Center stružnica

Optimum OPTIturn TZ 4 (3432242)

Optimum OPTIturn TZ 4 Precision Lead Screw and Feedscrew Lathe

Precision lead screw and feedscrew lathes with digital position indicator DPA 32 and quick-change tool post.

DESCRIPTION:
- Hardened and ground Z-axis guideways
- Motor protection switch
- Control cabinet with 24 V DC power supply
- Partial enclosure with integrated, large-dimension chip guard
- Chip guard featuring built-in position indicator, coolant hose, and additional control panel
- Dual-channel safety electronics
- Cross and compound slide spindles are hardened and ground, adjustable via split nut
- Leadscrew and feedscrew cover
- Fine-stepped feed and thread cutting range
- Energy chain for gentle cable and hose routing
- Machine comes pre-installed with standard gears for metric thread pitches and module threads. Change gears for imperial and D.P. threads optionally available
- Switches with lifecycle calculation tested according to EN ISO 13849
- Decoupled handwheels tested according to EN 23125
- Safety handwheels with disengagement function on X and Z axes
- Pull-out chip tray to the front
- Coolant system included
- Quick-change tool post SWH 5-B
- Tool holder 25 x 120 Type D for square tools up to 20 mm
- LED machine lamp for complete illumination of the working area

Technical Specifications:
Dimensions and Weight
- Length (product) approx. 1960 mm
- Width/Depth (product) approx. 1060 mm
- Height (product) approx. 1690 mm
- Weight (net) approx. 1250 kg

Working Areas
- Center height: 200 mm
- Distance between centers: 800 mm
- Swing over bed: 400 mm
- Swing over cross slide: 245 mm
- Bed width: 260 mm

Speed Range
- Number of speed steps: 16
- Speed range: 45 – 1800 rpm

Electrical Data
- Drive motor power: 3 / 4.5 kW
- Connected voltage: 400 V
- Mains frequency: 50 Hz
- Total connected load: 6 kW

Coolant System
- Coolant system power
- Coolant pump: 0.125 kW

Spindle
- Spindle mount DIN ISO 702-1 No. 5 Form A2
- Spindle bore/bar capacity diameter: 52 mm
- Chuck passage diameter: 52 mm
- Spindle taper: MT 6

Tailstock
- Tailstock taper: MT 3
- Tailstock quill travel: 110 mm
- Tailstock quill diameter: 50 mm

Thread Cutting
- Metric pitch: 0.2 – 14 mm/rev
- Number of metric pitches: 26
- Imperial pitch: 80 – 1 TPI
- Number of imperial pitches: 42
- Diametral pitch: 3 – 200 DP
- Number of diametral pitches: 33
- Module thread pitch: 0.1 – 7 mm/rev
- Number of module thread pitches: 44

Travel
- Cross slide travel: 112 mm
- Compound slide travel: 212 mm
- Saddle travel: 800 mm

Feeds
- Longitudinal feed range: 0.0263 – 1.8416 mm/rev
- Number of longitudinal feeds: 48
- Facing feed range: 0.0133 – 0.9321 mm/rev
- Number of facing feeds: 48

Scope of Delivery
- Fixed steady rest, Ø 10 - 130 mm
- Travelling steady rest, Ø 10 - 100 mm
- Reducing sleeves MT3 and MT6
- Fixed center MT3
- Quick-change tool post 5-B
- Tool holder 25 x 120 Type D for square tools
- Set of change gears for metric threads
- Initial machine fill with quality oil
- Operating tools
Dcedpfxshbdz Se Adhen
- Integrated coolant system

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.