Večlistna Žaga nakup rabljenega (4.236)

Stanje: novo, Working range approx. 360 mm Working range, quadrant: 360 x 360 mm Working range, bundles (W x H): 180–280 x 50–160 mm Cutting speed: 20–100 m/min (stepless adjustment) Saw blade dimensions: 4,420 mm x 34 mm x 1.1 mm Saw blade tension: hydraulic Multiple feed: 500 mm Drive power: 3.7 kW Machine dimensions (L x W): 2,500 x 2,200 mm Machine weight: 2,300 kg Standard equipment - Hydraulically controlled full-stroke double vice clamping system - Drive via IE3 motor with frequency inverter (PMSM, equivalent to IE4) - User-friendly NC touchscreen control with high-end system (NCIII CONTROL) - Display of feed speed on HMI (10" HMI screen) - Automatic chip conveyor - Automatic shuttle feed - IC-board control for all electrical and hydraulic functions - Floating pendulum vice - Split front vice - Stepless speed control via inverter - Hydraulic blade tensioning - Roller bearings with hydraulically controlled carbide blade guiding system - Automatic workpiece height adjustment by quick-start sensor Ihsdpfx Afeqrqvho Tet - Preset cut counter with auto shut-off - Bundle cutting nesting device (hold-down clamp) - Power-driven blade cleaning brush - Saw blade monitoring for standstill and blade breakage - Washing hose for machine cleaning - Work lamp - Roller table, 2 m length - One M42 bimetal saw blade - One set of tools and toolbox

Stanje: dober (rabljeno), Leto izdelave: 1970, ne nagiben, dolžina sani 2600 mm 1250 mm desno od lista 380 V, 5,5 KM Ijdjx U A Erspfx Af Tsht zgornje odsesavanje

Stanje: zelo dobro (rabljeno), Delilna žaga ACM BS 940 RS3 s centrirnikom Ijdpfx Afoxanvwe Toht Premer koles: 940 mm Dimenzije rezalnih trakov: min. 6580x90x0,9 mm / max. 6670x90x0,9 mm Nagib mize: 0-20° Avtomatski centrirnik Podajalnik ARTIGLIO RSA 80 Hitrost podajanja nastavljiva z variatorjem Moč motorja: 11 kW Tehnična dokumentacija Teža: 1100 kg Zunanje dimenzije žage: 1660x1720x2900 mm

Stanje: dober (rabljeno), • Type: GS - 250 • Serial No.: 14 • Year of manufacture: 1999 • Dimensions min.: L1100 mm x W800 mm x H900 mm Isdpfsrgqp Nsx Af Tjht • max.: L1700 mm x W1300 mm x H900 mm • Power supply: 1 x 220V / 50Hz / 7.8 A • Connected load: 1500 W / 2800 RPM – 1 kW • Price on request

Stanje: rabljeno, številka stroja/vozila: 007829, Položaj 1: Strojna krožna žaga za plošče – podajanje spredaj SCHELLING-FH 4 430/220-P Položaj 2: Avtomatizirano skladišče SCHELLING-FH 4 430/220-P Ijdpswu Ahgofx Af Tsht

