Varjenje Nabor nakup rabljenega (2.836)

Leto izdelave: 2022, stanje: kot nova (razstavni stroj), Welding turntable Protec KT 1200 kg Motorized, infinitely variable tilt and speed control Motor 0.75 kW with remote control Foot switch Table diameter 1200 mm Height 1000 mm Rodpfecrmyfox Agtjt Length 1400 mm Width 1500 mm Speed range from 0.05 to 0.5 rpm

Leto izdelave: 2021, stanje: pripravljen za uporabo (rabljen), V ponudbi je laserska prečna varilna linija. Vlakenski laser 1500W, vodno hlajen, vključen hladilni agregat, vodilo za paletni viličar, dovod zaščitnega plina, naprava za stiskanje zvarnega šiva, daljinski dostop RMACC01 SECOMEA, največja širina traku: 110mm, material traku: Jeklo: 0,25mm-3,0mm, ogljikovo jeklo: 0,25mm-2,5mm, aluminij: 0,25mm-2,5mm, baker: 0,20mm-1,2mm, dimenzije Š/V/D: 650mm/2054mm/1050mm, teža: pribl. 650kg. Ogled možen po dogovoru. Rsdpsyugl Uofx Agtet

Stanje: rabljeno, Inverter welding machine for manual metal arc welding TECHNOLIT type PROFImat 170 Plus MMA welding machine, inverter welder, manual electrode inverter welder Rjdsi E Iz Iepfx Agtot New – unused Serial no.: TB1703500316 Article no.: 440030 Year of manufacture: 2022 TIG (DC) Performance: 170 Amps, 45% duty cycle 150 Amps, 60% duty cycle 135 Amps, 100% duty cycle MMA Performance: 170 Amps, 35% duty cycle 145 Amps, 60% duty cycle 125 Amps, 100% duty cycle Adjustable range: 5–170 Amps, stepless Mains connection: 230 Volt, 50 Hz - Hot-start function (optimizes ignition behavior, simplifies starting with hard-to-strike electrodes) - Anti-stick function (optimizes electrode handling and prevents possible sticking of the electrode) - Arc-force function (optimizes arc stability and improves penetration) - Lift-arc arc ignition - Suitable for stick electrode welding, for all electrode types up to Ø 4 mm - Ground cable with plug connection - Electrode holder with 3-meter cable and plug connection - Equipped with 230 Volt Schuko plug - S-mark for welding in environments with increased electrical hazard - Overvoltage protection Dimensions (unit without cables) L x W x H: 310 x 155 x 265 mm Weight (without cables): 7 kg NEW – unused from warehouse stock

Stanje: rabljeno, Inverter welding unit for manual metal arc welding IMS - GYS type PROGYS FLEX 280A CEL MMA welding machine, inverter welding unit, stick electrode inverter Serial No. IEC 60974 Year of manufacture: 2020 Performance with mains supply 400 V (40% duty cycle): 280 amps Performance with mains supply 400 V (60% duty cycle): 200 amps Performance with mains supply 400 V (100% duty cycle): 170 amps Performance with mains supply 230 V (40% duty cycle): 200 amps Performance with mains supply 230 V (60% duty cycle): 180 amps Performance with mains supply 230 V (100% duty cycle): 150 amps Current range: 5-280 amps, stepless adjustment Power connection: 230 / 400 volts, 50 Hz - Operating voltage from 110 to 480 volts AC - Fully automatic adaptation to the supply voltage - Equipped with 16A CEE plug for 400V mains supply - Hot-Start function (optimized ignition for easier arc striking, especially with hard-to-strike electrodes) - Anti-Stick function (prevents electrode sticking and improves electrode handling) Redpovg Rh Tsfx Agtet - Arc-Force function (optimizes arc stability and penetration) - Digital display - Socket for remote control connection - Ground cable with plug connection - Electrode holder with 3-meter cable and plug connection - Suitable for all types of stick electrodes up to Ø 5 mm - TIG-DC welding (TIG torch not included) - The unit may be connected to a flexible three-phase supply between 110 V and 480 V, or to a fixed three-phase 400V supply (50 - 60 Hz) plus earth conductor. This device may only be connected to a 4-wire, 3-phase power system with grounded neutral. Dimensions (unit without cables) L x W x H: 470 x 270 x 430 mm Weight (without cables): 23 kg New, unused

