Center stružnica

Optimum OPTIturn TH 4010

Stanje: novo, Leto izdelave: 2025, CORMAK HBS320 for double-sided miter cutting in the range from -45° to +60°. The machine’s design is based on solutions and projects developed by Polish engineers. Its precision and quality place it at the forefront of band saws, capable of cutting materials up to 320 mm in width. A key advantage of the machine is the latest-generation hydraulic cylinder. The machine features a reinforced vice base and a quick-clamping vice. Machine Features The CORMAK HBS320 metal band saw enables cutting material at any angle between -45° and +60°. Workpieces can be fed manually or by any feeding device. The feed during cutting is gravity-based, utilizing oil flow in the hydraulic cylinder. The operator starts the machine by pressing the start button and sets the cutting speed. After the cutting cycle is completed, the machine automatically stops and the operator raises the arm to the starting position. The saw arm is made from a very robust, single-piece grey cast iron casting. Combined with a 27 mm wide saw blade, it is perfectly suited for serial cutting of structural, stainless, and tool steels. The vice is mounted on an adjustable bed and features quick-release clamping. The blade guides are equipped with ball bearings and carbide inserts, ensuring excellent precision and straightness of the cut. This has a significant impact on band guidance, blade longevity, and cutting quality. The carbide guides greatly reduce wear on both the machine and the blade. The base is a rigid body constructed from welded steel sheets. Inside, there is a separate coolant tank with an electric pump. The top of the base is designed as a tray to collect coolant and chips generated during material cutting. A cast iron worktable with a double-sided pivoting arm and control panel is mounted to the base. Feed rate is adjusted from the control panel. Two blade speeds are available: 44 and 88 m/min. When the saw arm is in the lower position (after the cut), the blade drive automatically switches off. Safety is ensured by blade guards and microswitches that stop the motor when the cutting cycle is complete or any guard is opened. An additional safety feature is automatic shut-off in the event of blade breakage. Technical Data Ø MAX - 260 mm (straight cut) H x W MAX - 320 x 160 mm (straight cut) POWER SUPPLY - 3 phase 400V TOTAL POWER - 1.5 kW ARM DESCENT CONTROL - hydraulic cylinder BLADE LENGTH - 2740 x 27 x 0.9 mm BLADE SPEED - 44 / 88 m/min VICE BASE HEIGHT - 920 mm DIMENSIONS - 1400 x 880 x 1550 mm Dkodpfxei D Dgwj Afljg WEIGHT - 280 kg Cutting Parameters Angle 0º -----ø260 320 x 160 255 x 255 45º R ø210 210 x 200 210 x 210 60º R ø135 135 x 130 130 x 130 45º L ø160 220 x 130 160 x 160 Price stated is NET. The price does not include shipping costs. For more information, please contact us by phone or email. We invite you to view our full offer on our website.

Stanje: novo, številka stroja/vozila: Baureihe GSE / Neumaschine, Economic Granulators: This GSE series is ideal for all injection molding and blow molding operations. It is fundamentally suitable for all thin-walled plastic waste. Not only the attractive purchase price, but also the robust, split steel/welded housing, easy cleaning capability, as well as simple knife and screen changes, distinguish these granulators. The tangential housing design, in combination with V-cut rotors (except for the GSE 300/300), ensures that even bulky and large-volume materials are accepted and granulated by the rotor. Granulate Conveying: As standard, the granulators are equipped with an extraction system and bagging station. Dksdpfx Ajghgbtsfljg Optionally, a collection bin for regrind is also available, which, like the extraction tray, is made from stainless materials.

