Stiskalnica za briketiranje
muetek MPP 280

Name: muetek MPP 280
Brand: muetek
Availability: InStock

Leto izdelave

2026

Stanje

Novo

Lokacija

Neckartailfingen Nemčija

Stiskalnica za briketiranje muetek MPP 280

Prikaži karto

Podatki o stroju

Oznaka stroja:: Stiskalnica za briketiranje

Proizvajalec:: muetek

Model:: MPP 280

Leto izdelave:: 2026

Stanje:: novo

Obratovalne ure:: 8 h

Cena in lokacija

Lokacija:: Grienweg 38, 72666 Neckartailfingen, Deutschland

Pokliči

Podrobnosti ponudbe

ID oglasa:: A627267

Posodobitev:: nazadnje dne 28.01.2026

Opis

Availability upon agreement

Very robust machine with high pressing force
- Also suitable for producing a marketable briquette quality *depending on material. The large-dimensioned pressing cylinder and the 80 mm briquette diameter make this possible.

Hedpfxjxfwds Adkoni
Our bestselling briquetting press series
+ Proven, simple technology for extremely low susceptibility to faults
+ 25 years of experience, ongoing development, and expertise
+ Several thousand machines in operation with satisfied customers
+ Excellent price-performance ratio

Surcharge for cooling unit + €4,995 net (can also be retrofitted later)

* Cools the pressing tongs and hydraulic oil (recommended if the press is operated continuously for more than approx. 3.5 hours without pause)

Briquette diameter: 80 mm
Front bush: 125 mm
Maximum briquette stroke: 100 mm
Optimal briquette stroke: 80 mm
Throughput (depending on material): up to 200 kg/h*
*depending on bulk density
*based on a bulk density of 200 kg per cubic meter

Motor power: 9.2 kW
400 Volt / 50 Hz / 3-phase
Length: 2095 mm
Width: 1300 mm
Height: 1700 mm
Weight: 1250 kg
Oil volume: 220 liters
Silo diameter: 1200 mm
Silo capacity: approx. 1 cbm
Pump: 75 liters
Hydraulic pre-compressor
Press jaw cooling option: yes, with special accessory coolable press jaw
Hydraulic oil cooling option: yes
Cooling of press jaw and hydraulic oil with cooling unit (special accessory)
Fill level monitoring option: yes
Continuous briquette option: yes (material dependent)
Enlarged filling slider option: yes, with special accessory enlarged filling slider
CE compliant

Requirements for raw material:
- The moisture content (atro) must be at least 6% and not exceed 18%
- Maximum chip length 20 mm
- Installation temperature: heated environment, at least +5°C
- The feedstock must be free from metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may occur as a result.

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.

Dokumenti

627267-01.pdf

Ponudnik

Registriran od: 2005

49 Oglasi na spletu

Pokliči

Pošlji povpraševanje

Telefon & Faks

+49 711 5... oglasi

+49 711 9... oglasi

Faks:

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

Sito/drobilnik Sonstige/Other Gremac e1 Radmobile Trommelsiebanlage

Schorfheide

752 km

Sito/drobilnik
Sonstige/OtherGremac e1 Radmobile Trommelsiebanlage

48.500 €

~~52.000 €~~

EXW VB plus DDV

Pokliči

Stanje: novo, Leto izdelave: 2022, obratovalne ure: 1 h, številka stroja/vozila: 268955558, GREMAC e1 Trommel screening plant Tandem chassis / axles 2x kg (permissible total weight) kg unladen weight without power unit Overrun brake Vehicle lighting in accordance with German Road Traffic Licensing Regulations (StVzO) TÜV approval Drum Length: mm Diameter: mm 4.0 kW electric drive Speed adjustable via frequency inverter Lifting screw Adjustable cleaning brush Hopper with conveyor belt Rubber belt with chevron profile 0.75 kW electric drive Speed adjustable via frequency inverter Fine material collection belt Movable suspension Smooth rubber belt 1.5 kW electric drive Speed adjustable via frequency inverter Fine material conveyor Movable suspension Rubber belt with chevron profile 2.2 kW electric drive Speed adjustable via frequency inverter 25° angle of inclination Manual cable winch for angle adjustment Oversize stockpile conveyor Movable suspension Hedsl Hbcfopfx Adkoni Rubber belt with chevron profile 1.5 kW electric drive Speed adjustable via frequency inverter 25° angle of inclination Manual cable winch for angle adjustment Control system Siemens Logo PLC Control panel with buttons and potentiometers 400V power circuit 24V control circuit Main switch Ceekon 16A socket Emergency stop relay Without generator Cladding Hot-dip galvanized frame parts Painted drum Covers powder-coated in RAL7005 and RAL5018 Further information Application: Construction General condition: very good Technical condition: very good Visual condition: very good Delivery terms: EXW

