Orodje za izsekovanje Ø 60 mm

Mubea Mubea 60 5-12 Aufnahme 50N

Leto izdelave: 2026, Stanje: novo, Magnetic separator for chip conveyor line Pipe magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal parts Pipe diameter: 180 mm Kedpfx Ajcqvhxef Tsdg Immediately available Location: Ex-stock 54634 Bitburg

Stanje: novo, Saw blade diameter 350 mm Cutting range at 90 degrees: round 115 mm Kdedpfefgpdlsx Af Tjg Cutting range at 90 degrees: square 95 mm Cutting range at 90 degrees: rectangular 180 x 95 mm Working height 925 mm Saw blade speeds 15+30+45+90 rpm Total power requirement 1.8/2.5 kW Machine weight approx. 0.38 t Space requirement approx. 0.8 x 1.0 x 1.85 m Manual vertical circular saw for mitre cuts from 60° left to 45° right.

Leto izdelave: 2025, Stanje: novo, The AL-KO Grinding Table AST 1.5 BASIC is the entry-level model in the AL-KO grinding table range. It is certified according to GS-HO-11 and bears the “Wood Dust Tested according to BGI 739-1” seal. This makes it suitable for manual sanding work as well as for processing workpieces with hand-held power tools. The grinding table is made of galvanized sheet steel. The extraction tray is aerodynamically optimized. Thanks to the funnel-shaped design of the tray with an integrated air duct, the airflow is specifically directed towards the suction connection. Connection to an on-site extraction system can be made via either a 140 mm or a 160 mm diameter port, depending on the required extraction capacity. The folded edges on both long sides of the working surface also allow for end-face machining of workpieces. The extraction grids are aerodynamically aligned with the suction port, ensuring optimal extraction performance. For cleaning tasks inside the grinding table, the slatted beechwood deck can be removed and the air duct can be detached by loosening just a few screws. The grinding table is delivered pre-assembled; only the legs need to be attached and adjusted to the required working height. Your benefits: • Accessible from all 4 sides • Load capacity up to 150 kg • Manual, tool-free height adjustment with scale • Offset long sides for edge sanding • Workpiece-friendly removable beechwood grid • Funnel-shaped air guidance to the suction port Technical specifications: • Suction connection: 140/160 mm • Required extraction capacity: 1,500 m³/h • Negative pressure at the connection at 22 m/s: 1,000 Pa at Ø 140 mm / 700 Pa at Ø 160 mm • Adjustable working height: from 735 to 1,015 mm • Working area (W x L): 946 x 1,500 mm Kjdpfx Aofyadbof Tedg • Dimensions (W x L): 1,000 x 1,600 mm • Weight: approx. 73 kg

Leto izdelave: 2022, Stanje: kot nova (razstavni stroj), AL-KO Sanding Table AST 1.5 BASIC The AL-KO Sanding Table AST 1.5 BASIC is the entry-level model in the AL-KO sanding table range. It is certified according to GS-HO-11 and bears the seal "Wood Dust Tested according to BGI 739-1". YOUR ADVANTAGES - Accessible from 4 sides Kdsdpodqzhbsfx Af Tjg - Loadable up to 150 kg - Manual, tool-free height adjustment with scale - Recessed longitudinal sides for edge sanding - Workpiece-friendly beech wood grate (removable) - Funnel-shaped airflow to extraction port TECHNICAL DATA AST 1.5 BASIC - Extraction port: 140 / 160 mm - Required extraction capacity: 1,500 m³/h - Negative pressure at port at 22 m/s: 1,000 Pa at DN140 mm / 700 Pa at DN160 mm - Working height adjustable from: 735–1,015 mm - Working surface (W x L): 946 x 1,500 mm - Dimensions (W x L): 1,000 x 1,600 mm - Weight: approx. 73 kg

Stanje: rabljeno, Leto izdelave: 1990, I-beam, flat: 140 x 140 x 13 mm I-beam, upright: 120 x 120 x 13 mm Angle steel: 130 x 130 x 12 mm Round steel: 85 mm Bending capacity – flat bar: 125 x 25 mm Flat bar on edge: 65 x 65 mm Including various rollers: Pipe Ø: 219 mm (tool/roller Ø 535 mm) 140 mm (tool/roller Ø 420 mm) 273 mm (tool/roller Ø 520 mm) 203 mm 168.3 mm (tool/roller Ø 500 mm) 75 mm (tool/roller Ø 400 mm) 49 mm (tool/roller Ø 420 mm) Ksdett Ecdopfx Af Tedg 48.3 mm (tool/roller Ø 420 mm) 22.5 mm (tool/roller Ø 420 mm) 32 / 32.5 mm (tool/roller Ø 420 mm) 60 mm (tool/roller Ø 420 mm)

