Wa Zasilni Tehnologije Gmbh nakup rabljenega (71.130)

Leto izdelave: 2024, stanje: pripravljen za uporabo (rabljen), The heat exchangers are part of the system and were merely ordered separately. The initial purchase price of the system was therefore over EUR 2 million. The official commissioning took place in April 2024, however, this only involved trial runs and not continuous operation. Technical Data – Modular Chamber Furnace System for Homogenizing Aluminium Billets (Used System) Machine type: Modular chamber furnace system with heat recovery Intended use: Homogenization (heat treatment) of aluminium billets in batches Design: Electrically heated chamber furnaces with jet heating and air circulation, heat exchanger furnaces, charging machine, racks System Configuration Podpfxjyt Ihbs Agxogk The system essentially consists of: • 1 preheating furnace (BSN 1607) – electrically heated, jet heating • 2 holding furnaces (BSN 1608, 1609) – electrically heated, air circulation • 2 heat exchanger furnaces (BSN 1610, 1611) – unheated, with air circulation • 1 charging machine (BSN 1612) – electric/hydraulic • 12 charging racks (BSN 1614) • Switchgear with PLC control (Siemens S7 1515F 2PN, Profinet) and operator panel • Contact thermocouples for direct billet temperature measurement The system is designed as a complete machine in accordance with Machinery Directive 2006/42/EC (CE compliant). For further information, please refer to the attached PDF.

Stanje: novo, Leto izdelave: 2025, obratovalne ure: 30 h, Panel benders (also known as swivel bending machines or folding machines for sheet metal) are used across numerous industries where precise, automated bending of sheet metal components is required. The key sectors include: 🏭 Metal and Sheet Metal Processing Pgodpfjyb Hu Nex Agxsk - Contract manufacturers / sheet metal processing companies - Series and single-part production - Enclosures, claddings, cassettes, boxes 🚗 Automotive Industry & Suppliers - Structural and body components - Brackets, covers, interior components - Especially suited for series production with high repeatability ⚡ Electrical Engineering & Electronics - Control cabinet and distribution enclosure construction - Housings for control systems, servers, industrial electronics - Frequently used due to the many 90° bends and complex contours ❄️ Household Appliances & White Goods - Washing machines, refrigerators, ovens - Inner frames, covers, housings 🏗️ Construction Industry & Architecture - Façade elements - Roof and wall claddings - Metal panels, cassettes 🚆 Transport & Traffic - Railway vehicles, buses, commercial vehicles - Interior claddings, technical enclosures 🛠️ Mechanical and Plant Engineering - Machine frames - Safety covers - Control cabinet housings 🌬️ HVAC / Air Conditioning Technology - Ventilation ducts - Air conditioner housings - Air guidance systems 🏥 Medical Technology - Equipment housings - Stainless steel claddings - High requirements for precision and surface quality Why panel benders are used in these industries: ✔ High degree of automation ✔ Excellent repeatability ✔ Ideal for complex bent components ✔ Gentle processing of painted or coated sheets ✔ Fast for small to medium batch sizes

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 30 h, ✅ 1. Metalworking companies with medium to high batch sizes 🔹 Series production / repeat parts If you produce many identical or similar parts, automation pays off because it reduces the cost per part and delivers consistent quality. 🔹 High production volumes > 1,000 parts/month The higher the output, the quicker the investment pays off through increased productivity. ✅ 2. Companies facing a shortage of skilled labor or high workloads 🔹 Difficulty finding or retaining qualified staff A robot can partially substitute skilled operators and secure your production capacity. Pgedpoyb I Azsfx Agxsk 🔹 Night shifts / 24/5 production Robots can work longer and without fatigue → higher output without extra staff. ✅ 3. Operations with complex bending processes or high quality requirements 🔹 Tight tolerances / avoiding small errors Robotics ensure consistent repeatability. 🔹 Complex secondary operations (e.g., handling, deburring, stacking) An integrated robot can take over tasks that are otherwise done manually. ✅ 4. Manufacturers under tight time or cost pressure 🔹 Demanding short delivery times Automation reduces lead times. 🔹 Cost pressure due to competition Longer machine utilization and lower part costs boost your competitiveness. ✅ 5. Companies focused on future viability 🔹 Industry 4.0 / Digitalization An automated press brake can often be integrated more efficiently into IT/MES systems. 🔹 Scalable production If you plan to grow in the future, you have a flexible foundation.