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, največja višina reza: 160 mm, največja širina rezanja: 450 mm, dolžina rezanja (maks.): 6.200 mm, moč: 15 kW (20,39 KM), premer žaginega lista: 550 mm, skupna dolžina: 8.100 mm, skupna masa: 2.700 kg, širina mize: 450 mm, vrsta nastavitve višine: mehanski, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, premer odprtine diska: 80 mm, premer ekstrakcijske šobe: 160 mm, delovna višina: 850 mm, priključek za stisnjen zrak: 6 letvica, trajanje garancije: 12 meseci, The FLS ECO 120 edging saw is the entry-level model in the FLS technology range. This saw is primarily designed for small to medium-sized operations focused on various wood processing tasks, but it is also suitable for non-wood materials. The single-blade FLS ECO 120 significantly increases work efficiency and material yield (by 10-15%) and can process cants, planks, beams, and large panel materials. The incoming material can be edged, resawn, trimmed, and used for producing cut-to-size pieces and lamellas. The maximum cutting height is 120 mm, optionally 160 mm. The saw can be operated by a single worker. The machine meets strict occupational safety requirements in accordance with relevant EU regulations and directives. Smooth feed and saw blade lift adjustment ensure clean cuts and high cutting performance. Blade changes are quick and, most importantly, safe thanks to the "ProLock" quick-release system. The saw carriage features guiding and lateral rollers that guarantee optimal tracking of the floating unit during cutting, minimizing unnecessary vibrations. The upper hold-down and adjustable wooden fence securely fix the material during cutting, eliminating unwanted movement. FLS technology offers unique fast and simple setup via ergonomically positioned controls with a touchscreen panel. Cutting width values can be entered manually or through the "Absolut" basic program, as well as via optional "Chain" or "Optim" programs. The intended cutting line is projected onto the material with a laser and subsequently guided longitudinally by the moving saw blade. Ihodpfx Aeubbubjf Tjt On the FLS saw, you can cut cants, beams, planks, and large panel materials. Input material can be edged, resawn, trimmed, cut at an angle or mitre, grooved, and processed into cut-to-size pieces and lamellas. The machine is ideal for manufacturers of panel boards, solid furniture, or staircases. The unit can also be used to process non-wood materials such as PUR/PIR panels, plastic-based materials, sandwich panels, aluminum, or cement-bonded particle boards.

Stanje: novo, Working range approx. 360 mm Working range, quadrant: 360 x 360 mm Working range, bundles (W x H): 180 - 280 x 50 - 160 mm Ijdpjwhli Hofx Af Tjht Cutting speed: 20 - 100 m/min (infinitely variable) Saw band dimensions: 4,420 mm x 34 mm x 1.1 mm Saw blade tension: hydraulic Multiple feed: 500 mm Drive power: 3.7 kW Machine dimensions (L x W): 2,500 x 2,200 mm Machine weight: 2,300 kg Standard equipment - Hydraulically controlled full-stroke double-vice clamping system - Drive by IE3 motor with frequency inverter (PMSM, equivalent to IE4) - User-friendly PC control with touch screen - Display of feed speed on HMI (10" HMI screen) - Automatic chip conveyor - Automatic shuttle feed - IC-board control for all electrical and hydraulic functions - Floating pendulum vise - Split front vise - Infinitely variable speed control via inverter - Hydraulic blade tension - Roller bearings with hydraulically controlled carbide blade guide system - Automatic work height control via quick-start sensor - Preset cut counter with automatic shut-off - Nesting device for bundle cutting (hold-down) - Powered blade cleaning brush - Saw band monitoring for standstill and band breakage - Cleaning hose for machine cleaning - Work light - Roller table, 2 m length - One M42 bi-metal saw blade - One set of tools and toolbox - Full enclosure

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, dolžina rezanja (maks.): 4.250 mm, največja višina reza: 120 mm, največja širina rezanja: 4.100 mm, glavni premer žaginega lista: 460 mm, moč: 21 kW (28,55 KM), Machine type: fh6 430-410 / HT220 / MCS-Evolution / Win 10 Cutting length: 4,250 mm Cutting width: 4,100 mm Year of manufacture: 2007 Maximum saw blade projection: 135 mm Maximum saw blade diameter: 460 mm Main saw motor: 21 kW Scoring unit Maximum scoring saw blade diameter: 200 mm Maximum package height: 120 mm Minimum package height: 3 mm Saw feed forward: 6 up to 150 m/min Saw feed reverse: up to 150 m/min Infeed: up to 80 m/min (Europe: forward 25 m/min according to EN 1870-13) Number of clamps: 7 grip push clamps Clamp opening: 125 mm Clamp lifting and lowering device Strip aligner before and after the pressure beam Air-cushion tables: 3 units (2100 x 700 mm) Machine table: Heavy-duty steel construction, "Closed Frame Construction" Finely machined steel table surface Cutting length automation Scissor lift table: - Panel width 2200 mm - Platform - Hydraulic unit - Max. load: 6.0 tons - Pusher carriage - Rack and pinion drive - Drive with frequency inverter - Drive shaft - Pusher: - Quantity: 2 units - Panel thickness ≥ 6 mm - Sensing spindle for automatic package height adjustment - Float-mounted - Angle stop on roller table - Length: 1450 mm, measured from the saw line - Solid steel welded construction - Precision-machined stop surface - Package aligner for longitudinal edges - Quantity: 2 units - For pusher loading - Liftable and lowerable alignment cam - Pneumatic alignment stroke - Counterholder: - Quantity: 2 units - For panel thickness ≥ 6 mm This machine is in very good condition and fully functional. The machine is overhauled, checked, and tested at our facility. Isdpslni T Ejfx Af Teht Errors and changes to technical data and information excepted! (Displayed photos are sample images)

