Vertikalne Žage nakup rabljenega (4.147)

Stanje: novo, Cutting diameter: 255 mm Saw band length: 2765 x 0.9 x 27 mm Cutting width: 300 x 180 mm Blade speed: 35 + 70 rpm Total power requirement: 1.8 kW Machine weight approx.: 450 kg Space requirement approx.: 1.7 x 1.23 x 1.75 m SPECIAL OFFER PRICE!!! Double miter metal band saw, frequency inverter hydraulics, semi-automatic GBS 250 Super HA-I Easy • Miter cutting left 60° / right 45° • Material height sensor (automatic cut start detection) • Frame and gearbox cast in one piece – very quiet and low vibration operation • Hydraulic vise, laterally adjustable Guodpfxjfn Ando Afqec • Precision industrial-grade bearings • Heavy-duty vise and cast frame • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter • Feed pressure regulator • Support roller (infeed side) • Ball-bearing mounted turntable Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid downfeed to material start, or proceed directly with cutting for serial cuts 4. Stop saw blade 5. Raise frame just above the material 6. Open vise

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900 x 900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions L x W x H: 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-level sawing technology and optimal performance for cutting special steels. • The electro-welded machine frame and steel saw frame fulfill all cutting requirements and eliminate vibrations and noise. • The chip conveyor is hydraulically driven and speed adjustable. • All machine movements (saw frame, vice, feed, saw band guides) operate using modern linear guides with high static and dynamic load capacity, ensuring extremely low sliding friction. • Another key feature is the material positioning rollers, driven by a hydraulic motor. They move at a right angle to the material, allowing optimal material clamping. • Thanks to the height control of the saw band position, the operator can place the band close to the top of the material. After the cut, the band automatically returns to its previous position. Remaining in the lower position can also be selected as an alternative. During the cutting cycle, the software compares cutting load with preset parameters, allowing the sawing system to stop if irregularities are detected. • The saw band is cleaned by two adjustable steel brushes, driven hydraulically. • The hydraulic unit, including filter and pressure gauge, ensures exceptionally smooth operation at constant pressure. • Finely ground carbide inserts that clamp the saw band, complete with side-hardened and adjustable guide rollers. The adjustable band guide moves automatically as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder controlled by the machine software. Tension is automatically relieved after a set period if the machine is in standby mode or after a cycle has finished. • Automatic CNC-controlled versions are available in the X-TECH 900 / 1200 models, with a feed length of 500 mm for the high-production series. • The material is supported by a table with seven rollers, driven by a hydraulic orbital motor, to ensure precise positioning even under maximum load. • All guided movements are operated by four recirculating ball guides with a high capacity for static and dynamic loads, significantly reducing feed friction. Hardened and ground prismatic guides. Price on request. Gsdpefg E Hpefx Afqouc

Stanje: novo, Cutting capacity at 90°: round 310 mm Cutting capacity at 90°: square 280 mm Cutting capacity at 90°: rectangular 400x250 mm Saw blade length 4020x34x1.1 mm Blade speed 37 + 74 m/min Table height 940 mm Total power requirement 1.8/2.2 kW Machine weight approx. 0.68 t Space requirement approx. 1.5 x 1.78 x 1.3 m SPECIAL PRICE!!! Double miter bandsaw, hydraulic semi-automatic, GBS 310/400 HA-I Easy • Mitre left 60° + right 45° • Industrial hydraulics, powerful 18 bar • Optimum access to material • Ammeter for monitoring: - Cutting force optimization - Blade service life - Cutting performance • Vice opens/closes hydraulically • Chip removal brush • Material rotary table with ball bearings • Quick-release vice, adjustable • Material height sensor (automatic detection of cutting start) Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid descent to material start, or direct cutting in serial operation Gedjd Iiptopfx Afqeuc 4. Switch off saw blade 5. Raise frame just above material 6. Open vice