Stanje: novo, Leto izdelave: 2025, Plasma cutting system for tubes and profiles Pjdegu Nmhspfx Agxsgk Machines for plasma cutting of pipes and profiles. The cutting contour is defined and created using CAM software. The generated CNC code is then transferred to the machine via USB or network. The program can be easily accessed via the 12" touch display. After the workpiece is manually loaded, the automatic cutting process is started. - Pipe length: max. 6000 mm - For round pipes up to max. OD=220 mm - For square tubes up to max. 152.4 x 152.4 mm (6" x 6") - Maximum pipe weight: 250 kg - 4-jaw chuck - Side loading possible, secured with light curtain - Fully automatic cutting process - Industrial PC control with 12" touch display - Data import via USB and LAN - Power consumption (machine): 400V 3P 2KW - Dimensions: 690 x 100 x 180 cm - Weight: approx. 1000 kg Made in Germany The pictures show an older machine.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Plasma cutting system for pipes and profiles Machines for plasma cutting of pipes and profiles. The cutting contour is defined and created via the CAM software. The generated CNC code is then transferred to the machine via USB or network. The program can be accessed easily via the 12" touch display. After manually loading the workpiece, the automatic cutting process is started. - Pipe length: max. 6000 mm - Suitable for round pipes up to max. OD = 150 mm - Suitable for square pipes up to max. 101.6 x 101.6 mm (4" x 4") Pgsdpfx Aeg Dvdcjgxjk - Maximum pipe weight: 150 kg - 4-jaw chuck - Side loading possible, secured by light curtain - Fully automatic cutting cycle - Industrial PC control with 12" touch display - Data import via USB and LAN - Power supply for machine: 400V 3-phase, 2 kW - Dimensions: 690 x 100 x 180 cm - Weight: approx. 800 kg Made in Germany The pictures show an older, larger machine.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Mandrel Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5xD Pgsdpfxjtr U Hle Agxsk → Maximum bending capacity, tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity, tube 30 x 30 x 3 mm → Maximum bending capacity, tube 42.4 x 2 mm (stainless steel VA 0.2 260 N/mm²) → Total connected load 3 kW → Tube feed-in length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control system's touch display allows for easy and intuitive programming and operation of the machine. After the tube is inserted, it is fixed in place by the chuck in the carriage, ensuring precise positioning and permitting the production of dimensionally accurate geometries. Standard features also include a tube geometry check before the bending process: if the bending process is started at the wrong position, the machine will not release the bending operation—misoperation is prevented. Optional additional features increase comfort, boost output, and thus enhance the system’s efficiency. Data exchange with the optional TBS-3D pipe calculation software (PC version) is done via USB stick or network. Existing tube geometries can be imported using the software. Standard features: → Servo drive on bending axis, 1.5 kW → Adjustable rotation speed → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 120 mm → Bending shaft diameter 50 mm → Servo-driven feed → Servo-driven rotation → Three-jaw chuck for clamping the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping force → Programmable early mandrel retraction PLC control: → 10" colour touchscreen → ETH 10/100, X2X Link, 2x USB → Foot switch operation → Data transfer via LAN or USB → Material database Unique graphical programming: Simple geometries can be calculated directly at the machine. After entering length and angle, the controller automatically calculates the feed values and bending angles. Power supply: 400V 16A Dimensions: L: 2.3 m x W: 1 m x H: 1.4 m Weight: approx. 1200 kg

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, Manual tube bender HRB-3D 850 For bending tubes and solid material up to max. 12 mm Precise and repeatable bending is ensured by three battery-operated digital displays, which show the bending angle, tube feed, and tube rotation accurately. - 3-jaw chuck, 80 mm - Stop system for feed - Feed length approx. 850 mm The manual tube bender should be securely mounted on a workbench or frame (not included in the scope of supply). Pedottagdepfx Agxjgk We would be pleased to provide you with a detailed offer if you send us your complete company address along with email and contact person.