Leto izdelave: 2001, Stanje: pripravljen za uporabo (rabljen), Na voljo je rotacijski upogibni stroj Schechtl za obdelavo pločevine. Delovna dolžina: 2040 mm, višina odprtine: 140 mm, zmogljivost upogibanja: 3 mm, hitrost upogibanja: 50°/s, zadnji prislon: 750 mm. Dimenzije stroja D/Š/V: pribl. 3000mm/750mm/1250mm, teža: pribl. 2750kg. Ogled na lokaciji je mogoč. Kjdpfex Hz Ntjx Af Tsdg

Stanje: rabljeno, Leto izdelave: 2001, Drilling capacity in steel (diameter): 32 mm Throat depth: 322 mm Quill stroke: 180 mm Table size: 500 x 370 mm Spindle taper: MT 4 Spindle speeds: 55–5000 rpm Kdsdpfju Rt Iusx Af Tog Control software: special Total power requirement: 3 kW Machine weight approx. 0.52 t Space requirement approx. 1 x 1 x 2.35 m Column drilling machine with ARBO 20 turret head attachment. Spare parts are included with the machine.

Stanje: rabljeno, External dimensions: Width/Height: 65 mm Length: 2600 mm Kdsdpsb N Nd Usfx Af Tog Weight: 70 kg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2010, številka stroja/vozila: MA 5726, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: polavtomatski, vrsta aktuacije: mehanski, delovna širina: 2.040 mm, najv. debelina jeklene pločevine: 2 mm, maks. debelina pločevine iz nerjavečega jekla: 1 mm, maks. debelina aluminijaste pločevine: 4 mm, skupna masa: 2.030 kg, skupna dolžina: 2.986 mm, skupna širina: 1.903 mm, moč: 2,6 kW (3,54 KM), vhodna napetost: 400 V, vhodni tok: 4 A, vhodna frekvenca: 50 Hz, Oprema: dokumentacija / priročnik, nožno daljinsko upravljanje, nujno zaustavitev, Naprodaj: Schechtl preklopni upogibni stroj MAX 200/CNC S-Touch Ponujamo vam priložnost za nakup visokokakovostnega preklopnega upogibnega stroja znamke Schechtl. Ta zmogljiv stroj je idealen za vse, ki se ukvarjajo z obdelavo pločevine in iščejo najvišjo natančnost ter učinkovitost. Podrobnosti o produktu: - Model: Schechtl MAX 200/CNC S-Touch Kedpfxsxzp Ans Af Todg - Leto izdelave: 2010 - Stanje: rabljeno - Tehnične specifikacije: Dolžina upogiba: 2.000 mm Jeklo: 2,5 mm Aluminij: 4,0 mm Inox: 1,5 mm Teža: 2.030 kg

Stanje: dober (rabljeno), Leto izdelave: 1990, Odvijalna, razrezna in navijalna linija za valjano kovino LTs. Linija 1300 mm/3 mm za natančen razrez. Za odvijanje, razrez kovine, rezanje na manjše trakove, navijanje v manjše svitke. Linija je bila kupljena nova, en lastnik, redno servisirana s strani predstavnikov LTs. Stroj je priključen in ga je mogoče kadar koli preizkusiti v Vilni, Litva. Rezalna linija LTs 1300/3 obsega: - Odvijalni decoiler - Multi-rezilne škarje - Ustavitveni in odrezni segment - Vrtilec z separatorjem - Voziček - Omarica z nadzorno ploščo Tehnične specifikacije: - Širina kovine: 1250 mm - Debelina: 700 mm - Minimalni premer: 508 mm - Maksimalni premer: 620 mm - Zunanji premer: 1200 mm - Največja teža: 7 t - Najmanjša širina rezanih trakov: 75 mm - Največja širina rezane kovinske trake: 1250 mm - Napetost: 3 x 380 V Kjdjpbwapopfx Af Tsdg - Moč: 18 kW - Proizvodnja: Poljska - Leto: 1990 Za dodatne informacije nas kontaktirajte.