Stanje: rabljeno, Leto izdelave: 2017, najv. širina reza: 4200 mm najv. višina reza: 2200 mm premer žaginega lista: 250 mm najv. debelina obdelave: 60 mm sredinska izvrtina žaginega lista: 30 mm spodnja podpora: plastične podloge podpora za material: izvlečne plastične letve merilni sistem: skala nagib glave žage: ročno pomik žage: ročno pritrditev: prosto stoječe Iodpsxg Igiefx Af Toht odsesavanje: zunanje zaklepanje žaginega nosilca: ročno Teža ca.: 1000 kg Mere: 5600 x 1700 x 3000 mm Moč motorja: 4,2 kW Lokacija skladišča: Nattheim

Stanje: novo, Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, dolžina tračnega lista: 4.780 mm, Polavtomatska tračna žaga za dvojne poševne reze za rezanje pod kotom levo in desno do 60°. Tehnični podatki: - Pogon žage 3,0 kW Iodpex U Augofx Af Tsht - Hitrost rezanja 20-120 m/min - Delovna višina pribl. 760 mm - Dimenzije žaginega traku 4780x34x1,1 mm Območja reza: 90° Ø 350 ali 510 x 350 mm 45° Ø 350 ali 415 x 100 mm 60° Ø 270 ali 280 x 100 mm

Stanje: rabljeno, Prodam na fotografijah vidno tračno žago italijanske znamke Imet, model 350 SHI-E. Stroj je mogoče preizkusiti in testirati njegove funkcije. Za naklad poskrbimo. Cena je brez DDV +23 % DDV Obseg rezanja: Kot 0° – okroglo 305 mm – kvadrat 250 mm – pravokotnik 350x200 mm Kot 45° – okroglo 250 mm – kvadrat 230 mm – pravokotnik 230x200 mm Kot 45° – okroglo 250 mm – kvadrat 230 mm – pravokotnik 230x200 mm Kot 60° – okroglo 175 mm – kvadrat 155 mm – pravokotnik 170x100 mm Iedpfex Ur E Isx Af Teht Višina mize: 940 mm Velikost rezalnega traku: 3370 x 27 x 0,9 mm Hitrost traku: 37 - 74 m/min Moč motorja: 1,8 kW Dvig roke: hidravlični Spuščanje roke: gladek pomik Primež: hidravlični Dimenzije stroja: 1500 x 1800 x 2000 mm Teža stroja: cca 700 kg

Leto izdelave: 2007, Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 280431, Schüco PDG E-Cut 500 Iodpfx Afeyahqcs Teht - Schneidscheiben mit einem Durchmesser von 500 mm Die Schüco PDG 500 ist eine robuste Metallbearbeitungsmaschine, die für eine effiziente Produktion konzipiert wurde. Anwendungsbereich: Für präzise Gehrungsschnitte an Aluminiumprofilen ausgelegt. Schneidscheiben: Ausgestattet mit zwei horizontalen Schneidscheiben mit einem Durchmesser von 500 mm. Motor: In der Regel 2x 2,2 kW oder 2x 3 kW, mit einer Drehzahl von 2800 U/min. Winkelverstellung: Die Schneidköpfe sind dank Servomotor stufenlos schwenkbar (typischerweise von 45° bis 20° nach außen/innen) und ermöglichen höchste Präzision. Steuerung: Menügeführte, intuitive Bedienung über die Tastatur des Bedienpanels, meist mit Profilvisualisierung und Spannbackenpositionierung. Effizienz: Das Doppelkopfdesign ermöglicht das gleichzeitige Schneiden beider Profilenden und halbiert somit die Produktionszeit. Die Maschine kann direkt über die SchüCal Software angesteuert werden, was die Verwaltung von Zuschnittlisten erleichtert. - Exportpreis - Möglichkeit des Transports (nur nach Besichtigung oder Zahlung) - Zustand wie auf den Bildern / Video vom Betrieb kann zugesendet werden oder Sie testen die Maschine vor Ort in unserem Unternehmen Exportpreis Sie können dieses Gerät in Polen – Piwniczna Zdrój – 120 km von Krakau – besichtigen.