Stanje: rabljeno, Leto izdelave: 2017, Premer cevi (maks.): 80 mm, dolžina vpenjala: 4.500 mm, Mandrel Bending Machine S8004 ----- For the production of dimensionally accurate tube geometries with bending radii of up to 1.5XD → Maximum bending capacity, tube: 76 x 4 mm (400 N/mm²) → Maximum bending capacity, tube: 60 x 60 x 3 mm (400 N/mm²) → Maximum bending capacity, tube: 76 x 2.9 mm (stainless steel) → Total connected load: 7 kW → Tube loading length: 4.5 m Robust and durable steel construction in a rigid, force-locking design – no twist-prone construction resulting from, for example, split design of bending head and mandrel carrier. Maintenance-free electromechanical drive for the bending axis. The control’s touch display enables easy and intuitive programming and operation. After inserting the tube, it is fixed by the chuck in the carriage, ensuring precise tube positioning and thus the production of dimensionally accurate geometries. The standard equipment also includes geometry checking prior to the bending process: If bending begins in the wrong position, the machine does not grant release, thus ruling out operating errors. Optional additional features provide more convenience and increase throughput as well as the system’s efficiency. Data exchange from the optional TBS-3D tube calculation software (PC version) is possible via USB stick or FTP access from the computer to the machine controller. USB and LAN (RJ45) connections are included as standard. Existing tube geometries can be easily and quickly converted, e.g., via the STEP format. Standard equipment: → Electromechanical drive for bending axis, 4 kW → Rotational speed 2.9 rpm (=17°/sec.) → Bending direction: left → Bending angle resolution: 0.1° → Max. bending radius: 200 mm → Bending shaft diameter: 50 mm → Electronic length measurement ±0.1 mm → Electronic rotation angle measurement ±0.1° → Manual stop system (longitudinal stops) → Manual indexing system (15° in rotation) → Three-jaw chuck for securing tube in the carriage → External control panel PLC control: → 10.1" touchscreen Pgodpfx Aettah Rjgxok → ETH 10/100, X2X Link, USB → Foot switch operation → Data transmission via network (W)LAN or USB → Material database Unique graphic programming: simple geometries can be calculated directly on the machine. After entering length and angles, the control computes the feed and bending angles directly. Hydraulics: → Hydraulic power 3 kW → Hydraulic tube clamping with adjustable clamping pressure → Programmable pre-emptive mandrel retraction Options (available as additional equipment): → Variable bending speed via frequency inverter or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + rotation) → Mobile version (on rollers) → Radius extension Images show new machine

Stanje: rabljeno, Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Plazmový řezací systém pro trubky a profily Stroje pro plazmové řezání trubek a profilů. Řezací kontura je definována a vytvořena pomocí CAM softwaru. Vytvořený CNC kód je následně přenesen do stroje přes USB nebo síť. Program lze jednoduše zvolit přes 12" dotykový displej. Po ručním vložení obrobku se spustí automatický řezací proces. - Délka trubky: max. 6000 mm - Pro kruhové trubky do max. vnějšího průměru 150 mm - Pro čtyřhranné trubky do max. 101,6 x 101,6 mm (4"x4") - Maximální hmotnost trubky 150 kg - Čtyřčelisťové sklíčidlo - Možnost bočního nakládání, zajištěno světelnou závorou - Plně automatický řezací proces - Průmyslové PC řízení s 12" dotykovým displejem - Import dat přes USB a LAN - Připojení: 400V 3fázově, 2 kW - Rozměry: 690x100x180 cm - Hmotnost: cca 800 kg Podpfsx Ebzqjx Agxjgk Vyrobeno v Německu Obrázky ukazují obdobný stroj.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 11 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 181070, Scope of Supply for the Overhead Rail Shot Blasting Machine Pgodpfxsy Avh Ns Agxok Blast Cabinet: 100% manganese steel Y-Rail Transport System: included Abrasive Recovery Hopper: included Automatic Abrasive Cleaning: included Automatic Abrasive Flow Control: included HMI: Siemens TP7 Remote Access (via VPN): included Characteristics of the Installed Turbines Number: 2 units Drive Power per Turbine: 11.0 kW Speed Control: included Characteristics of the Blasting Machine Blasting Applications: Surface finishing with cleaning, roughening, strengthening, derusting, descaling Workpiece Description: Various steel parts Coverage (%): Component-dependent Capacity (parts/hour): Individual Abrasive (Material and Size): Aluminium and Alu-Zinc abrasives or steel shot in various sizes possible Abrasive Quantity (Initial Fill): Approx. 1000 kg Workpiece Material: Steel Hook Load: Max. 450 kg Workpiece Temperature: Max. 80° C Workpiece Height: 1300 mm Part Diameter (min/max): 1100 mm Sound Pressure Level without Acoustic Enclosure: Approx. 85 - 90 dB(A) Optional: Dry Filter incl. Secondary Filter €18,880.00 Piping 5m €1,980.00 Technical Data for the Filter System: Type: Dry Filter Airflow: 2,600 m³/h Filter Area: 36 m² Residual Dust Content: ≤ 2.0 mg/Nm³ Residual Dust Content with Secondary Filter: ≤ 1.0 mg/Nm³ Supervised Installation from €3,500.00 The system is delivered CE-compliant. Excluded are interlinked systems or systems where essential components are added or modified by the customer. In those cases, AGTOS will issue an installation declaration. We are happy to provide you with a layout drawing upon request.