Stanje: rabljeno, Capacitor Discharge Welding Machine MEGATRONIC Type CD-1200 / QB 2 / 6P Capacitor discharge welding technology with high currents and minimal welding times. Spot and projection welding machine The CD (Capacitor Discharge) welding technology operates on the principle of transformed capacitor discharge. Year of manufacture: 1993 Very high welding performance with relatively low mains connection requirements. - Extremely short welding times, welding process features rapid current rise and high welding current within milliseconds - No distortion or annealing - No significant heating of peripheral zones, ideal for heat-sensitive components - Suitable for welding high-carbon steels - Suitable for welding surface-coated workpieces Rated energy: 12,288 Ws Uc: 3,200 Volt Capacitance: 2,400 µF Open-circuit voltage: 10 Volt Electrode force: 200–2,000 daN, continuously adjustable Working air pressure: 6 bar Main fuse: min. 35 Amp. Operating current: 32 Amp. Connection: 400 Volt, 50 Hz Redeguvtdspfx Agtet - Programmable control megapuls CD-12000 - Parallel electrode guidance - Electric two-hand control console (adjacent) - Control cabinet with fixed-mounted control system Weight: 3,000 kg Good condition

Stanje: rabljeno, Capacitor Discharge Welding Machine MEGATRONIC Type CD-1200 / QB 2 / 6P Capacitor discharge welding with high currents and minimal welding times. Projection and spot welding machine The CD (Capacitor-Discharge) welding technology operates according to the principle of transformed capacitor discharge. Machine No. 352 / 92 Year of manufacture: 1993 Very high welding performance with relatively low mains connection. - Very short welding times, welding process with rapid current rise and high welding current within milliseconds - No distortion or annealing - Negligible heating of the peripheral zones, ideal for temperature-sensitive components - Welding of high carbon steels - Welding of surface-coated workpieces Rated energy: 12,288 Ws Uc: 3,200 Volt Capacity: 2,400 µF Open-circuit voltage: 10 Volt Electrode force: 200–2,000 daN, infinitely adjustable Operating air pressure: 6 bar Minimum mains fuse: 35 A Operating current: 32 A Mains connection: 400 V, 50 Hz - Programmable control megapuls CD-12000 Rodpfx Ajguvtaegtot - Parallel electrode guidance - Electric two-hand control panel, freestanding - Control cabinet with control unit fixed to the machine Weight: 3,000 kg Good condition

Stanje: rabljeno, E-welding unit, stick electrode welding machine ESAB type LTG 250 Machine no. 736-820-387 Year of manufacture: 1997 Rsdpfx Agjd N E Rvjtst Output: 250 amps at 35% duty cycle 190 amps at 60% duty cycle 150 amps at 100% duty cycle Output adjustment: stepless - Electrode holder with 6 metre connection cable - Direct current - Fan cooling - Possible TIG welding capability, without torch package Mains connection: 380 volt, 50 Hz, 32 amp plug Dimensions (L x W x H): 1200 x 750 x 1050 mm Weight: 180 kg Good condition The machine was originally also designed for TIG welding. The TIG torch package is not included, and this function has not been tested. The water cooling was intended for the TIG torch package. Therefore, the unit is sold only as a stick electrode welder. A welding test with stick electrodes yielded very good results.

