Varjenje Ploščo nakup rabljenega (3.789)

Stanje: dober (rabljeno), Length: approx. 2430 mm Width: approx. 1520 mm Height: approx. 540 mm Hnedpjd Nmdfefx Amcek

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, skupna masa: 40 kg, dolžina plošče: 220 mm, širina plošče: 180 mm, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! Oddaja ponudbe zavezuje k pravočasnemu prevzemu v enem od terminov: med 11.05.2026 in 13.05.2026 ali med 18.05.2026 in 21.05.2026! TEHNIČNE PODROBNOSTI Dimenzije magneta: 220 x 180 mm PODROBNOSTI STROJA Hnodpfx Ameyn Hmrocsk Dimenzije & teža Dimenzije (D x Š x V): 270 x 270 x 340 mm Teža: 40 kg Zunanja referenca: Pieper - Lot 31

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3364, dolžina izdelka (min.): 100 mm, največja širina izdelka: 350 mm, širina izdelka (min.): 120 mm, največja dolžina izdelka: 250 mm, proizvodna zmogljivost: 10.000 enota/h, TEHNIČNI PODATKI Minimalen format: 100 mm x 120 mm Hsdjyzpvwjpfx Amcenk Maksimalen format: 250 mm x 350 mm Maksimalna debelina pošiljke: 30 mm Debelina folije: 20 do 100 µm Največja hitrost: 10.000 / h PODATKI O STROJU Napetost: 380 V, 3F+N+PE Frekvenca: 50–60 Hz Poraba toka: 21 A Tlak zraka: 6 atm OPREMA 1 poštni podajnik tipa shuttle 3 rotacijski podajalci Sekcija folijskega pakiranja Transportni trak

Leto izdelave: 2015, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, The pneumatic butt welding machine type Sv‑63P features a robust vertical structure comprising vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable slides connected to a horizontal cylinder for compressing the workpiece. The movements of the slides are mechanically limited in both directions—for clamping and opening—and the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping at the set jaw distance is controlled via foot pedals. An additional control cabinet with switches and buttons allows for individual or simultaneous clamping and supports both manual and automatic welding. Once welding is complete, the clamping jaws open, and the slides return to their initial position. Welding parameters are set via a controller mounted on the side of the machine. Welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws by laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the machine cover, a compressed air maintenance unit with a pressure regulator is fitted for adjusting the clamping force. The machine’s main power switch is located on the controller used for setting the welding parameters. Hnodpfx Amsyqr Sxocok

Stanje: novo, Leto izdelave: 2024, Welding turntable with 1,000 kg load capacity with hand and foot remote control Diameter: 1,000 mm Bore: 100 mm Height: 580 mm Stepless speed adjustment: 0 – 0.6 rpm Hedpfx Amsgfqkwscenk AC motor 380 V

Stanje: novo, Leto izdelave: 2014, Zavihni dvigalo z iztegljivo roko ZYBA-MAT Proizvajalec: Strödter Tip: ZP 60 / SAZ 60 D1 Leto izdelave: 2014 Novo in neuporabljeno Nosilnost največ: 25 kg Delovni radij približno: 3.000 mm Maks. dvig: 800 mm Maks. hitrost dviga: pribl. 800 mm/sek. Hnedpjgu Dkyofx Amcok Napajanje: pnevmatsko Način pritrditve: Zavihna roka s samostoječim stebrom Lastna teža naprave (z nosilnim pripomočkom): 287 kg Delovni tlak: 6 bar Za največjo nosilnost zahtevana kakovost zraka: čist, suh in filtriran (5μm) Poraba zraka največ: pribl. 17 Nl/dvojni dvig ZYBA-MAT na zavihni roki Pnevmatski uravnotežen nadzor z avtomatskim tehtanjem.

