Nedermanov sistem visokega vakuuma

NEDERMAN VAC 20-1500 / FlexFilter DX

Leto izdelave: 1995, stanje: pripravljen za uporabo (rabljen), Four dissolvers from various manufacturers are available: 1) Niemann NLD I, year of manufacture: 1995. 2) Vollrath VDSVY 15, year of manufacture: 1992, shaft length: 700 mm, disc diameter: 400 mm, vessel capacity: 400 l, vessel diameter: 785 mm, vessel height: 990 mm, outlet diameter: 45 mm. 3) Vollrath VDSVY 40, year of manufacture: 1991, vessel capacity: 400 l, speed: 1000 rpm, shaft length: 700 mm, disc diameter: 400 mm, machine dimensions (LxWxH): approx. 3200 mm x 800 mm x 1200 mm. Hedpfxsvnuckj Abxsnn 4) Pendraulik WDV 10, speed: 1800 rpm, shaft length: 985 mm, disc diameter: 275 mm, stroke height: 1250 mm, machine dimensions (LxH): 560 mm x 3450 mm, weight: approx. 850 kg. On-site inspection is possible.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2021, obratovalne ure: 98 h, nosilnost: 200 kg, dvižna višina: 13.000 mm, gradbena višina: 2.100 mm, vrsta goriva: električni, vrsta pogona: Elektro, Členasta teleskopska dvižna ploščad Tehnično stanje: zelo dobro Sprednje pnevmatike tip: polna guma Sprednje pnevmatike dimenzija: 600x190 Zadnje pnevmatike tip: polna guma Zadnje pnevmatike dimenzija: 600x190 Baterija volt: 48V Hnjdpfx Abevky D Sjxen CE certifikat,

Leto izdelave: 2002, stanje: rabljeno, Diameter 180 mm Workpiece length 0 mm Workpiece width 1350 mm Total power requirement 65 kW Machine weight approx. 7,500 kg Required floor space approx. m T I M E S A V E R S (Netherlands) Wide Belt Deburring and Finishing Machine Model 41 Series 1350 WRDOW-N Year of manufacture 2002 Serial No. 2313-03 _____ Sanding width approx. 1,350 mm Max. workpiece height approx. 1 – 50 mm Feed speed variable approx. 1 – 10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, 780 mm vacuum track in the center of the belt. Belt feed motor approx. 3 kW, frequency controlled for continuously variable feed rate 1 – 10 m/min. Selector switch for forward and reverse belt run, digital display for belt speed and continuous table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11-22 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. Hodot Hw Shepfx Abxonn 3.) Vertical sanding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nonwoven abrasive in various grades available, specially for deburring and cleaning surfaces as well as for radii rounding on workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 5.) Wet processing version = complete coolant system consisting of belt filter unit with pump installed in machine base, rotary union on top of the deburring disc spindle, return of coolant via the vacuum table, and water mist separator above the machine, with blower approx. 5.3 kW. Side doors in V2A stainless steel sheet, oil skimmer, etc. 6.) Side-mounted control panel with clear controls and digital position and speed display. Joystick for feed belt and table adjustment, 3 x ammeters, etc. as well as front and rear workpiece pressure rollers, emergency stop Total drive power approx. 65 kW - 400 V – 50Hz Weight approx. 7,500 kg Required room height approx. 3.50 m Condition: good – available for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: rabljeno, Leto izdelave: 2008, številka stroja/vozila: 0-411-49-1873, Technical data: - Manufacturer: Bütfering - Model: Optimat SGO 211/RC - Number of sanding units: 2 - Year of manufacture: 2008 - Working width: 1,100 mm - Sanding belt width: 1,120 mm - Sanding belt length: 1,900 mm - Workpiece thickness: 3–160 mm - Feed speed: 2.5–13 m/min - Weight: 1,800 kg - Table height adjustment Standard equipment: - Automatic workpiece thickness setting - Infinitely variable feed speed via frequency converter - Up to 125 sanding programs storable - Maintenance-free braking system 1st sanding unit (R) - Calibration roller - Profiled steel contact roller - Diameter: 160 mm - Drive motor: 15 kW 2nd sanding unit (C) - Combination unit with roller and sanding pad - Rubberized contact roller, 65 Shore - Contact roller diameter: 160 mm - Electronic segmented pressure beam with 35 mm segment width - Belt speeds: 12 and 21 m/s - Tolerance compensation up to 1 mm - Suitable for veneered surfaces and solid wood - Drive motor: 11 kW - Total connected load: approx. 28 kW - Operating voltage: 400 V / 50 Hz - Compressed air consumption at 6 bar: 20 l/min - Belt blow-off device per pressure pulse: 440 l/min - Extraction volume: approx. 2,880 m³/h at 20 m/s - Extraction nozzle: 1 x Ø 160 mm (sanding unit, roller) Hsdpfjyh Hwujx Abxjnn 1 x Ø 160 mm (sanding unit, pad) Dimensions: - Length: 1,700 mm - Width: 1,850 mm - Height: 2,100 mm - Location: not in stock - Available from April 2026

