Zbiralci Prahu nakup rabljenega (498)

Stanje: zelo dobro (rabljeno), filtrirna površina: 50 m², sesalna zmogljivost: 650 m³/h, negativen tlak: 38.000 Pa, High-pressure fume extraction unit, dust extractor, self-cleaning TEKA filter. Plasma and laser filter. Due to its design, the system is particularly recommended for processing oily or sticky fumes and dust. The unit is equipped with an automatic impregnation system for cartridge filters and an activated carbon filter for neutralizing odors generated during processing. The filter is cleaned pneumatically by compressed air pulses during operation, ensuring high device efficiency. The extraction unit is intended for special applications where the filtered fumes and dust may be humid and adhesive. The impregnating agent absorbs moisture from the fumes, protecting the filters from clogging. In this way, the lifespan of the cartridge filters is extended. After the cleaning process, the control system sends an impulse to the solenoid valve located on the upper cover of the drum filled with powder. The magnet pulse agitates the impregnation powder, which is then conveyed into the suction pipeline. The powder coats the filter surface, forming a protective layer for the filters. The unit is like new – only 126 operating hours! 7.5 kW turbine enclosed in a soundproof housing with a silencer. Capacity: 650 m³/h at a vacuum of up to 38,000 Pa! Filter surface area: 50 m² Inlet diameter: 100 mm Kjdporhidmsfx Abhjnd Includes pneumatic slide, silencer, and partial piping.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 2000 x 800 x 2500 mm Weight: 400 kg Total power requirement: 2.2 kW Dust extractor, compliant with H3 standard WIB-160 - 2 chip bins with clamping brackets - Residual dust content: 0.1 mg/m³ - On/off switch - Power consumption: 2.2 kW - Mains voltage: 400 V / 50 Hz / 3 phase - Filter area: 10.2 m² - 30 filter bags - Automatic filter cleaning with shaking motor - Dust bin volume: 2 x 70 l - Suction connection: 160 mm - Volume flow nominal: 1900 m³/h Kodpfx Abev A Hxyohend - Volume flow minimum: 1400 m³/h - Negative pressure: 2200 Pa - Max. sound pressure level: 72 dB(A) - Transport dimensions: L = 2000 mm, W = 800 mm, H = 2500 mm - Weight: 400 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 18133-00 12632868, vhodna napetost: 400 V, Nederman ventilation unit for extraction of paint dust, oil mist, and contaminated air Kodpfxew Hw Dgo Abhjnd

Stanje: novo, Description: Knjdovwflnopfx Abhjd Vacomat 140/160 XPe - The mobile dust extractor Vacomat 140/160 XPe is our smallest model and is ideal for single-machine extraction. Airflows of up to 1,593 m³/h can be conveyed using this negative pressure extraction system, e.g. for the extraction of panel saws, jointers, or thickness planers. - In the standard configuration, extraction is started manually at the touch of a button. Upon request, an automatic start of the fan can be installed so that extraction begins as soon as the connected processing machine is switched on. This prevents forgetting to activate extraction or unnecessary idling. - The dust and chip mixture is discharged into a dust-tight chip collection container (240 l) fitted with a plastic liner. A vacuum channel securely holds the plastic bag inside the collection container. Viewing windows make it easy to monitor the fill level. - The mobile extractor Vacomat 140/160 XPe automatically monitors its extraction performance via a pressure sensor and ensures maximum operational safety. Filter Cleaning - On the Vacomat 140/160 XPe, an integrated control panel activates an electric/mechanical shaking motor to clean the filter sleeves. Control is managed via feedback from the woodworking machine using potential-free contacts. Once all connected machines are switched off, the filter shaking process starts automatically. For this regeneration mechanism, no compressed air connection and thus no compressor is required. As a result, noise levels are significantly reduced during cleaning. - For very high and especially fine dust levels, an efficient pulse-jet filter cleaning option (XPe-D) is recommended (NOTE: Overall height +100 mm, length +280 mm). Filter cleaning using the compressed air tank is performed offline, after the extraction process. SCHUKOCONE FILTER - The mobile dust extractor Vacomat 140/160 XPe is supplied as standard with patented SchukoCone® filter sleeves. - The SchukoCone® filter is an innovative combination of an outside-loaded filter sleeve with an inside-loaded cone. This filter design offers approximately 60% more filter area with a smaller footprint. - SchukoCone® filter sleeves fully demonstrate their potential especially for fine dusts, where large filter area and low filter load are crucial. - Lower filter load results in a longer filter service life. A lower filter resistance means less fan output and, consequently, reduced energy consumption. ASSEMBLY & DELIVERY SCOPE - Mobile dust extractors of type Vacomat 140/160 XPe are delivered pre-assembled and ready to plug in (3-phase, 16 A, with 6.0 m cable) on a disposable pallet (included). A chip collection bag (size V) is also included. - The Vacomat 140/160 XPe must be connected electronically to the machine to be extracted, so that automatic regeneration of the filter sleeves is triggered once the processing machine is shut down. A certified electrician can help with this. The supplied control panel with integrated phase inverter is prepared for a potential-free contact query and three current transformer coils (coils not included). - With a flexible hose or a fixed pipeline...

