Omal Insert Nivo 3

Omal Insert Livello 3

Stanje: zelo dobro (rabljeno), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety cabin for the working head. Full machine safety enclosure Infeed table (workpiece support). Outfeed table (with conveyor belt) Workpiece feed using 3 conveyor belts (feed speed approx. max 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinet. Total installed power (kW): 99 No. 2 WORKING UNITS (TOP) – (SERVO MOTOR X-Y-Z): Iodpfx Aqsgwbbqoueih No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 glue injection nozzles and dowel insertion units (right side) No. 8 glue injection nozzles and dowel insertion units (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONS: BARCODE (WIRELESS SCANNER)

Leto izdelave: 2010, stanje: dober (rabljeno), USED CNC BIESSE BREMA EKO 902 INSERT TECHNICAL DETAILS: 3-AXIS (X-Y-Z) CNC MACHINING CENTER - Full protection of the operating head and the working area on the machine - Numerical control (CNC) with BIESSE Works software on Windows - Vertical panel positioning with 2 panel clamping vices - Panel feed (in the X-axis direction, on the lower support with rubber rollers), movement of clamping vices (in X-axis) for panel/workpiece fixing WORKPIECE DIMENSIONS (WORKING RANGE): - Length Min 160 mm / Max 3200 mm - Width Min 35 mm / Max 900 mm - Thickness Min 8 mm / Max 80 mm WORKING UNITS: - No. 1 vertical spindle (electrospindle) ER32 (4.5 KW) with inverter (up to 18000 RPM) - No. 1 circular saw (for grooves), 120 mm diameter (fixed on X-axis) - No. 13 independent vertical drilling spindles (6 on X-axis + 7 on Y-axis) - No. 8 independent horizontal drilling spindles (3+3 on X-axis and 1+1 on Y-axis) - No. 1 drilling head for hinge boring - Total installed power: 20 KW AUTOMATIC DOWEL INSERTION UNIT ON BOTH SIDES WITH PRESSURE PUMP FOR GLUE APPLICATION. Iisdpshknbrofx Aqueh

Stanje: novo, Leto izdelave: 2026, CNC stroj za vrtanje in vstavljanje moznic za popolnoma avtomatsko vrtanje, lepljenje in vstavljanje moznic. Center za vrtanje in obdelavo moznic s kompaktnostjo, učinkovitostjo, kakovostjo in prilagodljivostjo. Iiedpfx Asdx Axfeqush Kratek opis: • Univerzalni CNC krmiljen stroj za vrtanje in vstavljanje moznic • Nadzor brizganja lepila prek GIC • Zaprt sistem za lepilo • Primeren za obdelavo plošč in masivnega lesa • Opcijsko dodatna horizontalna in vertikalna vrtalna vretena • Razbremeni CNC obdelovalne centre • Optimalna dopolnitev strojem za razrez po gnezdenju

Stanje: zelo dobro (rabljeno), Panel dividing saw angular system Control: OSI Plus - Optiplanning software No. 2 powered roller conveyors, each approx. 4500 x 2200 mm Iisdpfsukhd Asx Aqujh Lifting table (mm): 4500 x 2200 1st pusher saw with grippers (qty): 5 Rotating device (for panels) up to 90° 1st panel dividing saw max. cutting width (mm): 4500 Max. saw blade projection (mm): 152 Scoring saw (max. saw diameter): approx. 215 mm Main saw (max. saw diameter / power): 530 mm (30 kW) Variable saw carriage feed rate (m/min): 1 - 170 Waste cutting shear 2nd pusher saw with grippers (qty): 10 2nd panel dividing saw max. cutting width (mm): 2200 Max. saw blade projection (mm): 152 Scoring saw (max. saw diameter): approx. 215 mm Main saw (max. saw diameter / power): 530 mm (30 kW) Variable saw carriage feed rate (m/min): 1 - 170 No. 2 front air flotation tables (mm 2200 x 1500) Automatic unloading bridge for cut panels "RBO (BIESSE)" Model Lifter with 6 stacking positions

