Stroj za površinsko brušenje, stroj za brušenje

Okamoto ACC-12.24DX mit Magnetaufspannung

Stanje: dober (rabljeno), Leto izdelave: 2018, Miza 1473 x 305 mm, pomiki XYZ: 1000 x 410 x 400 mm (kolenski tip), hodi pinole 127 mm, stožec vretena ISO40, avtomatski izvlečni vijak, motor vretena 5 KM, hitrosti vretena 70 - 3600 vrt/min, CNC upravljanje Prototrak SMX, Rsdpoxftqdefx Abhjn

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Rodpfx Aow Ucyusbhsn Type of machining: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table dimensions: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L X, Y, Z, U and V axes Travel X, Y, Z: 550 x 350 x 400 mm Travel U, V: 550 x 350 mm Collision protection: X, Y, U, V, Z axes Taper cutting, max. angle: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options 0.1/0.2/0.3 mm) Wire guide type: closed diamond, no gap Available spool weight and type (DIN standard): 1.6 kg (K 100) to 8 (K 160) Available spool weight and type (JIS standard): 3 (P3) to 5 (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum achievable surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measuring resolution: 0.5 micron Servomotors: AC type All technical data is given without obligation and subject to errors or omissions.

Stanje: rabljeno, Leto izdelave: 2009, Offered here is a used machining centre from the manufacturer Deckel Maho DMG. The machine is under power and can be inspected at our facility. Ex works, loaded on truck Manufacturer: DMG Deckel Maho Model: DMC 125 H duoBlock Year of manufacture: 2009 Rjdpow Ew T Sefx Abhsn Control: Siemens 840 D Solutionline (PCU 50) Technical data: Travel X, Y, Z axes: 1250 x 1000 x 1000 mm Feed rate X, Y, Z axes: 20 - 60,000 mm/min Rapid traverse X, Y, Z axes: 60 m/min B-Axis travel: 360 x 0.001° B-Axis feed rate: 10,800°/min Max. table rotation speed: 30 rpm Spindle speed: 20 - 8,000 rpm Gear ranges: 2 Max. workpiece diameter: 1,250 mm Max. workpiece height: 1,580 mm Clamping area: 800 x 800 mm Max. workpiece weight: 1,500 kg Pallet weight: 570 kg Max. permissible weight difference for pallet loading: 1,000 kg Tool holder: SK 50 according to DIN 69871 Maximum tool length: 650 mm Tool magazine: 120 positions Transport dimensions: 6,500 x 3,000 x 3,200 mm Transport weight of the machine (without magazine or other accessories): approx. 20,000 kg Required space: approx. 7,000 x 6,000 mm Total weight of the machine: 24,000 kg Accessories: - Chip conveyor with coolant tank - Coolant system - 4x machine pallets - Tool magazine - Oil mist extraction - Various new spare parts: 1x Y-axis length measuring system (new) 1x lubrication unit 230V 0.12 30bar (new) 1x gear unit P-AGG*MKF1-KW2-20036 (new) 1x Cyclo gearbox F1C-A25 (new) 1x retrofit kit power module (new) 1x lifting devices for the machine

Stanje: dober (rabljeno), Leto izdelave: 2001, dolžina brušenja: 650 mm, širina brušenja: 525 mm, skupna višina: 350 mm, dolžina mize: 600 mm, širina mize: 350 mm, Manufacturer: Geibel & Hotz Model: FS 635-Z SA Control: Digital readout Year of manufacture: 2001 Magnetic table 600 x 350 mm Enclosed housing for CE compliance Vertical automatic feed (SA) Automatic lubrication Coolant tank Specifications Metric / US Standard X-axis 650 mm Y-axis 525 mm Z-axis 350 mm Table length 600 mm Table width 350 mm Table load capacity 400 kg Feed rate X-axis 35,000 mm/min Feed rate Z-axis Rodpfevdal Asx Abhon 1,000 mm/min Grinding wheel size 300 x 50 x 76.2 mm Power 3.7 kW Speed 2,800 rpm Dimensions (approximate) Length 3,200 mm Width 2,000 mm Height 2,870 mm Weight 2,300 kg Please note: The information on this page has been compiled to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Therefore, it does not constitute representation or contractual terms. We recommend verifying all important details.

Stanje: dober (rabljeno), Leto izdelave: 2008, dolžina brušenja: 1.250 mm, dolžina mize: 1.250 mm, obremenitev mize: 1.200 kg, širina mize: 500 mm, največja hitrost vretena: 2.600 obr/min, hitrost vretena (min.): 1.000 obr/min, skupna masa: 9.300 kg, potovalna razdalja osi X: 1.400 mm, pomik osi Y: 600 mm, pomik po osi Z: 600 mm, moč: 185 kW (251,53 KM), vhodna napetost: 400 V, potrebna višina: 2.870 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, X-axis: Grinding length 1,250 mm, travel 1,400 mm Y-axis: Distance table to spindle center 700 mm, travel 600 mm Z-axis: Grinding width see note, travel 600 mm Note: The grinding area in the cross direction (Z-axis) depends on the travel distance and the grinding wheel width. Example: Cross travel = 600 mm Rsdpfxou Hiq Rs Abhjn Grinding wheel width 60 mm = grinding width 660 mm Grinding wheel width 100 mm = grinding width 700 mm See images for more technical data