Stanje: novo, Leto izdelave: 2021, New machine Year of manufacture: 2021 For wood dust and wood chips Designed for industrial/commercial use Motor: 2.2 kW IE3 Speed: 2874 rpm Extraction port: 160 mm Filter surface area: 9.21 m² Filter cleaning: pneumatic Sound pressure level: 73 dB(A) Rated air flow: 1,448 m³/h Knsdpfx Abeqrw Erehsd Vacuum: 2,247 Pa Chip collection volume: 2 x 165 l Dimensions (LxWxH): 1,755 x 830 x 1,654 mm Weight: approx. 274 kg Availability: short-term Location: Hochheim

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, filtrirna površina: 29 m², volumenski pretok: 6 m³/h, negativen tlak: 3,15 Pa, premer sesalne cevi: 300 mm, nazivni pretok: 5,8 m³/h, skupna masa: 790 kg, skupna širina: 1.250 mm, skupna dolžina: 2.840 mm, skupna višina: 2.470 mm, vhodna napetost: 400 V, raven hrupa: 68 dB, nazivna moč: 7,5 kW (10,20 KM), sesalna zmogljivost: 5,8 m³/h, vhodna frekvenca: 50 Hz, maks. debelina aluminijaste pločevine: 2 mm, trajanje garancije: 12 meseci, Exhibition demo unit, deduster with rotary valve, 1,500 mm length (disassembled in photo), including control panel. Star-delta start-up, frequency converter available upon request, including automatic extinguishing system (powder extinguisher). Knsdpfx Abowrnwuehsd - Immediately available -

Leto izdelave: 1999, Stanje: dober (rabljeno), DISA dust extraction unit, welding fume extractor, self-cleaning cartridge filter, pneumatic, vacuum-type for plasma, laser, sandblasting, soda blasting, shot blasting, plastics, catalyst applications, mineral processes, and all types of dry dust. The filter is pneumatically cleaned by compressed air pulses during operation, ensuring high efficiency of the unit. Fan installed on the clean air side, minimizing explosion risk. Ksdpfx Abehqd Tvehond Highly durable filter cartridges, moisture-resistant. Aluminized, antistatic, operating temperature up to 135°C. Fan power: 11 kW Airflow capacity: up to 8,000 m³/h Vacuum: up to 4,300 Pa Filtration surface area: 128 m²

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 3480 x 1100 x 2500 mm Weight: 900 kg Total power requirement: 5.5 kW Dust extractor, compliant with H3 standard JET-250 - 2 chip bins with clamping brackets - Residual dust content: 0.1 mg/m³ - On/Off switch - Power consumption: 5.5 kW - Mains voltage: 400 V / 50 Hz - Rated current: 32 A - Filter area: 23.5 m² - 60 filter bags - Automatic, pneumatic filter regeneration, JET system - Dust bin volume: 2 x 200 L, total 400 liters - Suction port: 250 mm - Nominal air flow: 5,400 m³/h Knodpjvz Hc Asfx Abhsd - Minimum air flow: 3,500 m³/h - Negative pressure: 2,800 Pa - Transport dimensions: L = 3,480 mm, W = 1,100 mm, H = 2,500 mm - Weight: 900 kg