Stanje: novo, Cutting capacity at 90°: round 250 mm Cutting capacity at 90°: square 210 mm Cutting capacity at 90°: rectangular 290 x 210 mm Saw band length: 2,965 x 27 x 0.9 mm Table height: 940 mm Band speed: 35 / 70 m/min Total power requirement: 1.1/1.3 kW Machine weight approx. 0.35 t Required space approx. 1.3 x 0.8 x 1.5 m SPECIAL OFFER PRICE!!! Double mitre metal bandsaw, hydraulic semi-automatic, equipped with: - Hydraulic vice - Material height sensor - Cut monitoring via ammeter - Adjustable cutting pressure feed regulator Gedpfxod Iip Ro Afqjuc - Band speed 34 / 74 m/min - Mitre cuts up to 60° left and 45° right - Patented ball-bearing turntable for easy mitre adjustment - Rapid-action vice, movable - Quick-release lever - Automatic coolant system Shipping cost share: 120 EUR

Stanje: rabljeno, Massive EWD EW1000 carriage for band sawmill Hydraulic block band saw carriage 5 clamping heads Double V-turner Slab turner Hydraulics Control cabinets Maximum distance to saw blade: 1000 mm Clamping jaw opening: 900 mm Gjdpjqwnziefx Afqeuc Distance between clamping heads: 1000 mm - 1450 mm - 2050 mm - 3000 mm Distance between outer clamping heads: 7500 mm Track gauge: 1300 mm Overall length: 9000 mm Overall width: 2450 mm Overall height: 1750 mm Available immediately Already dismantled and ready for loading Without saw, without saw frame

Stanje: novo, Cutting diameter: 300 mm Cutting capacity at 90° flat: 330 x 260 mm Cutting capacity at 90° square: 260 x 260 mm Cutting capacity at 45° flat: 270 x 200 mm Cutting capacity at 45° round: 260 mm Cutting capacity at 45° square: 250 x 250 mm Cutting capacity at 60° flat: 170 x 170 mm Cutting capacity at 60° square: 170 x 170 mm Cutting capacity at 60° round: 180 mm Blade speed range: 40 / 80 m/min Saw blade dimensions: 3320 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Semiautomatic electrohydraulic bandsaw SHARK 332 SXI EVO with semi-automatic dynamic and manual operation, equipped with MEP-28 control system for mitre cuts from 45° right to 60° left. Some features: - New centralized control panel mounted on an articulated arm. - Low voltage operating unit: - Polyester membrane keypad with thermoformed raised pushbuttons and actuation feedback signal. - Display shows: * Diagnostics (messages in user language) * Alarms (description of alarm causes) * Status of inputs and outputs * Cut counter * Cutting time per cycle * Saw band motor current draw * Saw band tension * Saw band speed * Numeric display of head position. - Manual 24V IP55 cycle selector switch. - Complete cycle program for all special cutting operations. - Identification of additional special cutting cycles for specific applications. - Latest generation, high-performance hydraulic control unit with low energy consumption. - Rotating table (mounted on 420 mm roller bearings with preloaded thrust bearing). Gusdpfxsfg E H Uj Afqsc - Two band speeds (40/80 m/min.) with control system. - Designed to accommodate an electronic inverter for stepless band speed adjustment from 20 to 90 m/min. - Bow stroke programmable directly from the control panel for adaptation to the material being cut. - Sliding clamping device, adjustable left and right, with quick-release vice. - Manual blade tensioning control with display via electronic converter. - Base frame designed for complete coolant recovery, even during maximum angle cuts. - Coolant tray (equipped with electric pump for blade lubrication and cooling) and swarf drawer (can be replaced with a chip conveyor – see special accessories) integrated into the base frame. - Ready for optional minimal blade lubrication kit (in addition to standard coolant system with emulsifying oil). - Swarf removing brush. - Machine is suitable for pallet truck transport. - Adjustable length stop for repeat cuts of the same length. - Material support arm with roller for securing the loading table. - Bimetal saw blade suitable for solid and profile materials. - Tool kit and operating manual in the respective user language.