Stanje: rabljeno, Leto izdelave: 2018, 1 piece CNC-CONTROLLED BORING, GLUING, AND DOWEL INSERTION MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro), 400V, 3Ph, 50Hz, complete in standard configuration with: - Carriage with linear guide, consisting of: - 1 pc. single-spindle horizontal boring unit, motor 1.1 kW, selectable spindle speed via operator software (3000/5000/8000 rpm) - 1 pc. exhaust, gluing, and dowel insertion station in reinforced design for dowels Ø 8 mm, dowel length 30 mm - Fully automatic, electronically controlled central lubrication system - X-axis NC controlled, with working length of 1300 mm, maximum traverse speed 78 m/min - Z-axis, position via table support programmable from 5–40 mm, option for NC-controlled Z-axis Iiodpjxwaz Hofx Aqush - Programmable dowel projection depth from 7–20 mm, option for NC-controlled Y-axis - Drilling depth from 0–35 mm (with drill bit length 70 mm) is set automatically with dowel projection - Closed gluing system with 6 bar glue pressure via glue nozzle, suitable for adhesives with viscosity of 150 to 350 mPas - Infinitely variable glue quantity control via operator software - Selector switch GLUE/WATER for flushing the glue system; each with 1 stainless steel tank for 5 kg glue and 5 l water - Indicator light for glue residual level in glue container - 1 pc. left, 1 pc. right, and 1 pc. central side stop (all removable) - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic angled clamping cylinders 10° for workpiece thickness up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm - 1 pc. TCT control with: - Integrated industrial PC, inkl. Soft PLC Beckhoff TWINCAT, operating temperature range 0–50°C, TFT industry display 15" resistive touch, 1024 x 768 resolution, CPU 2 GHz, 256 MB RAM, 2x network adapters, IDE hard drive, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - Programming via menu-guided user software, freely programmable drilling distances with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and process optimization, 4 work areas assignable with different programs, graphical workpiece representation, parametric programming, zero-point shift, programmable work lists, error diagnosis in plain text OPTIONS: - 1 electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle - 4 additional vertical angled clamping cylinders 10° with holders (total 8 clamping cylinders) - Surcharge for machine bed length 1800 mm with working length 1800 mm - Surcharge for: 1 horizontal drilling unit, 1.5 kW motor, with multi-spindle boring head with 3 individually selectable drilling spindles, 32 mm pitch along X-axis, spindle speed 3000 rpm (standard working length not reduced) - 1 NC-controlled Y-axis, with ball screw and dynamic traverse speed 300 mm/sec. Programmable via software: dowel projection 7–30 mm and drilling depth 0–42 mm (with drill bit length 77 mm) for vertical drilling unit from ABOVE; Y-axis position 5–42 mm - Surcharge for NC-controlled Y-axis, position 5–62 mm instead of 5–42 mm - Surcharge for: 1 vertical drilling unit from ABOVE, 1.5 kW motor, with multi-spindle boring head with 3 individually selectable drilling spindles, 32 mm pitch along X-axis, spindle speed 3000 rpm, Y-axis position 5–42 mm, workpiece length (Y) min. 130 mm (standard working length not reduced) - 1 NC-controlled Z-axis, with K...

Leto izdelave: 2001, stanje: rabljeno, • Heating plate size (mm): approx. 1500 x 2700 • Max. usable area (mm): 1250 x 2450 Ijdpfx Aekt N Huequjih • Loading side (mm): 1500

Stanje: novo, Leto izdelave: 2026, CNC avtomatski stroj za vrtanje in vtikanje moznikov za popolnoma avtomatsko vrtanje, lepljenje in vtikanje moznikov. Vrtalno in moznizno obdelovalni center s kompaktnostjo, učinkovitostjo, kakovostjo in prilagodljivostjo. Kratek opis: • Univerzalni CNC upravljani stroj za vrtanje in vtikanje moznikov Iiodpfx Aqsdx R Dfsueh • Nadzor izstreljevanja lepila preko GIC • Zaprt lepilni sistem • Primeren za obdelavo plošč in masivnega lesa • Opcijsko dodatne horizontalne in vertikalne vrtalne vretena • Razi razbremeni CNC obdelovalne centre • Optimalna dopolnitev za stroje za gnezdenje