Stanje: novo, Swing diameter 420 mm Turning length 1500 mm Swing diameter over cross slide 250 mm Swing diameter in the bed gap 590 mm Center height 210 mm Turning length in the bed gap 260 mm Spindle speed(s) 16 (45-1800) rpm Tailstock taper MK 4 Quill stroke 120 mm Quill diameter 50 mm Spindle nose DIN ISO 702-2 No. 6 Dsdpfx Ask Egrpefljkg Spindle bore 52 mm Spindle taper MK 6 Longitudinal feed 17 / 0.05 - 1.7 m/min Face feed 17 / 0.025 - 0.85 m/min Total power requirement 4.6 kW Machine weight approx. 1340 kg Space requirement approx. 2440 x 915 x 1375 mm Fully equipped lead and feed screw lathes. TH 4215 with digital position display DPA 21 / 3462070 - Hardened and ground Z-axis guideways - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely machined carriage - Handwheels with adjustable fine graduation 0.04 / 0.02 mm - Four-way tool post - All guides adjustable with gib strips - Top slide adjustment range ± 90° - Guaranteed spindle nose concentricity better than 0.015 mm - Main spindle runs in oil bath - Gear wheels smooth-running, hardened and ground, mounted with 2 adjustable precision taper roller bearings - Handwheels decoupled and tested to EN 23125 - Two-channel right-left selector switch tested to EN 23125 - Switches with life cycle calculation, tested to EN ISO 13849 - All metric threads from 0.2 to 14 mm/rev and all inch threads from 72 to 2 TPI adjustable via control panel shift lever, no change gears required - Forward/reverse on carriage operable via shift spindle - Central lubrication in carriage - Machine base and bed cast as single Meehanite piece - Leadscrew cover - Emergency stop pedal - Safety handwheels with disengagement function in X and Z axes - Tailstock adjustable ± 10 mm for taper turning - Tailstock quill and handwheel with adjustable fine graduation 0.025 mm - Rapid, simple, tool-free adjustment via clamping lever - Strongly ribbed prismatic bed, induction-hardened and precision ground, made of cast iron - Coolant system with separate tank, fill level indicator, and oil separator; easy and complete draining and cleaning to DIN standard - LED machine lamp at chip guard Models TH 4210D and TH 4215D with digital position display DPA21 - User-friendly membrane keypad, splash-proof, sealed and glare-free - Glass linear scales Scope of delivery - Fixed steady rest, capacity Ø 15 - 145 mm - Travelling steady rest, capacity Ø 10 - 75 mm - LED machine lamp - Reducing sleeve MK 6 / MK 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial machine fill with quality oil - Operating tools Including special accessories: OPTIMUM 3-jaw lathe chuck, self-centering, Ø 250 mm Quick-change tool post SWH5-B set

Stanje: novo, Discover our selection of robust and precise conventional lathes Are you looking for a reliable lathe to boost your productivity? Experience precision and performance with our new range of conventional lathes, complete with extensive accessories. Our machines offer turning diameters from 400–1000 mm and turning lengths up to 10 metres, and are also available as cycle-controlled variants. With various models, you have limitless possibilities. Many machines are in stock and available at short notice! Explore our comprehensive range of special accessories, such as hollow spindles, infinitely variable spindle speeds, Siemens controls, and much more—making your lathe even more versatile. Whether for complex workpieces or demanding applications, our machines always provide the best results. Rely on our many years of experience and let’s optimise your machining processes together. Invest in quality and precision—contact us today! Here is a selection of STOCK MACHINES (see images); on request, we are happy to offer other models or custom-built machines: TECHNICAL SPECIFICATIONS: DLZ Series including BAFA subsidy of 15% and more! Swing over bed: 400–1000 mm Turning length: 1000/1500/2000/3000 mm Spindle bore: 80 (optionally 105) mm Workpiece weight up to 2 t Spindle speed up to 2800 rpm ACCESSORIES: Digital readout, 3-jaw chuck, faceplate, Multifix toolholder, and much more. Extensive SPECIAL ACCESSORIES such as stepless spindle speed, steady rests, larger spindle bores, etc. to make the machine even more productive: CURRENTLY AVAILABLE NEW MACHINES with warranty and BAFA subsidy, e.g. - SDM 850: swing over bed 850 mm, turning length 3 m - DLZ 325: swing over bed 650 mm, turning length 2 and 3 m - DLZ 250: swing over bed 500 mm, turning length 1 and 1.5 m - DLZ 200: swing over bed 400 mm, turning length Further models (including cycle control) available on request. Contact us now and discover the world of innovative turning technology! Dedpfx Aed Afn Iofljkg Our services for you: • Consultation and solutions directly at your site • Organisation of transport for your machine to your facility • Delivery, installation, commissioning, and handover ready for operation • Financing and review of grant opportunities through KFW and BAFA, among others.