Stanje: novo, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 220 mm Cutting capacity at 90° (square): 220 x 220 mm Speed range: 36 / 72 m/min Saw blade dimensions: 2950 x 25.4 x 0.9 mm Gujdpfxjfg E H Rj Afqjc Machine weight: approx. 0.4 t Dimensions (LxWxH): 1.5 x 0.9 x 1.5 m Semi-automatic function: The vice closes and the motor starts; the saw head lowers for the cut, the motor switches off, the saw head lifts, and the vice opens. Some features: - New centralized control console on a pivoting arm. - Latest-generation hydraulic control unit, highly efficient with low energy consumption. - Base frame with pull-out coolant tank. The machine fully complies with all CE regulations!

Stanje: novo, Cutting diameter: 300 mm Saw band length: 3320 x 27 x 0.9 mm Band speed: 40/80 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 670 kg Operating principle in CCS version: After advancing the material and closing the vices, the cutting process is initiated. The lowering occurs by the weight of the saw arm itself, is balanced by a spring, and regulated by a hydraulic brake cylinder. Once the cut is complete, the saw arm is manually lifted to the required position for material feeding. Electrical control panel (labeled wiring connections, indicator light for operational readiness, main safety switch with provision for padlock, selector or speed change switch, emergency stop, thermal-magnetic protection, 24-volt low voltage system). Electronic tension converter for the saw band with on-screen display. Manual vice with quick-release lock. Base with coolant tray and chip drawer, which can be replaced by a motorized chip conveyor (accessory). Electric coolant pump for cooling and lubricating the saw band. Chip removal brush. Adjustable precision stops for making identical length cuts. Machine is designed for pallet truck transport. Bimetal saw band for solid and profile material. Tool kit and operating instructions included. Guedpofg E H Tefx Afqjc

Stanje: zelo dobro (rabljeno), GreCon Type 2004 Optimizing Cross-Cut Saw with infeed cross conveyor with outfeed conveyor belt featuring 4 ejectors Guodon Hwl Aepfx Afqec with chain bed Technical Specifications: Max. workpiece width: 250 mm Max. workpiece thickness: 80 mm Saw blade diameter: 450 mm Cutting speed: 90 m/sec. Saw motor: 5.5 kW Saw shaft control: pneumatic Chain drive: servo motor Min. working width: 40 mm Min. infeed length: 500 mm Net weight: approx. 1,800 kg Was completely overhauled and then not used again Location: Austria, near Ried im Innkreis

Stanje: zelo dobro (rabljeno), HSS saw beveling machine PERUZZI model SAUT 550, completely overhauled and newly painted, like new Gujdohzcctopfx Afqsc

Stanje: zelo dobro (rabljeno), HSS saw grinding machine SCHMIDT TEMPO model ECE 45 Guedpfx Afsx Hp Tmjqsc

Stanje: pripravljen za uporabo (rabljen), Stroj za upogibanje zob krožnih žag MEINERT model P.H. Guodpjxrcz Eofx Afqec

Stanje: zelo dobro (rabljeno), Brusilni stroj za CV žage Heller model SA315 Guedpfxextbtcs Afqoc

Stanje: zelo dobro (rabljeno), Brusilni stroj za HSS žagine liste LOROCH model Ekostar 760, letnik 2008 Guodjw Hrvqopfx Afqec

Stanje: zelo dobro (rabljeno), Leto izdelave: 1984, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 137, skupna širina: 2.800 mm, skupna dolžina: 700 mm, skupna višina: 1.700 mm, vrsta vhodnega toka: trifazni, Band saw blade grinding machine Risstaler riv Rivo 200 GA Year of manufacture: 1984 Different tooth profiles selectable Operating manual available Gsdpfx Afswd N Dajqeuc Feed rate: 30 or 60 teeth per minute

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Tip: BAS Maksimalna širina varjenja do 50 mm. Varilni stroj za čelno varjenje. Ročno vpenjanje. Širina rezila do 50 mm. Rabljeni stroj v delujočem stanju. Stroj je prebarvan. Varjenje tračnih žag za les do 50 mm. Varjenje tračnih žag za kovino do 34 mm. Dobava iz zaloge. Priklop: 220 V. Teža: ca. 180 kg. Gusdpfx Afow Snu Soqsc Pakiranje vključeno.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, Avtomatski brusilni stroj za žagalne liste za okvirne žage s mokrim brušenjem. Premer brusilne plošče 250 mm. Razmak med zobmi 25 mm. Lokasti zob. Popolnoma avtomatiziran postopek brušenja. Naprava za mokro brušenje s črpalko in rezervoarjem. Nekaj novih rezervnih delov. Pripravljeno za demonstracijo. Guedjyt I Hqspfx Afqoc