Stanje: rabljeno, številka stroja/vozila: 003935, Maks. širina panela: 1200 mm Maks. višina panela: 40 mm Ijdpfx Afowuckne Tjht Maks. hitrost pomika: 60 m/min Delovni agregati: 3 kos

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, dolžina rezanja (maks.): 4.250 mm, največja višina reza: 80 mm, največja širina rezanja: 4.300 mm, glavni premer žaginega lista: 350 mm, moč: 15 kW (20,39 KM), Machine type: fh4 430 HT220 ERB / MCS-Evolution Cutting length: 4,250 mm Cutting width: 4,300 mm Year of manufacture: 2008 Max. saw blade projection: 95 mm Max. saw blade diameter: 350 mm Main saw motor: 15 kW Scoring unit Max. scoring saw blade diameter: 300 mm Automatic cutting length Motorised, adjustable scorer unit Max. package height: 80 mm Saw feed forward: up to 120 m/min Saw feed backward: up to 120 m/min Infeed: up to 80 m/min (Europe: forward 25 m/min according to EN 1870-13) Number of clamps: 7 grip push clamps Clamp opening: 90 mm Push-off carriage with 2 pushers Package aligner for longitudinal edges Strip aligner before and after the pressure beam Air cushion tables: 3 pcs., 2100 x 600 mm Spindle lift table: - Panel width: 2200 mm - Integrated roller conveyor Isdpfx Aeqi Azpjf Tsht Feeding roller conveyor: - Length: 4600 mm - Width: 2200 mm - Transport direction: longitudinal - Cut-outs for forklift This machine is in very good condition and is fully operational. It will be overhauled, inspected and tested in our facility. Subject to errors and changes in technical data and information!

Stanje: rabljeno, Leto izdelave: 2005, Funkcionalnost: nepreverjeno, Dražba: Zaprtje tovarne Roschmann, Gersthofen (Augsburg) Ponudite zdaj – prodaja najboljšemu ponudniku. Lot 2910020: Lot sestavljen iz 1 rabljene krožne žage za kovino z 2 hitrostma v dobrem stanju. Kaže zmerne sledi uporabe iz industrijskega okolja. Lastnosti: ročno upravljanje, integriran primež, vrtljaji: 30/60 min⁻¹. Električni podatki: 400 V, 50 Hz, 3 faze. Iodpfxsx N Nlbe Af Toht

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1980, Premer žaginega lista: 400 mm Območje reza pri 90° okroglo: 120 mm Pravokotno: 200 x 80 ali 150 x 70 mm Pri poševnem rezu pri 45° pravokotno/plosko: 150 x 70 mm Navpično: 100 x 60 mm Ihsdpfxex Anl De Af Tjt 2 hitrosti rezanja z motorjem z menjalnimi poli: 19 in 28 m/min Hitrost podajanja hidravlično brezstopenjsko nastavljiva: 0 - 1000 mm/min Pogonski motor: 380 V, 1,7/2,6 kW Teža: ca. 850 kg Potrebni prostor: 1200 x 1100 x 1620 mm