Stanje: rabljeno, številka stroja/vozila: 008005, Maksimalna obdelovalna širina: 2440 mm Iiedpfx Aqowu Aacjujh

Stanje: rabljeno, Leto izdelave: 2009, Numerical Control POWER CONTROL PC 22 Machine suitable for the first and second panel pass Mobile motorized shoulder opening via NC, 3000 mm Maximum panel height: 60 mm PVC-ABS edge thickness: 3 mm Feed speed: 40 m/min Feed speed with corner rounding: 20 m/min Isdpfx Aopp Tkfsqueih Motorized rubber pressure belt Support rail with retractable pin (distance between pins: 500 mm) Squaring section consisting of: Non-stick unit Time-controlled automatic chip guard unit Double trimming unit Space reserved for future group extensions Gluing unit with pre-melter and glue pot Automatic adjustment of pressure rollers for edging Edge holder magazine with 2 positions Trimming unit with two motors Overlapping cut-off unit Corner rounding group (FK) Scraper unit for edges Glue scraper unit Buffing unit Non-stick unit

Stanje: novo, Leto izdelave: 2025, CNC-controlled boring, gluing, and dowel inserting machine fully equipped in standard configuration with: - Support with linear guide, consisting of: 1 pc. single-spindle horizontal drilling unit, motor 0.65 kW, stroke 70 mm Tool rotation speed selectable via operator software (3000/5000/8000 rpm) 1 pc. blowing, gluing, and dowel insertion station for dowels ø 8 mm, dowel length 25-50 mm - Fully automatic electronic central lubrication system - X-axis CNC controlled, working length 700 mm, maximum traversing speed 95 m/min - Z-axis adjustable manually via mechanical digital counter, position over support table 5-40 mm - Dowel insertion projection adjustable from 7-20 mm via mechanical digital counter, drilling depth from 0-35 mm (with drill length GL 70 mm) automatically set with projection - Closed glue system with 6 bar glue pressure via glue nozzle, for adhesives with a viscosity of 150 to 350 mPas - Glue quantity infinitely adjustable via operator software - Selector switch GLUE/WATER for flushing the glue system with: 1 stainless steel container for 7.5 kg glue and 7.5 l water Iiedpow Sgm Hsfx Aqujh - Indicator lamp for remaining glue level in the glue tank - 1 left side stop, 1 right side stop (both removable) - 2 start buttons for individual operation with 1-2 workpieces - 2 pneumatic angular clamping cylinders 10° for workpiece thickness up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 extraction funnel, connection ø 80 mm - 1 TCT control with: Built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" capacitive touchscreen, operating system: WINDOWS 10 IoT LTSC (long term support channel) - Programming via user-friendly menu software, freely programmable drilling distances with ABSOLUTE, RELATIVE, or GRID measurement, automatic workpiece mirroring and process optimization, 2 work areas assignable with different programs, graphic workpiece representation, parametric programming, zero-point displacement, programmable work lists, plain-text error diagnostics - Integrated options: - Electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle Art.no. 0470-0810 - 1 EASY CLEAN system for automatic test glue shots before starting the drilling/gluing/dowel inserting work program. E.C.S. for 1 glue nozzle Art.no. 0471-Z010 - 1 single-spindle vertical drilling unit, top drilling, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjustable via mechanical digital counter Adjustable from 5-40 mm, drilling depth (Z) max. 30 mm (with drill length GL 57 mm) Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation e.g. for Häfele Minifix) Art.no. 0471-0830 - 4 additional vertical angular clamping cylinders 10° with bracket, Art.no. 0470-0850 Available: at short notice