Stanje: pripravljen za uporabo (rabljen), Brusilnik, ostrilo za tračne žage Bratstvo Lignum. Stroj je kompleten in tehnično brezhiben. Lahko je dodatno opremljen z valji za držanje tračnega lista. Gedpfxjxx Uxie Afqsuc

Stanje: rabljeno, Slotting head for milling machine, milling head, CCCP / USSR STANKO Type 1502 No.: 200 Year of manufacture: 1974 Stroke length: max. 60 mm Strokes: approx. 200 - 500 strokes/min. Tool holder: 12 x 17 mm with clamping plate Hole spacing on machine flange plate: 245 x 185 mm Mounting hole: Ø 17 mm Centering diameter on the machine flange plate: 190 mm - Stroke length adjustable via eccentric adjustment - Drive is the same as for the regular vertical head, powered by the machine gearbox - Drive via driver, concentric to the centering diameter - Degree scale on the flange plate, continuously swivels +/- 45° - This slotting head is mounted in place of the standard vertical milling head / milling head (Installation instead of the vertical milling head, milling head) Weight: 42 kg Good condition Godpfx Afjd Dk A Ajqeuc Slotting head inventory no. 58166 and vertical milling head inventory no. 58164 from identical STANKO milling machines.

Stanje: rabljeno, Leto izdelave: 1973, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 610, Prodam napravo za natezanje zob Wilhelm Meinert za žagine liste do premera 1000 mm. Popolnoma funkcionalna, dostavljena nam je bila kot del linije za izdelavo tramov, vendar je nikoli nismo uporabljali. Godpfjyg Hb Hsx Afqsuc

Stanje: novo, Cutting diameter: 220 mm Saw band length: 2455 mm Table height: 850 mm Cutting width: 230 mm Cutting speed: 25 - 80 m/min Saw band dimensions: 2455 x 27 x 0.9 mm Cutting capacity at 60° round: 90 mm Cutting capacity at 60° square: 90 mm Cutting capacity at 60° flat: 90 x 100 mm Cutting capacity at 45° round: 150 mm Cutting capacity at 45° square: 150 mm Cutting capacity at 45° rectangular: 150 x 210 mm Cutting capacity at 90° round: 220 mm Cutting capacity at 90° square: 210 mm Gjdpfxed Iip Tj Afqouc Cutting capacity at 90° rectangular: 230 x 185 mm Total power requirement: 1.2 kW Machine weight: approx. 0.24 t Space requirement: approx. 1.2 x 0.6 x 1.7 m SPECIAL OFFER PRICE!!! -Mitre cuts up to 60° to the left -Cutting speed 25 - 80 m/min -Vice with quick-release mechanism -Carbide saw band guide -Band tension control -Electric coolant system Auto-Cut System = 3-stage system: -Automatic saw frame descent via hydraulic cylinder -Infinitely variable feed rate -With limit switch -Rapid descent of the saw frame from home position to workpiece, then switches to normal feed rate -Manual operation

Stanje: novo, Saw blade diameter: 370 mm Cutting capacity at 90 degrees: round 120 mm Cutting capacity at 90 degrees: square 100 mm Cutting capacity at 90 degrees: rectangular 180 x 100 mm Working height: 925 mm Saw blade speeds: 17 - 70 rpm Total power requirement: 3.0 kW Space required: approx. 1.9 x 1.45 x 2.1 m SPECIAL PRICE!!! High-performance vertical circular saw, hydropneumatic fully automatic. (20195) · Mitre cuts: left 60° and right 45° · Hydro-pneumatic control of the saw unit · Electro-pneumatic material feed unit · Smooth-running, powerful worm gear drive with large gear ratio, integrated in a robust cast housing to achieve optimal cutting results · Vice with double clamping arm for burr-free cuts, additionally with lateral quick adjustment for mitre changes · Precision prismatic guide for the gear head, laterally adjustable · Particularly sturdy base frame with integrated automatic cooling system · Large chip drawer · Chip removal brush integrated in the saw blade guard Gusdpfxjd Iin Ee Afqoc CNC Control: · With keypad for over 90 different sawing programs, with 99 subprograms for length, quantity, and angle · Automatic feed unit 2,000 mm via ball screw spindle, incremental feed with automatic length compensation. Adjustable for cut lengths from 25 – 9,999 mm. · Fully hydraulic control of saw frame and clamping devices · Preselection of 3 different material feed rates · Visualization of the entire work process with simple data entry NOTE: Price does not include saw blade! (Saw blade price: 204,- EUR)

