Weiler Cnc 160 nakup rabljenega (177)

Stanje: rabljeno, Leto izdelave: 2000, Použitý soustruh CONDOR AC, čiastočne repasovaný Výška hrotu: 165 mm Vzdialenosť medzi hrotmi: 750 mm Priemer vretienového otvoru: 40 mm Otáčky vretena: 22–2 800 ot./min plynule nastaviteľné - Rýchloupínací držiak Multifix, veľkosť B - Digitálny odmeriavací systém WEILER DZ-V - Priechodný doraz vretena - Pevná luneta - 7 kusov Multifix držiakov - Plochý ochranný kryt proti rozstrekovaniu - Elektricky istený kryt skľučovadla - Prevodové kolesá a rôzne upínacie čeľuste Stroj je čiastočne repasovaný: - Lôžkový suport: Vodiace dráhy nanovo potiahnuté a zaškrabané, klinové lišty a upínacie lišty prispôsobené - Priečny suport na ložiskovom suportoch zmeraný a nastavený. Priečny suport s rybinovým vedením novo zaškrabaný, kliny prispôsobené a zaškrabané - Horný suport novo zaškrabaný, klinová lišta prispôsobená - Všetky odmeriavacie pravítka repasované, káble vymenené Lredpfx Abox E Um Nebjg Stroj sa nachádza v našom showroome v 71334 Waiblingen-Beinstein a je ihneď k dispozícii. Ohľadom vybavenia nás prosím kontaktujte.

Stanje: rabljeno, številka stroja/vozila: 11756, Used lead and feed screw lathe WEILER LZ 280 Centre height: 125 mm Centre distance: 800 mm Spindle speeds approx. 26–2000 rpm Includes: - 1 x three-jaw chuck Ø 125 mm with both internal and external jaws, brand new - Multifix size A with 2 tool holders - Emergency stop / switch unit, rear chip guard - All change gears available, driver plate - Tray, machine lamp, new power socket - 15 collets from Ø 3.5 to 18.5 mm, collet clamping tube Lsdovd Dbnspfx Abbjrg - Fixed centre and MK 2 sleeve for clamping tube - Bed stop, chuck guard, various turning tools and operating manual Machine is located at our premises in 71334 Waiblingen-Beinstein and is immediately available. Inspection of the machine is possible by appointment.

Stanje: rabljeno, številka stroja/vozila: 1717, used lead and feed screw lathe WEILER PRAKTIKANT Centre height: 140 mm Centre distance: 500 mm Spindle bore: 36 mm Spindle speeds: 42–2,000 rpm Equipped with RSF 3-axis digital readout, 1 piece 3-jaw chuck Ø160 mm, Chuck guard with electrical interlock, Multifix tool post size A with 3 holders Lrjdpfx Abjuqb Emebjg Lever-operated collet chuck system with 15 collets. The machine is located at our site in 71334 Waiblingen-Beinstein and is available immediately. Viewing by appointment is possible.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 36 mm, višina središča: 155 mm, stružna dolžina: 800 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 25 obr/min, used centre lathe Weiler Condor, No. 7939, Centre height: 155 mm Centre distance: 800 mm Spindle speeds: 12–2800 rpm Spindle bore: 36 mm Accessories: 1x 3-jaw chuck RÖHM, Ø 160 mm, Multifix base unit size B with 2 inserts, keyless drill chuck, live centre, and coolant system. Lodpfx Aev R Tdxebbjrg The machine is located in our warehouse in 71334 Waiblingen-Beinstein and is available immediately.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1990, obratovalne ure: 51.392 h, skupna višina: 1.700 mm, skupna masa: 1.300 kg, This Weiler E30 was manufactured in 1990. A robust horizontal lathe featuring a spindle bore of 42 mm and a swing over bed of 330 mm. It supports a wide range of threading options, from metric to DP threads, and includes a Multifix tool post size B. Ideal for precise and versatile turning operations. Contact us for further details regarding this machine. Additional Equipment • Multifix tool post size B installed • Fixed steady rest (option) clamping range: 15–100 mm • Travelling steady rest (option) clamping range: 10–85 mm • Collets from 3 mm (in 0.5 mm increments) • Tailstock with a MT3 taper Machine Advantages Technical Specifications • Drive power 100%/60% duty cycle: 9/11 kW • Max. spindle torque: 180 Nm Ledpfjyaimfjx Abbjrg • Total speed range: 1–4500 rpm • Feed drive: three-phase AC feed motor • Longitudinal feed range: 0–20 mm/rev • Rapid traverse longitudinal/cross: 10/7.5/5/3.5 m/min • Quill diameter: 50 mm • Quill stroke: 110 mm • Quill internal taper: MT3 Additional Information Swing over cross slide: 160 mm Bed width: 240 mm Cross slide travel: 180 mm Saddle guideway length: 395 mm Tool section (height/width): 20 × 20 mm Spindle nose according to DIN 55027 size 5 Front bearing spindle diameter: 70 mm Main spindle internal taper: MT5 Workpiece: Metric thread pitch range: 0.1–400 mm Imperial thread pitch range: G/1" 1/4–56 Module thread range: mm DP thread range: 1–224 G/" Maximum number of threads: 50 Dimensions Machine depth 1800 mm

