Center CNC za struženje in rezkanje

OKUMA MacTurn 50

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0014, stružna dolžina: 1.500 mm, premer struženja nad prečnim suportom: 610 mm, potovalna razdalja osi X: 598 mm, pomik osi Y: 230 mm, pomik po osi Z: 1.660 mm, TECHNICAL DETAILS Travel Distances Travel X-axis: 598 mm Travel Y-axis: 230 mm Travel Z-axis: 1,660 mm C-axis: 0.001° Turning Length: 1,500 mm Turning Diameter over Cross Slide: 610 mm Turning Diameter: 580 mm Spindle Spindle Motor Power: 30,000 W Spindle Speed (min): 14 rpm Spindle Speed (max): 3,200 rpm Spindle Bore: 90 mm Spindle Bearing Diameter: 130 mm Spindle Nose: JIS A2-11 Rapid Traverse Rapid Traverse Z-axis: 20 m/min Rapid Traverse X/Y: 12,000 mm/min Rapid Traverse C: 100 min^-1 Feed Rate X/Z/Y: 0.001 - 1,000 mm/rev Tools Tool Magazine Positions: 32 pos. Tool Holder: MAS BT 50 Max. Tool Diameter: 170 mm Max. Tool Length: 350 mm Max. Tool Weight: 20 kg Turret Type: H2 ATC Tool Stations: 2 (1× L-Tool / 1× M-Tool) Driven Tool Stations: stepless Spindle Speed – Driven Tool Stations: 40 – 3,000 rpm Gsdpjxqyiksfx Afqeil Tailstock Quill Diameter: 120 mm Quill Stroke: 170 mm Morse Taper: MK 5 MACHINE DETAILS CNC Control: OSP 7000L Total Connected Load: 53 kVA Dimensions & Weight Dimensions (L x W x H): 5.3 × 3.2 × 3.0 m Machine Weight: 18,500 kg EQUIPMENT Chip conveyor

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 5 MILLING SPINDLE - Tool holder: HSK63 - Spindle drive power: 17.5 kW - Spindle speed: 18,000 rpm LINEAR AXES - Travel X/Y/Z axes: 915 / 500 / 500 mm Godpfx Afsup Hw Eeqoil - Rapid traverse speed (X/Y/Z): 30 / 30 / 20 m/min TOOL CHANGER - Number of tools in magazine: 28 TABLE - Table size: Ø 630 mm - Max. table load: 500 kg ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power requirement: 26 kVA WEIGHT AND DIMENSIONS - Space requirements: 3620 x 3160 mm - Machine height: 3000 mm - Machine weight: 7,300 kg MACHINE HOURS - Operating hours: 48,894 h ACCESSORIES - Control: Heidenhain iTNC 530 - Coolant tank - Chip conveyor - Oil mist extractor: ELBARON - Coolant unit: HYDRAC COOLING FLKS 170S/2.3W/TP/400-50/1/14 - Workpiece probe system: Renishaw - Tool breakage monitoring: BLUM

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0082, stružna dolžina: 1.500 mm, premer struženja: 580 mm, potovalna razdalja osi X: 598 mm, pomik osi Y: 230 mm, pomik po osi Z: 1.660 mm, TECHNICAL DETAILS Maximum turning diameter: 580 mm Turning length: 1,500 mm Swing diameter over bed: 610 mm Swing diameter over cross slide: 580 mm Travel paths X-axis travel: 598 mm Y-axis travel: 230 mm Z-axis travel: 1,660 mm Main spindle Speed range – main spindle: 12 – 2,800 rpm Spindle bearing diameter: 150 mm Spindle bore: 110 mm Godpfx Aexb Awfsfqeil Spindle nose: JIS A2-11 Main spindle drive power: 37 (30) kW C-axis: 0.001° Feeds Rapid traverse X / Y: 12,000 mm/min Rapid traverse Z: 20,000 mm/min Rapid traverse C: 100 min⁻¹ Cutting feed rate X / Z / Y: 0.001 – 1,000 mm/rev Tool turret Type: H2 ATC Number of tool stations: 2 (1x L-Tool / 1x M-Tool) Driven stations: stepless Speed range – driven tool stations: 40 – 3,000 rpm Tool shank height: 25 mm Boring bar diameter: 50 mm Tailstock Quill diameter: 120 mm Quill stroke: 170 mm Tailstock taper: MT 5 Tool magazine Number of tool stations: 50 Tool holder: MAS BT 50 Max. tool diameter: 170 mm Max. tool length: 350 mm Max. tool weight: 20 kg Magazine drive: 3.2 kW MACHINE DETAILS Control unit: OSP 7000 L Space and weight Required space approx.: 6.0 x 3.2 x 3.0 m Machine weight approx.: 18.5 t Electrical data Total power requirement: 53 kVA Rated voltage: 400 V Number of phases: 3 Ph Frequency: 50 Hz EQUIPMENT Chip conveyor Central coolant system High-pressure coolant Signal lamp Hydraulic unit Steady rest 3-jaw chuck Schunk – ROTA NC 400-120 Electronic handwheel 44 assorted tool holders