Stanje: zelo dobro (rabljeno), Panel saw FKS 550-3200 M A PRO, - Year of manufacture: 2023 - Max. cutting height: 200 mm - Cutting height: 200/140 mm - Cross cut width left of saw blade max. 3200 mm Ihedpfxjxfku Te Af Tet - Cutting width with parallel fence: 1450 mm - Saw blade tilting: 90 – 45° - Dimensions LxWxH in mm: 3,386 x 3,703 x 1,330 - Main saw blade with belt drive and speeds 2800/3665/4800 rpm - Vibration-free operation due to high own weight (1,070 kg) - Large outrigger table with material roller - Parallel fence with round bar guide - Extendable aluminium rip fence with digital display (2 flip stops) - Four-way ball-bearing format sliding carriage with double-roller anodised aluminium, high torsional rigidity - Large swinging safety hood with gas pressure spring - Multiple locking positions on sliding table - Motorised saw blade tilt & height adjustment with digital display - 8.8 kW main motor - Saw blade clamping via tool-free Rapid system - Saw unit can be switched on and off - On/off switch on carriage - Cutting length: 3200 mm

Stanje: novo, Saw blade diameter: 550 mm Speed: 3580 rpm Saw blade bore: 32 mm Control: NC Total power requirement: 3 kW Machine weight approx.: 250 kg Space requirements approx.: 980 x 1130 x 1430 mm The Gerd Wolff AC 550 is an automatic aluminium cutting machine, manufactured by a renowned producer in Turkey exclusively for our sales brand "GERD WOLLF Maschinenfabrik." CUTTING CAPACITY: Cutting range at 90° round: 155 mm Cutting range at 90° square: 155 x 155 mm Cutting range at 90° rectangular: 260 x 200 mm Cutting range at 45° round: 130 mm Cutting range at 45° square: 130 x 130 mm Cutting range at 45° rectangular: 180 x 200 mm Standard equipment: - Indexing points for 15° – 22.5° – 30° – 45° – 67.5° - Locking lever for securing at intermediate angles - Adjustable cutting speed for various profile types - Saw guard with safety switch - Belt-driven saw - Two-hand safety operation - Easy-to-change saw blade - 2 x pneumatic vertical cylinders with clamps - 1 x air blow gun Ihodeuddluepfx Af Tot Optional equipment: - Hydrocheck – Hydraulic feed rate adjustment for aluminium profiles - Cooling system for aluminium cutting - Auxiliary conveyor with rulers

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, dolžina rezanja (maks.): 5.750 mm, največja višina reza: 120 mm, največja širina rezanja: 2.600 mm, glavni premer žaginega lista: 460 mm, moč: 27 kW (36,71 KM), Machine type: fh6 580 HT260 ERB-L / MCS-Evolution / Win 10 Cutting length: 5,750 mm Cutting width: 2,600 mm Year of manufacture: 2007 Max. saw blade projection: 135 mm Max. saw blade diameter: 460 mm Main saw motor: 27 kW Scoring unit Max. scoring saw blade diameter: 200 mm Max. package height: 120 mm Min. package height: 3 mm Saw feed forward: 6 up to 150 m/min Saw feed backward: up to 150 m/min Infeed: up to 80 m/min (Europe: forward 25 m/min according to EN 1870-13) Number of clamps: 8 grip push clamps Clamp opening: 125 mm Lifting and lowering device for clamps Strip aligners before and after the pressure beam Air cushion table: 1 unit (2100 x 700 mm) Rotary table: 1 unit (5800 x 2200 mm), 90° rotatable Machine table: Heavy-duty steel "Closed Frame Construction" Finely machined steel table surface Table lips Automatic cutting length feature Lifting table, max. panel width: 2,600 mm Feed roller conveyor: 7,100 x 2,600 mm Forklift cutouts: 2 units Frequency inverter for feed roller conveyor Positioning stop: 2 units Push-off carriage Pushers: 3 units Package aligners for longitudinal edges: 3 units Counter holders: 3 units Roller table Angle stop at the roller table This machine is in very good condition and operates perfectly. It is overhauled, inspected, and tested at our facility. Ihedpfxovx Ru De Af Tst Subject to errors and changes in technical data and information! (Displayed photos are exemplary images)