Stanje: rabljeno, Tour CN + CP VOEST ALPINE - WEILER type DA 210 / 1 No de machine : 1-004/2581 Année de fabrication : 1984 Distance entre pointes : 1000 mm Diamètre de rotation au-dessus du banc : 420 mm Hauteur de pointe au-dessus du banc : 210 mm Diamètre de rotation au-dessus du chariot transversal : 220 mm Hauteur de pointe au-dessus du chariot transversal : 120 mm Alésage de broche : 52 mm Vitesse de broche : 33 - 1500 tr/min, 12 positions Bride de mandrin : cône court DIN 55027 taille 6, 4x M12 Cône intérieur de la contre-pointe : CM 4 Puissance du moteur : 5,5 kW Branchement : 380 Volt, 50 Hz - Vitesse de broche sur 12 plages via boîte d'engrenages - Mandrin autocentreur 3 mors AROWA Ø 200 mm (un seul jeu de mors) - Porte-outils à changement rapide Multifix taille B avec 3 cartouches interchangeables - Avance automatique longitudinale et transversale - Dispositif de refroidissement Ledjyah Rvopfx Abbsrg - Frein de broche - Arrêt d'urgence - Carénage anti-projections - Lunette fixe Ø 160 mm - Lampe machine - Notice d'utilisation Encombrement L x l x h : 2200 x 1200 x 1450 mm Poids : 1500 kg Très bon état

