Varjenje Manipulatorja nakup rabljenega (2.773)

Stanje: rabljeno, Capacitor Discharge Welding Machine MEGATRONIC Type CD-1200 / QB 2 / 6P Capacitor discharge welding with high currents and minimal welding times. Projection and spot welding machine The CD (Capacitor-Discharge) welding technology operates according to the principle of transformed capacitor discharge. Machine No. 352 / 92 Year of manufacture: 1993 Very high welding performance with relatively low mains connection. - Very short welding times, welding process with rapid current rise and high welding current within milliseconds - No distortion or annealing - Negligible heating of the peripheral zones, ideal for temperature-sensitive components - Welding of high carbon steels - Welding of surface-coated workpieces Rated energy: 12,288 Ws Uc: 3,200 Volt Capacity: 2,400 µF Fgedpfjguvtajx Apljb Open-circuit voltage: 10 Volt Electrode force: 200–2,000 daN, infinitely adjustable Operating air pressure: 6 bar Minimum mains fuse: 35 A Operating current: 32 A Mains connection: 400 V, 50 Hz - Programmable control megapuls CD-12000 - Parallel electrode guidance - Electric two-hand control panel, freestanding - Control cabinet with control unit fixed to the machine Weight: 3,000 kg Good condition

Stanje: rabljeno, E-welding unit, stick electrode welding machine ESAB type LTG 250 Machine no. 736-820-387 Year of manufacture: 1997 Output: 250 amps at 35% duty cycle 190 amps at 60% duty cycle 150 amps at 100% duty cycle Output adjustment: stepless - Electrode holder with 6 metre connection cable - Direct current - Fan cooling - Possible TIG welding capability, without torch package Mains connection: 380 volt, 50 Hz, 32 amp plug Dimensions (L x W x H): 1200 x 750 x 1050 mm Weight: 180 kg Good condition Fgsdpjd N E Rvsfx Apljb The machine was originally also designed for TIG welding. The TIG torch package is not included, and this function has not been tested. The water cooling was intended for the TIG torch package. Therefore, the unit is sold only as a stick electrode welder. A welding test with stick electrodes yielded very good results.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Leto: 2006 - tehnično učinkovit, pripravljen za delo – po celovitem servisu - omejitev zareza: 0,2–2 mm Fgsdpfx Asyu R Elspljb - največja dolžina varjenja: 2600 mm - podporne roke - PLC krmilnik

Leto izdelave: 1999, stanje: zelo dobro (rabljeno), Manufacturer year approx. 1980 Output at 50% duty cycle: 35 kVA Throat depth: 250 - 450 mm Working stroke: 40 mm Electrode force: 100 - 460 kp, stepless adjustable Electrode force at 6 bar: 460 daN Operating air pressure: 2 to 6 bar Electrode arm diameter: 60 mm Electrode holder diameter: 30 mm Insert electrodes cone MK 2 Ø 17.78 mm Arm gap: 200 / 400 mm Fodpjium Nijfx Apljgb Electrode holder adjustment: 200 mm Connected load: 83 KVA Power supply: 380 Volt, 50 Hz - 4-cycle control - stepless power adjustment - spot welding, single and series spots - parallel electrode guidance - water-cooled (without cooling unit) - electric foot switch Weight: 300 kg

Leto izdelave: 2026, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Kompletna oprema za pivovarno, polnilni stroj za pločevinke in steklenice, pasterizator, ročni depaletizator, izpiralnik in obračalnik pločevink. Oprema se nahaja na Ferskih otokih. Fgsdpfx Aoy Atr Sjplsb

Leto izdelave: 1992, stanje: dober (rabljeno), Geuma welding roller set, welding positioner set type GRS-SPE in neat and fully operational condition consisting of: Fsdpolzcibofx Aplegb 1 x powered roller 3 x idler rollers Specifications: - 7 kW - max. capacity 31 tons - roller diameter 550 mm - width of 2 rollers side by side 950 mm - center height of rollers from bottom of frame 340 mm - maximum adjustable width 2500 mm