Leto izdelave: 1999, Stanje: dober (rabljeno), Swing diameter 580 mm Turning length 1,500 mm X/Z travel 568/1,660 mm Y-axis C-axis Godpfjiicllox Afqoil Spindle speed 3,200 rpm Driven tools 3,000 rpm

Stanje: dober (rabljeno), Leto izdelave: 2008, 1 rabljeni vertikalni obdelovalni center Proizvajalec: Deckel Maho Tip: DMU 80 monoblock Leto izdelave: 2008 Krmiljenje: ITNC 530 Tehnične podrobnosti X-hod: 980 mm Y-hod: 630 mm Giodpjxa Eudjfx Afqol Z-hod: 630 mm Krmiljenje: iTNC 530 Skupna moč: 10 / 15 kW Teža stroja pribl.: 9,5 t Dimenzije pribl.: 4 x 4 x 2,5 m Dodatne informacije Oprema: Elektronsko ročno kolo Način delovanja 4 Ročna zasučna glava za rezkanje Motorsko vreteno 12.000 min-1 SK 40 / Vpenjanje DIN 69872 32-pozicijski zalogovnik orodij Fiksna miza 1250 x 700 mm Transporter ostružkov Naprava za hlajenje

Stanje: rabljeno, Leto izdelave: 2005, X-axis travel: 1,000 mm Y-axis travel: 1,000 mm Z-axis travel: 1,000 mm Control: Siemens 840 D Spindle speed range – main spindle: 20 – 18,000 rpm Drive power – main spindle: 28 / 19 kW Max. torque: 121 Nm Tool holder: HSK-A63 Swiveling B-axis: -30 / +180° Swivel time: 1.2 s Number of pallets: 2 Pallet size: 1,000 x 800 mm Max. workpiece weight: 1,500 kg Rotary C-axis: 360° Number of tool stations: 180 positions Tool holder: HSK-A63 Total power requirement: 78 kVA Machine weight approx.: 27.0 t Space requirements approx.: 8.0 x 7.0 x 3.4 m 5-axis CNC universal machining center DECKEL MAHO – DMC 100 U duoBLOCK - Swiveling milling head (B axis) - NC rotary table (C axis) - Pallet changer - 180-position tool magazine Gsdswf Rgfepfx Afqeil - WITHOUT zero-point clamping system - WITHOUT RINGLER extraction system - WITHOUT tools

Stanje: rabljeno, Leto izdelave: 2007, Maximalni prečnik struganja 42 / 140 mm Dužina struganja 170 mm Gjdpfsvyli Eex Afqeil Upravljač Mitsubishi Meldas Obrtaji vretena 80–8.000 o/min C-osovina 0,001° Revolverska glava (x-puta) 2x 12 (VDI 20) pogonjena Obrtaji revolverske glave 45–4.500 o/min Snaga vretena 1 kW Abgreif stanica 42 mm Obrtaji 60–6.000 o/min C-osovina 0,001° Broj upravljanih osa 8 Uređaj za stezanje steznih čaura 48 DIN 6343 Radni sati 10.769 h Transporter strugotine da/godina 2018 Ukupna snaga 7,5 / 11 kW Težina mašine cca. 3,3 t Dimenzije cca. 2,4 x 1,6 x 2,2 m CNC strugarsko-glodalica CITIZEN BOLEY BE 42, godina 2007 Simultani rad sa 7 osa na glavnom i prihvatnom vretenu Vrlo dobro stanje, radni sati 21.999 h (septembar 2024) Oprema: # razni nosači alata: 5x aksijalni pogonjeni nosač alata # stezno telo za stezne čaure, tip 173E # dodatni rashladni uređaj # transporter strugotine Knoll, godina proizvodnje 2018 Boley BE 42 se prodaje bez automatskog magazina za šipke. Interfejs za povezivanje postoji. Zamena kompletnog seta baterija izvršena 22.12.2025.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.134 mm, pomik osi Y: 1.016 mm, pomik po osi Z: 762 mm, model krmilnika: HASS, širina mize: 914 mm, dolžina mize: 2.134 mm, obremenitev mize: 1.800 kg, skupna masa: 11.340 kg, hitrost vretena (min.): 40 obr/min, največja hitrost vretena: 7.500 obr/min, dovod hladilne tekočine: 15 letvica, razdalja od središča mize do nosu vretena: 864 mm, moč vretenovega motorja: 22 W, nos vretena: ISO 40, število mest v zalogovniku orodij: 40, dolžina orodja: 406 mm, premer orodja: 63 mm, teža orodja: 5.500 g, vhodna napetost: 400 V, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Used vertical machining center with HAAS CNC Gsdpfowrfamox Afqjil