Stanje: dober (rabljeno), Leto izdelave: 1998, Radial fan, dust extraction blower, fan, extraction unit, dust blower, blower, exhaust fan - Manufacturer: Eurovent, dust extraction blower radial fan type MPR 502 - Motor: AEG 5.5 kW 2860 rpm - Airflow volume: 3000 m³/h - Pressure: 3900 Pa - Connection: Inlet Ø 305 mm - Connection: Outlet 220 x 160 mm Knsdpfsrp Ii Uex Abhed - Base plate: 415 x 400 mm - Dimensions: 755/750/H770 mm - Weight: 100 kg

Stanje: novo, Exhibition machine Type A according to DIN EN 16770:2018 Without fire extinguishing system, tested in accordance with GS-HO-07 test principles of the BGHM. The dust extractor is a mobile extraction and filtration unit for industrial applications, designed for placement in the work area. The dust extractor is suitable for collecting, conveying, and separating dry wood, paper, or plastic chips and dust at various processing machines. Comprising a vacuum-resistant housing with suction nozzle and non-return flap, antistatic filter elements with jet-pulse cleaning, a high-performance radial fan with three-phase motor (energy efficiency class IE3) located on the clean air side, as well as integrated exhaust silencing and air outlet grille. Equipped with 2 swivel and 2 fixed castors, 2 chip containers with collection bags, and a control system with 5 m connection cable and CEE appliance plug. The control system is designed for automatic operation. Automatic start control for up to 6 machines and automatic filter cleaning with runtime extension are included. For automatic startup, either monitoring coils or volt-free machine contacts can be used. Single-coat PVC paint finish in RAL 9006 (white aluminum). Delivery in fully assembled, ready-to-operate condition. For filter cleaning, adequately prepared compressed air must be provided on-site (connection via plug nipple NW 7 / 6 bar). Technical data: Suction nozzle: Ø 250 mm Residual dust content: < 0.1 mg/m³ H3 Filter area: 21 m² Cleaning: Offline - compressed air jet pulse Compressed air supply: 6 bar (connection via plug nipple NW 7) Airflow: 4,500 m³/h Rated airflow (at 20 m/s at the suction nozzle): 3,530 m³/h Negative pressure (at suction nozzle, rated airflow): 2,700 Pa Sound pressure level MAX (distance to unit 1m): 67 dB (A) Fan motor: 5.5 kW, 230/400 V, 50 Hz, 3,000 rpm, IP 54 Operating mode: continuous, intermittent Collection drum volume: 2 x 165 l Dimensions (L x W x H): 2,130 (2,540) x 900 x 1,962 mm Weight: approx. 705 kg Accessories: 1 frequency converter 5.5 kW for the fan of the SMU dust extractor, manufacturer Eaton (Item no. 114004) with control integrated into the dust extractor’s control panel to maintain constant airflow during filter saturation, including safe fan shutdown during filter cleaning. Individual adjustment of suction pressure / airflow as required. The converter increases system efficiency, saves energy, and reduces wear on materials and machinery. Technical features: - Motor rating 5.5 kW, - Integrated PID controller, - Automatic energy optimization, - Integrated manual/automatic changeover, - Commissioning menu for rapid parameter setup, - Integrated radio interference filter according to EN 55011-1B, - Synchronization with freely rotating motor shaft, - Including pressure transducer 0-50 mbar (pressure cell). 1 slide valve control for 1 – 8 processing machines (Item no. 113197) Activation of up to 8 electro-pneumatic shut-off valves in the extraction ductwork at the respective processing machines, triggered by volt-free contacts or monitoring coils on the machines. Kjdevwfu Nopfx Abhend 8 monitoring coils STWA1 (Item no. 600668) for contact monitoring at the processing machines, suitable for all STW types.

Stanje: rabljeno,

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, Drying system / dryer suitable for various materials such as powders, granulates, etc. - Control system for temperature regulation Knedsqu R Naopfx Abhod This machine is connected and ready for testing in our machinery hall.