Stanje: rabljeno, Leto izdelave: 2010, Funkcionalnost: omejena funkcionalnost, potovalna razdalja osi X: 1.626 mm, pomik osi Y: 813 mm, pomik po osi Z: 762 mm, nazivna (navidezna) moč: 22 kVA, proizvajalec krmilnikov: Haas, model krmilnika: MOCON 17.28, širina mize: 1.626 mm, dolžina mize: 710 mm, skupna masa: 12.000 kg, največja hitrost vretena: 7.500 obr/min, število vreten: 1, število mest v zalogovniku orodij: 30, vrsta vhodnega toka: trifazni, Oprema: transportni trak za ostružke, Vertikalni 3-osni obdelovalni center Haas VF6 / 50 HE Stroj z linearnim vodenjem in do 610 Nm (pri 500 vrt./min) Pomiki: X 1626 mm Y 813 mm Z 762 mm Linearni merski sistem 2-stopenjsko menjalno vreteno SK50 s 7500 vrt./min in 22,4 kW Dedpfxew Rbx Us Aflokg Avtomatski menjalec orodij s 30 +1 mesti Notranja dovod hladilne tekočine s 1000 psi (pribl. 70 bar) Rezervoar za hladilno tekočino: 360 litrov Spiralni transporter ostružkov Vključno z: Odstranjevalec oljne megle Ethernet vmesnik RENISHAW brezžični merilni sistem za orodja Dodatna menjava za nalaganje orodij v stroj Omogočeno makro programiranje Stroj je le delno funkcionalen.

Stanje: novo, OPTIMUM OPTIsaw S275N Metal Bandsaw - Display Model - Infinitely adjustable feed, swiveling ----- Technical Specifications ----- Swivel Range: 0 - 60°, Cutting Height: 150 mm, Cutting Depth: 230 mm, Blade Speed: 45 / 90 m/min, Blade Length: 2,480 mm, Motor (400 V): 1.1 kW, Dimensions (LxWxH): 1,400 x 530 x 1,360 mm, Dedpfeu R S Hpjx Aflokg Weight: 185 kg - new display machine -

Stanje: rabljeno, TECHNICAL DATA - Table size: 700 x 480 [mm] - Dielectric capacity: 600 [l] TRAVEL - Travel X/Y/Z axes: 350 x 250 x 250 [mm] - Travel U/V axes: +/- 90 [mm] - Max. taper: [°/mm] WORKPIECE - Max. workpiece dimensions: 900 x 680 x 250 [mm] - Max. workpiece weight: 400 [kg] Dsdpfx Afeuhq Rloljkg - Surface finish quality: 0.125 [μm] WIRE GUIDING - Wire diameter: 0.15 - 0.30 [mm] - Spool weight: 5 - 8 [kg] - Speed: 30 - 270 [mm/sec] ELECTRICAL SUPPLY - Supply voltage: 380 [V] - Total drive power: 11 [kVA] WEIGHT AND DIMENSIONS - Space requirement: 2500 x 2500 [mm] - Machine height: 2200 [mm] - Machine weight: 2890 [kg] MACHINE HOURS - Operating hours: 1266 [h] ACCESSORIES - Control: Charmilles Pentium III CPU - Remote control - Coolant tank

Stanje: novo, Leto izdelave: 2025, For up-to-date prices and delivery times, please inquire. Dimensions and Weights: Length (product): approx. 4450 mm Width/Depth (product): approx. 1150 mm Height (product): approx. 1650 mm Weight (net): approx. 3000 kg Working Ranges: Centre height: 280 mm Centre distance: 2910 mm Swing diameter over bed: 560 mm Swing diameter in gap: 790 mm Swing diameter over cross slide: 355 mm Turning length in gap: 170 mm Bed width: 350 mm Speed Range: Number of speed ranges: 12 Speed range: 25 – 1600 rpm Electrical Data: Drive motor power: 7.5 kW Connected voltage: 400 V Mains frequency: 50 Hz Coolant System: Coolant pump power: 125 W Spindle: Spindle mount: Camlock DIN ISO 702-2 No. 8 Spindle bore/bar capacity diameter: 80 mm Tool post mounting height: max. 25 mm Dkjdpoq Ukc Refx Afljg Spindle taper: MK 7 Tailstock: Tailstock taper: MK 5 Tailstock quill travel: 180 mm Tailstock quill diameter: 75 mm Threads: Metric thread pitch: 0.2 – 14 mm/rev Number of metric pitches: 47 Inch thread pitch: 112 – 2 TPI Number of inch pitches: 60 Diametral pitch: 4 – 112 DPI Number of diametral pitches: 50 Module thread pitch: 0.1 – 7 mm/rev Number of module pitches: 34 Travel: Top slide travel: 130 mm Cross slide travel: 316 mm Bed slide travel: 2710 mm Feeds: Longitudinal feed range: 0.059 – 1.646 mm/rev Number of longitudinal feeds: 35 Cross feed range: 0.020 – 0.573 mm/rev Number of cross feeds: 35 Electrical Connection: Total connected load: 8.5 kW

