Vzdolžno Krožne Žage nakup rabljenega (4.409)

Stanje: novo, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangle 350 x 200 mm Saw blade length: 3375 x 27 x 0.9 mm Blade speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.5/1.8 kW Machine weight approx. 0.65 t Space requirement approx. 1.5 x 1.75 x 1.9 m SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy Gsdpfsd Iipxox Af Sjir - Miter cuts up to 60° left and 45° right - Material height sensor - Ball-bearing rotary table - Hydraulically operated, laterally adjustable vice - Heavy-duty, large material support - Automatic coolant system

Stanje: novo, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangle 350 x 200 mm Saw band length 3375 x 27 x 0.9 mm Band speed 18 – 100 m/min Table height 940 mm Total connected load 1.5 kW Machine weight approx. 0.65 t Space requirement approx. 1.5 x 1.75 x 1.9 m SPECIAL OFFER PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height sensor Gjdpfjfgyiajx Af Sjir - Ball-bearing turntable - Hydraulic vice, laterally adjustable - Heavy-duty, large material support - Automatic coolant system

Stanje: novo, Cutting capacity at 90° (round): 250 mm Cutting capacity at 90° (square): 210 mm Cutting capacity at 90° (rectangular): 290 x 210 mm Saw blade length: 2,965 x 27 x 0.9 mm Table height: 940 mm Blade speed: 25 – 90 m/min Total power requirement: 1.1 / 1.3 kW Machine weight: approx. 0.35 t Required space: approx. 1.3 x 0.8 x 1.5 m SPECIAL PROMOTIONAL PRICE!!! (20347) Double miter metal band saw featuring: - Blade speed: 25 – 90 m/min - Miter cuts up to 60° left and 45° right - Ball-bearing turntable for quick miter adjustment - Sliding quick-release vise Giodpfx Afefgyh Re Sjr - Quick-clamping lever - Automatic coolant system

Stanje: novo, Cutting range at 90 degrees: round 250 mm Gedpfx Afjd Iip No Ssir Cutting range at 90 degrees: square 210 mm Cutting range at 90 degrees: rectangle 290 x 210 mm Saw band length: 2,965 x 27 x 0.9 mm Table height: 940 mm Band speed: 35 + 70 m/min Total power requirement: 1.1 / 1.3 kW Machine weight approx. 0.35 t Space requirement approx. 1.3 x 0.8 x 1.5 m SPECIAL PROMOTIONAL PRICE!!! Double mitre metal bandsaw featuring: - Band speed 35 + 70 m/min - Mitre cuts up to 60° left and 45° right - Ball-bearing turntable for rapid mitre adjustment - Movable quick-action vice - Quick-release lever - Automatic coolant system

Stanje: novo, Cutting capacity at 90° (round): 250 mm Cutting capacity at 90° (square): 210 mm Cutting capacity at 90° (rectangular): 290 x 210 mm Godpfsfgyh Sjx Af Ssir Saw blade length: 2,965 x 27 x 0.9 mm Table height: 940 mm Blade speed: 25 - 90 m/min Total power requirement: 1.1/1.3 kW Machine weight: approx. 0.35 t Space requirement: approx. 1.3 x 0.8 x 1.5 m SPECIAL PRICE!!! Double miter metal band saw Hydraulic semi-automatic with: - Hydraulic vice - Material height sensor - Cut monitoring via ammeter - Cutting pressure and feed rate regulator - Blade speed 25 - 90 m/min - Miter cuts up to 60° left and 45° right - Patented, ball-bearing rotary table for easy miter adjustment - Movable quick-release vice - Quick-release lever - Automatic cooling system

