Tlačni puhalnik m³ / min 1,1 kW

MZ VM350/NR2

Stanje: novo, Leto izdelave: 2025, Construction size: 5 Nominal heat output: 145 kW -- Complies with BImSchV Stage 2 and CE standards -- Combustion chamber fully lined with refractory material For rooms up to: 3,800 m³ (according to DIN) Gedpfxsdlhcro Ab Tskf Fuel types: Firewood, chipboard, wood chips, briquetted wood chips Fuel consumption: 35 - 40 kg/h Fan air output (free-blowing): 9,400 m³/h Air outlet opening: Ø 700 mm Flue connection: Ø 220 mm Weight: 1,950 kg SPS control cabinet: 380 Volt

Leto izdelave: 2021, Stanje: novo, številka stroja/vozila: 2021102613, Aluminum angled conveyor belt with supporting frame Conveyor length: 2000 mm straight + 2200 mm inclined Incline angle at the bend: 45° Discharge height: approx. 1800 mm Height of the horizontal section: 200 mm (top edge) PU conveyor belt Conveyor belt type: EM 9/2 0+05 PU petrol matt Belt width: 500 mm 21 pcs. T30 cleats welded on — pitch 310 mm * Antistatic due to threads woven into the running side Endless welded with stepped finger joint 40 mm wave edge, high-frequency welded on both sides * Edge-free zone on both sides for belt tracking in the incline Full-surface support sheet Gedpoh Eld Esfx Ab Tekf Drive: Motor approx. 1.1 kW Belt speed approx. 0.4 m/sec * Optional control via frequency inverter Connection 220/400V, 50Hz, protection class IP54

Stanje: zelo dobro (rabljeno), Kataloška številka 7259 TEHNIČNI PODATKI - širina dovoda: 400 mm - višina dovoda: 200 mm - širina gredi: 530 mm - premer gredi: 550 mm - dolžina rezila: 530 mm - število rezil: 2 kos - mere sita: 50x50 mm - 2 spodnji zobati vlekalni gredi - motor spodnje gredi: 2,2 kW - zgornja zobata vlekalna gred - motor zgornje gredi: 2,2 kW - tračni podajalnik: 0,55 kW - dolžina podajalnega traku: 3000 mm - širina podajalnega traku: 410 mm - glavni motor: 45 kW - avto-reverz Gsdpfx Aborit Nlo Tekf - vzvratna vožnja - dimenzije stroja (d/š/v): 2900x1600x1600 mm - dimenzije podajalnika (d/š/v): 3070x720x670 mm - teža približno 3500 kg PREDNOSTI – nemška proizvodnja – avto-reverz (z možnostjo nastavitve) – vzvratna vožnja – rabljen sekalnik, zelo dobro ohranjen Neto cena: 85.900 PLN Neto cena: 20.450 EUR po tečaju 4,2 EUR (Cene se lahko spreminjajo glede na valutna nihanja)

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, nosilnost: 210 kg, doseg roke: 2.700 mm, Als PLC Merkezi Bulgaria unterstützen wir unsere Kunden in jeder Phase ihres Automatisierungsprozesses. Wir bieten einsatzbereite Robotersysteme abgestimmt auf Ihre individuellen Anwendungsanforderungen wie Palettieren, Fräsen, Materialhandling und viele weitere Aufgaben. Sollten Sie bereits einen Roboter besitzen, diesen jedoch nicht spezifisch für Ihre Zwecke einsetzen können, bieten wir auch die Herstellung individueller Greifer sowie entsprechende Engineering-Dienstleistungen an. Gkjdpfx Aberlm Uns Tsf Die PLC Merkezi Robotics-Abteilung ist auf Industrieroboter führender Hersteller wie KUKA, ABB, FANUC und Yaskawa Motoman, auf Robotik-Überholung und Engineering-Prozesse spezialisiert. Aktuell verfügen wir über ein Lager mit 200 Robotern. Darüber hinaus bieten wir Ersatzteilverkauf, Überholung, Reparatur und Ingenieurdienstleistungen für die industrielle Robotik an. Unsere überholten Roboter verfügen über ein Jahr Garantie. Bitte beachten Sie, dass die angegebenen Preise keine Versandkosten enthalten.