Stanje: dober (rabljeno), Leto izdelave: 2000, obratovalne ure: 10.000 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.105 mm, premer struženja: 610 mm, največja hitrost vretena: 3.500 obr/min, izvrtina vretena: 70 mm, potovalna razdalja osi X: 580 mm, pomik osi Y: 210 mm, pomik po osi Z: 1.137 mm, montažni premer: 63 mm, največja hitrost vrtenja: 6.000 obr/min, vrsta vhodnega toka: Klimatska naprava, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, The machine is in good condition. Major maintenance work in recent years: - 30.04.2020 Spindle overhaul CHF 35,000 - 16.07.2021 Software update (Wenk AG) CHF 1,600 - 20.06.2022 Central lubrication pump replaced CHF 400 (All prices are in CHF) Known defects: - Error message during startup - Coolant leaks out at the rear side of the milling spindle when internal cooling is activated - Overload message when the machine is cold and running at 100% rapid traverse - Over 150 various tool holders - Spare bushings for tool magazine - Spare limit switches for tool changer position monitoring - 2 pcs 3-jaw chucks, diameter 250 mm (installed during inspection) - 1 pc 3-jaw chuck, diameter 250 mm - 1 pc 3-jaw chuck, diameter 300 mm - 1 pc 4-jaw chuck, diameter 400 mm Godexp Hmaepfx Afqsil - 2 sets of hard jaws for external clamping, short version - 1 set of hard jaws for external clamping, long version - Several sets of used soft jaws - Spare filters for high-pressure system Kowap (5 pcs in stock, approx. 2 available at delivery—1 filter approx. CHF 20–25) - Coolant purification system or oil separator (custom-built) - Cabinet adapted to the tool magazine for KM63 holders, numbered with 80 slots - Specific clamping devices suitable for KM63 holders, providing direct clamping for indexable inserts - Iscar slot cutter suitable for a holder, D160 mm, width 4 mm - Gear milling cutter suitable for a holder (custom-built, for soft jaws p=1.5 mm) - Cleaning/deburring brush suitable for a holder We are happy to provide you with leasing and financing options for the machine. A viewing appointment can be arranged by mutual agreement.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, višina središča: 150 mm, skupna dolžina: 620 mm, Mechanics: All wear parts of the machine are replaced, including the infeed spindle on the X-axis. All assemblies are refurbished to a like-new condition. After overhaul, the machine is comparable to a new machine. Geometry: The machine is completely disassembled down to the guideways. Before the geometry of the individual tables and assemblies can be restored, both the X- and Z-axis guideways are hand-scraped and brought to a like-new condition. Upon completion, the machine receives a measurement protocol in accordance with the manufacturer’s specifications. Gsdpourw Uyofx Afqsil Painting: After restoring the machine’s geometry, it is prepared for repainting. All covers, tables, and the machine bed are stripped of old paint, cleaned, and newly painted. Hydraulics: The entire lubrication system, including the lubrication unit, is replaced. The hydraulic unit is also completely overhauled. Conventional Internal Cylindrical Grinding Machine TSCHUDIN HTG 610I Machine Equipment: Technical Data: Centre height: 150 mm Centre distance: 680 mm Grinding length: 620 mm Machine weight and footprint: 2,500 kg // 2,340 x 1,445 x 1,900 mm Standard machine equipment: 1 pc. workpiece spindle headstock MK5 1 pc. operator panel 1 pc. mount for internal grinding spindle 1 pc. speed controller for belt spindle (UJ50 / UJ80) FISCHER 1 pc. hydraulic unit Optional: • 2-axis digital measuring system • Freely adjustable speed (1–800 rpm) incl. soft start (higher speeds available upon clarification of technical details) • Separate low-speed setting for part alignment