Stiskalnica za briketiranje

muetek MAP 1200

Refurbished Used Machine

Base machine starting from: €147,700 net
*Options available at additional cost, see below

with full 1-year warranty
Ready for delivery approx. 16 weeks after order

Technical Data:
Throughput capacity up to max. 1,200 kg/h, depending on material
(e.g. sawdust with a bulk density of 180 kg/m³)

Briquette Ø 75 mm
including 2 m press channel
Main motor power 45 kW
Feed screw gear motor 2 x 2.2 kW
Compactor screw 2 x 5.5 kW
Distribution screw 2.2 kW
Hydraulic pump motor 0.37 kW
Total connected load 65 kW
Control panel with plain text display for operating status
and load indicator for main drive and feed screws
PLC control Siemens S7/300 with hour meter in control cabinet
Machine carries CE marking
Automatic start/stop function
Dimensions 3,100 x 860 x 1,800 mm (L x W x H)
Weight 4,500 kg

Options:

Silo for MAP series (suitable only for one MAP 1200 press)
- Storage silo above the machine -
Capacity approx. 6 m³, robust steel construction with agitator discharge and fill level sensor.
€19,700 net plus VAT.

- Temperature control unit for the press tools
Ensures optimal briquette quality by maintaining required temperature. Temperature controller for pump, cooling unit, ventilator, pressure switch
Ready-wired — mandatory for operation
including corresponding control unit
€7,850 net

- Guillotine for cutting briquettes to length
Compressed air connection required on site
€6,940 net plus VAT

- Conveyor line / cooling section (nominal: 4 x 2 m)
Per 2 metres, €990 net

Installation / Commissioning (nominal for each press approx. 2–3 days onsite)
By effort, invoiced separately according to the following rates:
Service technician / mechatronics per assembly and travel hour: €129.00
Overtime: 25% surcharge
Each Saturday or night hour: 50% surcharge
Each Sunday and holiday hour: 100% surcharge
Allowance per fitter per day: country dependent
Per car and transporter km: €0.98/km
Ksdpfx Agj E Dquskodw
Travel and accommodation billed according to receipt or flat rate, at purchaser’s expense.

Testing with customer’s own material (by prior arrangement, up to max. 750 kg) — €1,970 net flat rate

---
Requirements for raw material:
- Moisture content (atro) must be between a minimum of 6% and a maximum of 18%
- Chip length max. 20 mm
- Installation temperature: heated area with at least +5°C
- Feeding material must be free from metals and mineral contaminants. Damage to the press tools and/or increased wear may result.

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.