Niemann V KDV 93-15 FU Vacuum Dissolver

Niemann V KDV 93-15 FU

Stanje: rabljeno, Leto izdelave: 2001, Filling and closing machine for filling yoghurt and quark into plastic buckets of various sizes. Plastic buckets are taken from the stack in the bucket magazine and placed onto the conveyor belt. Before filling, the buckets, and before closing, the lids, are sterilized using a heating cartridge with hydrogen peroxide and steam. A calibrated load cell fills the product into the buckets until a pre-set weight is reached. The closer picks lids from the lid magazine, places them onto the buckets, and presses them down firmly. Machine feature: gravimetric filling Credpfx Ajyvtrlofwei Output approx.: 450 units/hour based on 6.1-liter buckets; dependent on packaging size and product viscosity Power: 11 kW Voltage: 400 V Frequency: 50 Hz Heating/cooling: Steam 3 bar; 10 kg/h Compressed air: 6-8 bar; Qmax = 300 l/min Length: 3,708 mm Width: 968 mm Height: 2,442 mm Formats: 1.3-liter buckets (H = 132 mm, Dmax = 132 mm); 6.1-liter buckets (H = 195 mm, Dmax = 226 mm); 10-liter buckets also possible Direction of flow: left -> right Basic design: longitudinal runner Equipment: filling head; closing head; bucket magazine; lid magazine; heating cartridge; load cell; protective housing with doors; control cabinet with push buttons and 12-inch touch display; product connection/CIP supply DN50; steam connection 1"; compressed air connection 3/8"; CIP return DN40

Stanje: rabljeno, Used Drais dissolver (Germany), model RN 3-45 AS VAC. Product-contact components are made of magnetic stainless steel (ferritic steel). The machine is designed for vacuum operation. The mixer features a single shaft with a working length of 105 cm, equipped with a toothed disc with a diameter of 690 mm. The shaft is driven by an electric motor with a power of 45 kW, 1460 rpm, 400/690 V, 50 Hz. Operating shaft speed up to approximately 600 rpm. The mixer is equipped with a side wall scraper driven by a gearbox and an electric motor with a power of 1.5 kW, 1410 rpm, 440 V, 50 Hz. Scraper operating speed up to 26 rpm. The machine comes with a top cover and a vessel with a total capacity of 2000 l. Internal vessel dimensions: diameter 1465 mm x straight side wall height 1160 mm. The vessel has two bottom discharge outlets, each located at the sidewall, equipped with valves, and is mounted on two lower rails for forklift handling. The dissolver is hydraulically lifted/lowered. Lifting range approx. 145 cm. Hydraulic drive powered by an electric motor with a power of 1.5 kW, 1420 rpm, 230/400 V, 50 Hz. Included is a Tepro (Poland) vacuum pump and a control panel. The machine was last used in the chemical industry. Crodpfxoykn U Ns Afwoi

Stanje: rabljeno, System for filling yogurt and curd into round plastic buckets of various sizes and for labeling these with self-adhesive wrap-around labels. The system consists of a separate filling/sealing block and a labeling unit. Filler/Sealer: The plastic buckets are taken from the stack in the bucket magazine and placed onto the conveyor belt. The buckets are sterilized with a hydrogen peroxide and steam heater before filling, and the lids are sterilized before sealing. A calibratable weighing cell doses the product into the buckets until a predetermined weight is reached. The sealer applies lids from the lid magazine onto the buckets and presses them on firmly. Labeler: Inline labeling machine for self-adhesive wrap-around labels. Suitable for various bucket sizes from 1 to 5 kg capacity. Additional info: Gravimetric dosing; Labeling of self-adhesive wrap-around labels Filler/Sealer output approx.: 450 units/h (based on 6-liter buckets), depending on container size and product viscosity Crodpfx Afey Nnb Uowoi Labeler output approx.: 1,080 units/h Formats: Round plastic buckets from 1 to 10 liters Equipment: Bucket filling and sealing machine; Bucket labeling machine

Stanje: rabljeno, Stožčasto dno Premer: 1.500 x 1.500 = prostornina 3.000 l Skupna višina: 2.800 mm Premer jaška: 500 mm Tlak: -1/3 bar Delovna temperatura: 200 °C Nerjavno jeklo 316L Motor SEW 0,9 kW - 31 vrt/min / 1,8 kW - 64 vrt/min Credpsz Rnztsfx Afwji 400 V Primerno za CIP (čistljenje na kraju samem) Primerno za neposreden vnos pare Primerno za vakuum Opremljeno z mešalom Električna omarica ni vključena v dobavo Namestitveni okvir ni vključen v dobavo