Vode nakup rabljenega (752)

Stanje: rabljeno, Leto izdelave: 1993, številka stroja/vozila: 5/4573, skupna širina: 7.500 mm, skupna višina: 11.400 mm, skupna masa: 45 kg, The cost-effective drainage of condensate for your compressor. Oil is separated from the water using a filter set (PLEASE NOTE: The filter set is not included in the scope of delivery). Nkodpfeqmmaljx Abbet The purified water (only when used with the filter set) complies with the regulations for discharge into the sewage system. Warranty and liability are excluded for this listing. Price on request.

Leto izdelave: 2011, Stanje: pripravljen za uporabo (rabljen), Cooling capacity: 36.2 kW, operating temperature: 50°C, weight: 1.57 t, on-site inspection possible. Nkedpfsrick Eex Abbot

Leto izdelave: 2007, Stanje: dober (rabljeno), Filtracijska enota je sestavljena iz: rezervoarja za vodo, peskanega filtra, tlačne črpalke, filtra z aktivnim ogljem. Naprava za proizvodno linijo izolacijskega stekla. Širina: 2000 mm / Rezervoar za vodo 2100 mm Višina: 2200 mm / Rezervoar za vodo 1700 mm Globina: 600 mm / Rezervoar za vodo 750 mm Teža: ca. 250 kg / Rezervoar za vodo: ca. 100 kg Nedpfx Ajw I Hgrsbbskt

Stanje: rabljeno, Leto izdelave: 2007, z vozičkom za prevoz odpadkov Nksdpfx Abow Ivk Hebet Širina: 1000 mm Višina: 2550 mm Globina: 1500 mm Stanje: rabljeno

Stanje: rabljeno, Length: approx. 400 mm, Nedoh D E Uwjpfx Abbskt Width: approx. 400 mm, Height: approx. 750 mm, Weight: 15 kg, Application: For use in compressed air systems

Stanje: rabljeno, Length: approx. 400 mm, Width: approx. 400 mm, Height: approx. 750 mm, Nkodpsh D E T Defx Abbet Weight: 15 kg, Used in compressed air systems

Stanje: skoraj kot novo (rabljeno), Baktec water doseermachine en koelunit in goede werkende staat. Voor meer informatie graag een aanvraag sturen. Nkjdoump Axjpfx Abbot

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Continuous-Flow Water Chiller LANGHEINZ WKG 90 Cooling Capacity: Nodpfxjghrmzj Abbekt With an inlet temperature of approx. 17.5°C and a flow rate of 7.5 liters per minute, the dispensed chilled water has the following temperatures: 10 liters: +1.9°C 20 liters: +2.7°C 30 liters: +3.2°C Peak cooling capacity: 180 liters per hour Continuous cooling capacity: 90 liters per hour Batch size: up to 50 liters with approx. 20 kg ice storage Electrical connection: 230V/50Hz Water connection: 1/2" Dimensions (W x H x D): 950 x 560 x 530 mm Water Chiller

Stanje: rabljeno, Leto izdelave: 2003, Proizvajalec: Falch Hochdruck-Strahlsysteme GmbH Nodpfx Absw Sdxyjbekt Vrsta vozila: Tandem prikolica Tip št.: H692.03 Leto: 2003 Dovoljena skupna masa: 2600 kg Obremenitev osi: 1–1300 kg / 2–1300 kg

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Keep your cool – even as temperatures rise! With soaring summer temperatures, reliable cooling in production environments is more critical than ever. At ONI, we provide powerful rental cooling systems perfectly tailored for industrial use. Whether as a replacement for failed equipment, to supplement inadequate cooling capacity, or for general climate control, we offer the right solution for your production needs. Our product range includes: - Chillers from 10 to 10,000 kW cooling capacity - Multiple configurations, including pump-tank units with integrated regulation and control systems - Containerized cooling systems complete with all necessary fittings and control components - Cooling towers, dry coolers, and pump-tank systems with full regulation and control modules The benefits for your production: Nedpfxsxbzafs Abbskt - Prevent production downtime with dependable machine cooling - Maximum efficiency with minimum energy consumption - Zero capital expenditure, thanks to flexible rental options tailored to your requirements - Immediately operational during maintenance, malfunctions, or peak seasonal demand - Flexible connectivity for almost any site infrastructure - 24/7 hotline and service – support also available for non-ONI equipment Plan ahead – avoid breakdowns We design holistic cooling strategies before urgent needs arise, ensuring you’re prepared for tomorrow’s challenges. Contact us for a no-obligation consultation. We’ll show you how to secure your production cooling while minimizing both costs and operational risks.

Stanje: zelo dobro (rabljeno), Clint vodni hladilnik, ki je ohlajal orodje za Multivac termoformirni stroj. Skoraj novo stanje. Nodpjumay Usfx Abbekt

Stanje: rabljeno, Osmosis / Water Treatment System with Heyl Testomat 2000 For further details and scope of delivery, please refer to the photo. Technical data can be found on the nameplate. Item condition: used, untested Sample pictures Nedotzxuyspfx Abbjkt An inspection in Rietberg is possible! For further questions, please contact us by email. Sale is exclusively to commercial customers, for business purposes only, and with exclusion of any warranty for material or legal defects! By making a purchase, you confirm that you are acting in a commercial or self-employed professional capacity. Otherwise, you will be violating our terms and conditions!