Stanje: rabljeno, Leto izdelave: 1988, Krmiljenje Grundig x-hod 700 mm y-hod 500 mm z-hod 400 mm Teža stroja cca 2,8 t Rjdpfx Abeiqu S Eohsn +++++ Upoštevajte, da je stroj demontiran in pripravljen za nakladanje. Zaradi tega demonstracija pod napetostjo ali izdelava videoposnetka ni mogoča. Naš oglas vsebuje tudi najbolj informativne fotografije v najboljši možni kakovosti. Pošiljanje dodatnih fotografij žal ni mogoče. +++++

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Razdalja med vreteni 800 mm, Y-os (+/-105 mm), C-os 0,001 stopinje, B-os -30/+210 stopinj, glavna hitrost vretena 5.000 min⁻¹, hitrost sekundarnega vretena 6.000 min⁻¹, hitrost rezkanja 12.000 min⁻¹, kapaciteta palice 65 mm, ATC s 38 mesti, moč vretena 22/18,5 kW, krmilje Siemens 840D, merilec orodja, hlajenje skozi vreteno, Rjdpfx Abow Nwfbehsn magazinski podajalnik palic, robotski nakladalnik.

Stanje: dober (rabljeno), Leto izdelave: 1988, Operating voltage: 380 V Connected load: 7.5 kVA Dimensions: 2725 x 1930 x 1773 mm Machine weight approx. 2500 kg Technical Data – Main Specifications: - Table surface: 605 x 300 mm - Max. table longitudinal travel (manual): 750 mm - Table cross travel: 340 mm - Grinding height between table and new grinding wheel min./max.: 22.5 / 322.5 mm - Standard size of magnetic chuck: 600 x 300 mm - Workpiece weight incl. magnet: 420 kg X axis / Longitudinal travel: - T-slots (number x width): 3 x 17 mm - Table feed, hydraulic: 0.3 – 25 m/min - Travel per handwheel revolution: 47 mm Y axis / Vertical travel: - Automatic vertical feed – Coarse, 12 steps: 0.001 – 0.03 mm - Automatic vertical feed – Fine, 8 steps: 0.001 – 0.01 mm - Travel per handwheel revolution (x1/x10): 0.1 / 1.0 mm - Dial graduation on handwheel (x1/x10): 0.001 / 0.1 mm - Spark-out strokes: 0 – 5 - Rapid traverse: 400 mm/min Z axis / Cross travel: - Automatic cross feed, intermittent: 0.5 – 20 mm - Automatic cross feed / rapid traverse, continuous: 0.1 – 1.0 m/min - Travel per handwheel revolution: 5.0 mm - Dial graduation on handwheel: 0.02 mm Standard grinding wheel: - Diameter x width: Ø 355x38 (50) mm - Bore: Ø 127 mm - Speed: 1500 min⁻¹ Rsdpfx Ajw Dvkajbhon Accessories: Various grinding wheels Documentation

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 5 MILLING SPINDLE - Tool holder: HSK63 - Spindle drive power: 17.5 kW - Spindle speed: 18,000 rpm LINEAR AXES - Travel X/Y/Z axes: 915 / 500 / 500 mm - Rapid traverse speed (X/Y/Z): 30 / 30 / 20 m/min Redpfsup Hwxsx Abhen TOOL CHANGER - Number of magazine tools: 28 TABLE - Table size: Ø 630 mm - Max. table load: 500 kg ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 26 kVA WEIGHT AND DIMENSIONS - Required space: 3620 x 3160 mm - Machine height: 3000 mm - Machine weight: 7300 kg MACHINE HOURS - Operating hours: 50223 h ACCESSORIES - Control: Heidenhain iTNC 530 - Coolant tank - Chip conveyor - Oil mist extraction: ELBARON - Coolant unit: HYDRAC COOLING FLKS 170S/2.3W/TP/400-50/1/14 - Workpiece probe system: Renishaw - Tool breakage monitoring: BLUM

Stanje: rabljeno, Leto izdelave: 1969, Grinding length: 500 mm Grinding width: 200 mm Workpiece height: 250 mm Total power requirement: 5.5 kW Rsdst Hwziepfx Abhon Machine weight approx.: 2,500 kg Required space approx.: m J U N G Horizontal Precision Surface and Profile Grinding Machine Model: HF 50 RD Year of manufacture: approx. 1969 Machine No.: 4082 Maximum grinding length: 500 mm Maximum grinding width: 200 mm Table size: 600 x 200 mm Table speed: 1 – 20 m/min Working height under grinding wheel: approx. 350 mm Grinding wheel dimensions: 225 x 25 x 51 mm Grinding wheel speed, stepless: 1,000 - 4,500 rpm Vertical infeed: 0.001 - 0.01 mm/stroke Grinding spindle drive, stepless: 0.5 to 1.5 kW Total drive: approx. 6 kW - 380 V – 50 Hz Weight: approx. 2,500 kg Accessories / Special Equipment: • This design is particularly suitable for grinding high-alloy tool steels, thanks to the stepless speed range. • Automatic infeed of the grinding slide for both surface and profile grinding tasks, with automatic infeed stop via dial gauge, plus dial indicator mount and dial gauge for height control. • Machine configurable for standard grinding method with and without infeed, with continuous cross feed or table reversal, or for plunge grinding without traverse. • Manual straight dresser mounted above the grinding wheel • Built-on permanent magnetic chuck approx. 400 x 200 mm, tiltable • Separate wet grinding unit with coolant tank and band filter • Separate converter cabinet for stepless speed regulation and cutting speed display • Approx. 3 flanges with and without grinding wheels, motorized rapid grinding head traverse Condition: Good – ready for demonstration under power, partially overhauled by professional company (piston rods, lubrication, infeed, dresser, bellows, etc.) Delivery: Ex-stock – as inspected Payment: Net – upon receipt of invoice