Leto izdelave: 2015, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: ODW 2687/20, THROUGHFEED PRESS FOR SANDWICH ELEMENTS The system is part of a larger production line; please refer to our other listings for more information. The plant is fully enclosed and equipped with a walk-on maintenance platform above the press. WORKPIECE DIMENSIONS (from previous production): Length: 2000mm - 8500mm Width: 1500mm - 2500mm Thickness: 12mm - 60mm Maximum batch weight: 60kg (can be increased upon consultation with the manufacturer, without modifications) TECHNICAL DATA: Total pressing force: 4,250kN Specific pressure: 10 - 20 N/cm² Number of hydraulic cylinders: 16 Hydraulic cylinder diameter: 110mm Individual cylinder control: yes Hydraulic operating pressure: 20 - 280bar Platen opening: 150mm Maximum operating temperature: 80°C Approximate press weight: 57,000kg Required air pressure: 6 - 10bar Required extraction volume at air speed v = 30m/s: 3,400m³/h Thermal output: 2x 110,000 kcal/h Heating medium: hot water Customer inlet temperature: 85 - 95°C Separate heating of upper and lower heating plate Cooling system for temperature reduction of heating plates during product changeover INSTALLATION DIMENSIONS: Width: 5,066mm Pgodpfjyt Rhkex Agxok Length: 9,604mm Height approx.: 5,013mm

Leto izdelave: 2015, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: A-150016, AUTOMATED ADHESIVE APPLICATION MACHINE, SURFACE GANTRIES AND AUTOMATED INSERTING UNIT FOR METAL SHEET INLAYS This system is part of a larger production line; please also refer to our other listings for more information. The offered system includes 3 provisioning stations for cover layers, an automated adhesive application machine for sandwich bonding, a lay-up conveyor for the manual assembly of the inlay/ribbing, surface gantries for the handling of cover layers, and an automated inserting unit for metal sheet inlays/reinforcement points. COMPONENT DIMENSIONS (from previous production): L/W min: 2000mm x 1500mm Pgjdpfx Agsyt Nm Sexsk L/W max: 8000mm x 2500mm H min: 12mm H max: 60mm MATERIALS (from previous production): GRP, sheet metal, plywood, wood/PU strips, PVC, Styrofoam GLUING PORTAL FOR CONTOUR & SURFACE APPLICATION (of cover layers & inlays): Number of needle valves for surfaces: 104 Number of needle valves for contour: 1 Adhesive system: 1C-PUR Number of nozzles for water spray unit: 8 ANCILLARY UNITS: Climatic chamber (storage for 1C-PUR adhesive) Vacuum pump for surface gantries Punching unit

Stanje: novo, Leto izdelave: 2025, Priprava abraziva 1x pometna jama 1x vedričasti transporter 1x zračni separator 1x električno vibracijsko sito 1x bunker za abraziv 1x tlačna peskalna naprava 200 l 1x peskalna cev, peskalna šoba, varnostno stikalo, krmilni kabel 1x krmilna omarica Opcijska oprema: - Prečna polžna transportna naprava čez celotno širino peskalne hale (tudi kot dodatni zalogovnik za večurno peskanje) Pgjdsw Ivvcopfx Agxjk - Razširitev na 2 abraziva: feritno in mineralno - Bubenski magnetni separator - Končna stopnja demagnetizacije - Magnetni predal

