Kovinski Gringing & rob zaokroževanja stroj

NS Maquinas OD120 + OD160

Stanje: novo, Model designation Rsdpfsgvqzcsx Ag Tsp Airtower FT 20,000

Stanje: rabljeno, Leto izdelave: 2007, Turning diameter 300 mm Swing diameter over bed 430 mm Rsdjwx R Rkjpfx Ag Tjp Swing diameter over cross slide 300 mm Control SIEMENS, SINUMERIK 840 D Travel path - X 160 mm Travel path - Z 510 mm Maximum workpiece length 480 mm Main spindle bore 53 mm Main spindle speed 0 - 7000 rpm Spindle nose DIN 55026 A2-5 Spindle torque 100 Nm Main spindle motor 15 kW Sub-spindle bore 53 mm Sub-spindle speed 0 - 7000 rpm Spindle nose DIN 55026 A2-5 Spindle torque 100 Nm Sub-spindle motor 15 kW C-axis resolution 0.001° C-axis rapid traverse 1000 rpm Tool turret 1 x 12 stations Number of driven tool stations 12 Tool holder shank (DIN 69880) VDI 25 Speed of driven tools 0 - 8000 rpm Torque 16 Nm Power 4 kW Feed force X/Z-axis 4000 / 6000 N Rapid traverse X-axis 24 m/min Rapid traverse Z-axis 30 m/min Total power requirement 38 kVA Machine weight approx. 4 t Machine dimensions L x W x H 2.65 x 1.84 x 2.32 m Accessories: Collet chuck 173 E on main spindle, Collet chuck 163 E on sub-spindle, Bar loader manufacturer FMB, type turbo 3-36/3200 A, Year 2018 for bar diameters up to 36 mm and bar lengths up to 3200 mm Various tool holders for turret (no driven holders), Coolant system

Stanje: novo, DM1100 2C – Edge Rounding Machine for Laser-cut, Plasma-cut, and Punched Parts NEW DESIGN – UNDER POWER FOR DEMONSTRATION – IMMEDIATELY AVAILABLE FROM STOCK The DM1100 2C rounds the upper and lower edges of metal parts from a minimum size of 150 mm up to a length of 1100 mm IN A SINGLE PASS. The first station processes the parts from below using two counter-rotating cross belts, while the second station processes the parts from above, also using two counter-rotating cross belts. The cross belts enable rounding of both the inner and outer edges of the workpieces. Sharp edges on steel, stainless steel, and aluminum parts produced by laser cutting, punching, or shearing are removed. Simultaneous processing of both sides of laser-cut or punched metal parts saves time and reduces production costs. Another advantage of the DM1100 2C is its ability to process small parts from 50 mm. By folding up a table, the rotation direction of the upper conveyor belt changes automatically, bridging the gap of the first processing station, so that parts go directly to the second station. This means that small products from 50 mm up to 150 mm can be processed on one side only. Rodpfsd Ev Upsx Ag Tsp A further benefit is that the machine can edge round parts with protective film without damaging the film. Easy and tool-free cross belt change. Program for automatic positioning of the upper and lower belts ensures good accessibility and shorter changeover times. Simple to operate via integrated touchscreen. This machine is also available with a return conveyor system. Technical Data: Working capacity (Ø mm): 1100 x 50 Number of cross-belt stations: 2 Cross-belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Cross-belt motor (kW): (4x) 3 Feed motor (kW): (3x) 0.18 Total power (kW): 13.1 Power consumption (A): 30 Extraction connection per head (Ø mm): 150 Dimensions (mm): 2560 x 1980 x 2150 Weight (kg): 2210

Stanje: rabljeno, Contact grinding wheel dimensions: 50 x 100 Ø mm Drive motor: 380 V, 0.7 kW Space requirement: 650 x 550 x 1050 mm Rodpfeb Tcv Hox Ag Tjp

Stanje: dober (rabljeno), The debarker is perfectly suited for debarking both hardwood and softwood logs. The carriage is made of a heavy-duty steel frame. Equipped with 5 pairs of drive wheels. The milling arm is also built from a heavy-duty steel construction. Rsdpfxjtuyr Ie Ag Tep Hydraulic milling head. 22 kW motor. The log infeed conveyor shown in the photos is not included in the offer and is available for an additional charge of 25,000 PLN / 5,500 EUR.