Leto izdelave: 2010, stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, število prejšnjih lastnikov: 2, dolžina letve: 1.000 mm, številka stroja/vozila: BLP80, Visokofrekvenčni varilni stroj v fazi prenove Hnsdpfx Aey Atyvomcjk 80 cm roka Moč 10 kW Enojna elektroda 20x1000 mm ali nastavljiva dvojna 10x1000 mm Velika delovna miza Po zaključku prenove bo varilni stroj skladen z veljavnimi CE predpisi 12 mesecev garancije

Stanje: novo, Electric Heated Platen Press SCM Model: gs 6/90 30-13 Offer Type: New machine Technical Data: Dimensions of heating platens: 3000 x 1300 mm Number of platens: 2 pcs Maximum temperature of platens: 120°C Recommended operating temperature of platens: 90°C Number of press cylinders: 6 pcs Hydraulic pump motor power: 3.0 kW, 400 V, 50 Hz Pressing force: 90 t (900 kN) Diameter of press cylinders: 70 mm Number of levels: 1 Daylight opening (approx.): 400 mm Connected load: 26.0 kW, 400 V, 50 Hz Heating Platens: Electrically heated aluminium sandwich platens from ELKOM, Germany. Continuously adjustable up to max. 120°C, up to 150°C on request. Thermal insulation towards the press frame. Platens are mounted with special brackets to allow for necessary thermal expansion. Hydraulics: Compact hydraulic pump, integrated in the press frame, from HAWE Germany. 2-stage design for closing and pressure build-up phase. Hydraulic cylinders made of high-quality, tempered and ground steel with large diameter. Press Frame: The press frame is a heavy-duty, torsion-resistant, stress-relieved welded steel construction. Presses of the gs series can be loaded from all four sides. Press tables are constructed from welded HEA profiles. Precision machining of the assembly components is done on state-of-the-art CNC machines. Uniform and precise movement of the press table is ensured by rack-and-pinion and self-lubricating slide guides on 2 corners of the frame. Control: Side-mounted control panel with SIEMENS 7'' colour touchscreen Proprietary SCM software enables simple, intuitive operation. The following parameters can be programmed, called up, and changed: Hjdpfx Ajfh Tmmsmcjnk - Automatic calculation of maximum allowable hydraulic press pressure based on workpiece size. - Storage of up to 100 programs (temperature, specific pressure, pressing time, platen size) possible. - Direct hydraulic pressure setting. - Internet connectivity for remote maintenance service. - Electronic control of pressing time - Electronic monitoring of platen temperature - Automatic pressure recovery - Complete diagnostics and fault display with messages on the screen OPTIONAL EXTRAS: - Electronic flatness control (misfeeding monitoring) - MYLAR film for protection and easy cleaning of the electric platens - Surcharge for 120 t press force - ELKOM platens with gold anodising finish

Stanje: rabljeno, Leto izdelave: 1985, Funkcionalnost: omejena funkcionalnost, Polnilni in pakirni stroj Proizvajalec: Volpak, model S130D Volpak S-130-D – stroj za tristranske varjene vrečke za prah in granulate, Duplexno delovanje Vključno z dvema mešalnima lijakoma in polžnim dovajanjem Kodirnik za vroče folije Velikost vrečk od 50 x 50 mm do 130 x 200 mm Zmogljivost do 80 vrečk/min (duplex način) Zelo primeren za živila Tehnične specifikacije na slikah Vključno z veliko rezervnih in obrabnih delov Hnedpfx Amsy Ah Rpjcsk Vključno z originalno dokumentacijo (nemško + angleško)

Stanje: pripravljen za uporabo (rabljen), Stroji za uporovno varjenje, uporovni varilnik, Meritus RAS 150 VSH, rabljeni stroj Proizvajalec: Meritus Hnsdpfjrdf Acjx Amcjk Tip: RAS150VSH, MPW-RW 811-1410 Skupne mere: 900 x 1370 x 2450 mm Električni podatki: 415 V; 150 kVA; 50 Hz Opremljen s svetlobno zaveso Orodje s hlajenjem z vodo

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, 2 units of static spreader plate separators for the extraction of filler sand 1 x Type: CC1180 ST and 1 x Type: CC1180R Feed size: 4-5 mm Final product: up to 150 µm Hsdpfx Aeqi Hcgjmcjnk Electric drives: 7.5 and 11 kW Also included: a matching cyclone - Model: Hurriclone from PM-Technologies