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C, NEWLY Refurbished with acceptance protocol certifying tolerances to new-machine standards Technical Data: >> Machine No. 1824 >> Centre height: 180 mm >> Centre distance: 1,000 mm >> Spindle speeds: from 13 to 2,000 rpm >> Spindle bore: 56 mm >> Short taper spindle nose DIN 55029 size 5 >> Tailstock: MT 4 >> Feeds: 0.026 to 0.888 mm/rev >> Threads possible: metric, inch, module, and diametral pitch >> Metric thread pitches: 0.35 to 12 mm >> Weight approx. 1,500 kg >> Spindle brake switchable >> Drive power: 2.0/4.0 kW >> Length: 2.2 m, Height: 1.5 m, Depth: 1 m Accessories and Equipment: >> 3-axis digital readout from K&C, new, 12 months manufacturer's warranty with operating manual Features: switching mm/inch, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, direction of counting selectable >> 3-jaw chuck with wedge bars, nearly new, 200 mm, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle guard >> Spindle brake >> 2 emergency stop buttons Optional: Lead and feed screw covers About the Machine: Offered is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The guides have been newly ground or scraped. Certification to inspection protocol. Painted in 2K high-gloss white. All accessories, including Multifix and chuck, are new. Lrjdpfx Abjvrcqdobsg Safety: The machine features a brake motor, electronic spindle guard, and two emergency stop buttons – making this an as-new lathe. The Weiler runs very smoothly even at high speeds. This newer generation of Weiler lathes is highly user-friendly and allows you to produce ground-quality surfaces. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout (K&C), Fully Refurbished to Factory Tolerances with Inspection Protocol for New Machine Tolerances Technical Data: >> Machine No.: 2020 >> Centre Height: 180 mm >> Centre Distance: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Camlock Spindle Nose DIN 55029 Size 5 >> Tailstock Taper: MK 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Thread Cutting Capabilities: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: from 0.35 to 12 mm >> Weight: approx. 1500 kg >> Spindle Brake (switchable) >> Motor Power: 2.0/4.0 kW >> Dimensions: Length 2.2 m, Height 1.5 m, Depth 1 m Accessories and Equipment: >> 3-axis digital readout by K&C, brand new, 12-month manufacturer warranty with user manual Features: Conversion mm/inch, coordinate selection ABS/INC, value halving, reference mark, 200 tool programming slots, taper calculation, radius/diameter, one-touch zeroing, count direction switching >> 200 mm 3-jaw scroll chuck with soft jaws (almost new), 1 set of jaws >> Multifix size B with 2 tool holders, NEW >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle guard >> Spindle brake >> 2 emergency stops Lredpovrckqofx Abbeg Optional: Lead and feed screw covers available on request About the Machine: For sale is a Weiler Commodor lead and feed screw lathe in geometrically refurbished condition. The guideways have been newly ground and scraped. Inspection executed according to test protocol. 2K glossy white paint. The Multifix tool post and chuck are new. Safety features include a braked motor, electronic spindle guard, and two emergency stop switches, making this lathe in absolutely as-new condition. The machine runs very smoothly even at high spindle speeds. This latest generation of Weiler lathes is highly user-friendly and capable of producing ground-like surface finishes. You are welcome to inspect the machine under power on-site and verify its condition for yourself.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus Lead and Feed Screw Bench Lathe – Excellent Condition !!! Technical Data: >> Machine No. 2801 >> Center Height: 120 mm >> Distance Between Centers: 430 mm >> Spindle Speed: 60 - 3000 rpm in 18 gear steps >> Spindle Bore: 23 mm >> Short Taper Spindle Nose DIN 55027 >> Tailstock Morse Taper: MK 2 Lredpfov Tyzcex Abbog >> Feeds from 0.03 to 0.15 mm/rev >> Possible Threads: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches from 0.25 to 2.5 mm >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> 1 pc Röhm 125 mm three-jaw chuck with 4 sets of jaws >> Collet system with collets from 2 mm to 12 mm in 1 mm increments, including drawbar >> Multifix size A with 4 tool holders >> Change gears >> Fixed steady rest >> Faceplate >> Spindle guard >> Clamping tools About the Machine: Offered is a Weiler Primus lead and feed screw bench lathe in very good condition. The machine is, of course, fully functional. All carriages move very smoothly and evenly. The Weiler runs quietly, even at high spindle speeds. This Primus comes from a government facility where it saw little use. This newer generation of Weiler lathes is very user-friendly and capable of producing ground-like surface finishes. Take the opportunity to inspect the machine under power on site and convince yourself of its condition. (The base cabinet is included; the machine is not bolted to it.) Digital readout available at additional cost.