Stanje: novo, Leto izdelave: 2023, Tube drilling machine, angle drilling machine, automatic drilling unit TDM100, manual operation, equipped with one drilling head AVAILABLE IMMEDIATELY FROM STOCK + CAN BE INSPECTED UNDER POWER - Minimum quantity lubrication - Manual material clamping - Manual feed Rsdpfx Aslgvkiog Tjp - Maximum tube length 3,000mm (option: 6,000mm) - Positioning accuracy +/- 0.2mm - 10 stops (can be extended as required) - Manual loading and unloading of material - Drilling head swivels +/- 50° - Manual 360-degree tube swiveling device - Drilling unit power: 1 x 2.2 kW - Motor speed 295 - 2,950 rpm - Speed display on touch panel - Drilling unit lighting - Integrated tool cabinet - For round tubes up to 114mm - For square profiles up to 100 x 100mm - For flat material up to 100 x 15mm - For T-profiles up to 100 x 100 x 12mm - For L-profiles up to 100 x 100 x 8mm - For double posts up to 100 x 15mm - Flow drilling up to M12 - Drillings up to Ø 50mm

Leto izdelave: 2003, Stanje: rabljeno, Pressure: 100 t Stroke: 10–130 mm Strokes per minute: 30–90 spm Throat depth: 330 mm Ram adjustment: 100 mm Table area: 950 x 660 mm Ram area: 540 x 440 mm Through-hole in table: Ø 230 mm Table height: 1000 mm Pin hole in ram: Ø 50 mm Total power requirement: 7.5 kW Machine weight approx. 7 t Pneumatic clutch-brake combination Beutler Datatech press control Centralized oil lubrication Hydraulic overload protection in ram Rsdsra Rr Eepfx Ag Tjp Manual stroke adjustment Manual ram adjustment Two-hand operation Foot operation GSW feed straightener VRMA 40/78, year of manufacture 2003 Feed control HDS 50 BSA decoiler NO20/400V-AP

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2013, Elektrostatični zračni filter Indusa elstar EL4001 NVAS R/O Na voljo so še 3 kosi. Sesalni priklop je spodaj desno, izpust zraka zgoraj levo. Zračni filtri so iz let 2010–2013 in so bili zelo malo uporabljeni, saj je podjetje leta 2014 prešlo na centralni odsesovalni sistem. Vsi filtri so generalno obnovljeni, očiščeni in dezinficirani, z novim notranjim delom. Naprave so vizualno in tehnično v zelo dobrem stanju. Pred dobavo vse naprave 24 ur delujejo na testnem mestu. Premišljena konstrukcija, visoka kakovost izdelave in prilagodljiva serija so razlog za uspeh elektrostatične serije filtrov elstar. Elektrostatični zračni filter očisti izpušni zrak strojev tam, kjer nastaja – izpušni zrak postane ponovno primeren za dihanje! Elstar elektrofilter je namenjen ločevanju oljne megle, emulzijske megle, oljnega dima, varilskega dima, hlapov, lebdečih delcev, dima z oksidi in aerosolov. Tako je primeren za skoraj vsako industrijsko področje uporabe. Rsdpfxefyiqbe Ag Top

Stanje: novo, Saw blade diameter: 350 mm Cutting range at 90 degrees, round: 115 mm Cutting range at 90 degrees, square: 95 mm Cutting range at 90 degrees, rectangular: 180 x 95 mm Working height: 925 mm Saw blade speeds: 15 - 90 rpm Total power requirement: 3.0 kW Machine weight approx.: 0.68 t Space requirements approx.: 0.8 x 1.0 x 1.85 m Redpofg Rlcsfx Ag Top Electropneumatic, vertical, linear-guided automatic saw for use with HSS saw blades, designed for serial cuts from 60° left to 45° right on steel. The machine can also operate in semi-automatic mode. CNC automatic machine with multiprocessor and two axes controlled by the latest generation MEP controller, allowing the programming of up to 1000 different cutting programs—each with different cutting lengths and quantities—for the same material thickness.

Stanje: novo, Step-by-step coating systems Elboy Industrial Solutions designs and manufactures a wide range of paint shops tailored to your product requirements. With ELBOY, you can use virtual reality during the design phase to navigate your facility, allowing you to make necessary adjustments right from the start, avoiding unexpected results later on. We offer engineering and manufacturing services for various applications, with special focus on environmental protection and occupational safety across all processes, including sandblasting, filling, washing, priming, and topcoating for all product sizes. The 'Step by Step' systems are equipped with overhead conveyors or floor conveyors, and can be configured for any product size. Rodpfxjdy Dw Ae Ag Tsp Cabins for sandblasting, chemical washing, pre-coating, drying, filling, top coating, and curing can be seamlessly integrated into the system. To execute each process step-by-step as specified by the system, automatic doors open once the programmed cycle is complete, and the product proceeds automatically to the next process line. These fully automated systems are operated via a 15-inch touchscreen and offer comprehensive reporting options—including main computer monitoring, product reporting, results feedback as required, and remote control capabilities. Our paint shops are designed and built by our engineers to meet your capacity, application, and specific operational requirements. Whether you require electrostatic powder coating, wet painting, sandblasting, coating, washing, or similar systems, our solutions deliver maximum efficiency with minimal personnel requirements and the smallest possible footprint.