Enoslojna stiskalnica - hidravlična

MUELLER CE 25

Stanje: dober (rabljeno), Leto izdelave: 1988, številka stroja/vozila: 222 056 A110, Müller Weingarten CE 40.25.4 Press -WAG 850- The machine has been tested in accordance with VDE regulations until 23.09.2026. Manufacturer: Müller Weingarten Iasdpeqrqz Aofx Af Tel Operating voltage: 380 V Control voltage: 220 V DC voltage: 24 V Rated current of the machine: 25 A Frequency: 50 Hz Year of manufacture: 1988 Overrun distance: 9 mm Overrun time: 80 ms Safety distance: 128 mm

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. rapid approach speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table cut-out: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom-built for you. Production lead time is approx. 5 months after receipt of payment. Rapid approach: The press moves at up to 90 mm/sec to the zero point. Positioning accuracy is 0.5 mm or better. Iajdpfofxyhfjx Af Tel Return: The press returns to the end point at up to 90 mm/sec. Accuracy is 0.5 mm or better. The dwell time can be adjusted from 0 to 10 seconds (in 0.1 sec increments). Pressing force is adjustable in bars, corresponding to 10 to 40 tons. Further details on the control system: Operation can be locked via a key switch. The control key switch provides the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stop at any desired position by releasing the switches.) - Manual operation for bending at up to 9.5 mm/sec via two-hand control, with automatic return to TDC upon releasing both buttons. - Automatic operation with safe tools at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine is strictly intended for use with enclosed, safe tools only. This warning is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. The key-operated selector switch allows switching between automatic and manual operation. Position adjustment for TDC and BDC, and the shift point for speed reduction, are managed by sensors adjustable on a chrome-plated rod. The sensor can be finely adjusted with a locking thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and operated via two-hand control for sheet metal bending. In automatic mode with safe tools, it can punch, notch, and bend.

Leto izdelave: 1978, Stanje: rabljeno, Pressure 100 t Outreach 380 mm Iaedelp U Dpopfx Af Tol Stroke 400 mm Drive power 22 kW Installation height 600 mm Ram surface 600x500 mm Table surface 720x600 mm Machine weight approx. 9 t Two-hand operation, Stroke and pressure shut-off, Pressing time

Stanje: rabljeno, Leto izdelave: 1991, številka stroja/vozila: 041-024/39, Pressing force: 63 t Throat depth: 360 mm Stroke: 500 mm Installation height: 800 mm Isdpfx Ajvai R Tef Tjal Table clamping surface approx.: 750 x 560 mm Ram clamping surface approx.: 630 x 400 mm Working speed: 60 mm/s Return speed: 380 mm/s Total connected load: 12.6 kW Dimensions (L x W x H): 1,200 x 1,950 x 2,800 mm Machine weight approx.: 4.3 t

Stanje: rabljeno, Leto izdelave: 1985, Pressure: 40 t Stroke: 500 mm Throat depth: 360 mm Installation height: 1000 mm Iedpovzxrpjfx Af Toal Table size: 630 x 500 mm Table height above floor: 1060 / 720 mm Ram area: 450 x 360 mm Downward speed: from 60 mm/s Upward speed: 300 mm/s Drive power: 7.5 kW Weight: 2.75 t Space requirement: approx. 1.0 x 1.8 x 3.05 m (LxWxH) Pass-through opening in table: 200 mm Approved only for use with secured tools or fixed guarding compliant with German accident prevention regulations (UVV) Equipped with oil-hydraulic drive, intermediate plate on table (height approx. 340 mm) Condition as is, without commissioning

Stanje: rabljeno, Leto izdelave: 2003, Pritisk . t Iztek . mm Hod . mm Skupna potrebna moč . kW Teža stroja ca. 4 t Iaodpfow Syfcex Af Tsl

Stanje: rabljeno, Leto izdelave: 1985, Nazivna stiskalna sila: 40 t Hod bata: 500 mm Iasdpfx Aexm R Ivof Tsl Odprtina: 710 mm Velikost mize: 630 mm Iztegnitev bata od stojala: 320 mm Hitrost bata: - prosto 125 mm/s, - stiskanje 16 mm/s, povratna 315 mm/s Stroj je priključen na elektriko, delujoč.

Stanje: rabljeno, Leto izdelave: 1985, Tlak 7 t Izvlek 180 mm Hod 100 mm Delovna površina mize 320x300 mm Površina bata Ø110 mm Prebojna odprtina v mizi Ø50 mm Višina mize 850 mm Luknja za zatič v batu Ø30 mm Teža stroja pribl. 1,5 t Prostorske zahteve pribl. ŠxGxV 1300x1300x2000 mm Sick svetlobna zavesa za zaščitni in taktilni način delovanja Mehanska fiksna omejitev v cilindru Izklop na tlak in hod Iedpexh Sycsfx Af Teal Hitri in delovni hod

Stanje: dober (rabljeno), Leto izdelave: 1982, Pressing force: max. 200 kN Safety distance: 100 mm Secondary stroke: max. 10 mm Motor power: 3 kW incl. accessories Isdpfx Afoxr Ay Uo Tjal