Dvostolpna stiskalnica - hidravlična

OEVERMANN VP 300 (UVV)

Stanje: zelo dobro (rabljeno), Hello, Gedpfx Aoitcq Tefqebg We are offering used Erowa PalletSetW vices. All items have been cleaned and tested by us. - ER-025895 Vice PalletSet W 40mm - ER-054922 Flat Vice 8mm PalletSet W - ER-055774 Vice 0-170mm Additionally, a full functionality check was performed. These vices show minor signs of use, but are in very good technical condition. Single unit purchase is also possible. Spare parts are available as well. If you have any questions, please do not hesitate to contact us.

Leto izdelave: 1992, Stanje: zelo dobro (rabljeno), Rabljena hidravlična stiskalnica tipa H, 700 ton, naprodaj Proizvajalec: Muller Kapaciteta (ton): 700 Število batov: 2 Mere mize (x-y/mm): 4000×2200 Mere drsnika (x-y/mm): 4000×2200 Hod (mm): 1400 Svetla višina v zgornjem položaju (mm): 1920 Godpohcfzksfx Afqjbg Moč nasprotnega pritiska (tona): 400 Hod nasprotnega pritiska (mm): 500

Stanje: novo, New hydraulic high-speed press from min. 300t up to max. 2500t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your requirements. Let us know your needs and we will prepare an attractive offer including installation and service. Over the past years, ISGEC has supplied to more than 26 countries, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh, and over 200 presses to 40 Japanese customers. We are proud to have been the official sales partner since 2020 and look forward to your enquiry. Gbsdpjf Rt Irofx Afqog

Leto izdelave: 2000, Stanje: dober (rabljeno), CNC Surface and Profile Grinding Machine Manufacturer: Ziersch & Baltrusch Model: PROFITLINE ZB 62 NC Year of manufacture: 2000 Grinding area: 600 x 270 mm Electromagnetic chuck with continuous crosswise pole division Dimensions: 600 x 200 mm, pole pitch = 4 mm Wet grinding system with automatic paper band filter, machine tray included. Gbjdpfx Aofrbckefqsg Complete machine documentation available.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, Control: Mazatrol M Plus Travel paths: x-1660 y-760 z-660 mm Clamping surface to spindle head: 155 – 815 mm Distance column to spindle center: 808 mm Gbjdovrxd Hepfx Afqeg Spindle taper: SK 40 Tool changer: 24 stations Spindle speed: 7,000 rpm Table working area: 2,000 x 760 mm Table load capacity: 1,000 kg Rapid traverse x, y-axis: 24,000 mm/min Rapid traverse z-axis: 20,000 mm/min Feed rate: 1 – 5,000 mm/min Machine weight: approx. 8,700 kg Including chip conveyor, coolant system The machine can be inspected under power.

Stanje: novo, Leto izdelave: 2024, Stroj za profiliranje kovinskih stebrov za vinograde se uporablja v vinogradih in sadovnjakih za proizvodnjo kolov in stebrov. Običajno so vinogradniški stebri debeline 1,5-2 mm. Proizvodna linija je sestavljena iz razvijalca (decoiler), servo podajalca-ravnalca, stiskalnice, orodja za vtiskovanje, stroja za profiliranje in giljotine. Gbedpfst Tcz Uex Afqeg

Stanje: rabljeno, Eccentric Pressing Machine HAULICK + ROOS Type RVD 125 Double-column Eccentric Press Machine No. 212560 Year of manufacture: 1981 Pressing force: 125 tons Table size: 880 x 800 mm Table opening: 470 x 140 mm Column width: 900 mm Column width (lateral): 415 mm Ram stroke: 45 mm Ram adjustment: 0-80 mm Die height as pictured: 340 mm Strokes per minute: 50 to 300 spm Main drive motor power: 22 kW Power supply: 380 Volt, 50 Hz Godpfx Aehlnzkofqsbg - Double-connecting rod mechanism with 4-point eccentric shaft bearing for off-center ram pressure loads - Separate electrical control cabinet - NC roller feeder EBU, width 250 mm, year of manufacture: 2003 - Separate operating console for roller feeder - Coil feed direction: left to right Space requirement (press) L x W x H: 3000 x 2000 x 3020 mm Transport height: 2950 mm Weight of press: approx. 11 tons