Leto izdelave: 2016, Stanje: pripravljen za uporabo (rabljen), Length: 2800 mm, width: 800 mm, height: 2800 mm, comes with manual, machine has seen little use. Gsdpjhytxzefx Ab Tjkf

Leto izdelave: 2012, Stanje: zelo dobro (rabljeno), številka stroja/vozila: MBHF M01+02, Technical data: 2x Zasche / Demag KSL-L Manipulator handling devices, lifting aids Payload at maximum outreach: 12+15 kg Gedpfepwgrfox Ab Tekf Height: approx. 3.3 m Underside of jib: approx. 3.2 m Outreach: approx. 1.50 + 1.50 m = 3 m Total weight approx. 300 kg with gripper and controls Height: approx. 2.7 m Underside of jib: approx. 2.6 m Outreach: approx. 1.40 + 1.40 m = 2.8 m Total weight approx. 300 kg without gripper and controls Swivel range 360° (via articulated arm), connection to 400V 16A Crane is dismantled and immediately available Item location: 75053 Gondelsheim See pictures Shipping by freight forwarder or collection only by appointment

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, drobilec SG - 500/200 Gkodpfx Abewhw Ius Tjf - Drobilec je popolnoma generalno obnovljen in pripravljen za obratovanje - K drobilcu je priložen 8 m dolg vibracijski transporter z ločevanjem, kjer se ločuje žagovina, opremljen z magnetom in zaznavanjem kovin V prilogi najdete tehnične parametre stroja - električna omarica za stroj.

Stanje: novo, Leto izdelave: 2025, Extremely powerful industrial magnet for iron separation Special price: €970 net (Shipping: €14.90 net) Gsdpfx Abetqfhxe Tjkf *You can find the construction lengths in image 2. The active side features a stainless steel end plate (material 1.4301). Threaded holes are provided on the rear side for mounting; a handle is available upon request. The block magnet systems can be used at operating temperatures up to a maximum of +100 °C. The magnetic surface must be regularly cleaned of collected ferrous parts. Attraction distances for all types, e.g.: For an M5 steel nut: approx. 60 mm For an M5 x 30 screw: approx. 100 mm Mounting example 1: When installed above a conveyor belt, iron parts "jump'' to the magnet's contact surface. Mounting example 2: When installed in a pipeline system with direct contact to the material flow. For high separation reliability, a cascade setup of multiple block magnets in succession is possible. Installation and safety instructions: When handling, unpacking and installing, ensure that no loose iron objects, such as tools or screws, are nearby. The magnetic attraction is so strong that painful injuries can occur if fingers get between iron parts and the active surface. There must be no steel parts under the active surface within a minimum distance of 400 mm.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1991, Residual wood disposal including chipping station Drum chipper / Chipping machine / Wood shredder overhauled (workshop-refurbished) Manufacturer: HAAS Year of manufacture: 1991 consisting of: HAAS Drum Chipper Type HTH-160x510 L2WV factory-refurbished (fully overhauled) with new bearings (spherical roller bearings) and tested rotor new knives and counter-knives Feed width/height: 510 x 160 mm Rotor diameter: 500 mm Screen perforation: 60 x 60 mm Drive power: 45.0 kW Feed motors: 2 x 2.2 kW Weight: approx. 3,000 kg Gedpfxjw H Eqzs Ab Tskf Machine color: RAL 6011 reseda green without electrical installation including control cabinet with all plant-related installations according to CE standards. Operation at the cabinet door, without cables 1 Piece Vibratory Feeder Trough Type HVSR 500x8000 factory-refurbished (fully overhauled) with new bearings (spherical roller bearings) and checked vibrating elements Trough width: approx. 500 mm Trough length: approx. 8,000 mm Trough height: approx. 170 mm Wall thickness: approx. 5 mm Infeed height: approx. 450 mm Total infeed height: approx. 770 mm Discharge height: approx. 950 mm Total discharge height: approx. 1,120 mm Drive power: approx. 4.0 kW Weight: approx. 1,400 kg Machine color: RAL 6011 reseda green Vibratory trough ascending (approx. 4.5°) including screen zone 15 x 15 mm, L = 500 mm including metal-free wooden zone, new (L = 1,500 mm) including used metal detector without electrical installation 1 Piece HAAS Drag Chain Conveyor Type HKF-490x11,000 factory-refurbished with new bearings, tested conveyor chain and carriers Width: approx. 500 mm (600 mm) Length: approx. 11,000 mm Trough height: approx. 570 mm with bottom bend: 45° Total height: approx. 6,700 mm Drive power: approx. 5.5 kW without electrical installation All machines are available individually (subject to prior sale). Additional machines (chain conveyors) are available as new units (Manufacturer: S&F GmbH).

Stanje: zelo dobro (rabljeno), Gear motor, electric motor, geared electric motor - Manufacturer: SEW-Eurodrive, gear motor - Type: SA77 DAS90S4/TF/IS - Speed: 1450/6.4 rpm i= 225.26 - Power: 0.55 kW Gedpfx Aoq U Tywob Tskf - Hollow shaft: Ø 50 x 190 mm - Dimensions: 550/280/H300 mm - Weight: 69 kg