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Weiler Matador VS-2 Lead and Feed Screw Lathe Technical Data: >> Year of manufacture: approx. 1970, Machine No. M1012 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speeds: 30 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock taper: MT 3 Lsdpfxjvv Etve Abbsrg >> Feeds from 0.010 to 1.184 mm/rev >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 15 mm >> Weight: approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> Collet chuck system with 32 collets (set is incomplete) and mount >> 1 three-jaw chuck including a set of jaws >> 1 four-jaw chuck including a set of jaws >> Multifix size A with 2 tool holders >> Change gears >> Bed stop About the Machine: Offered is a used Weiler Matador VS-2 in fully functional condition. You are welcome to inspect the machine under power on-site to verify its condition for yourself.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Engine Lathe Model Condor B, Lead and Feed Screw Lathe with K&C 3-Axis Digital Readout NEW Geometrically overhauled with inspection protocol for new machine tolerances! Technical Data: >> Machine No. 90-1495 >> Center height: 165 mm Lsdpovambcofx Abbsrg >> Center distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Camlock Spindle Nose DIN 55027 Size 5 with bayonet lock >> Tailstock MT 3 >> Feeds from 0.015 to 0.46 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Switchable spindle brake >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Equipment and Features: >> New K&C 3-axis digital readout, 12 months manufacturer's warranty with operation manual Functions: switching mm/inch, coordinate selection ABS/INC, display value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck system, NEW collets from 3 to 26 mm in 1 mm increments >> 160 mm three-jaw chuck with 2 sets of jaws, NEW >> Multifix quick-change toolpost, size A, with 2 tool holders, NEW >> Bed stop >> Electric chuck guard NEW >> LED machine lamp NEW >> Rear safety cover >> Operating manual >> Coolant system >> Machine feet About the machine: For sale is a Weiler Condor B lead and feed screw lathe in a geometrically overhauled, like-new condition. All guides have been newly ground or hand-scraped. Delivered with a test protocol upon acceptance. This is an excellent machine with electronic spindle protection. All accessories such as collets, chuck, and Multifix toolpost are new. Spindles, spindle nuts, bearings, belts, and wipers have been replaced. Take the opportunity to inspect this machine under power at our site and convince yourself of its condition.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with K&C 3-Axis Digital Readout (NEW) Geometrically overhauled with an acceptance report certifying tolerances compliant with new machine standards. Technical Data: >> Machine No.: 84-121 >> Centre Height: 165 mm >> Centre Distance: 750 mm >> Spindle Speeds: 22 to 2800 rpm >> Spindle Bore: 40 mm >> Camlock Spindle Nose DIN 55027 Size 5 with bayonet lock >> Tailstock Morse Taper: MK 3 >> Feeds: 0.015 to 0.46 mm/rev >> Thread Cutting: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle Brake (switchable) >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Lodpfx Abowrm Dtebsrg Equipment and Accessories: >> 3-axis digital readout from K&C (new), 12 months manufacturer's warranty, operating manual included Functions: mm/inch selection, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, fast zeroing, selectable counting direction >> NEW collet chuck, NEW collet set 3–26 mm in 1 mm increments >> 160 mm 3-jaw chuck with 2 sets of jaws (NEW) >> Multifix (Quick-Change Toolpost) Size B (NEW) with 3 tool holders >> Bed stop >> Electrical chuck guard (NEW) >> Rear splash guard >> Operating manual >> Coolant system >> Machine levelling feet About the Machine: A Weiler Condor 81 lead and feed screw lathe is being offered in excellent, geometrically overhauled condition. The slides have been newly ground or hand-scraped. Delivered with an inspection protocol. The accessories, collets, and chuck are all new. For safety: The machine is equipped with a braking motor, electronic spindle guard, and two emergency-stop buttons—a lathe in as-new condition. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is extremely user-friendly and capable of producing surfaces comparable to grinding. Take the opportunity to view and test the machine under power on site to convince yourself of its condition.