Stanje: dober (rabljeno), Leto izdelave: 2000, skupna višina: 47.000 mm, skupna širina: 27.000 mm, skupna dolžina: 25.000 mm, širina mize: 1.000 mm, dolžina mize: 1.800 mm, skupna masa: 43.000 kg, širina plošče bata: 600 mm, hod blazine orodja: 200 mm, Siemens Simatic OP 27 control system Gbsdpfx Afotiwgijqeg Sick light barrier Separate Rittal control cabinet Side walkways/access passages Floor-level installation

Stanje: rabljeno, Leto izdelave: 2003,

Stanje: rabljeno, Leto izdelave: 2004, Presskraft: 630 t Hub: 800 mm Ständerweite: 2.600 mm Gbedjv Svaropfx Afqog Abstand Tisch/Stößel (bei oberem, verstelltem Hubanschlag): 1.500 mm Tischfläche: 2.500 x 1.300 mm Ziehkissendruck (im Tisch): 300 t Ziehkissenhub (im Tisch): 300 mm Stößelfläche: 2.500 x 1.300 mm Seitlicher Ständerdurchgang: 1.040 mm Abwärtsgeschwindigkeit: ab 600 mm/sec Aufwärtshub-Geschwindigkeit: 360 mm/sec Arbeitsgeschwindigkeit: 14 – 42 mm/sec Antriebsleistung: 145,0 kW Maschinengewicht: 85,0 t Platzbedarf (BxTxH): 4,2 x 4,0 x 7,8 m Bauhöhe über Flur: 6,80 m Bauhöhe unter Flur: 1,0 m Vorführmaschine aus einer technischen Hochschule mit ca. 920 Betriebsstunden – neuwertiger Zustand! Für Handbeschickung gemäß CE-Norm zugelassen. Mit ölhydraulischem Antrieb, druck-, zeit- und wegabhängig steuerbar, oberer und unterer Hubbegrenzung, Lichtschranke (Sick) vorder- und rückseitig, hydraulischem Ziehkissen im Tisch inkl. Auswerferfunktion, hydraulischer Schnittschlagdämpfung, mechanischem Tiefenanschlag über 4 motorisch verstellbare Spindeln, hydraulischer Stößelverriegelung, Zweihandbedienung, 2 Werkzeugwechselkonsolen, 4 hydraulische Kugelrollenleisten im Tisch, 4 Schwingelemente. English translation: Press force: 630 t Stroke: 800 mm Upright clearance: 2,600 mm Distance table/ram, max. stroke up (adjusted): 1,500 mm Table size: 2,500 x 1,300 mm Cushion force in table: 300 t Cushion stroke in table: 300 mm Ram area: 2,500 x 1,300 mm Side frame pass opening: 1,040 mm Downward speed: from 600 mm/sec Upward speed: 360 mm/sec Working speed: 14 – 42 mm/sec Drive motor power: 145.0 kW Machine weight: 85.0 t Space requirements (W x D x H): 4.2 x 4.0 x 7.8 m Overall height above floor: 6.80 m Foundation pit depth below floor: 1.0 m Demonstration machine from a technical university with approx. 920 operating hours – as new condition! Approved for manual loading/unloading according to CE standards. Equipped with electro-hydraulic drive, pressure/time/position-dependent controls, upper and lower stroke limit, light barriers (Sick) front and rear, hydraulic die cushion in table incl. ejector function, hydraulic cutting shock absorber, mechanical depth stop via 4 motorised spindles, hydraulic ram locking, two-hand operation, 2 die change consoles, 4 hydraulic ball roller strips in the table, 4 vibration-damping elements.