Leto izdelave: 1998, Stanje: dober (rabljeno), Sawdust extractor, dust extraction unit, self-cleaning negative pressure filter ALKO ECO JET The filter is cleaned pneumatically with compressed air pulses during operation, ensuring high unit efficiency. Kodpfxeiu Hq De Abhsnd It is perfectly suited for all types of dry dust in various technological processes. Filter bags can be exchanged according to specific requirements and applications. Year of manufacture: 1998 5.5 kW fan positioned on the clean air side, which minimizes the risk of explosion initiation. Inlet diameter: 250 mm Capacity: 4,320 m³/h Filtration surface: 29 m² Vacuum: 3,700 Pa "Fireman" extinguishing system Air return ATEX-certified safety flap Fire protection flap Noise damper "Fireman" extinguishing system Control cabinet with automation for starting up to 8 machines Technical documentation included Extractor dimensions: Height: 3.05 m Base width: 2.75 m x 1.00 m

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 5470 x 1100 x 2500 mm Weight: 1100 kg Total power requirement: 11 kW Dust extractor, conforms to H3 standard JET-350 - 4 chip bins with clamping brackets, 600 x 500 mm - Residual dust content: 0.1 mg/m³ - Including powder fire extinguisher - On / Off switch - Power input: 11.0 kW - Mains voltage: 400 V / 50 Hz - Current draw: 32 A - Filter area: 45.2 m² - 120 filter bags - Automatic, pneumatic JET filter regeneration system - Bin volume: 4 x 200 L, total 800 litres - Suction nozzle: 350 mm - Airflow rate: 8640 m³/h Ksdpfxjvz E Nhs Abhjnd - Negative pressure: 3600 Pa - Dimensions: L = 5470 mm, W = 1100 mm, H = 2500 mm - Weight: 1100 kg

Leto izdelave: 2002, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WA150-07-01, ZNIŽANO - PRODATI MORA DO KONCA NOVEMBRA - NOV STROJ NA POTI Kodpfoxcn Aiox Abhend 150kW Ranheat peč na lesno biomaso s sistemom za odsesavanje prahu in silosom. Popolnoma nov krmilni panel z ekstraktorjem (vrednost 33.000 €), ki upravlja stroje, cevovode in avtomatska vrata. Prodaja zaradi nadgradnje.

Stanje: rabljeno, Dimensions (Length/Width/Height): 1400/2000 x 1400 x 3000 mm Connection diameter: 2x 220 / 1x 180 mm with 14 suction nozzles pneumatic slide valve control fan discharge negative pressure system in compact design Ksdpfsvwfu Aex Abhend with 12 built-in automatic slides used, in good condition Manufacturer: ALKO Type: FU-2-12-800-70-III-A No.: 910225 Length: 1400 / 2000 mm Width: 1400 mm Height: 3000 mm 12 x suction nozzles D 180 with slide valves 2 x suction nozzles D 220 without slide valves cladding shaking device with discharge via fan complete control system air recirculation return/exhaust air D approx. 500 mm with 2 fans 0.9 + 3.0 kW pole-changing motors each 1450 / 2800 rpm Location: 97447 Gerolzhofen Handover in current condition, free loaded without guarantee or warranty

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, obratovalne ure: 450 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 21.1605, 21.1702, 21.1600, 21.1682, vrsta vhodnega toka: trifazni, Kompletna linija za pranje, sušenje i uklanjanje vlakana i prašine s krutih plastičnih materijala, kapaciteta 1,5–2 t/h uključuje: - bazen za pranje sustavom potapanja (sink-float) - horizontalnu trenjem perilicu - mehanički čistač i sušaru - zig-zag separator i sustav za punjenje u big-bag vreće - električnu upravljačku ploču za cijeli sustav Dijelovi u dodiru s vodom izrađeni su od nehrđajućeg ili kaljenog čelika. Knodpfxjwpm U To Abhed Strojevi (bazen za pranje i horizontalna trenjem perilica) opremljeni su ljestvama i platformom za inspekciju, te omogućuju instalaciju s obje strane. Također, strojevi u liniji mogu se zakretati jedan prema drugome, pa linija može biti postavljena kao I, L ili U oblik. Linija je potpuno funkcionalna, vrlo malo korištena, kupljena za projekt koji nije realiziran.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Le nekaj ur delovanja. Miza mora biti priključena na zunanji odsesovalnik prahu. Kedjw T Sicjpfx Abhjnd Dostavljamo po celotni EU.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, filtrirna površina: 21 m², volumenski pretok: 3,2 m³/h, skupna masa: 770 kg, skupna širina: 900 mm, skupna dolžina: 2.360 mm, skupna višina: 2.000 mm, vhodna napetost: 400 V, raven hrupa: 67 dB, priključek za stisnjen zrak: 6 letvica, premer ekstrakcijske šobe: 200 mm, moč: 4 kW (5,44 KM), The SPÄNEX deduster type SMU 32 / 45 BA with container and discharge unit is a compact disposal station designed for commercial use and installation within the workspace. Consisting of: deduster with vacuum-tight housing, suction nozzle and backdraft damper, antistatic filter elements with jet pulse cleaning, high-performance radial fan arranged on the clean-air side with three-phase motor (energy efficiency class IE3), integrated exhaust silencer, and air outlet grille; feed container with 0.55 kW discharge unit; control unit with CEE device plug (phase inverter). Knjdpfjt Ug Sgsx Abhod The control unit is designed for automatic operation. The automatic start-up control for up to 6 machines and automatic filter cleaning with runtime extension are included. For automatic start-up, either pickup coils or potential-free contacts from the machine can be used. Optional: Conversion to chip collection container € 1,270.00 net Alternatively: Installation of a used rotary valve € 1,690.00 net