Leto izdelave: 2002, stanje: rabljeno, Technical Details: Control: Soft-PLC Hodou Nwf Iepfx Amcjnk Burner Heads: 1 piece Center Distance: approx. 4000 mm Rotary Table: Ø 890 mm Rotary Table: rotatable 360° Rotary Table: tiltable 130° Electrical Configuration - Voltage/Frequency: 3x400 V / 50 Hz Total Power Requirement: approx. 22 kVA Machine Weight: approx. 5.0 t Dimensions L x W x H: 5.7 x 2.4 x 2.8 m Control Cabinet Dimensions: 1600 x 640 x 1500 mm PTA Welding Plasma Coating System with 8 Axes Application: Coating of sealing plates, seat rings, cones, cone spindles, and other wear parts Powder Dosing System: - Controlled by process control system / powder quantity adjustment - Powder quantity approx. 10 kg, grain size 25µ - 500µ - Dosing quantity regulation Power Source: - MOSFET regulation; Pilot mode max. 200A and Transfer 300A - Digital display - Air-cooled - Control 0-10V / 0-20mA Plasma Torch: - Water-cooled - Continuous duty max. power: Pilot 100A and Transfer 300A High-Frequency Ignition Unit: - HF generator for arc ignition Gas Control System: - Process-controlled for fully automatic operation - Plasma gas system with electrically adjustable flowmeter - Gas = Argon 99.99 pure gas - Plasma gas flow rate: 0.05 - 5 l/min; Powder gas system: 0.50 - 20 l/min; Shielding gas system: 1.50 - 30 l/min Support Bracket with Rotating Center Water Cooling Unit Operating Panel Enclosure

Leto izdelave: 1998, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Edge milling machine, manufacturer: IMAC Hodpfx Aey A Hnmomconk Year of manufacture: 1998 Model: CB 18 Series: B20

Stanje: novo, Condition: New Delivery time: approx. 2 weeks from order confirmation Country of origin: Italy Price: €17,940 Leasing rate: €344.45 Hjdpfxsyv Iqvs Amcjnk Grinding wheel dimensions: Dm. 200x78x78 mm Speed: 2,800 rpm Distance grinding wheel to table (without magnetic chuck): 300 mm Magnetic chuck: 300x150x55 mm Grinding area: 350x150 mm Table: 500x160 mm Motor power: 3.6 kW Length: 1,020 mm Width: 820 mm Height: 2,170 mm Weight: 440 kg This surface grinding machine with fixed table is based on the R.V. 500 model, but features an extended, quadruple-mounted column with an additional robust column support. Thanks to its rigidity and geometric stability, this surface grinder is ideal for machining precision components of considerable height, whether single pieces or serial production parts from toolmaking, molds, dies, gears, and more. The vertical spindle nuts and the alignment pins of the axes on this fixed-table grinder also ensure consistently optimal working conditions. Cast iron bed for lasting geometric stability. Cast iron column, protected by bellows and mounted in four adjustable precision bearings, generously sized for this type of fixed-table grinder. Three-phase motor with double-jacket air cooling prevents overheating during continuous operation and keeps the temperature of the motor shaft and bearings consistent. The hardened, ground, and dynamically balanced shaft, mounted in precision ball bearings, is generously sized for this grinder type with a fixed table and self-adjusting via spring-preloaded tension to absorb thermal expansion. The vertical spindle is mounted in opposing, adjustable ball bearings, ensuring free movement in the grinding area and preventing dust accumulation. Metal bellows offer optimal protection for the vertical spindle. Opposing bronze nuts compensate for long-term wear of the vertical spindle on this fixed-table grinder. Alignment pins align the grinder motor on the axis, ensuring parallel surfaces over the long term. The grinder handwheel is triple-supported and connected to the spindle via two helical gears. It features a graduated dial, supported by an axial bearing, enabling material removal of 0.01 - 0.02 - 0.03 mm per pass. Rapid traverse per handwheel revolution is 2 mm. A dial with lever provides programmable micrometric feed of 0.01 - 0.02 - 0.03 - 0.04 mm per impulse, simplifying operation by eliminating continuous step control. A slot allows optimal use of the grinding wheel’s working height and clamping of non-magnetic parts and accessories, such as magnetic chucks, self-centering chucks, and angle plates. Low-voltage controls, safety devices, indicator lights, and all necessary equipment ensure compliance with safety and regulatory standards for this class of fixed-table grinding machine. Handles, design, and dimensions of the fixed table grinder meet current ergonomic standards...