Stanje: novo, Saw blade diameter: 370 mm Cutting capacity at 90 degrees (round): 120 mm Cutting capacity at 90 degrees (square): 100 mm Cutting capacity at 90 degrees (rectangular): 180x100 mm Working height: 925 mm Saw blade speeds: 15 - 70 rpm Total power requirement: 1.8/2.2 kW Machine weight: approx. 0.71 t Space requirement: approx. 1.9 x 1.45 x 2.1 m SPECIAL OFFER PRICE!!! High-Performance Vertical Circular Saw, Hydropneumatic Fully Automatic (20192) · Mitre cutting left 60° / right 45° · Hydro-pneumatic control of the saw unit · Electro-pneumatic automatic material feed unit · Smooth-running, high-performance worm drive with large gear ratio, integrated into a robust cast housing for optimal cutting results · Vise with double clamping arm for low-burr cuts, additionally with quick lateral positioning for mitre adjustment · Precision prismatic guide for the gearbox head, laterally adjustable · Particularly stable base frame with integrated automatic coolant system · Large chip drawer · Chip removal brush in the saw blade guard MPS control system: · Storage of cut start/end positions · Display of current consumption, piece count, cutting time... Gjdpfx Ajd Iin Hjfqsuc · Adjustable water cooling · Cutting pressure regulator IMPORTANT: Price does NOT include saw blade! (Saw blade price €204)

Stanje: novo, Cutting diameter: 220 mm Saw band length: 2455 mm Table height: 850 mm Cutting width: 230 mm Cutting speed: 35 + 70 m/min Saw band dimensions: 2455 x 27 x 0.9 mm Cutting capacity at 60° round: 90 mm Cutting capacity at 60° square: 90 mm Cutting capacity at 60° flat: 90 x 100 mm Cutting capacity at 45° round: 150 mm Cutting capacity at 45° square: 150 mm Cutting capacity at 45° rectangular: 150 x 210 mm Cutting capacity at 90° round: 220 mm Cutting capacity at 90° square: 210 mm Cutting capacity at 90° rectangular: 230 x 185 mm Total power requirement: 1.2 kW Machine weight approx. 0.24 t Space requirement approx. 1.2 x 0.6 x 1.7 m SPECIAL PRICE!!! -Mitre cuts up to 60° left -Cutting speed 35 / 70 m / min -Vice with quick-release device -Carbide saw band guides -Band tension control -Electric cooling system Auto-Cut System = 3-stage system -Automatic saw frame lowering via hydraulic cylinder -Infinitely variable feed adjustment -With limit switch -Rapid lowering of the saw frame from resting position to the workpiece, then switch to normal feed rate Gusdpfx Afsd Iip Ujqsc -Manual operation Freight charge: EUR 85,-

Stanje: zelo dobro (rabljeno), SCM M3 multisaw - Working width: 300 mm - Cutting height: 120 mm - Motor power: 37 kW - Weight: 1,800 kg - Year of manufacture: 2003 - Max. element width: 100 cm - Min. element length: 40 cm - Stepless feed speed adjustment - Triple-row anti-kickback fingers - Spindle diameter: 50 mm - Sleeve diameter: 70 mm - Sleeve equipped with spacers and 5 saw blades, each 350 mm Gjdei Ewnaopfx Afqjuc - Blade diameter: 200 to 350 mm - Automatic central lubrication - Four upper pressure rollers - One set of keys Machine and chain conveyor in very good condition.