Enoslojna stiskalnica - hidravlična

MUELLER CD 100.11.30 (UVV)

Stanje: rabljeno, Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: TET351P5-offAD-Bypass - 2200373733, hladilna zmogljivost: 66 kW (89,73 KM), vrsta vhodnega toka: trifazni, vrsta hlajenja: voda, skupna masa: 1.082 kg, okoljska temperatura (maks.): 46 °C, temperatura okolja (min.): −5 °C, vhodna napetost: 400 V, pritisk: 6 letvica, temperatura: 7 °C, volumenski pretok: 11,2 m³/h, tlak črpalke: 4,68 letvica, skupna širina: 866 mm, skupna dolžina: 2.250 mm, skupna višina: 2.054 mm, trajanje garancije: 3 meseci, vhodna frekvenca: 50 Hz, Oprema: Na voljo je tipska ploščica, Process Chiller / Air-Cooled Water Chiller, Type: TAEevo Tech 351 P5-offAD-Bypass MTA S.p.A. Chiller, Water Chiller; Cooler TAEevo Tech 351 P5-offAD-Bypass units are air-cooled compact water chillers suitable for outdoor installation down to -5°C. Includes crankcase heater, electronic expansion valves, phase monitoring, 350-liter buffer tank, and integrated P5 high-pressure pump. Special features: - Open filling system/tank attached - Bypass with manual valve between water inlet and outlet Chilled water outlet temperature adjustable from -10°C to +30°C. Gsdowlt Rajpfx Ab Eetw Cooling capacity: 66 kW Chilled water temp. outlet/inlet (°C): 7 / 12 Flow rate (m³/h): 11.2 Available pump pressure (bar): 4.68 Ambient temperature (°C): 32 Refrigerant: R 410A Electrical data: Voltage (V): 400, Frequency (Hz): 50, Phases: 3, Max. power consumption (kW): 39 Max. current (A): 68 Starting current circuit (A): 213 Protection class: IP54 Dimensions: Length (mm): 2250, Width (mm): 866, Height (mm): 2054 Weight (kg): 1082 Connection: Rp 2" Serial No.: 2200373733 Year of manufacture: 2021 Condition: Visual 2, Technically OK used (Subject to technical changes and prior sale!) Location: MTA Deutschland GmbH, 88131 Lindau Used machines may have visual defects due to use. (Subject to technical changes and prior sale!)

Stanje: novo, premer gredi: 80 mm, - Section bending machine - Shaft diameter: 80 mm - The two lower rolls are hydraulically adjustable Gtjdpfeucqquex Ab Eew - Three driven rolls - 2 digital displays - Brake motor - Usable in horizontal and vertical position - Mobile control panel - Emergency stop - Documentation - 400V

Stanje: novo, Leto izdelave: 2023, Tube drilling machine, angle drilling machine, automatic drilling unit TDM100, manual operation, equipped with one drilling head AVAILABLE IMMEDIATELY FROM STOCK + CAN BE INSPECTED UNDER POWER - Minimum quantity lubrication - Manual material clamping - Manual feed - Maximum tube length 3,000mm (option: 6,000mm) - Positioning accuracy +/- 0.2mm - 10 stops (can be extended as required) - Manual loading and unloading of material - Drilling head swivels +/- 50° - Manual 360-degree tube swiveling device - Drilling unit power: 1 x 2.2 kW - Motor speed 295 - 2,950 rpm Gsdpfslgvkiex Ab Eetw - Speed display on touch panel - Drilling unit lighting - Integrated tool cabinet - For round tubes up to 114mm - For square profiles up to 100 x 100mm - For flat material up to 100 x 15mm - For T-profiles up to 100 x 100 x 12mm - For L-profiles up to 100 x 100 x 8mm - For double posts up to 100 x 15mm - Flow drilling up to M12 - Drillings up to Ø 50mm

Stanje: dober (rabljeno), Leto izdelave: 1956, Težki stružni stroj, stružnica, stružna klop, stružnica z vodilnim in gnanimi vreteni Gtjdpfx Ash Uuzyeb Ejw -Proizvajalec: Meuser, stružnica z vodilno in vijačno gredjo tip M3A -Dolžina struženja: 1400 mm -Premer struženja nad posteljo: 550 mm -Premer struženja brez postelje: 800 mm -Premer struženja nad suportom: 300 mm -Premer vretena: Ø 58 mm -Število vrtljajev vretena: 15 - 810 obr/min -Tričeljustna vpenjalna glava: Röhm Ø 250 mm -Čelna plošča: 500 mm -Dodatki: vključno z nosilcem orodij/orodji glej slike -Konus konjička: MK5 -Dimenzije: 2770/1160/V1310 mm

