Wallace Brusilni Stroj nakup rabljenega (28.204)

Stanje: rabljeno, Leto izdelave: 1998, Funkcionalnost: nepreverjeno, številka stroja/vozila: 2183, potovalna razdalja osi X: 500 mm, pomik osi Y: 300 mm, pomik po osi Z: 450 mm, največja hitrost vretena: 60.000 obr/min, model krmilnika: GE Fanuc Series 16-M, Pas de prix de réserve – vente garantie à la meilleure offre ! DÉTAILS TECHNIQUES Course axe X : 500 mm Course axe Y : 300 mm Course axe Z : 450 mm Vitesse de broche max. : 60 000 tr/min Vitesse de broche min. : 9 000 tr/min Avance axe X : 2 000 mm/min Avance axe Y : 2 000 mm/min Avance axe Z : 900 mm/min Plage de vitesse de levée : 0,5 – 14 000 mm/min (en continu) Dimensions de la table : 600 x 380 mm Charge maxi sur la table : 300 kg Porte-outil : pinces EX 19, arbres de meulage E19 DÉTAILS DE LA MACHINE Modèle de commande : GE Fanuc Série 16-M Tension d’alimentation : 400 V Tension de commande : 24 V Puissance absorbée : 7 500 W Fréquence d'entrée : 50 Hz Dimensions & Poids Dimensions (L x l x H) : 4 250 x 4 000 x 3 250 mm Poids total : 4 500 kg ÉQUIPEMENTS Csdoyl U Nvopfx Afnogp Documentation / manuel Installation d’aspiration Système de refroidissement Turbine d’étanchéité

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Working width: 1,100 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,120 x 1,900 mm Variable feed speed: 2.6 – 13 m/min Feed motor power: 1.10 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 1,705 x 1,545 x 1,905 mm 1st Unit: Steel contact roller, Ø 160 mm Motor power: 15 kW, 400 V, 50 Hz 2nd Unit: Combination unit, rubber-coated contact roller (Sh 65), fixed sanding pad Motor power: 11 kW, 400 V, 50 Hz Abrasive belt cleaning by compressed air 3rd Unit: Cleaning brush Multifunction display Multifunction lever (conveyor belt, workpiece thickness adjustment) Electronic abrasive belt oscillation Pneumatic oscillation of conveyor belt Motorised workpiece thickness adjustment with LED display in 0.1 mm steps Units with emergency brake device Emergency stop button at infeed & outfeed Motor protection switch Roller table extension at infeed with 2 idler rollers Automatic star-delta starting Complete documentation Note for used machines: • Technical data subject to change and prior sale. • Prices quoted are ex-works and refer to collection only – loaded free of charge! • The machines have been cleaned and function tested. • All machines are sold as seen, without any warranty whatsoever. The buyer is welcome to inspect the machines at the location. Cjdpsychqzefx Afnogp • Special agreements are only valid in written form. (Enquiries will only be answered if you provide your address and telephone number!)

Stanje: zelo dobro (rabljeno), Working width: 1360 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,360 x 1,900 mm Variable feed speed: 7 - 14 m/min Feed motor power: 1.1 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Cjdpoych Igofx Afnegp Compressed air supply: 6 bar Dimensions (L x W x H): 2160 x 2260 x 2025 mm Weight: approx. 2200 kg 1st unit: Steel contact roller Motor power: 15 kW, 400 V, 50 Hz 2nd unit: Sanding pad, rigid for fine sanding of solid wood & pneumatically timed sanding pad for veneer 3rd unit: Cleaning brush Abrasive belt oscillation with limit switch Conveyor belt oscillation, pneumatic Motorised thickness adjustment with LED display Units with emergency brake system Emergency stop button at infeed Roller table extension at infeed Complete documentation Note on used machines: • Technical details and prior sale subject to change. • Prices quoted ex site – loaded free of charge! • The machine has been cleaned and tested for functionality. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to enquiries with your address and telephone number!)