Stanje: kot nova (razstavni stroj), 600 kg load capacity welding positioner, height-adjustable, with a table diameter of 1,000 mm. Height adjustable from a minimum of 0.65 m to a maximum of 1.53 m. Rotation speed from 0.01 to 1.1 rpm. Tilting angle up to 135°. Manual and foot remote control with speed display. Very robust design. Rsdpfx Agod D D Hljtst

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, 3000 kg welding positioner, hydraulically height-adjustable Speed: 0.05 to 0.6 rpm Table diameter: 1200 mm Tilt angle: 0 to 120° Rjdpfx Ajdt Rhgsgtet Height adjustment: 960 mm ~ 1910 mm

Stanje: novo, Leto izdelave: 2024, Welding turntable with 500 kg load capacity with hand and foot remote control diameter: 690 mm bore: 100 mm height: 580 mm infinitely variable speed: 0.15 – 2.0 rpm Rsdpogfv Skjfx Agtst motor: AC 380 V

Stanje: novo, Leto izdelave: 2024, nosilnost: 3.000 kg, Oprema: nožno daljinsko upravljanje, 3,000 kg load capacity welding positioner, extremely robust design Continuously variable speed control from 0.05 to 0.7 rpm Turntable diameter 1,400 mm Tilting angle up to 120° Height (horizontal) 1,300 mm, height (tilted, to center) 1,050 mm Dimensions: length 2.0 m x width 1.4 m Handheld remote control with digital display Rjdpfx Asv En U Iogtjt and dual foot pedal control

Stanje: zelo dobro (rabljeno), Welding Rotating Table with 2-Ton Load Capacity Equipped with hand and foot remote controls Continuously adjustable speed and tilt angle Good condition, machine is robust and virtually indestructible Height (tilted to center): 1.05 meters Height (horizontal): 1.3 meters Redsgytclopfx Agtet Table diameter: 1.3 meters Length: 2.2 meters Width: 1.4 meters Speed range: from 0.01 rpm up to approx. 1.0 rpm

Stanje: novo, Leto izdelave: 2024, Welding Positioner Protec KT 10 000 HV Complete set including hand and dual foot remote control Digital speed display Hydraulic height adjustment Tilting range from 0 to 130° Dimensions: Minimum tilted height: 1080 mm Maximum tilted height: 2200 mm Minimum horizontal height: 1400 mm Clamping plate diameter: 2000 mm Length: 3250 mm Width: 1780 mm Speed range: 0.05 to approx. 0.6 rpm. Redpsk S D N Eofx Agtot

Stanje: dober (rabljeno), Leto izdelave: 2024, Welding turntable KT 300 Load capacity horizontal: 300 kg, tilted: 150 kg Power supply: 220V, 50 Hz Table diameter: 450 mm Rsdpfx Ajbvk I Ejgtet Height: 500 mm Tilting range: stepless via crank gear motor 0 – 90° Speed: 0.3 – 2.5 rpm Incl. foot remote control Surcharge: Quick-release chuck Diameter: 300 mm, €450

Stanje: novo, Welding Positioner KT 500, with 100 mm through-hole Load capacity horizontal: 600 kg, tilted: 300 kg Power supply: AC 380V, 50 Hz Rotary drive motor: AC 400W Table diameter: 700 mm Height: 700 mm, Width: 800 mm, Length: 800 mm Weight: 155 kg Tilting range: stepless, electric, 0 – 90° Rotation speed: 0.3 – 2.5 rpm Welding current transmission: max. 500 A Includes hand-held and foot remote controls Surcharge: Rodpfx Ascat H Njgtet Quick-change chuck Diameter: 400 mm, €550 CE marking/approval

Stanje: kot nova (razstavni stroj), 3,000 kg welding positioner, hydraulically height-adjustable Speed: 0.05 to 0.6 rpm Table diameter: 1,200 mm Tilting angle: 0 to 120° Total height adjustment: approx. 700 mm Height adjustment with vertical table, up to center: 960 mm ~ 1,910 mm Dimensions with horizontal table: 1,200 mm to 1,900 mm Rodpfx Ajdvn E Ujgtjt