Stanje: rabljeno, L + Z Lathe WEILER Type LZ PRIMUS GS Machine No. 2461 Year of manufacture approx. 1990 Centre distance: 400 mm Lrodpfjrtd Uwox Abbsg Swing over bed: 250 mm Centre height over bed: 125 mm Swing over cross slide: 140 mm Centre height over cross slide: 70 mm Spindle bore: 24 mm Spindle speed: 60 - 3000 rpm, 18 steps Feed: longitudinal and cross Chuck flange: short taper DIN 55022 Size 4 Tailstock taper: MT 2 Drive power: 1.1 kW and 1.5 kW, pole-changeable Power supply: 380 Volt, 50 Hz - 3-axis digital readout FAGOR, Type 30i-T-B - Spindle speed via 2 motor speeds and 9 gearbox steps - 3-jaw chuck RÖHM Ø 125 mm with stepped jaws - QUICK-CHANGE TOOLPOST MULTIFIX with 1 insert cartridge - Collet set Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 / mm - 1 centring tip for collet chuck - Emergency stop - Folding chuck guard - Splash guard - Machine lamp - Electrical diagram - Machine mounted on a steel plate (Steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Required floor space (L x W x H): 1200 x 900 x 1560 mm Weight: 520 kg Good condition

Stanje: dober (rabljeno), Leto izdelave: 2000, Ref. št.: 10623 Proizvajalec: WEILER Tip: E90 x 4500 Leto izdelave: 2000 Vrsta krmiljenja: CNC Krmilnik: SIEMENS D1 – cikli Lokacija zaloge: Halberstadt Država izvora: Nemčija Širina postelje: 600 mm Dolžina struženja: 4500 mm Premer vrtenja nad posteljno sani: 900 mm Vrtina vretena: 128 mm Največji navor: 6000 Nm Podajalna sila - Z: 20000 kN Podajalna sila - X: 20000 kN Hitrost hitrega pomika: 10/5 obr/min Premer pinole konjička: 140 mm Hod pinole konjička: 300 mm Mere stružnega noža: 32 x 25 mm Premer sprednjega valjčnega ležaja: 178 mm Premer vrtenja nad prečnikom: 530 mm Vretena glava po DIN 55027 (velikost): vel. 11 Konjiček notranji stožec: MK 6 / tip 140 Dolžina stroja: 6900 mm Lrodpsyagiwofx Abbjg Širina stroja: 2600 mm Višina stroja: 2150 mm Teža stroja pribl.: 10,5 t

Stanje: rabljeno, L + Z stružnica WEILER tip Condor 81 A Stroj. št.: 36553 Leto izdelave cca 1985 Razdalja med konicama: 750 mm Premer struženja nad posteljo: 330 mm Višina konice nad posteljo: 165 mm Premer struženja nad suportom: 180 mm Višina konice nad suportom: 90 mm Premer vretena: 40 mm Lsdpok S Ht Ajfx Abbsrg Priklop čeljusti: kratki stožec DIN 55027 št. 5 Konica v konjičku: MK 3 Pomik puše konjička: 110 mm Hitrost vretena: 45 - 2800 vrt/min, 16 stopenj Pogonska moč: 3 kW Omrežni priklop: 400 Volt, 50 Hz - Hitrost vretena v 16 prestavah - 3-čeljustna stružna glava Ø 160 mm RÖHM z vrtalnimi in stružnimi čeljustmi - Hitromenjalni nosilec rezila Multifix velikosti B s 3 vložki - Avtomatski vzdolžni in frontalni pomik - Elektromehanska zavora vretena - Nujna zaustavitev - Rezervoar za hladilno tekočino s črpalko v podstavku stroja, brez napeljave do delovnega območja - Zložljiv varnostni pokrov čeljusti - Zaščita pred brizganjem - 1 kos vrtljiv centrirni koničnik - Električna shema in navodila za uporabo Mere D x Š x V: 1850 x 950 x 1400 mm Teža: 1100 kg Dobro stanje

Stanje: dober (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 160 mm, izvrtina vretena: 36 mm, premer struženja: 300 mm, višina središča: 150 mm, širina na sredini: 500 mm, skupna dolžina: 1.500 mm, skupna širina: 800 mm, skupna višina: 1.300 mm, največja hitrost vretena: 3.550 obr/min, hitrost vretena (min.): 15 obr/min, skupna masa: 1.000 kg, Konvencionalni precizni stružni stroj z vpenjalno napravo za klešče, višina konic 150 mm, razdalja med konicama 500 mm, premer izvrtine Ø 36 mm, 18 hitrosti vrtenja 15 - 3550 min⁻¹, motor 3 kW, oprema: naprava za hlajenje, vpenjalna naprava za klešče, 3-čeljustna glava, vrtalna glava, stružni konjiček, hitromenjalni držalo RAPID s 5 vložki, strojna svetilka, vzdolžni prislon, mere 150x80x130 cm, teža ca. 1000 kg. Lredpex Urmlefx Abbsg

Stanje: rabljeno, Swing diameter over bed / mm Swing diameter over cross slide / mm Lrodewgi Tmjpfx Abbsg Turning length / mm

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 40 mm, višina središča: 160 mm, stružna dolžina: 650 mm, največja hitrost vretena: 3.000 obr/min, hitrost vretena (min.): 20 obr/min, največja hitrost vrtenja: 3.000 obr/min, vrtljajska hitrost (min.): 20 obr/min, skupna masa: 800 kg, nosilec vretena: MK 3, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Availability: on request Centre height: 160 mm Centre distance: 650 mm Spindle bore: Ø 40 mm Spindle speed: 20–3000 rpm, stepless Tailstock taper: MT3 Quill travel: 85 mm Lrodpovnrzqofx Abbeg Longitudinal feed range: 0.020 – 0.630 mm/rev Cross feed range: 0.006 – 0.200 mm/rev Possible thread types: Metric, Inch, Module, Diametral Pitch Metric thread pitches: 0.25 – 8 mm Spindle brake: switchable Voltage: 400 V Dimensions: approx. 1.58 x 0.9 x 1.5 m (L x H x W) Additional equipment and accessories: 3-axis digital readout, coolant system, chuck guard, 3-jaw chuck, and further accessories available on request...