Stanje: novo, Leto izdelave: 2025, Blast Container High Cube Basic with Sweep Floor Shovel Hopper for approx. 4 pressure vessel fillings + blast vessel filling for extended blasting operation without refilling. Type SC.20FHC.5800 Basic Standard equipment, ready for operation: (Fill blasting media and connect power and compressed air) - 1x Control cabinet with emergency stop, Siemens Logo - 1x Pressure blast vessel - 1x Pressure regulator and water separator - 1x Blast hose DN 25 with 8mm nozzle - 1x Remote control with dead man's switch - 1x Media loading box/bunker - 1x Blast media sieve + coarse particle collection bin - 1x Vertical separator with blast dust extraction (dust reduction during blasting) - 1x Filter unit with pre-chamber separator - 1x Extraction wall as louvre/baffle separator - 1x Rubber wall cladding, 4mm with fabric reinforcement - 1x Tread plate floor 3/5 - 1x LED lighting - 1x Emergency lighting, door end switch, emergency stop - 1x Breathing air filter - 1x Blasting helmet - 1x Blasting gloves - 1x Suit Psdpfx Agjw Ivk Tsxogk Options: - Side Door Open, container can be fully opened on the side for easy forklift loading - Container widening - Container extension - Crane roof hatch - Crane rail 500 kg - C-profile rail for powder coating equipment - Blast trolley - Filter with Big Bag - HEPA after-filter for contaminated dusts, e.g., when blasting stainless steel - Stainless steel tread plate floor for stainless steel blasting - Aluminum tread plate floor - And much more on request!

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, pritisk: 6 letvica, trajanje garancije: 60 meseci, notranja širina: 5.000 mm, notranja dolžina: 15.000 mm, notranja višina: 5.000 mm, filtrirna površina: 352 m², volumenski pretok: 22 m³/h, Oprema: dokumentacija / priročnik, osvetlitev, Blast house *up to 5 years warranty* for all blasting media, constructed from a steel frame/insulated panels, with filtration system, recirculating air system, abrasive recycling, 200l pressure blasting pot with automatic refilling, blast hose with dead-man control, breathing air system, LED lighting, wall cladding with 70 shore 4mm fabric-reinforced rubber, sweeping pit with bucket elevator. Abrasive return via sweeping pit with bucket elevator, optionally upgradable to cross screw conveyor with metering hood spanning the full width as a sweeping pit or as a complete flat conveyor floor. Workpiece transport upgradeable: blast trolley with rail track, crane system, roof crane opening, etc. Pgodsu Hy Tpopfx Agxek For glass bead blasting of stainless steel, upgradeable with appropriate magnetic drawer or electrically driven magnetic drum separator. For blasting with two different blasting media (ferrous and mineral), upgradeable with magnetic drum separator, final demagnetization stage, and second air sifter for media separation and cleaning. Safety features: emergency lighting with battery backup, emergency stop switches inside the cabin and outside, inspection window to blast chamber, gate/door end switches, dead-man control, pressure vessel quick venting. Warranty up to 5 years on selected components. 50 years of experience and more than 3,000 systems built in blast room engineering.

Stanje: rabljeno, Quantity-dependent dual system Machine (additional): Separator, condenser, and control cabinet from 2010 Equipment: 1 NH3 separator, 2 refrigeration compressors, 1 evaporative condenser, 1 control cabinet Podpfx Aovcqzrsgxjgk

Leto izdelave: 1982, stanje: rabljeno, Cylindroconical 580 hl fermentation and storage tank – glycol-cooled, 1 x cone cooling, 3 x shell cooling. – Swivelling cone – stainless steel – insulated – short standing support ring Machine (additional info): Outdoor tanks Pjdpfx Asvcq A Asgxjgk Capacity: 580 hl Operating pressure: 2 bar Operating temperature: 20 °C Cooling surface: 29 m² (1 x cone cooling; 3 x shell cooling) Material: stainless steel Orientation/installation: upright Base design: short support ring Features: tank cooling; swivelling cone; insulation; support frame; outlet DN100; CIP connection; 2 x temperature probes; sample valve

Leto izdelave: 2003, stanje: rabljeno, Machine (additional): Stainless steel brewing vat Total capacity up to top edge of shell: 26,000 liters Diameter approx.: 3 m Shell height approx.: 2 m Podpfxjvcqz Eo Agxsgk Material thickness: 3 mm unheated shell Width: 3.4 m Material: Stainless steel 1.4301 Base construction: on stainless steel tube supports, anchored to floor Features: External boiler, conical vapor hood (stainless steel, D = 3,200 mm), conical insulation hood (stainless steel outer diameter = 3,400 mm), 2 outlets DN200 and DN100, manhole DN600, vapor pipe (12,000 mm), internal lighting