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Specialized press designed from the ground up for briquetting iron, steel, and similar alloys. Features integrated oil drip mats. No packaging table included—only briquette guides (rails). Supplied as standard with transparent bunker doors and oil heating elements. The machines are operated via Siemens KTP-400 touchscreen panels. 2nd generation available for purchase from February 2024. For this press, please contact us first! Technical specifications: Throughput: Up to 600 briquettes/hour* Main motor: 30 kW Feed motors: 2.6 kW Cooling system: 1.6 kW Total power: 34.2 kW Oil tank: 260 litres Filters: 4 Length: 2000 mm Width: 2000 mm Height: 2200 mm Weight: 3500 kg Hodpstmugcofx Abxenn Briquette size: 40-110, D80 mm Warranty: 2 years / 2,000 operating hours

Stanje: novo, Pressure: 40 t Throat depth: 225 mm Stroke: 8–84 mm Table size: 580 x 450 mm Ram adjustment: 55 mm Strokes per minute: 130 spm Ram surface: 185 x 180 mm Ram bore: 40 H7 mm Hnedpfx Aeb U Hwmjbxjn Passage opening in table: 210 x 170 mm T-slots: 22 mm Clamping plate: 570 x 450 x 65 mm Total power requirement: 3.5 kW Machine weight approx.: 2.7 t Space requirement approx.: 1.4 x 1.1 x 2.1 m - Pneumatic clutch-brake combination Ortlinghaus - Central lubrication system Vogel - Cam controller Balluff - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Blechbreite 1550 mm Blechstärke 6,5 mm Anbiegung 4,5 mm Oberwalzen-Durchmesser 150 mm Seitenwalzendurchmesser 130 mm Unterwalzen-Durchmesser 150 mm Abstand max. OW zu UW 20,0 mm Gesamtleistungsbedarf 2,2 + 1,5 kW Maschinengewicht ca. 2370 kg Abmessung L-B-H 3300 x 1150 x 1110 mm Ausstellungsmaschine - NEU noch nicht in Gebrauch gewesen (!!) Sonderpreis auf Anfrage Ausstattung: - elektro-hydraulische 4-Walzen Rundbiegemaschine * mit angetriebener Oberwalze + Unterwalze * stabile Schweißkonstruktion - Einsatzbereich: * leichte bis schwere Blechbearbeitung (Stahl/ALU/Edelstahl) - elektro-hydraulische Verstellung der Unter- + Seitenwalzen - lineare Führung der Seitenwalzen - Oberwalze angetrieben durch robusten Elektromotor + Planetengetriebe - freibewegliches, separates Bedienpult - gehärtete Walzen SAE 1050 (CK 45) + bombiert Hnodpfxsxabkbe Abxjn - Konischbiegeeinrichtung - 3x Achs Digitalanzeige für genaue Walzenpositionen - elektro-hydraulisches Klapplager - Bedienungsanleitung (PDF)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Technische Daten: - Arbeitsbreite: 1350 mm - Pneumatische Oszillation - Vakuumtisch - Stand-alone Maschine (Tischhub/-senkung) 1. Kombi-Aggregat: - Motorleistung: 18,5 kW - Stahlkalibrierwalze - Stufenlose Bandgeschwindigkeitsregelung - Segmentiertes Schleifpad (52 Segmente à 26 mm) Hnedevdtxiepfx Abxsn 2. Kombi-Aggregat: - Segmentiertes Schleifpad (52 Segmente à 26 mm) - Motorleistung: 7,5 kW - Stufenlose Bandgeschwindigkeitsregelung - Bürste am Materialauslauf - Stufenlose Vorschubregulierung - Pneumatische Bandreinigung

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, Single-Head Upstroke Cut-Off Saw with 600 mm Blade Single-head upstroke cut-off saw with a 600 mm blade, designed for precise and versatile cuts. - Table rotation: manual, up to ±20°, both right and left. - Pre-set angles: quick positioning at 90° and 45°. - Intermediate angular positioning: manual with pneumatic locking for any cutting angle. - DIGIT: equipped with a digital display for precise angle positioning. - MQL: minimum quantity lubrication system for efficient tool management. - Cutting unit rotation: up to ±20°. Technical Specifications - Blade diameter: 600 mm - Blade bore: 50 mm - Blade rotation speed: 2800 rpm - Motor power: 4 kW - Dimensions (W x D x H): from 920/1520 x 1320 x 1525/1800 mm - Weight: approx. 470 kg Hnodpfov I N Eysx Abxjn

Stanje: novo, Pressure: 25 t Throat depth: 200 mm Hodpjb U Hwnsfx Abxsnn Stroke: 4 - 80 mm Table size: 520 x 400 mm Strokes per minute: 160 spm Continuous operating capacity: 1370 Nm Single stroke capacity: 2740 Nm Stroke adjustment: 4 - 80 mm Ram adjustment: 40 mm Ram surface: 160 x 160 mm Table through-hole: 200 x 150 mm Clamping plate: 500 x 380 x 60 mm Table through-hole: 80 mm Machine weight approx. 1.9 t - Ortlinghaus hydraulic clutch-brake combination - Vogel central lubrication system - Balluff cam controller - Height-adjustable table - Control cabinet with touchscreen - Foot switch