugausstattung: Optional können wir Werkzeuge (Nut und Feder) mit Wendemessern sowie zwei Kappsägeblätter für die Maschine anbieten. Standardprogrammierung: Die Maschine verfügt über zwei Hauptprogramme: 1. Endenbearbeitung 2. Zuschnitt Beide Hauptprogramme beinhalten zwei Unterprogramme: 1. Variable Längen: Defekte werden ausgeschnitten, Endprodukte haben variable Längen. 2. Feste Längen: Bretter werden in einer festen Länge produziert, die Einfuhrlänge darf maximal +200 mm Übermaß betragen. Defekte können hierbei nicht ausgeschnitten werden. • Min. Breite: 60 mm • Max. Breite: 300 mm • Min. Länge: 500 mm • Max. Länge: 6000 mm • Min. Stärke: 10 mm • Max. Stärke: 30 mm

Stanje: novo, Leto izdelave: 2023, Working width: 600 mm Working height: 280 mm Minimum workpiece length: 250 mm Units: 2 brush stations centrally adjustable, each with individual fine adjustment Diagonal brush technology: Yes, continuously adjustable from -7° to +7° 1st brush: Metal brush, diameter 220 mm 2nd brush: Tynex brush, grit 80, diameter 220 mm Height adjustment: electric Height display: mechanical counter Feed speed: 4 – 12 m/min Brush motor power: 2 x 4 kW Feed motor power: 0.37 kW Ijdemftk Aspfx Agpja Machine length: 1.5 m Machine width: 1.5 m Weight: 700 kg

Leto izdelave: 2002, Stanje: skoraj kot novo (rabljeno), L x W x H: approx. 12.1 x 3.0 x 3.25 m Volume: 55 cbm Conveying capacity: approx. 150 m³/h 6 dosing/discharge screws – driven in pairs, each with 11 kW Weight: approx. 15 t Previously operated in an RDF facility Iodpfx Agsllvpzepea

Stanje: zelo dobro (rabljeno), a truly unique one-off piece, approx. 12 x 6 m Ijdpfx Asfi Tmcegpoa

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SK-K-24001, 1 Optimisation cross-cut line with scanner Make: Dimter Model: OptiCut 450 Iodpjwya Syofx Agpsa Year of manufacture: 2015 Item No.: SK-K-24001 DIMTER cross-cut saw line comprising: - 1 x OptiCut 450 - Infeed system F 100 - LuxScan CombiScan+ C 200 with curvature measurement The machine was in operation until 2024, has been professionally dismantled, and can be inspected in this condition.