Stanje: dober (rabljeno), Leto izdelave: 1992, Single-piece sanding machine Cgedpfowyda Usx Afnjp Sanding from above & below Electric height adjustment with digital display Infinitely variable feed speed Star/delta start Pneumatic belt tensioning Main switch Sanding belt oscillation Finish brushing unit above and below, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Including infeed and outfeed roller conveyor, L = 1600 mm, non-driven Note on used machines: • Subject to technical changes and prior sale. • Stated prices are ex-works – free loading at location! • The machines have been cleaned and function tested. • All machines are sold as seen, with no warranty whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements are only valid if made in writing. (Inquiries will only be answered with your address and telephone number!)

Stanje: rabljeno, Kündig Topiq-1100 Švicarski kakovostni izdelek STROJ S KONSTANTNO MIZO / avtomatska nastavitev glave Širokopasovni kalibracijsko-finiš brusilni avtomat Kombinirani agregat kontaktni valj in brusna blazinica z elektronsko krmiljenim segmentnim brusnim čevljem Cgsdpfxoyngxho Afnep Moč pogonskega motorja traku cca 11 kW Nivo kontaktnega valja brezstopenjsko nastavljiv glede na skalo zrn Delovna širina 1100 mm Podajalna hitrost 3 - 15 m/min, brezstopenjsko nastavljiva Avtomatika nastavitve debeline obdelovanca ENORMATIC hitra nastavitev Izbira programa preko upravljanja SmartSelect Stroj je DELAVNIŠKO PRENOVLJEN v ZELO DOBREM STANJU Na zalogi Lieboch

Stanje: rabljeno, Viet Target 211 A Širokopasovni brusilni stroj Cgjdpfxjym T Igj Afnop 1. agregat: valjčni agregat 2. agregat: brusilni čevelj Delovna širina: 1100 mm Delovna višina: 4–160 mm 2 hitrostni pomika Glavni motor: 11 kW Dodatna valjčna miza pri vhodu in izhodu Leto izdelave: 1995 Stroj je FUNKCIONALEN in v DOBREM STANJU Na lokaciji

Stanje: novo, Leto izdelave: 2022, Bandwidth: 150 mm Belt length: 3000 mm Table size: 960 mm x 352 mm Cjdpfjgr Ufhox Afnsgp Auxiliary table: 330 mm x 330 mm Veneer sanding attachment: yes Oscillation: yes Tilting sanding unit: yes Extraction connection: 120 mm Motor power: 3 kW Machine length: 1900 mm Machine width: 810 mm Weight: 290 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Band width: 150 mm Belt length: 2170 mm Table size: 1440 mm x 710 mm Veneer sanding unit: yes Csdjhpmahopfx Afnegp Oscillation: yes Tilting table: yes, 0°–45° Extraction connection: 120 mm Motor power: 3 kW Machine length: 1440 mm Machine width: 800 mm Weight: 530 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Band width: 150 mm Band length: 2400 mm Veneer sanding unit: no Oscillation: yes Roller diameter: mm Sanding unit tiltable: yes / 90° - 0° Worktable: 730 x 300 mm Auxiliary table: 420 x 400 mm Belt speed: 14 m/sec Extraction connection: 120 mm Motor power: 1.8 kW / 400 V Machine length: 1480 mm Machine width: 680 mm Cjdpfshpmadex Afnsgp Weight: 160 kg

Stanje: novo, Leto izdelave: 2022, Belt width: 150 mm Belt length: 2740 mm Veneer sanding unit: no Oscillation: yes Roller diameter: 115 mm Sanding unit tiltable: yes / 90° - 0° Worktable: 900 x 305 mm Auxiliary table: 290 x 260 mm Belt speed: 16 m/sec Extraction port: 100 mm Motor power: 3 kW / 400 V Cedpfohq A H Djx Afnogp Machine length: 1540 mm Machine width: 750 mm Weight: 220 kg