Stanje: zelo dobro (rabljeno), Welding positioner with 10-ton load capacity Condition: impeccable, without defects; extremely robust and indestructible; simple engineering ensures easy maintenance. Infinitely variable speed control from 0.01 to 1.0 rpm Rodpfx Agsh Dm Stjtot with speed display Equipped with dual foot pedal remote control and additional hand remote control Clamping plate diameter: 1800 mm Tilted height to plate center: 1650 mm Horizontal height: 1850 mm Length: 3300 mm Width: 1700 mm Upon request, the legs can be shortened.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, 1200 kg load capacity welding positioner, CE-certified Very robust construction Infinitely variable speed adjustment from 0.05 to 0.7 rpm Turntable diameter: 1200 mm Tilting angle up to 120° Rjdpslamr Eefx Agtot Height in horizontal position: 1,050 mm; tilted to center: up to 880 mm Hand and foot remote control Dimensions: Length 1.35 m x Width 1.2 m

Stanje: dober (rabljeno), Welding Positioner KT 300 Horizontal Load Capacity: 300 kg Tilted Load Capacity: 150 kg Power Supply: 220V, 50 Hz Table Diameter: 450 mm Height: 500 mm Tilt Range: Infinitely adjustable via worm gear motor, 0 – 90° Speed: 0.3 – 2.5 rpm Includes foot remote control Surcharge: Quick-Change Chuck Diameter: 300 mm, €450.- Rodpfx Asb Dymhjgtot

Leto izdelave: 2015, stanje: rabljeno, Container turning device, welding table, welding positioner, roller stand Load capacity: 1000 kg With foot remote control Infinitely variable speed control: 80 to 1600 mm/min Diameter: 20 mm to 700 mm Redpfjc Ny H Asx Agtet

Leto izdelave: 2022, stanje: novo, Welding positioner KT 300 Horizontal load capacity: 300 kg, tilted: 150 kg Power supply: 220V, 50 Hz Table diameter: 500 mm Hollow shaft diameter: 140 mm Table height: 600 mm, tilted to center: 450 mm Length: 650 mm, Width: 650 mm Infinitely variable tilt range via worm gear motor: 0 – 90° Rotational speed: 0.3 – 2.5 rpm Rsdpfx Agsg Sz Ucjtst Including foot remote control Surcharge: Quick-change chuck Diameter: 400 mm, €550

Stanje: kot nova (razstavni stroj), Leto izdelave: 2020, Container rotating device, rotating device Rodpeigng Nsfx Agtot Length and axle spacing adjustable

Stanje: novo, Leto izdelave: 2024, nosilnost: 10.000 kg, Welding positioner, tank turning device with 10,000 kg load capacity Dual synchronized drive Equipped with hand and foot remote control, digital speed display Suitable for workpiece diameters from 160 mm to 4000 mm Drive roller diameter: 300 mm Dimensions: Length: 1900 mm x Width: 470 mm x Height: 390 mm Rjdsk Admgspfx Agtjt Continuously variable speed: 100 - 1000 mm/min Motor: AC 380 V

Stanje: novo, Leto izdelave: 2025, Self-centering complete set, dual drive, synchronous with handheld remote control with digital display and foot remote control Diameter range from 300 mm to 3500 mm Rsdpek Adv Ejfx Agtot Drive roller diameter: 300 mm Dimensions: Length: 1900 mm x Width: 470 mm x Height: 390 mm Continuously adjustable speed: 200 - 1200 mm/min Motor: AC 380 V

Stanje: dober (rabljeno), Welding positioner Protec KT 2000 A Load capacity: 2000 kg Continuously adjustable Tilt angle: 0 to 120° With hand and foot remote control Height horizontal: 1200 mm Height tilted to center: 1000 mm Special version with welding current transmission: 800 amperes Rsdjpdqfrepfx Agtst Length: 1700 mm, Width: 1200 mm