Leto izdelave: 1970, stanje: rabljeno, Spot welding machine Manufacturer: Dalex Hsdpfx Amek Tt Hfjcenk Model: SF 16 Continuous power: 16 kVA at 50% duty cycle

Stanje: rabljeno, Dalex-Werke Pms 10-2 380V Hodpfx Asg Rcpxemconk 50Hz Rated power at 50% duty cycle: 63 kVA Secondary short-circuit current: 45 kA Rated primary voltage: 380 V - 50 Hz Open-circuit voltage: 5.6 V Electrode force: 65–390 daN Machine weight: 341 kg

Stanje: novo, Leto izdelave: 2026, skupna masa: 500 kg, skupna dolžina: 28.650 mm, skupna širina: 16.500 mm, skupna višina: 25.230 mm, vhodna napetost: 230 V, trajanje garancije: 24 meseci, About this machine: You receive a 24-month warranty with this machine. Upon request, we can also offer you suitable ramp options, a photoelectric sensor for black detection, or the appropriate machine stretch film! About this model: Our ProfilineLP is a semi-automatic stretch wrapper, which guarantees absolutely consistent results with up to 32 storable programs, thus eliminating any “human factor.” It is as space-saving as a pallet wrapper with horseshoe turntable, and as robust as a closed system – the advantages of this machine are clear and to the point! The electromagnetic brake allows precise adjustment of film tension, and the settings for base wraps, upward wraps, top wraps, and downward wraps can be saved in each program. Within the programs, you can further adjust the speed of the film carriage and turntable, as well as store the number of top and bottom wraps and the film overlap at the pallet end individually for each program. This enables you to set up customized programs for each packing scheme, ensuring consistently perfect wrapping results. The programs can be password-protected so operators can only select from pre-set programs. With a weight of 500 kg, this model is designed for loads up to 1,200 kg. Our Profiline LP features a 1,650 mm turntable and can wrap pallets up to 2,500 mm high as standard. Automatic pallet detection via photoelectric sensor, as well as adjustable head and foot wraps, come as standard. This model is our recommendation if you have limited space and require a professional, robust pallet wrapper that is fully adaptable to your needs. Would you like a taller mast, pre-stretch film unit, or automatic film cutting? With this machine, almost anything is possible! We are happy to configure this machine as a new unit with any options tailored to your requirements. About us: Hnsdpey Drbnofx Amcsk Business is done between people – we are convinced of that! A supplier delivers the goods you order – a partner does more: they help you find the best solution, support you in achieving your goals, and are by your side when facing challenges. That is our philosophy. For over 40 years and in the 4th generation, we have been the partner for SMEs when it comes to 'stretching and sealing.' If you wish, we also provide expert advice on which pallet wrapper in our portfolio is the best solution for your requirements!