Stanje: novo, Leto izdelave: 2022, Band width: 150 mm Band length: 3000 mm Table size: 960 mm x 352 mm Cedpfx Afogtdpuonsgp Auxiliary table: 330 mm x 330 mm Sanding drum diameter: 60 mm / 100 mm / 120 mm Veneer sanding device: yes Oscillation: yes Tilting sanding unit: yes Extraction connection: 120 mm Motor power: 3 kW Machine length: 1900 mm Machine width: 900 mm Weight: 310 kg

Stanje: rabljeno, Rabljeni stroj Leto izdelave: 1987 Oprema in tehnični podatki: - Pnevmatska brusilna enota - Hitromenjalni brusilni čevelj - Velikost mize 2800 x 1250 mm - Maks. uporabna brusna dolžina med stebri stroja 2600 mm Cgodoyq T H Dspfx Afnjp - Brusna širina pri prečnem gibanju mize 1000 mm - Prehod pod trakom, električna nastavitev višine mize 340 mm - Motor 5,5 kW - Izmenični stikalo za levi/desni tek traku - Hitrost traku 22 m/s - Dimenzije traku 7800 x 150 mm - Odsesavanje na levem delu stroja 1,1 kW, pretok zraka 1800 m³/h - Priključek za odsesavanje 180 mm Potrebni prostor 3950 x 2300 mm Teža 900 kg Razpoložljivost: kratkoročno Lokacija: 63934 Röllbach

Stanje: zelo dobro (rabljeno), !!!DEMONSTRACIJSKI STROJ!!! Naprodaj je skoraj nov brusilni stroj JET DDS-237 z največjo širino brušenja 940 mm. Stroj je v zelo dobrem stanju, obnovljen in preverjen s strani našega strokovnega osebja. (Popolnoma funkcionalen) Cgsdpex Sqzvsfx Afnjp Tehnični podatki: -Dvojvaljni brusilni stroj JET DDS-237 -Motor 400 V / 7,5 KM -Hitrost brusilnega valja 1.400 min⁻¹ -Hitrost podajanja 3 m/min -Maks. širina brušenja 940 mm -Debelina brušenja 0,8 do 133 mm -Minimalna dolžina obdelovanca 230 mm -Brusilni valj vsak 152 x 940 mm -Širina brusnega traku 75 mm ali 100 mm -Odvodna priključka 2 x premer 100 mm -Dimenzije (D x Š x V): 1.090 x 1.420 x 1.090 mm -Teža 440 kg Stroj se nahaja v A-8561 Söding in je na voljo za ogled in prevzem kadar koli v skladu z našim delovnim časom. Možnost predhodne prodaje! Sorodni izrazi: stebrni vrtalnik, namizni vrtalni stroj, sveder Referenca: R-D1618

Stanje: rabljeno, BIESSE SAND REGAL 1350 je industrijski širokotrak brusilni stroj, namenjen za kalibracijo in fino brušenje ploščatih kosov v pohištveni in ploščni industriji. Serija REGAL predstavlja robustno proizvodno rešitev, primerno za srednje in velike proizvodne obsege. Stroj je zasnovan modularno in omogoča kombinacijo kalibracijskih ter končnih obdelovalnih operacij v enem prehodu, kar občutno poveča produktivnost. Cgedsynb Rfspfx Afnsp