Poglej podrobnosti

Mali oglas

Oblikovalec debeline Robland D630EL - Tersa

Egenhofen

373 km

Oblikovalec debeline
RoblandD630EL - Tersa

Pokliči

Stanje: novo, Leto izdelave: 2022, Working width: 630 mm Hnodpfx Adjl D Rxfekji Planing height: 300 mm Cutterblock: Tersa Number of knives: 4 Height adjustment: electric Planing thickness display: digital readout Feed speed: infinitely variable 5 - 22 m/min Infeed roller: steel Pressure bar: segmented Outfeed roller: rubber, 2x Table rollers: no Motor power: 9.2 kW Extraction connection: 160 mm Machine length: 1200 mm Machine width: 1200 mm Weight: 1000 kg

Poglej podrobnosti

Mali oglas

20-29-556 ŠIROKOTRAČNI BRUSILNI stroj s WOODLAND MACHINERY R-R-RP1300

Jonava

1.189 km

20-29-556 ŠIROKOTRAČNI BRUSILNI stroj s
WOODLAND MACHINERYR-R-RP1300

26.000 €

Fiksna cena plus DDV

Pokliči

Stanje: novo, mit Hobelwelle Typ: R-R-RP1300 Arbeitsbreite: 1300 mm Min. Werkstücklänge: 538 mm Arbeitshöhe: 3–110 mm Vorschubgeschwindigkeit: 6–30 m/min Gesamtanschlussleistung: 77,12 kW Motorleistung erste Einheit: 22 kW Motorleistung zweite Einheit: 30 kW Hnodpod H Sc Eofx Adkei Motorleistung dritte Einheit: 18,5 kW Schleifbandabmessungen: 1330x2200 mm Arbeits-Luftdruck: 0,55 MPa Absaugleistung: 12.000 m³/h Transportmaße (LxBxH): 3090x2020x2260 mm Gewicht: 4.700 kg

Poglej podrobnosti

Mali oglas

Dvorišče za hlode Baljer & Zembrod RUW 1651

Nemčija

394 km

Dvorišče za hlode
Baljer & ZembrodRUW 1651

Pokliči

Stanje: rabljeno, Leto izdelave: 2002, obratovalne ure: 37.000 h, številka stroja/vozila: 1651, doseg roke: 15.200 mm, nosilnost: 1.900 kg, širina gosenic: 3.000 mm, Oprema: kabina, žerjav, Year of manufacture: 2002 Machine number: 1651 Track width, m: 3.0 Crane type: OBX II (year of manufacture 1997) Reach: 15.2 m Lifting capacity without grab: 1,900 kg / 15.0 m Hodpfx Adev Hwk Uoksni Grab: included Crane position: behind the cab Cab side: center !! Sale on behalf of customer !!

Poglej podrobnosti

Mali oglas

Stiskalnica za briketiranje Falach Falach 35

Egenhofen

373 km

Stiskalnica za briketiranje
FalachFalach 35

10.900 €

Fiksna cena plus DDV

Pokliči

Mali oglas

Širok pas brusilnik Unitek Winner 1100 pneumatic

Naprawa

533 km

Širok pas brusilnik
UnitekWinner 1100 pneumatic

21.980 €

Fiksna cena plus DDV

Pokliči

Stanje: novo, Technical data: Working width: 1100 mm Abrasive belt size: 1120 x 2150 mm Max working height: 160 mm Calibrating steel roller diameter: 150 mm Rubber roller diameter: 150 mm Hodpfegtm U Ajx Adksni Sanding shoe width: 50 mm Total motor power for both sanding units: 11 kW Abrasive belt speed: 16/18 m/s Feed motor power: 0.55 kW Infinitely variable feed belt speed: 4–20 m/min Work table motor power: 0.25 kW Pneumatic shoe lift/drop: YES