Stanje: novo, Leto izdelave: 2026, skupna masa: 500 kg, skupna dolžina: 28.650 mm, skupna širina: 16.500 mm, skupna višina: 25.230 mm, vhodna napetost: 230 V, trajanje garancije: 12 meseci, About this machine: You receive a 24-month warranty with this machine. Upon request, we can also offer you suitable ramp options, a photoelectric sensor for black detection, or the appropriate machine stretch film! About this model: Our ProfilineLP is a semi-automatic stretch wrapper, which guarantees absolutely consistent results with up to 32 storable programs, thus eliminating any “human factor.” It is as space-saving as a pallet wrapper with horseshoe turntable, and as robust as a closed system – the advantages of this machine are clear and to the point! The electromagnetic brake allows precise adjustment of film tension, and the settings for base wraps, upward wraps, top wraps, and downward wraps can be saved in each program. Within the programs, you can further adjust the speed of the film carriage and turntable, as well as store the number of top and bottom wraps and the film overlap at the pallet end individually for each program. This enables you to set up customized programs for each packing scheme, ensuring consistently perfect wrapping results. The programs can be password-protected so operators can only select from pre-set programs. With a weight of 500 kg, this model is designed for loads up to 1,200 kg. Our Profiline LP features a 1,650 mm turntable and can wrap pallets up to 2,500 mm high as standard. Automatic pallet detection via photoelectric sensor, as well as adjustable head and foot wraps, come as standard. This model is our recommendation if you have limited space and require a professional, robust pallet wrapper that is fully adaptable to your needs. Hnjdjy Drbhopfx Amcok Would you like a taller mast, pre-stretch film unit, or automatic film cutting? With this machine, almost anything is possible! We are happy to configure this machine as a new unit with any options tailored to your requirements. About us: Business is done between people – we are convinced of that! A supplier delivers the goods you order – a partner does more: they help you find the best solution, support you in achieving your goals, and are by your side when facing challenges. That is our philosophy. For over 40 years and in the 4th generation, we have been the partner for SMEs when it comes to 'stretching and sealing.' If you wish, we also provide expert advice on which pallet wrapper in our portfolio is the best solution for your requirements!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Oprema: Na voljo je tipska ploščica, Letnica izdelave 1994, modernizirana s strani proizvajalca strojev KUKA leta 2012. Linija ima enoto za struženje, stiskalnico za obod in enoto za dovajanje cevi za raztovarjanje zvarjenih komponent. To linijo lahko prilagodimo zahtevam kupca. Možna je tudi popolna obnovitev (retrofit). Hnsdpjx I Efbsfx Amcek

Stanje: rabljeno, Električna moč 8,0 kVA Doseg 80 - 480 mm Pritiskalna sila 17 - 235 daN Hnjdsxtqv Tepfx Amcok Razdalja med rokama 140 mm Nazivna moč 8,0 kVA Obratovalna napetost 380 V Skupna potrebna moč 17,8 kVA Teža stroja pribl. 77,5 kg Dimenzije pribl. 0,35 x 0,80 x 1,05 m - Tovarniška št.: 8419329-2

Leto izdelave: 2005, stanje: rabljeno, Sheet width: 3100 mm Sheet thickness: 12 mm Frame width: 3260 mm Back gauge (adjustable): 3 - 1250 mm Drive power: 37 kW Operating voltage: 400 V Machine weight: approx. 14 t Hnjdjd Il Anspfx Amcjk Space requirements: approx. 4.00 x 4.00 x 2.20 m CNC-controlled guillotine shear Transport dimensions: Machine: 4.00 x 2.90 x 2.20 m (H) Feed conveyor: 3.70 x 1.00 x 1.00 m (H)

Leto izdelave: 2023, stanje: novo, Three-phase powered positioner Table and arm rotation via hydraulic slewing drives Arm height adjustment with hydraulic actuator Function control located on the positioner housing Ideal for positioning components during: welding cleaning assembly Increases work efficiency by up to 40% Unlimited rotation in 2 axes plus vertical and horizontal movement allows any orientation of the clamped workpiece (including upside-down positioning). The 3-axis positioner significantly improves work ergonomics compared to traditional rotary-tilting positioners (optimal workpiece positioning, user-friendly operation). Advantages and Benefits: For the employer: - Increases productivity by up to 40% thanks to optimal positioning – resulting in a short device payback period - Increased production output without requiring additional shop floor space - Superior weld joint quality – always allows for flat (downhand) welding - Robust construction ensures long-lasting, trouble-free operation For the operator: Hnjdpogmiduefx Amcsk - Ergonomic working posture ensured - Minimized accident risks – no need to re-clamp the workpiece - No downtime from waiting for an overhead crane - Easy installation and operation Full automation of the welding process is possible by integrating Kawasaki welding robots. We also offer positioners complete with a robot and integrated control system. ADDITIONAL OPTIONS: - WIRED REMOTE CONTROL FOR POSITIONER OPERATION - WIRED FOOT PEDAL FOR TABLE ROTATION CONTROL - STEPLESS SPEED CONTROL FOR TABLE AND ARM ROTATION - CONTINUOUS TABLE ROTATION FUNCTION - CUSTOM ARM LENGTH AND DESIGN - CUSTOM TABLE SIZE AND SHAPE - ROTATIONAL MASS CAPACITY We can manufacture positioners according to individual customer requirements.