Stanje: rabljeno, Number of sanding units: 4 pcs Sanding width: 190 mm Max. sanding height: 4–180 mm Weight: 4200 kg Hess Expert 4-Belt Single-Piece Wood Sander Ø Sanding from below and above Ø Each with 2 staggered sanding units (top and bottom) Ø Sanding units (top and bottom) connected in series according to the precision planing principle Ø Pre-sanding with coarse grit (calibration) Cgedpfxjt Tqy Eo Afnjp Ø Fine sanding with fine grit (finish) Ø Central motorized height adjustment of the lower sanding units Ø Central motorized and synchronous height adjustment of the complete upper sanding and brushing units, including the upper transport units Ø Oscillating belt use (during the sanding process) Ø Absolute power transmission via 5.5 kW motors and large dimensioned drive drums Ø Oxide-ceramic sanding shoe for - precise surface geometry - no readjustment required - permanent dimensional accuracy - completely maintenance- and wear-free Basic structure: Stable, heavy welded construction made of thick-walled rectangular profiles with additional, statically calculated stiffeners for optimal vibration damping. Staggered sanding units with large-diameter belt drive drums for slip-free belt tracking. Dual-point extraction for direct and airborne dust with sealing brushes and integrated sanding belt air-blast device to extend belt service life. Sanding units in robust steel plate construction serve as the base for vibration-damped, smooth belt operation. Absolutely backlash-free guidance by ball-type linear sets made of hardened and ground shafts. Height adjustment of the sanding units via hardened and ground special linear guides and preloaded carriage units. Long-term precision is ensured by dust and dirt protection of the ball linear sets and carriage units. Large-diameter presanding rollers as contact drums. Contact drums and sanding shoes are balanced relative to the sanding belt grit stress. The oversized drive drums guarantee the full power transmission of the 5.5 kW sanding motors to the sanding belt, ensuring slip-free, stable running and optimal heat dissipation, allowing for maximum material removal. Automatic machine stop in the event of belt breakage. Optical display at the control panel and via signal light on the machine. Sanding shoes for finishing are entirely maintenance- and wear-free, made from oxide-ceramic with optimal heat dissipation. Belt tensioning is provided by appropriately sized compression springs. Belt release for belt change is done via a pneumatic unit for gentle and distortion-free installation of new belts. The upper sanding and brush units are centrally and motor-driven height adjustable, with digital display at the control panel for motorized sanding thickness adjustment. Brush and finishing device, for improved surface finish, is integrated into the base machine. Two vertically arranged special brush rollers, 150 mm Ø, run in the direction of feed. Separate height adjustment of the brush rollers on precision carriage guides allows adjustment for wear compensation. An additional transport roller is provided for ejecting or further transporting the workpiece from the sanding machine, linked to the conveyor belt. Wood guiding at the infeed area for hard, double-sided...

Stanje: zelo dobro (rabljeno), Krmiljenje SIEMENS 840D Cjdpfeyrhl Rjx Afnogp Opis sledi!

Stanje: novo, Leto izdelave: 2022, Band width: 150 mm Band length: 2600 mm Oscillation: yes Sanding rollers for curves: 1 Tiltable sanding unit: yes Table size: 750 mm x 290 mm Extraction port: 120 mm Motor power: 3 kW Machine length: 1700 mm Cgedpfoiuld Dsx Afnep Machine width: 700 mm Weight: 180 kg

Stanje: zelo dobro (rabljeno), Ravna brusilni stroj Scledum model RVA300 z magnetom 430 x 220 mm, segmentni brusilni disk premera 300 mm. Cgedpfx Ajxw Ikvofnsp

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, številka stroja/vozila: 153, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 100 h, Širokopasovni brusilni stroj, ki je bil uporabljen za brušenje jeklenih pločevin. Delovna širina: 1300 mm Delovna višina: 0,5 do 160 mm Največji izmet materiala: 0,3 mm/m Premer jeklenih ščetk: 200 / 300 mm Premer filc ščetk: 200 / 300 mm Premer brusnih plošč: 150 mm Število brusnih plošč: 12 Dolžina brusnih trakov: 1900 / 2200 mm Hitrost brusnih trakov: 18 m/s Hitrost vrtenja plošč: 12 m/s Nazivna napetost: 400V Moč motorja: 15 kW Codoylbi Aopfx Afnegp Potreba po zraku: 6 bar Poraba zraka: 20 - 1100 NL/min Premer izpušnih cevi: 2 x 150 mm Raven hrupa: 96 dB Dimenzije (D x Š x V): 1600 x 1900 x 2200 mm Teža: 1800 kg (z dvema enotama)