Stanje: rabljeno, Leto izdelave: 2019, Funkcionalnost: nepreverjeno, Dražba: Zaprtje tovarne Roschmann, Gersthofen (Augsburg) Ponudbe so odprte – prodaja najvišjemu ponudniku. Lot 2910010: Ihodpfx Afex N Nigj Tet Lot sestavlja 1 rabljena enostavna potezna žaga z transportnim trakom v dobrem stanju. Kaže manjše sledi uporabe in je primerna za precizna rezalna dela s pnevmatskim vpenjanjem in avtomatsko podajalno podporo. Potezna žaga: Elumatec TS161/21, letnik 2019. Moč motorja: 1100 W, 4100 obr/min. Podajalni sistem: Ruchser RU-LAP3 podajalna enota, 1,5 kW, nosilnost 50 kg/m. Elektrika: 400 V (žaga), 230 V (RU), 50/60 Hz, 3,0 A + 4,5 A. Pneumatika: 7 bar zračnega pritiska, pnevmatsko vpenjanje. Oprema: integrirana upravljalna plošča, transportni okvir, dolžinski omejevalnik.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 460 mm, maks. debelina aluminijaste pločevine: 100 mm, skupna dolžina: 6.515 mm, skupna širina: 7.114 mm, skupna višina: 2.269 mm, vrsta vhodnega toka: Klimatska naprava, skupna masa: 7.000 kg, dolžina odseka (min.): 45 mm, dolžina odseka (maks.): 3.100 mm, delovna višina: 970 mm, vhodna napetost: 400 V, leto zadnje generalne obnove: 2025, pogonska enota žage: 27.000 W, obratovalni tlak: 6 letvica, vhodni tok: 66 A, maks. debelina medeninaste pločevine: 100 mm, Oprema: CE označba, dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Schelling fm6 330 Precision Panel Saw for Aluminum, Non-Ferrous Metals, as well as Plastics and Composite Materials Year of manufacture: 2011 Operator Software: Schelling MCS Evolution Operating System: Windows Control System: Siemens Maximum cutting length: 3,333 mm Maximum cutting width: 3,300 mm Maximum cutting height: 100 mm Maximum saw blade projection: 135 mm Maximum saw blade diameter: 460 mm Saw blade speed: 3,500 rpm Main saw motor: 27 kW Saw feed forward: 0.1 up to 80 m/min Saw feed backward: up to 80 m/min Return feed up to 30 m/min Forward feed 25 m/min (Europe: according to EN 1870-13) Number of material clamps: 8 units Maximum clamp opening: 133 mm Strip aligners before and after the pressure beam Automatic cutting length adjustment Grooving device Synchronous sawing and scoring Ihedpfxjx Hynbj Af Tjt Central cleaning system for saw Minimal lubrication system for saw blade with 2 nozzles Air flotation tables: 2 units, 2,100 x 700 mm Air flotation table no. 3 available as an option This machine is in very good condition and fully functional. It has been factory-refurbished, inspected and tested in-house. Subject to errors and technical modifications!

Leto izdelave: 2008, Stanje: rabljeno, Funkcionalnost: nepreverjeno, Aukcija: Zaprtje tovarne Roschmann, Gersthofen (Augsburg) Oddajte ponudbo zdaj – prodaja najboljšemu ponudniku. Lot 2910009: Popoln industrijski sistem za dvojnosečno žaganje za natančno rezanje aluminijastih ali PVC profilov z integriranim odsesavanjem prahu. Ta robustna in zanesljiva naprava je posebej primerna za uporabo v proizvodnji oken, fasad ali profilov, kjer sta natančno rezanje pod kotom in čist postopek nujna. Tehnični podatki: Dvojnosečna žaga - Proizvajalec: Elumatec - Model: DG 244/10 - Napajanje: 3~PEN / 400 V / 50 Hz - Moč motorja: 3,5 kW - Potreba po stisnjenem zraku: 7 bar - Hitrost: 2.800 min⁻¹ Ijdpfxox N Niae Af Tsht - Leto izdelave: 2008 Enota za odsesavanje prahu - Proizvajalec: Schuko (H. Schulte-Sudhoff GmbH & Co. KG) - Model: DG 244 - Pretok zraka: 1.870 m³/h - Moč motorja: 2,2 kW - Sesalni tlak: 1.050 Pa - Napajanje: 230/400 V, 50 Hz