Leto izdelave: 2010, Stanje: rabljeno, številka stroja/vozila: 211/215351, GRP spill containment tray with official construction approval .12-227Z-40 Collection volume: 150 liters Nkedpjvimtqefx Abbst Load capacity: 250 kg Material: GRP (glass fiber reinforced plastic) Dimensions (L x W x H): 1,200 x 800 x 190 mm Equipped with locking lugs for pallet placement Approximate weight: 25 kg

Leto izdelave: 2013, Stanje: dober (rabljeno), številka stroja/vozila: 3063, The cost-effective discharge of condensate for your compressor. The oil is separated from the water using a filter set. The filter set is included in the scope of delivery. Nkjdsqmmffspfx Abbet The treated water (only when used with the filter set) meets the requirements for discharge into the sewer system. Warranty and guarantee are excluded in this listing. Price on request.

Leto izdelave: 2017, Stanje: dober (rabljeno), številka stroja/vozila: 4068, The cost-effective drainage solution for condensate from your compressor. The oil is separated from the water by means of a filter set. The filter set is included in the scope of delivery. The treated water (when used with the filter set) meets the requirements for discharge into the sewer system. Warranty and liability are excluded in this listing. Price on request. Nodpeqmmvrjfx Abbokt

Leto izdelave: 2016, Stanje: dober (rabljeno), številka stroja/vozila: 3385, The cost-effective drainage solution for condensate from your compressor. The oil is separated from the water using a filter set (PLEASE NOTE: the filter set is not included in the scope of delivery). The purified water (only when used in conjunction with the filter set) meets the requirements for discharge into the sewage system. Warranty and liability are excluded in this listing. Price upon request. Nksdpfx Absqmmkkebet

Leto izdelave: 2017, Stanje: dober (rabljeno), številka stroja/vozila: 4789, The cost-effective solution for condensate drainage for your compressor. The oil is separated from the water using a filter set (PLEASE NOTE: the filter set is not included in the delivery scope). The treated water (only when used with the filter set) meets the requirements for discharge into the sewer system. Nkedpfx Asqmmcgsbbst Warranty and guarantee are excluded in this listing. Price on request.

Leto izdelave: 2017, Stanje: dober (rabljeno), številka stroja/vozila: 4066, The cost-effective solution for condensate drainage for your compressor. The oil is separated from the water using a filter set. The filter set is included in the scope of delivery. The purified water (only when using the filter set) meets the requirements for discharge into the sewer system. Nksdpfx Aoqmmvcobbst Warranty and liability are excluded in this listing. Price on request.

Stanje: pripravljen za uporabo (rabljen), Odvodnjevalno sito Schauenburg Znamka: Schauenburg Površina: 3200 x 800 mm – 1 paluba Nsdpfxsud En Ro Abbskt Pogon: 2 kosa elektromotorjev po 5,5 kW vsak

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, TECHNICAL DETAILS Application area: Bottling of water without CO₂ Installation location: Mineral water factory in France Performance and Capacity Max. output: 32,000 bottles per hour Bottle size: 1.5 l Suitable neck finish: 29/25 Capping System Capper: Zalkin Number of capping heads: 18 Closure pick-up: Pick-and-place system Nedpjv Iqpaofx Abbekt Closure feeding: yes Enclosure: yes Operating Direction Direction of operation: clockwise (left to right)

Stanje: zelo dobro (rabljeno), Motan DH-1 N-A/B Portable Instant Water Heater You are purchasing a fully functional instant water heater from Motan. The unit originates from Bundeswehr stocks and is in very good condition. Versatile uses, e.g., as a pool heater The top choice for rapidly heating swimming pools. A 100 m³ pool can be heated to 30°C in just 3 hours. No faster way to heat up water. Ideal for use in locations without access to electricity: youth camps, weekend houses, construction sites, camping. Its effective output can be continuously adjusted from 40.5 kW to 128 kW. Despite its high performance, the device remains portable at a weight of only 130 kg. Thanks to the adjustable water temperature range from 30°C to 90°C, it offers great flexibility—for example, as a hot water generator for tent camp showers or general hot water supply. Njdpfxoulgh Ne Abbjkt Also perfect for Koi tanks and Koi ponds. Technical data: Output: 35,000 kcal/h to 110,000 kcal/h, continuously adjustable (40.5 kW to 128 kW) Max. water throughput: approx. 3,600 l/h Water temperature at maximum heating output: At maximum water flow, the temperature increase is approx. 30°C, i.e., with a 10°C water inlet temperature plus 30°C increase = final temperature of 40°C. Drive: Petrol engine Fichtel & Sachs, Stamo 75, Displacement: 75 cc Power: 2.5 HP at 4,500 rpm Consumption: approx. 1.8 l/h mixture 1:25 (for the engine!) For the burner, depending on water volume, max.: 24 l/h gasoline at max. flow of 3,600 l/h Tank capacity: 5 liters Dimensions: Width: 500 mm, Length: 1,040 mm, Height: 850 mm Weight: approx. 130 kg Manufacturer’s price: €8,000 More new and used items available in our shop! International shipping costs upon request!