Stanje: novo, Cutting capacity at 90° (round): 350 mm Cutting capacity at 90° (square): 330 mm Cutting capacity at 90° (rectangle): 450 x 320 mm Saw band length: 4250 x 34 x 1.1 mm Band speed: 40 + 80 m/min Table height: 845 mm Saw blade width: 34 mm Total power requirement: 2.2 kW Machine weight: approx. 0.985 t Space requirements: approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I • Mitre cuts left & right up to 60° without machine conversion Godpfefgyicjx Af Ssir • 34 mm saw blade width • Large, ball-bearing supported, rotary worktable • Saw blade guides adjustable over extra-wide linear rails • Heavy-duty, robust gearbox • Large-area clamping plates • Infeed and outfeed roller • Removable chip tray (for cleaning) • Free-standing, safe, ergonomic control panel • Storage space for blades and consumables • Cutting pressure control and feed rate regulator • Fully hydraulic vice • Quick clamping (front loading) • Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid descent to start of material or direct cutting for series cuts 4. Switch off saw band 5. Raise frame just above the material 6. Open vice Optimal, material-independent cutting results through fine adjustment of the saw frame via: * Pressure control valve (cutting force) * Feed rate control valve (cutting speed) * Clearly arranged selector switch with pictograms for intuitive operation

Stanje: novo, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangle 500 x 310 mm Blade speed: 15–100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight approx. 1.2 t Space required approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth operation thanks to miter cut, feed regulator, and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for cleaning/disinfection) • Energy-saving and low-vibration due to miter cutting • Ergonomic, safe, free-standing control panel • Frequency-controlled saw drive 15–100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vise • LEDs to monitor all safety functions • Large-diameter wheels (520 mm) • Clear miter adjustment up to 60° Semi-automatic operation: 1. Clamp material Gedpfofg E Hlox Af Soir 2. Start saw 3. Rapid downfeed to the material or, for series cuts, cut immediately 4. Saw blade off 5. Raise frame to just above the material 6. Open vise

Stanje: novo, Cutting capacity at 90 degrees: round 305 mm Cutting capacity at 90 degrees: square 260 mm Cutting capacity at 90 degrees: rectangle 350 x 200 mm Saw blade length: 3375 x 27 x 0.9 mm Blade speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.61 t Required space: approx. 1.5 x 1.75 x 1.9 m Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball-bearing rotary table - Vise laterally adjustable - Solid, large material support - Automatic cooling Gsdsfd Abaopfx Af Ssir Illustration shows semi-automatic version.

Stanje: novo, Cutting diameter: 255 mm Saw band length: 2765 x 0.9 x 27 mm Cutting width: 300 x 180 mm Blade speed: 35 + 70 rpm Total power requirement: 1.8 kW Machine weight approx.: 450 kg Space requirement approx.: 1.7 x 1.23 x 1.75 m SPECIAL OFFER PRICE!!! Double miter metal band saw, frequency inverter hydraulics, semi-automatic GBS 250 Super HA-I Easy • Miter cutting left 60° / right 45° • Material height sensor (automatic cut start detection) • Frame and gearbox cast in one piece – very quiet and low vibration operation • Hydraulic vise, laterally adjustable Gsdpfx Afefn Ando Seir • Precision industrial-grade bearings • Heavy-duty vise and cast frame • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter • Feed pressure regulator • Support roller (infeed side) • Ball-bearing mounted turntable Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid downfeed to material start, or proceed directly with cutting for serial cuts 4. Stop saw blade 5. Raise frame just above the material 6. Open vise

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900 x 900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions L x W x H: 4,485 x 1.68 x 3.15 m Gedpefg E Hpjfx Af Sjir The semi-automatic, hydraulic saws of the X-tech line offer top-level sawing technology and optimal performance for cutting special steels. • The electro-welded machine frame and steel saw frame fulfill all cutting requirements and eliminate vibrations and noise. • The chip conveyor is hydraulically driven and speed adjustable. • All machine movements (saw frame, vice, feed, saw band guides) operate using modern linear guides with high static and dynamic load capacity, ensuring extremely low sliding friction. • Another key feature is the material positioning rollers, driven by a hydraulic motor. They move at a right angle to the material, allowing optimal material clamping. • Thanks to the height control of the saw band position, the operator can place the band close to the top of the material. After the cut, the band automatically returns to its previous position. Remaining in the lower position can also be selected as an alternative. During the cutting cycle, the software compares cutting load with preset parameters, allowing the sawing system to stop if irregularities are detected. • The saw band is cleaned by two adjustable steel brushes, driven hydraulically. • The hydraulic unit, including filter and pressure gauge, ensures exceptionally smooth operation at constant pressure. • Finely ground carbide inserts that clamp the saw band, complete with side-hardened and adjustable guide rollers. The adjustable band guide moves automatically as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder controlled by the machine software. Tension is automatically relieved after a set period if the machine is in standby mode or after a cycle has finished. • Automatic CNC-controlled versions are available in the X-TECH 900 / 1200 models, with a feed length of 500 mm for the high-production series. • The material is supported by a table with seven rollers, driven by a hydraulic orbital motor, to ensure precise positioning even under maximum load. • All guided movements are operated by four recirculating ball guides with a high capacity for static and dynamic loads, significantly reducing feed friction. Hardened and ground prismatic guides. Price on request.