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Automatically Swiveling Panel Saw Machine type: Panhans S45 Speed 420-320, Visioline Cutting length: 4,200 mm Cutting width: 3,200 mm Year of manufacture: 2011 Maximum saw blade projection (0°): 72 mm Maximum saw blade diameter: 350 mm Main saw motor: 14 kW Scoring unit Maximum scoring blade diameter: 180 mm Scoring unit, manually adjustable Maximum stack height (0°): 60 mm Saw feed forward: up to 100 m/min Saw feed backward: up to 100 m/min Infeed: up to 120 m/min (Europe: forward 25 m/min according to EN 1870-13) Number of clamps: 6 grip push clamps Clamping force adjustable steplessly at the control panel Number of stops: 2 Clamp opening: 82 mm Strip aligner in front of the pressure beam Air cushion tables: 3 units, 1800 x 600 mm Automatic angle cutting device WSA Motorized, stepless cutting height adjustment for main saw Cutting length automation Grooving and rebate unit Window cutout and insertion grooves Formatting unit This machine is in very good condition and fully functional. It is refurbished, inspected, and tested in our facility. Errors and changes in technical data and information reserved! Ihedpfx Ajk T Aw Sof Tst (Pictures shown are for illustration purposes only)

Stanje: rabljeno, Leto izdelave: 2002, Funkcionalnost: nepreverjeno, Aukcija: Zaprtje tovarne Roschmann, Gersthofen (Augsburg) Ihedpfjx N Nglox Af Tjt Ponudbe so odprte – prodaja najboljšemu ponudniku. Lot 2910001: sestavljen iz 1 rabljene CNC dvojne kotne žage v dobrem stanju. Kaže sledi redne industrijske uporabe. Značilnosti: Številka izdelka: 335 DGA2020, Serija: MEBAeco. Avtomatska dvojna kotna žaga s CNC krmiljenjem, kot reza od 30° do 135°. Obdelovana materiala: okrogli in pravokotni profili. Največja rezna zmogljivost: Ø 510 mm, 500×335 mm (ploščato). Hitrost reza: 15–150 m/min, servo podajanje, dolžina ostanka: 80 mm. Pogon žage: 3,0 kW, mehanska napetost lista. Dimenzije lista: 4400×34×1,1 mm. Višina delovne površine: 750 mm. Mere stroja: 4350×2300×1900 mm, teža: 2550 kg. Krmilna plošča: SIMATIC OP27. Elektrika: 400 V, 50 Hz, 25 A, krmilna napetost: 24 V. Zaščitna stopnja: IP54. Proizvajalec: MEBA Maschinenbau GmbH, leto izdelave: 2002, serijska številka: 6726.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, Automatique scie à panneaux à pivotement Type de machine : Panhans s45 420 Longueur de coupe : 4 200 mm Largeur de coupe : 3 200 mm Année de fabrication : 2005 Dépass. max. de lame de scie (0°) : 70 mm Diamètre max. de la lame : 350 mm Hauteur max. de paquet (0°) : 60 mm Hauteur max. de paquet (45°) : 38 mm Moteur principal de la scie : 7,5 kW Unité inciseur Avance de sciage avant : jusqu'à 60 m/min Avance de sciage arrière : jusqu'à 60 m/min Ihodpsit N S Nsfx Af Tst Avance d'introduction : jusqu'à 60 m/min (Europe : avant 25 m/min selon EN 1870-13) Nb de pinces : 7 pcs pinces grip push Nb de butées : 1 pc Tables à coussins d'air : 3 pcs 1800 x 600 mm Dispositif de coupe d'angle (WSM) Cette machine est en très bon état et parfaitement fonctionnelle. Elle est révisée, contrôlée et testée dans nos locaux. Sous réserve d’erreurs et de modifications des données techniques et des informations !