Leto izdelave: 2022, obratovalne ure: 2.737 h, stanje: rabljeno, številka stroja/vozila: 110000503, Grinding wheel speed: up to 120 m/s, workpiece weight: up to 80 kg, control system, manufacturer: SIEMENS/MARPOS, type: Sinumerik/P7. 1 automated workpiece unloading station, manufacturer: JOVI, type: 1113A, year of manufacture: 2022, own weight: approx. 300 kg. 1 air filtration unit, manufacturer: IFS, type: VARIO M 2000, serial no.: 568113, year of manufacture: 2022, own weight: approx. 120 kg, connected load: 400/460 V, 50/60 Hz, 0.7 kW, 1.7/1.6 A. 1 water cooling unit, manufacturer: HASCH, type: MCW-50CT-17AUZ1-3407C, serial no.: 1001220302582, year of manufacture: 2022, own weight: approx. 150 kg, tank volume: approx. 15 l. 1 coolant filtration system, manufacturer: MICRONFILTER, type: Easy 250/KMT350, serial no.: 0201, year of manufacture: 2022, tank volume: approx. 2,300 l, connected load: 400 V/50 Hz, 5.34 kW. 1 immersion cooler, manufacturer: HASCH, type: MCS-120ST-05AOP6R7S6UZ1-3407C, serial no.: 1003220400836, year of manufacture: 2022, own weight: approx. 206 kg. 1 coolant tank, manufacturer: MICRONFILTER, type: VR200L/MIN-150L, serial no.: 0201, year of manufacture: 2022, tank volume: approx. 150 l, connected load: 400 V/50 Hz, 1.1 kW. 1 magnetic separator, manufacturer: MICRONFILTER, type: KMT350, serial no.: 0212. 1 loading unit, manufacturer: DANOBAT, type: rotary table lift, serial no.: 3810490908, year of manufacture: 2022, own weight: approx. 170 kg, max. load capacity: approx. 230 kg. 1 rotary table trolley. Codpfx Afeyn Nlqenegp

Leto izdelave: 2023, obratovalne ure: 1.376 h, stanje: rabljeno, številka stroja/vozila: 180073, Swivel range: approx. 200 mm, machining length travel: approx. 100 mm, number of axes: 3 axes (X/Y/Z), control system: SIEMENS Sinumerik, air filter unit: IFS IFMC 1800, year of manufacture: 2021, serial no.: 565760-02, cooling unit: HYFRA E-Chilly 5-400V-S, year of manufacture: 2022, serial no.: 10129303PC01240522, cooling capacity: approx. 5,480 m³/32° Celsius, hydraulic unit: LEHMANN UMT KSS0119, year of manufacture: 2022, net weight: approx. 610 kg, comprising: 1 cooling unit HYFRA TRK-Chilly-45-EF-S, year of manufacture: 2022, serial no.: 10132616PC01290722, 1 chip conveyor LEHMANN UMT FB100, year of manufacture: 2022, serial no.: AUF007093-1, net weight: approx. 80 kg, 1 magnetic unit LEHMANN UMT VMA 100S GM WA, year of manufacture: 2022, serial no.: AUF007093-1, net weight: approx. 60 kg, 1 two-door steel cabinet JOTKEL, contents: various consumables. Cedpfx Afjyn Nldonegp

Leto izdelave: 2018, obratovalne ure: 28.658 h, stanje: rabljeno, številka stroja/vozila: 18E400239, Through-feed grinding capacity Ø: 10 cm, plunge-cut grinding capacity Ø: 15 cm, weight: 9,000 kg, FANUC 0i-MF control, 2 YASKAWA handling robots YR-MH005LS-E000, serial numbers: R17507-979-3 / R19033-789-1, Automation system/workpiece storage EGS Automation Tschudin, year of manufacture: 2018, serial number: 180100, 4-fold, oil cooling and filtration system ARO, year of manufacture: 2018, serial number: PRA0032086, safety guard. Cedpfxsyn Nk Hs Afnogp