Stanje: zelo dobro (rabljeno), Blobel one-sided pivoting containment barrier The ideal solution for securing the area around a lifting platform or dock leveller. This barrier is permanently installed and pivotable on one side, easy to operate, versatile in application, and can be flexibly upgraded from manual to automatic operation. The pivot and clamping mechanism is securely mounted adjacent to the opening to be protected and sealed against the building structure. The barrier body is bolted into the pivot joint and, when not in use, remains in a vertical resting position beside the opening. It is secured against accidental lowering in compliance with accident prevention regulations (UVV). For operation, the barrier is unlocked, swung down, and locked into the clamping device. The contact pressure of the clamping lever is adjustable to ensure reliable sealing. The barrier body is manually lowered in the standard version; an automatic upgrade is available as an option. Brackets and barrier bodies are preferably powder-coated in RAL 3020 (traffic red). All other metal parts are galvanized or made of aluminium. Suitable for crack-free surfaces with minor floor unevenness, such as concrete, patterned and checker plate to DIN 59220, tiles, or stone. Nsdpfx Abjwykdmsbskt Versatile application Manufacturer: Blobel Model: BL031 Product No.: Containment barrier BL/ BED Length: 3710 mm Height: 250 mm Colour: RAL3020 traffic red More products – new and used – can be found in our shop! International shipping costs on request!

Leto izdelave: 2014, Stanje: dober (rabljeno), Technical Data – Condenser Maximum volumetric flow rate: 300 m³/h Condenser overall dimensions (as delivered): approx. 430 mm x 1610 mm (height) Cylindrical section: approx. Ø 273 mm Weight of chamber (as delivered): approx. 80 kg Upper section volume (condenser): approx. 30 L Lower section volume (reservoir): approx. 28 L Elastomer material: NBR / FKM / PTFE Maximum condenser temperature: 1 to 80°C Maximum condenser vacuum: 0 to 1000 mbar (absolute) (Condenser not suitable for overpressure!) Maximum heat exchanger temperature: 1 to 80°C Working medium (heat exchanger): Water Maximum heat exchanger water pressure: 10 bar Heat exchanger material: Tin-plated copper Nodpocpwhbefx Abbekt Condenser material: Stainless steel For technical inquiries or other sizes, please contact us.

Stanje: novo, Leto izdelave: 2025, Complete sample system for water bottling up to 3,000 cycles/h. Includes blow molding machine (blow molding machine with 4-blow stations, air drying system, compressed air compressor, chiller), table for bottle feeding, automatic rinsing/filling/capping machine, cap feeder, inspection box with lamps, drying unit, automatic shrink labeling machine, inkjet coder, automatic wrapping machine, and conveyor system. Production process: Bottle blowing > Bottle rinsing > Bottle filling > Bottle capping > Lamp inspection > Shrink labeling > Thermal shrinking > Inkjet coding > Packaging. Specifications: 3,000 cycles/h (at 500ml each); bottle volume: 350-1,500ml; PET bottles; standard 28/30mm PET caps; 1,500 liters of water filled per hour; 500 liters rinse water consumption per hour; gravity filling; 24 bottles per multipack. Specifications depend on the final layout and the customer-specific combination of machines and modules. Nodpfxev Nla As Abbokt Please note that our new prices are often lower than the usual used prices. Feel free to contact us and specify your packaging requirements. - We typically have 30-50 different new machines available from stock at any time. For machines made to customer specifications, we also offer very short lead times from approx. 3 weeks. - All machines come with a full warranty.

Stanje: novo, Leto izdelave: 2025, Automatic water filling system for up to 300 cycles per minute. Includes feeding system for empty bottles into the 40-head rotary rinsing unit. Rotary filling station (40 heads) with gravity filling system. The capping unit features 12 capping heads and is suitable for 28mm and 30mm PE standard caps. All parts in contact with the product are made of SS304 or food-grade plastic. The frame is made from high-quality Q235 hardened steel (optionally SS304). MITSUBISHI PLC, WEINVIEW touchscreen. Nkodpsv Nlaijfx Abbet Specifications: max. machine output (no load): 300 cycles/minute; Number of rinsing heads: 40; Number of filling heads: 40; 12 capping heads; Bottle volume: 350-2000ml; Bottle diameter: 50-90mm; Bottle height: 150-310mm; Filling tolerance: +/- 2%; Compressed air: 0.5m³/6bar; Filling water: 9m³/h; Rinsing water: 3m³/h; Power supply: 380V, 7.5kW; Machine dimensions: L4300xW3400xH3050mm; Weight: 12,000kg. Please note that our new prices are often below typical used equipment prices. Feel free to contact us and let us know your packaging requirements. – We usually have 30-50 different new machines in stock and ready for immediate delivery. For customer-specific machines, we offer very short lead times starting from approx. 3 weeks. – All machines are available with full warranty.