Hidravlični stroj za luknjanje

MUBEA HP 1000

Stanje: rabljeno, Tlačna sila: 1000 kN Bedox Rbzdspfx Ag Tscw Globina grla: 760 mm Izbije na primer 40 mm odprtino v 22 mm jeklu Sprožitev hoda prek nožnega stikala Hitromenjalna naprava Nabor orodij je vključen v ceno 3000 kg

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Bedpou Aa I Sefx Ag Tscw Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity, solid St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogram capability: yes Machining Cycles Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stanje: dober (rabljeno), Leto izdelave: 2006,

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2012, številka stroja/vozila: 778 F 319, Laserski rezalni stroj Znamka: Prima Power Tip: Palatino 1530 Leto izdelave: 2012 Bcedpfx Agomx Rrle Tew Vključen dobavni obseg: Zračni filtrirni sistem z visokoučinkovitimi nanovlaknastimi filtri z dolgo življenjsko dobo in vodni hladilni sistem (KLIMA)

Stanje: novo, Leto izdelave: 2024, == Demonstration Machine == ALZMETALL Column Drilling Machine ALZSTAR 40 SV with coolant system B (Option 25) (consisting of separate tank (33 l), pump with motor protection switch, complete fittings) and LED machine lamp Standard equipment: Mushroom emergency stop, reversing switch (for right and left rotation), motor protection switch Stepless speed adjustment, digital speed display, feed overload protection, protection class IP54, plug connector spindle guard with electrical interlock Technical specifications: Drilling capacity steel E335 (St 60): 40 mm Thread cutting: Steel E335 (St 60): M 24 Cast iron EN-GJL-200 (GG20): M 30 Short taper: MK 3 Spindle stroke: 120 mm Reach: 293 mm Column diameter: 115 mm Machine table, usable area: 514 x 360 mm T-slots, number x width x spacing: 2 x 14 x 224 mm Distance spindle–table min./max.: 117/701 mm Feed: 0.10 + 0.20 mm/rev Machine height excl. options approx.: 1840 mm Net weight approx.: 285 kg Bsdpfx Agsd Hy Elj Tocw Drive: stepless Motor: 1500 / 3000 rpm Power: 1.45 / 1.9 kW Spindle speed: 160–2250 rpm

Stanje: skoraj kot novo (rabljeno), Donau Donauflex 135 hitrohodni radialni vrtalni stroj Proizvajalec: Donau Tip: Donauflex 135 Leto izdelave: 2020 Bjdpexcyz Rsfx Ag Tecw Stanje: Zelo dobro, rabljen, a kot nov Takoj na voljo iz zaloge.

Leto izdelave: 1963, Stanje: pripravljen za uporabo (rabljen), Load capacity: 18 t, lifting height: 10,750 mm, span: 23,000 mm, weight: 35.1 t. The machine has been regularly serviced and inspected. Bcedpfx Agsh I Edve Tsw

Stanje: rabljeno, Leto izdelave: 2016, številka stroja/vozila: 0605-240010, FICEP Flex FRC 1201 Notching System The Ficep FRC 1201 notching and cutting system is part of the modern Ficep Flex series of notching machines. This advanced CNC-controlled notching and cutting system is designed for the fast thermal cutting and notching of H, U, L profiles, flat bars, and square tubes. The steel profile is positioned precisely at the cutting location within the system by a pulling clamping measuring carriage via the roller conveyor. A robotic arm equipped with cutting units (oxy-fuel or plasma) cuts the profiles at the selected positions. The cut or notched finished components either fall into the collection tray or are pushed out of the system by the measuring arm. Thermal Cutting Units: The Ficep profile beam notching system Flex FRC 1201 is equipped for thermal cutting using both oxy-fuel and/or plasma technology. As the plasma power source, a Hypertherm HYPERFORMANCE PLASMA HPR 260 XD suitable for material thicknesses up to 32 mm is used. Thicker materials or bevel cuts greater than 32 mm are processed with the oxy-fuel cutting unit. Bodetwm Ubjpfx Ag Tecw Transport System: On the infeed side before the Ficep Flex FRC notching system, there is a chain drag cross transporter with a length of 11,150 mm. The profiles (workpieces) can be conveyed in both directions. Subsequently, the profiles are transported into the machine on a robust roller conveyor using a clamping measuring carriage. The system is designed for profiles up to 12 m in length and thus features 12 m roller conveyors with a conveyor width of 1,300 mm on both the infeed and outfeed sides. For the removal of finished components on the outfeed side, there are four chain drag cross transporters, each with a length of 6,450 mm, following the notching system. Mitrol CNC Control and Pegaso Software: The system is operated via a modern CNC control unit from Mitrol. The reliable CNC controller is manufactured by Ficep’s own supplier Mitrol and features Pegaso software, including remote maintenance capability and data transfer interface. Torit DCE Filter Unit The extraction filter unit for dust removal is supplied by Donaldson Torit DCE. Safety: Provided by fencing and light barriers Max. profile cross-section: 1,220 x 600 mm Min. material length: 2,500 mm Working height: 865 mm Weight: 7,000 kg Weight of burner unit cover: 1,200 kg This modern Ficep Flex FRC 1201 notching system is in very good condition.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Portalni žerjav Bollegraaf 30 ton, 32 metra, 10 metrov dvižne višine Bcjdpow S Ea Sofx Ag Tjw

Stanje: rabljeno, Leto izdelave: 1986, Kotna jekla 120 x 13 mm Prebijalni stroj: pritisk 60 t Prebijalni stroj: izložnost 510 mm Bedjt D Nz Aopfx Ag Tjcw Prebijalni stroj: kapaciteta (premer x debelina) Ø 27 v 17 mm Škarje za pločevino: ploščati material 500 x 14 mm Škarje za pločevino: ploščati material 400 x 16 mm Škarje za pločevino: ploščati material 180 x 20 mm Škarje za pločevino: ploščati material 120 x 21 mm Škarje za pločevino: ploščati material 100 x 22 mm Skupna električna moč 7,5 kW Teža stroja pribl. 2,5 t Dimenzije pribl. 1,8 x 0,9 x 1,8 m - Hidravlične škarje za profile – kombinirane -