Leto izdelave: 2022, obratovalne ure: 7.315 h, stanje: rabljeno, številka stroja/vozila: 100644, Maximum grinding wheel diameter: approx. Ø 915 mm, maximum workpiece diameter: approx. Ø 440 mm, maximum workpiece weight: approx. 250 kg, maximum grinding wheel speed: approx. 80 m/s, operating pressure: approx. 6 bar, control system, manufacturer: DANOBAT/SIEMENS/MARPOS, type: Sinumerik/P7, 1 automated workpiece removal station JOVI 1113B, year of manufacture: 2022, net weight: approx. 300 kg, 1 air filtration unit IFS M 1600, year of manufacture: 2022, serial no.: 567663, net weight: approx. 85 kg, connected load: 380-460 V, 50/60 Hz, 0.7 kW, 1.5-2.1 A, 1 hydraulic unit REXROTH Deposito HE-16120, 1 coolant filtration unit MICRONFILTER Easy 250/KMT350, year of manufacture: 2022, serial no.: 0201, tank capacity: approx. 2,300 l, connected load: 400 V/50 Hz, 2.44 kW, 1 immersion chiller HASCH MCS-120ST-05AOP6R7S7UZ1-3405C, year of manufacture: 2022, serial no.: 1003220300954, net weight: approx. 206 kg, 1 magnetic separator MICRONFILTER KMT350, serial no.: 0211, 1 tool loading unit, DANOBAT rotary table lift, year of manufacture: 2022, serial no.: 3130490901, net weight: approx. 350 kg, max. load capacity: approx. 360 kg. Cgjdpfx Afeyn Nlwonjp

Leto izdelave: 2021, obratovalne ure: 5.475 h, stanje: rabljeno, številka stroja/vozila: 100000736, max. distance between centers: 60 cm, max. grinding diameter: 44 cm, max. workpiece weight: 500 kg, control system: SIEMENS Sinumerik/Balance Systems VM25, handling robot: YASKAWA YR-1-06VXH12-A00, year of manufacture: 2022, serial number: 6V2272528290001, automation system/workpiece storage: EGS Automation Danobat CG600-BL1, year of manufacture: 2023, serial number: 190605-6, double version, filter: 3FS M1600, no.: 565209, year of manufacture: 2021, weight: 85 kg, oil band filter: MICROFILTER Easyband 150, serial number: 0202, year of manufacture: 2021, pump: REXROTH HM-46, safety enclosure Cedjyn Nk Tspfx Afnsgp

Stanje: zelo dobro (rabljeno), Heavy-duty double-sided edge sanding machine, oscillating Motor power approx. 3.0 kW Oscillation with separate motor approx. 0.2 kW Sanding belt dimensions: 3000 mm x 200 mm Front sanding table: 980 x 340 mm Rear sanding table: 750 x 300 mm Space requirement (L x W x H) approx.: 1800 x 1500 x 1000 mm Weight approx. 600 kg Front sanding table with veneer edge sanding device Rear sanding table infinitely adjustable in angle Angle stop on the rear worktable Oscillation via geared motor Cgedpsuxqzuofx Afnjp Pneumatically height-adjustable sanding beam Interchangeable radius sanding discs Pneumatic, adjustable belt tensioning Extraction with blower Possible attachment of feed device 2 side support tables for radius sanding Note on used machines: • Errors in technical details and prior sale excepted. • Quoted prices are ex works—free loading at location! • Machine has been cleaned and function tested. • All machines are sold as inspected, without any claim to warranty. Buyers are welcome to inspect machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)