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 40 mm, višina središča: 140 mm, stružna dolžina: 500 mm, največja hitrost vretena: 4.000 obr/min, hitrost vretena (min.): 30 obr/min, največja hitrost vrtenja: 4.000 obr/min, vrtljajska hitrost (min.): 30 obr/min, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Distance between centres: 500 mm Centre height: 140 mm Spindle bore: 40 mm Spindle speed: 30 - 4000 rpm Weight: approx. 800 kg Ledpfxovnr E Ns Abbjrg Dimensions: approx. 1430 x 935 x 1550 mm Accessories: operation manual, lamp, Multifix tool holder, collet chuck device (at extra charge) Further accessories available on request

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 40 mm, višina središča: 140 mm, širina na sredini: 500 mm, največja hitrost vretena: 4.000 obr/min, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Dear Sir or Madam, For sale is a WEILER Primus VC lathe. This model series is particularly distinguished by the Siemens control panel and its fully stepless speed regulation. As the name suggests, the VC can operate with constant cutting speed. The machine has undergone a comprehensive inspection in our workshop and is in excellent geometrical, technical, and visual condition. All guides are in good order, the gearboxes run smoothly and quietly, and the levers shift easily. We would be pleased to invite you to test the Primus VC on site at our facility. We look forward to your inquiry! Availability: immediate Centre height: 140 mm Centre distance: 500 mm Spindle bore: Ø 40 mm Tailstock taper: MK3 Quill stroke: 85 mm Thread types: Metric, Imperial, Module, Diametral Pitch Metric thread pitches: 0.25 - 8 mm Spindle brake: engageable Voltage: 400V Dimensions: approx. 1.50 x 1.00 x 1.50 m (LxHxW) Weight: approx. 700 kg Further equipment and accessories: Siemens control panel, coolant system, chuck guard, leadscrew and feed shaft cover, emergency stop, operating manual, CE declaration of conformity, and much more available on request... Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are at least workshop-tested - All lubricants and any worn parts are replaced in advance Lodpfoyalurex Abbjrg - On request, we can completely or partially overhaul your chosen machine - On request, the chosen machine can be repainted in your desired colour - On request, you can order additional accessories such as tools directly - On request, we can fit further accessories such as safety devices - We are happy to arrange shipment and/or on-site installation for you

Stanje: dober (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 200 mm, izvrtina vretena: 54 mm, premer struženja: 410 mm, širina na sredini: 950 mm, višina središča: 200 mm, največja hitrost vretena: 3.000 obr/min, skupna masa: 2.100 kg, Oprema: dokumentacija / priročnik, Dear Sir or Madam, For sale is a CNC cycle lathe of the type WEILER E35. Thanks to the Siemens 805 cycle control and the electronic handwheels, operation is very simple and extremely comfortable. The machine has been thoroughly inspected in our workshop, is fully functional, and can be tested under power at any time. We look forward to your inquiry! Our service promise to you: - We are a certified master craftsman’s business specializing in mechanical engineering - All machines are thoroughly checked Lrodpfx Ajyalulebbog - All lubricants and, if necessary, worn parts are replaced in advance - Upon request, we can completely or partially overhaul the machine of your choice - You are free to choose the color of your selected machine - Upon request, you can order additional accessories, such as tools, directly - On request, we can also install further accessories such as safety devices for you - We are happy to arrange shipping and/or installation for you

Stanje: pripravljen za uporabo (rabljen), Na voljo je visoko precizen stružni stroj Weiler. Višina konice: 155 mm, razdalja med konicama: 800 mm, hitrost vrtenja: 2800 vrt/min, vretenina izvrtina: 36 mm. Dimenzije stroja X/Y/Z: pribl. 1800mm/800mm/1500mm, teža: pribl. 900kg. Dokumentacija je na voljo. Možen je ogled na kraju samem. Lrodpfxjya Hxxe Abbeg