Stanje: novo, Cutting capacity at 90°: round 310 mm Godpfxed Iiptj Af Ssir Cutting capacity at 90°: square 280 mm Cutting capacity at 90°: rectangular 400x250 mm Saw blade length 4020x34x1.1 mm Blade speed 37 + 74 m/min Table height 940 mm Total power requirement 1.8/2.2 kW Machine weight approx. 0.68 t Space requirement approx. 1.5 x 1.78 x 1.3 m SPECIAL PRICE!!! Double miter bandsaw, hydraulic semi-automatic, GBS 310/400 HA-I Easy • Mitre left 60° + right 45° • Industrial hydraulics, powerful 18 bar • Optimum access to material • Ammeter for monitoring: - Cutting force optimization - Blade service life - Cutting performance • Vice opens/closes hydraulically • Chip removal brush • Material rotary table with ball bearings • Quick-release vice, adjustable • Material height sensor (automatic detection of cutting start) Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid descent to material start, or direct cutting in serial operation 4. Switch off saw blade 5. Raise frame just above material 6. Open vice

Stanje: novo, Cutting capacity at 90°: round 250 mm Cutting capacity at 90°: square 210 mm Cutting capacity at 90°: rectangular 290 x 210 mm Saw band length: 2,965 x 27 x 0.9 mm Table height: 940 mm Band speed: 35 / 70 m/min Total power requirement: 1.1/1.3 kW Machine weight approx. 0.35 t Required space approx. 1.3 x 0.8 x 1.5 m SPECIAL OFFER PRICE!!! Double mitre metal bandsaw, hydraulic semi-automatic, equipped with: - Hydraulic vice - Material height sensor - Cut monitoring via ammeter - Adjustable cutting pressure feed regulator - Band speed 34 / 74 m/min - Mitre cuts up to 60° left and 45° right - Patented ball-bearing turntable for easy mitre adjustment Godpfx Afsd Iip Rs Soir - Rapid-action vice, movable - Quick-release lever - Automatic coolant system Shipping cost share: 120 EUR

Stanje: novo, Stanje: novo Dobavni rok: približno 12 - 14 tednov po naročilu Država izvora: Turčija Cena: 12.800 € Leasing obrok: 245,76 €/mesec Gisdpfx Ajyq Sn Hsf Sjr Maks. debelina pločevine (konstrukcijsko jeklo): 3,5 mm Izsek: 750 mm Motor: 2,2 kW Hitrost: 6,1 m/min Dolžina: 2000 mm Širina: 600 mm Višina: 1400 mm Teža: 750 kg Minimalni/maksimalni premer kroga: 200/1200 mm Okvir iz varjene jeklene konstrukcije Rezila iz specialnega jekla Dolga življenjska doba rezil zaradi stožčasto ležajnih gredi Pogon z motornim menjalnikom in zavoro Sistem za nastavitev premera reza z motoriziranim pogonom Mobilna upravljalna plošča Sistem za notranji rezni premer Oprema v skladu s CE predpisi

Stanje: novo, Stanje: novo Dostavni rok: cca 12 tednov od naročila Država izvora: Turčija Cena: 6.900 € Leasing rata: 133,17 € Maks. debelina pločevine - konstrukcijsko jeklo: 2 mm Izvit: 700 mm Motor: 1,1 kW Hitrost: 7,5 m/min Dolžina: 1.400 mm Širina: 400 mm Višina: 1.150 mm Teža: 360 kg Min/max premer kroga: 120 / 1.000 mm Izvit na strani noža: 280 mm Reduktor motor z zavoro Gisdpfx Afjyq Snts Ser Nožno stikalo Centralno mazanje OPCIJA: Pnevmatska nastavitev zgornjih valjev