Leto izdelave: 1991, stanje: rabljeno, 6 upright stainless steel tanks with dished ends, cooling jacket, manway, sampling valve, insulation, and central outlet. Purchase of individual units or subsets is possible. Machine (additional info): stainless steel tanks with temperature control Pedpfx Ajvcqulogxogk Total volume: 2,429 hl Max. pressure for 4 tanks: 0 bar (non-pressurized) Max. pressure for 2 tanks: 5 bar Material: stainless steel Configuration/position: upright tanks Base construction: cylindrical with dished ends, supported on 4 square-section legs Equipment: 4 storage tanks (approx. 445 hl each), 2 pressure tanks (320 hl each), manway in the shell, 1 shell cooling zone, insulation with sheet metal cladding Peripheral equipment: integrated temperature control system

Leto izdelave: 1983, stanje: rabljeno, Yeast propagation system featuring a steamable wort sterilisation tank rated for 2 bar operating pressure with a capacity of 2.47 hl, a second heatable and coolable wort sterilisation tank rated for 2 bar operating pressure with a 12.7 hl capacity, as well as a yeast propagation tank with a capacity of 55 hl, permissible operating pressure of 2 bar, and jacket cooling in the lower third (without cone). All tanks are equipped with agitators. The package also includes a CIP tank. The system is controlled via a Steinecker control cabinet (time-controlled). Tanks are also available individually. Additional machine details: with control cabinet and CIP tank Equipment: 2 wort sterilisation tanks each with agitator (approx. 2.4 hl and approx. 12.7 hl), control cabinet, CIP system, conical pressure tank with agitator. Pgsdpevcqt Usfx Agxsk

Stanje: rabljeno, Machine (additional information): Year of manufacture mostly 2003 Wort extraction: 150 hl Grain bill: 2500 kg Power: Three-phase current Voltage: 400 V Frequency: 50 Hz Pgjdpfxsvcqrwe Agxok Equipment: Lauter tun, NDK whirlpool wort kettle system with external boiler, additional whirlpool, trub collection system, hop dosing system Peripherals: Lauter wort heater, kettle vapor condenser

Leto izdelave: 1988, stanje: rabljeno, Machine (Additional Information): Stainless steel tanks with temperature control Total capacity (gross): 904 hl Pgjdpfx Ajvcqg Iogxsk Material: Stainless steel Equipment: 3 fermentation tanks (1 x 554 hl, 2 x 175 hl), 1 yeast tank (37 hl), integrated temperature control system (Nerb)

Leto izdelave: 1995, stanje: rabljeno, Flotation tank – Ammonia-cooled, 1 x jacket cooling. – Stainless steel – Insulated and cladded – Short standing base collar – Cleaning air fitting with safety valve Machine (additional information): Outdoor tank for liquid storage Pedpfx Agsvcqdyoxjgk Capacity: 74,400 liters Operating pressure: 0.9 bar Width: 3.27 m Height: 12.55 m Material: Stainless steel Orientation/position: vertical Base construction: short standing base collar Features: Cooling: 1 x jacket cooling; insulation; cleaning air fitting with safety valve; temperature measurement

Leto izdelave: 1985, stanje: rabljeno, Pressure Tank Cellar with 4 upright 32,400 L stainless steel pressure tanks and double-seat valve solution at the operating level. The tanks are cooled with ice water. Machine (Additional): 4 pressure tanks Diameter per tank: 2,550 mm Total height per tank: 7,360 mm Cooling surface per tank: 25 m² Permitted operating overpressure: 3 bar Tank volume: 32,400 L Length: 12 m Width: 4 m Height: 7.5 m Material: Stainless steel 1.4301 Equipment: Tank cleaning device with spray head, safety valve, pressure gauge, cleaning air valve combination; sampler, level indicator with flaps, outlet flap, pressure tank documentation and drawings available Periphery: Inlet and outlet piping via double-seat valves Pgedpfx Agovcqynexok Weight: 2,585 kg

Leto izdelave: 1979, stanje: rabljeno, Machine (additional): Wort cooler Capacity: 150 hl/h Pressure: 6 bar Max. temperature: 100 °C Length: 2550 mm Width: 900 mm Height: 2000 mm Pgodpsvcqtzjfx Agxok Material: Stainless steel Base design: Mounted on frame Features: 2-stage, connection sizes: DN65 (wort, water) and DN80 (ice water) Periphery: Wort aeration, mixing pump, booster pump (water) Weight: 1080 kg