Stanje: rabljeno, Leto izdelave: 2009, Technical details: Swing diameter: 800 mm Turning length: 4,500 mm CNC control: 840-3 Swing diameter over cross slide: 510 mm Cross slide travel: 410 mm Bed width: 480 mm Spindle nose: DIN 55027 Gr. 11 Spindle bore: 106 mm Speed range: 1–1,800 rpm Quill diameter: 115 mm Quill taper: MK 6 Quill stroke: 225 mm Total power requirement: 37/30 kW Space requirement approx.: 6,500 x 2,500 x 1,950 mm Machine weight approx.: 8,000 kg 1 used precision cycle-controlled lathe WEILER E 80 x 4500 incl. SIEMENS SINUMERIK 810D/WEILER D3 CNC control Equipped as follows: - 3-jaw chuck - 700 mm steel faceplate - Steady rest - PARAT tool post - Chip conveyor - Extraction system - Reinforced coolant pump - Spindle brake Manufacturer's description: Bed: - Torsionally rigid bed made of high-quality cast iron - Hardened and precision-ground guideways - Bolt-on box-type bed feet with openings for chip conveyor Headstock: - High accuracy and rigidity of main spindle achieved by precision angular contact ball bearings - Single lever shift for 2 mechanical gearbox stages - Circulating lubrication with separate oil pump, oil reservoir, and pressure switch Carriage: - Long, continuous cross slide with adjustable gib strip - Slideways coated with anti-friction material, cross slide guideway hardened - Longitudinal and cross feed driven by adjustable three-phase drives connected to - Precision ball screws with preloaded nuts - Feed and rapid traverse via cross selector lever - Electronic handwheels with incremental selector switch - Automatic central lubrication of guideways and spindle nuts - Tool post mounting for quick-change tool post, size C - Safety shift lever for main spindle left/right rotation Tailstock: - Easy positioning via spring-loaded relieving rollers and manual carriage coupling - Quill movement by handwheel with adjustable scale ring - Quill internal taper with anti-rotation device and ejector slot Control: - Siemens Sinumerik 810D control with user-oriented Weiler software “D3” - 12.1" TFT color flat screen - Teach-in functions - Graphically assisted contour programming with automatic intersection calculation Lrodpfx Aoyb R Exsbbjg - V24 interface - Network card - 3.5" floppy disk drive - Additional full foil keyboard with short-stroke keys

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Swing diameter 330 mm Turning length 750 mm Control WEILER D3 Quill diameter 50 mm Quill stroke 130 mm Tailstock quill taper MK-3 Spindle speeds 1-4500 rpm Main spindle taper MK-5 Machine weight approx. 1,400 kg Space requirement approx. 1,900 x 1,300 x 1,800 mm This WEILER E30x750 is in very well-maintained condition and can be inspected at the seller's premises by prior arrangement. - Lever-operated quick-change chuck for collets according to DIN 6343-48/173E and Rubber-Flex collets, clamping range 3-42 mm diameter, with mechanical and electrical locking, max. speed 4,500 rpm. - 1 set of collets according to DIN 6343-48 / 173E - Adjustable hollow spindle stop 38-48 mm for main spindle - Traveling steady rest with sliding jaws, through-hole 10-85 mm - Three-jaw chuck with wedge bar system, diameter 160 mm, bore 42 mm, mount according to DIN 55027 size 5, including 1 set of master jaws and 1 set of reversible hard top jaws - Lever-operated quick-change chuck for collets according to DIN 6343-48/173E and Rubber-Flex collets, clamping range 3-42 mm diameter, with mechanical and electrical locking, max. speed 4,500 rpm. - 1 set of collets according to DIN 6343-48 / 173E Lsdpfx Ajx Szpwjbbsrg - Adjustable hollow spindle stop 38-48 mm for main spindle

Stanje: rabljeno, Leto izdelave: 1997, Stružnica Weiler E70/3 NC s krmilnikom Siemens CNC, triodjelni vpenjalni tulec 400 mm, premer obdelave nad posteljo 780 mm, 4-pozicijski hitroizmenljivi nosilec orodij, maksimalna hitrost vretena 1800 obr/min, konjiček, razdalja med konicama 3000 mm. Serijska št. 136 (1997) - CE oznaka Ljdpfox Trzyex Abberg Opomba: Ti stroji se nahajajo v Ferrari, Italija. Vsa vsakršna orodja so na voljo izključno tako, kot je opisano.