Stanje: rabljeno, Dobavni rok cca 12 - 14 tednov od naročila Država izvora: Turčija Cena: 20.000 € Maks. debelina pločevine - konstrukcijsko jeklo: 5 mm Iztek: 1200 mm Hitrost: 4,1 m/min Dolžina: 3000 mm Širina: 750 mm Gedpfx Afoyq Smvo Ssir Višina: 1400 mm Teža: 1350 kg Min./maks. premer ronda: 250 / 2000 mm Iztek na strani noža: 300 mm Mobilna upravljalna plošča Hidravlično vpenjanje pločevine Reduktorski motor z zavoro Motoriziran sistem pozicioniranja pločevine Možni tudi notranji rezi Oprema v skladu s CE direktivami Možnosti: 1 par rezervnih nožev 1.200,00 € Robilna naprava z 1 parom valjev 2.000,00 €

Stanje: zelo dobro (rabljeno), Kataloška številka 7833 TEHNIČNI PODATKI - maks. premer žaginega lista: 400 mm - premer luknje žage: 30 mm - maks. višina reza: 110 mm - glavni žagin list je nastavljiv gor/dol in pod kotom - zaščita za žagin list - z bočnim vozičkom - kotnik - dolžina reza na vozičku: 870 mm - širina reza na vodilu: 600 mm - glavni motor približno 4 kW - mere mize: 900x1020 mm - premer odsesovalnega priključka: 110 mm - mere d/š/v: 2500x1400x1000 mm - teža: 530 kg PREDNOSTI – izdelano na Poljskem – z bočnim vozičkom – tehnična dokumentacija DTR Gijdpjyz Nycsfx Af Sor – rabljena žaga, v zelo dobrem stanju Cena brez DDV: 7.500 PLN Cena brez DDV: 1.790 EUR (odvisno od tečaja 4,2 EUR) (Cene se lahko spremenijo ob večjih nihanjih tečaja)

Stanje: rabljeno, Leto izdelave: 2000, Najv. debelina pločevine: 2 mm jeklo Najv. premer kroga: 1000 mm Motorski pogon prek nožnega stikala Gsdpfxjwb Efzj Af Sjir V dobrem stanju

Stanje: rabljeno, Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, Manufacturer and Model: iDEAL BAS 340 Bandsaw Blade Welding Machine Year of manufacture: 2014 Wood saw bands: From 25 × 0.6 mm to 120 × 1.2 mm Bimetal/carbide saw bands: From 25 × 0.6 mm to 105 × 1.65 mm Stainless steel saw bands: From 25 × 0.5 mm to 50 × 0.8 mm Band knives: From 30 × 0.4 mm to 120 × 1.1 mm Construction steel band: Up to 250 mm² Stainless steel band: Up to 150 mm² Clamping system: hydraulic Rated power: 45.0 kVA (50% duty cycle) Gsdpeyr Idasfx Af Seir Dimensions (L × W × H): 1214 × 957 × 1982 mm Weight: 800 kg Control system: central parameter control, 99 program memory slots Servo-controlled jaw positioning 7-inch color touchscreen, USB interface with password protection Adjustable welding voltage Electronic piece counter Parameter deviation monitoring with automatic shutdown Automatic hydraulic deburring after welding Graphic display of the annealing process Infrared pyrometer with LED lighting and safety circuit