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 4590 x 1100 x 2500 mm Weight: 1,000 kg Total power requirement: 7.5 kW Dust extractor, complies with H3 standard JET-300 - 3 chip containers with clamping bracket 600 x 500 mm - Residual dust content: 0.1 mg/m³ - On/off switch - Power consumption: 7.5 kW - Mains voltage: 400 V / 50 Hz - Current consumption: 32 A - Filter area: 35.32 m² - 90 filter bags - Automatic, pneumatic filter cleaning – JET system Knsdpsvz E Iqefx Abhsd - Dust container volume: 3 x 200 liters - Inlet nozzle: 300 mm (right-hand side) - Nominal air flow: 6,000 m³/h - Minimum air flow: 5,100 m³/h - Negative pressure: 3,400 Pa - Transport dimensions: L = 4,590 mm, W = 1,100 mm, H = 2,500 mm - Weight: 1,000 kg

Stanje: delavnici obnovljeno (rabljeno), Rated motor power: 2.2 kW / 5.2 A Ksdpfxov Azcys Abhend Rated voltage: 380 V / 50 Hz / 3-phase Rated air flow: 1350 m³/h Rated negative pressure: 2850 Pa Main switch + start and stop Manual filter cleaning Extraction nozzle: 140 mm 1 container, diameter 800 mm

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, Nominal volumetric flow rate V_nom 750 m³/h, extraction nozzle D=100 mm, minimum volumetric flow rate V_min 565 m³/h, negative pressure 14.5 mbar, motor 1.1 kW, rated speed 2860 rpm, connection 380V 3Ph 50Hz Knjdpjv Azfzefx Abhed

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 25-28/2018, nazivni pretok: 2.500 m³/h, skupna širina: 750 mm, skupna dolžina: 2.000 mm, skupna višina: 1.980 mm, priključek za stisnjen zrak: 6 letvica, moč: 3 kW (4,08 KM), SPÄNEX dust extractor, model SMU 25 Connected load: 380V, 5.6A, 3kW Weight: approx. 400 kg Mobile design Extraction nozzle: 180 mm Nominal airflow: 2,500 m³/h Kjdpfotwp Nzox Abhend Operating mode: manual/automatic Electro-pneumatic filter cleaning Pneumatic connection: 6 bar Dimensions (HxLxW): 1980 x 2000 x 750 mm

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1995, Connected load 380V 2.2kW Suction nozzle 200 mm Mobile 2 x chip collection bins, each 190 l Knedpfxovz Uhys Abhjd Airflow rate 2500 m³/h Dimensions (H x W x L): 2160 x 830 x 1900 mm

Stanje: rabljeno, Power connection: 480V, 4kW Filter surface area: 15.8 m² Nominal air flow: 3,200 m³/h Minimum air flow: 2,262 m³/h Extraction connection: Ø 200 mm Kodpfx Asvz U Srebhond Weight: approx. 550 kg Dimensions (LxWxH): 2,400 x 900 x 2,100 mm