Stanje: pripravljen za uporabo (rabljen), Further information to follow. Gedpfx Asqzx Dqob Ejtw Accessories: Separator frame (stainless steel) 1200 x 1000, separator drum, motor, tool kit, documentation

Stanje: novo, Leto izdelave: 2025, Tlačna peskalna kabina DSK 11.11.30. Peskalni prostor: širina 1050 mm, globina 1050 mm, višina 955 mm. 1 TÜV-preizkušen tlačni rezervoar 30 l s stožčastim iztočnim lijakom. 1 ventil za doziranje peskalnega sredstva s pnevmatskim uravnavanjem količine. 1 vgrajen zapiralni stožec z vodilno cevjo. 1 priključek za stisnjen zrak s pnevmatskim zapornim ventilom in iztokom za krmilni zrak. 1 regulator tlaka za nastavitev peskalnega tlaka. 1 peskalna cev DN19. 1 ročnik z bor-karbidno Venturi šobo 8 mm. 1 par peskalnih rokavic. Električno nastavljiva višina kabine za ergonomičen položaj telesa. Shranjevanje višinskih položajev v spominu za 3 nastavitve. Filter za odpraševanje 2000 m³/h 2,2 kW. Gtedega Ehbopfx Ab Eew

Stanje: rabljeno, Leto izdelave: 2009, Cutting diameter: 15 – 560 mm Cutting range at 90 degrees: flat 560 x 630 mm Saw blade dimensions: 7,400 x 54 x 1.60 mm Control system: KASTO Material feed – single stroke: 900 mm Multiple feed length max.: 9,999 mm Minimum cut-off length: 6.00 mm Saw motor: 5.50 kW Cutting speed: 13 – 127 m/min Material support height: 700 mm Total power requirement: 12.00 kW Machine weight approx.: 6.00 t Space requirements approx.: 3.70 x 2.50 x H2.50 m Two-column automatic bandsaw with KASTO Compact Control; frequency-controlled saw drive; minimum quantity lubrication; Gjdpfxsvxwkfo Ab Eotw swarf conveyor; powered infeed conveyor 6m + 3x short roller conveyors 1m each; outfeed conveyor 2m; machine can be inspected under power.

Stanje: novo, Leto izdelave: 2025, 2-roll driven profile bending machine Hydraulically adjustable top roll Gedpfxohgiuhj Ab Eotw Shaft diameter: 40 mm Roll diameter: 152–162 mm Rotational speed: 8.5 rpm Top roll adjustment: 120 mm Capacity chart: see attachment Machine available in various configurations: Manual adjustment, 3-roll drive, etc.

Stanje: rabljeno, Leto izdelave: 1970, številka stroja/vozila: 120895, Pressing force: 63 t Throat depth: 250 mm Stroke: 8 - 100 mm Strokes per minute: 120 s.p.m. Table: 715 x 500 mm Installation height: 330 mm Ram adjustment: 63 mm Clamping plate: 700 x 480 mm Pass-through opening in the table: 240 mm Pass-through opening in the clamping plate: 110 mm Ram clamping surface: 450 x 280 mm Machine weight approx.: 5.5 t Required floor space approx.: 1.2 x 1.7 x 2.7 m Gtjdpfx Aofx Hv Hsb Esw Single-column eccentric press in tiltable design, via hydraulic adjustment system, tiltable in 4 stages, pass-through opening to the rear (325 x 500 mm) or downward (360 x 160 mm), with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot release can be configured, operation mode selector for continuous or single stroke setup, emergency stop switch, piece counter, various accessories.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, 600 kg load capacity height-adjustable welding positioner with through bore 100 - 200 mm Table diameter 700 mm Horizontal height min. 0.65 m, max. 1.25 m Tilted height min. 0.45 m, max. 0.95 m Speed from 0.01 – 1.1 rpm Tilting angle up to 135° Hand and foot remote control with speed display Gjdpfxjd Anz Re Ab Ejtw Very robust construction