Poglej podrobnosti

Mali oglas

Cantù

455 km

Formatna žaga
ALTENDORFF 45

Pokliči

Stanje: dober (rabljeno), Kód: 0302 Značka: ALTENDORF Model: F 45 - CE standard CNC upravljana 3-osna formatna žaga z nagibnim žaginim listom za izdelavo pohištva, pohištvo po meri, plošč, vrat, lesenih okenskih okvirjev, plastike, kompozitnih materialov in različnih aplikacij - CE standard. Tehnični podatki: Hnedpfx Asylhmzodkei Natančno vodilo z dvojnimi kolesi na vozičku Dolžina aluminijastega vozička: 3200 mm Največji premer žaginega lista: 450 mm Največja višina reza: 150 mm Višina reza pri 45°: 105 mm Predrezalni list – premer: 120 mm 3 krmiljene osi (dvig/nagib lista/paralelno vodilo) Elektromotorno nastavljanje predrezalne enote v 2 oseh Upravljalna plošča na višini upravljavca z barvnim LCD zaslonom Anodizirano aluminijasto podaljšanje mize: 840 mm Zaščita lista s paralelogramskim mehanizmom Vodilo za poševne reze – ročna nastavitev z dolžinsko kompenzacijo, kapiranje do 3500 mm Sistem za blokado žaginega lista Višina delovne mize: 910 mm Skupne mere sestavljenega stroja (mm): 3400 x 3400 x 1700 (v) Skupne mere za transport (mm): 3400 x 2100 x 1700 (v) Teža (kg): 1050

Poglej podrobnosti

Mali oglas

Drsna namizna žaga Robland PS 3200 silver line

Grońsko

704 km

Drsna namizna žaga
RoblandPS 3200 silver line

9.350 €

Fiksna cena plus DDV

Pokliči

Stanje: zelo dobro (rabljeno), sliding table saw Robland 3200 Silver Line scoring unit with separate motor, sliding table length: 320 cm main motor: 7 kW 3 spindle speeds maximum blade diameter: 450 mm Hnjdpfx Aev S Hy Ajdkei tilt adjustment 0–45° electrically controlled with digital readout blade height adjustment electrically controlled, without readout drip fence (rip fence) on the right, motorized adjustment up to 1240 mm digital readouts on carriage crosscut fence angle-cutting device included Branded machine in very good condition.

Poglej podrobnosti

Mali oglas

20-60-543 Drsna namizna žaga WOODLAND MACHINERY MJ6122TD(400)

Jonava

1.189 km

20-60-543 Drsna namizna žaga
WOODLAND MACHINERYMJ6122TD(400)

4.499 €

VB plus DDV

Pokliči

Stanje: novo, Bester Preis: 4499 EUR (EXW Jonava, Litauen) Abmessungen des Schiebeschlittens: 2200 x 375 mm Max. Schnittlänge: 1500 mm Schnittbreite zwischen Sägeblatt und Parallelanschlag: 1140 mm Sägeblattdurchmesser: 400 mm Schnitthöhe (90°): 115 mm Hnodpfednxydex Adkei Schnitthöhe (45°): 105 mm Drehzahl Hauptsäge: 4.500 / 6.000 min⁻¹ Hauptsägewelle Durchmesser: 30 mm Sägeblatt schwenkbar: 0–45° Sägenhub, Heben und Senken mit elektrischer Steuerung Hauptmotor: 5,5 kW Vorschnittsägeblatt Durchmesser: 120 mm Drehzahl Vorschnittsäge: 7.000–8.000 min⁻¹ Vorschnittsägewelle Durchmesser: 20 mm Vorschnittmotor: 1,1 kW Gewicht: 700 kg * Beim Einsatz eines 400-mm-Sägeblatts muss das kleinere Blatt entfernt werden. * Reduzierte Sägeblätter dürfen nur mit maximal 350 mm Hauptschutz verwendet werden.

Poglej podrobnosti

Mali oglas

Cloppenburg

897 km

2010 Vollmer CL 200
VollmerCL 200

Pokliči

Stanje: rabljeno, Leto izdelave: 2010, Suitable for the automatic grinding of tooth face, tooth back, and blade body on carbide-tipped circular saw blades in a single clamping operation. All common tooth geometries (flat, alternate, trapezoidal tooth, etc.) can be ground automatically and in a single pass. Accessories: Hnodpfowp Eblox Adkei - Full enclosure - Measuring probe - Device for grinding with oil cooling - Automatic fire extinguishing system - Grinding mist extraction N 183 - Alphanumeric keypad - Oil catch tray - Machine lamp Saw diameter: 80–840 mm Bore diameter: from 10 mm Blade thickness: < 8 mm Tooth pitch: 6–120 mm Cutting length:

Poglej podrobnosti

Oglašujte tukaj