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1976, vrsta upravljanja: ročni, stopnja avtomatizacije: ročni, vrsta aktuacije: električni, delovna širina: 600 mm, najv. debelina pločevine: 3 mm, maks. debelina aluminijaste pločevine: 3 mm, najv. debelina bakrene pločevine: 3 mm, najv. debelina jeklene pločevine: 3 mm, maks. debelina pločevine iz nerjavečega jekla: 3 mm, moč: 22 kW (29,91 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, obratovalni tlak: 5 letvica, tlak (min.): 4 letvica, tlak (maks.): 5,5 letvica, skupna masa: 4.500 kg, skupna dolžina: 3.000 mm, skupna širina: 2.200 mm, skupna višina: 1.800 mm, Oprema: centralizirani mazalni sistem, MINO GIOVANI BATTISTA Slitting Line for Steel Sheets 600 mm x 3 mm – Used Coil Slitting Line – MINO GIOVANI BATTISTA + Strip Leveler MINO GIOVANI BATTISTA Max. sheet thickness: 3 mm Max. slitting width: 600 mm Knife sets (more than 50 pcs) Coil inner diameter: 400–550 mm Outer diameter: up to 1500 mm Max. coil weight: up to 5 tons Uncoiler and recoiler with spacers Technical specifications Drive type: electric Working width: 600 mm Max. sheet thickness: 3 mm Max. steel thickness: 3 mm Power: 22 kW (29.91 HP) Voltage: 380 V Frequency: 50 Hz Total weight: 4,500 kg Total length: 3,000 mm Total width: 2,000 mm Gjdpeyn Shzofx Af Ssir Total height: 1,800 mm Equipment • Centralized lubrication system • Pneumatic coil removal from uncoiler • Machine is under power and currently installed in production Included free of charge in the delivery Free of charge with the slitting line we deliver a sheet cold rolling machine for achieving tight thickness tolerances. MINO GIOVANI BATTISTA – Rolling Machine Model: LAS Power: 6 kW Weight: 4,500 kg Cold rolling machine (for narrow thickness tolerances) Max. material width: 130 mm Max. material thickness: 3 mm Uncoiler, power transmission via belt drive Prices Slitting line: €11,000 Rolling machine: €3,500 The rolling machine is included in the package at no extra cost, as it was used together with the line. Disassembly and loading costs: €1,800 Delivery terms Parity: EXW 10290 Zaprešić – Croatia Loading space length: 6 m Width: 2.2 m Total approximate weight: 9 tons Prices are excluding VAT – reverse charge applies Delivery time Machine available 10–15 days after payment. Fixed loading date must be announced at least 7 days in advance to organize forklift and crane.

Stanje: zelo dobro (rabljeno), Fezer kapna in kotna žaga Zmogljiva za delavnico in gradbišče za rezanje lesa, aluminija in plastike Tip: KG 25 Motor na izmenični tok 220 V, 0,85 kW 2800 vrt/min Postaja za kotne reze Vsak vmesni položaj je mogoče blokirati z vpenjalnim vijakom. Za žagin list 250 mm Teža: pribl. 24 kg Gedpfoyxx Evex Af Soir Območje reza pri 90 stopinjah: V = 50 mm, Š = 120 mm Lokacija: na zalogi, 54634 Bitburg - takoj na voljo -

Leto izdelave: 1990, stanje: rabljeno, številka stroja/vozila: 102-014-3150, Saw blade diameter: 400 mm Cutting range at 90° round: 130 mm Cutting range at 90° rectangular: 210 x 80 mm Giedodbp Eqjpfx Af Sjr Mitre cutting range at 45° round: 130 mm Mitre cutting range at 45° rectangular: 160 x 80 mm Cutting speed: 11/22 m/min Space requirement: 2650 x 1450 x 1980 mm Weight: approx. 1100 kg

Leto izdelave: 1986, stanje: dober (rabljeno), številka stroja/vozila: 120 603, Cutting capacity round: 250 mm Cutting capacity rectangular: 250 mm Giedsf S Ilyepfx Af Sjr Saw blade dimensions: 3660 x 25 x 0.9 mm Blade speed: 20 - 70 m/min Saw drive: 1 kW Space requirement: 1900 x 1450 x 1250 mm Weight: approx. 850 kg

Leto izdelave: 2000, stanje: rabljeno, številka stroja/vozila: 97464,

Leto izdelave: 1986, stanje: rabljeno, številka stroja/vozila: 1358, Cutting capacity round: 400 mm Cutting capacity rectangular: 400 mm Gisdebgnfyspfx Af Sor Single feed length: 600 mm Saw blade dimensions: 6200 x 38 x 1.3 mm Blade speed: 12 - 100 m/min Saw drive: 380 V, 7.5 kW Required space: 2850 x 2100 x 1900 mm Weight: approx. 3000 kg

Leto izdelave: 1992, stanje: rabljeno, številka stroja/vozila: 7375, Cutting length: 5000 mm Saw blade diameter: depending on requirements, 420 - 500 mm Space requirement: 6400 x 1400 x 1700 mm Gsdpjz E Snofx Af Seir Weight: approx. 1600 kg