Stanje: novo, Leto izdelave: 2024, The SCHORR RR500DHKAHR tracked dumper is specifically designed for transporting heavy and bulky materials such as timber or pipes. With a payload capacity of 500 kg and a powerful 9.2 HP single-cylinder 4-stroke petrol engine, it handles demanding tasks effortlessly. The robust transmission with 6 forward and 2 reverse gears ensures precise control. The strong crawler drive ensures that the dumper operates reliably even in challenging terrain, on inclines, and over curbs. Rubber tracks provide secure footing and stability on all types of surfaces – from muddy fields to gravel paths. The hydraulic tipper drive of the RR500DHKAHR offers clear advantages, even in the timber cradle version. Heavily loaded cargo such as logs or long materials can be easily secured and transported. The sturdy construction ensures stability and keeps the load safely in place, even on uneven ground. The large hydraulic oil tank with integrated oil filter contributes to the dumper’s durability and minimizes maintenance requirements. Thanks to its powerful hydraulic system, loading and unloading are efficient and easy to handle, saving both time and physical effort. Ideally suited for use in forestry and construction sites, the RR500DHKAHR meets the highest demands in terms of performance and reliability. SCHORR Raupendumper RR500DHKAHR – Key Features: -- 9.2 HP 4-stroke engine -- Self-propelled & powerful crawler drive -- 500 kg payload -- Large, stable timber cradle with optimal tipping angle for efficient unloading -- Folding operator’s platform as standard -- 6+2 gear transmission Technical Data: Manufacturer (code): SCHORR Dkjdpevfp Dwofx Aflsg Manufacturer model code: RR500 Model: DHKAHR Payload: 500 kg Tipper drive: Hydraulic (stepless) Drive: Crawler Weight: 328 kg Drive Engine: Air-cooled single-cylinder 4-stroke engine (OHV) Starter: Recoil starter Output: 9.2 HP Transmission: 6 forward / 2 reverse gears Speed Forward: up to 8 km/h Reverse: up to 5 km/h Fluids Fuel tank capacity: 6 L (Unleaded petrol) Hydraulic oil tank capacity: 3 L (ISO VG 32) Gear oil tank capacity: 1.5 L (SAE 80W-90) Engine oil capacity: 0.9 L (15W-40) Max. hydraulic oil flow rate: 9 L/min Basic Dimensions Total platform length (folded): 1,720 mm Total platform length (unfolded): 1,920 mm Overall width with cradle (unfolded): 1,250 mm Overall width with cradle (folded): 865 mm Cradle/platform length: 965 mm Cradle inside width, top: 1,175 mm Cradle inside width, bottom: 775 mm Internal gap, cradle-to-cradle: 370 mm Overall height (handle to ground): 1,050 mm Overall height (cradle to ground): 900 mm Cradle height: 460 mm Cradle dimensions (external) L x W x H: 965 mm x 1,250 mm x 460 mm Cradle thickness: 40 mm Track size: 180 x 60 x 38 mm Ground clearance: 120 mm *Additional technical data available upon request. The RR500DHKAHR tracked dumper is the perfect solution for transporting materials such as timber, pipes, or bulk goods, especially on difficult terrain. Its compact design and crawler drive offer maximum maneuverability, even in confined or hard-to-reach areas.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1971, Parallel lathe Brand: SAFOP Model: LEONARD 1500 Year: 1971 Dkedew Az Hdepfx Aflsg Specifications: Maximum swing over bed (4-guideway bed): 2,200 mm Maximum swing over carriage: 2,000 mm Maximum turning length: 10,000 mm Maximum load between centers (without steady rest): 15,000 kg Spindle speeds (4 ranges): 1-100 rpm Tailstock quill diameter: 190 mm Quill stroke: 310 mm Spindle motor power: 40 HP Equipped with: 4-jaw chuck dia. 2,000 mm 3 roller steady rests