Stanje: novo, Leto izdelave: 2023, Three-phase powered positioner Table and arm rotation via hydraulic slewing drives Arm height adjustment with hydraulic actuator Hnsdpjhzuwcofx Amcok Function control located on the positioner housing Ideal for positioning components during: welding cleaning assembly Increases work efficiency by up to 40% Unlimited rotation in 2 axes plus vertical and horizontal movement allows any orientation of the clamped workpiece (including upside-down positioning). The 3-axis positioner significantly improves work ergonomics compared to traditional rotary-tilting positioners (optimal workpiece positioning, user-friendly operation). Advantages and Benefits: For the employer: - Increases productivity by up to 40% thanks to optimal positioning – resulting in a short device payback period - Increased production output without requiring additional shop floor space - Superior weld joint quality – always allows for flat (downhand) welding - Robust construction ensures long-lasting, trouble-free operation For the operator: - Ergonomic working posture ensured - Minimized accident risks – no need to re-clamp the workpiece - No downtime from waiting for an overhead crane - Easy installation and operation Full automation of the welding process is possible by integrating Kawasaki welding robots. We also offer positioners complete with a robot and integrated control system. ADDITIONAL OPTIONS: - WIRED REMOTE CONTROL FOR POSITIONER OPERATION - WIRED FOOT PEDAL FOR TABLE ROTATION CONTROL - STEPLESS SPEED CONTROL FOR TABLE AND ARM ROTATION - CONTINUOUS TABLE ROTATION FUNCTION - CUSTOM ARM LENGTH AND DESIGN - CUSTOM TABLE SIZE AND SHAPE - ROTATIONAL MASS CAPACITY We can manufacture positioners according to individual customer requirements.

Leto izdelave: 2023, stanje: novo, The SPR series is the most popular and preferred line of our manipulators among customers. By shifting the arm's rotation axis above the mounting plate plane, the weight of the carrier arm acts as a counterweight for the welded component. This technical solution provides a distinct advantage over the PX and BE series. It allows for flexible positioning of the welded part, including 'upside-down' orientations. STANDARD VERSION Positioner powered by three-phase current Arm rotation via hydraulic slewing drive Table rotation via electric slewing drive Arm height adjustment via hydraulic cylinders Function controls located on the positioner housing Hedponqzrpefx Amcjnk ADDITIONAL OPTIONS Wired control pendant Wireless control pendant Foot pedal on a cable for table rotation Variable-speed table rotation Rotating mass (positioner housing) Length and shape of the arm Customizable positioner configuration available Function controls via teach pendant

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 21_0346, NEW – UNUSED High-performance positioner for manual or robotic welding – lifting and rotating device. Special equipment for specific applications, designed and manufactured by FÖRSTER Welding Systems GmbH. Hjdjurlcrepfx Amcjnk Maximum workpiece diameter: 2500 mm Maximum workpiece weight: 20 tons Dimensions of the welding positioner: 7000 x 3000 x 3750 mm Weight (without counterweight): 20,000 kg Overall dimensions of the entire system: 8900 x 4800 x 3750 mm Total weight of the entire system: 40,000 kg Counterweight included in the scope of delivery. Complete documentation available. Technical support from the manufacturer is available upon request. The machine is located in central Poland.