Leto izdelave: 2021, stanje: pripravljen za uporabo (rabljen), V ponudbi je laserska prečna varilna linija. Vlakenski laser 1500W, vodno hlajen, vključen hladilni agregat, vodilo za paletni viličar, dovod zaščitnega plina, naprava za stiskanje zvarnega šiva, daljinski dostop RMACC01 SECOMEA, največja širina traku: 110mm, material traku: Jeklo: 0,25mm-3,0mm, ogljikovo jeklo: 0,25mm-2,5mm, aluminij: 0,25mm-2,5mm, baker: 0,20mm-1,2mm, dimenzije Š/V/D: 650mm/2054mm/1050mm, teža: pribl. 650kg. Ogled možen po dogovoru. Fgsdpoyugl Ujfx Aplsb

Stanje: rabljeno, Leto izdelave: 1970, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: D34E/8218, Ponudbena številka: D34E/8218 Vrsta stroja: Stroj za varjenje mrež Proizvajalec: SCHLATTER Tip: PG8 Letnik: 1970 Premer žice: 1,5-6,5 mm Fodpfxjwi Thms Aplsgb Delovna širina: 850 mm Razdalje vzdolžnih žic: 20-60 mm Razdalje prečnih žic: 10-100 mm Lokacija: V Evropi

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, delovno območje: 40 mm, Rezalno-obločna varilna naprava IDEAL BAS 040 – v zelo dobrem delovnem stanju Naprodaj je varilna naprava za čelno varjenje IDEAL, model BAS 040, primerna za mizarske delavnice, žage, lesno obdelavo ali izdelavo tračnih žag po meri. Tehnični podatki: Varjenje lesenih tračnih žag: 6 mm – 40 mm Varjenje kovinskih tračnih žag: 13 mm – 27 mm Fedpfxsynttxo Aplsgb Leto izdelave: 2008 Robustna in zanesljiva konstrukcija, značilna za blagovno znamko IDEAL Konsistentno popolni varni spoji Zelo dobro delujoče stanje Stroj je popolnoma delujoč, redno vzdrževan in pripravljen za takojšnjo uporabo. Dodatne investicije niso potrebne. Za več informacij, fotografije ali predstavitev me prosim kontaktirajte.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Industrijski sistem za varjenje in pozicioniranje cevi, zasnovan za ponovljive krožne zvare. Vključuje: - Rotacijski pozicioner za cevi (nastavljiv kot) - Avtomatizirana varilna pištola (vodno hlajena) - Krmilna enota - Hladilni sistem (chiller) - Zgornja podporna roka Funkcija: Primerno za natančno varjenje cevi in cevastih komponent z ohranjanjem konstantnega položaja in vrtenja varilne pištole. KOMPLETNA POSTAVITEV KOT NA SLIKI Fodpfx Ajy N U D Noplegb

Stanje: zelo dobro (rabljeno), Leto izdelave: 1975, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, Oprema: Na voljo je tipska ploščica, Proizvajalec: PECO N30 Nazivna moč: 40/80 kVA Leto proizvodnje: 1970, možno dvosmerno varjenje, hlajenje z vodo, pogon na zrak 32 A Dolžina varjenja: 500 mm Fsdjxlr Tdopfx Aplsgb Napetost: 380 V, 50 Hz

Leto izdelave: 1994, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2746, We are offering this used and very well-maintained Stiegler US-S 1000 with extensive accessories. This is a seam-welding bag making machine, model year 1994. Fgjdpjywuhdjfx Apleb Fully operational. Includes: - Punching station - Equipment for bottom gusset - C-folding triangle for flat film, max. 1380 mm - Bottom gusset - Allen hot foil coders - Allen thermal transfer printers - Tape unwinding unit for adhesion strips - New stacking and conveyor belts - Unwinding station with folding unit - Web guiding system - Various accessories (photos available on request) The Stiegler US-S 1000 (1994) is a reliable, classic bag making machine with a 1000 mm working width, suitable for industrial processing of PE/PP films. Minimum feed: 80 mm Maximum feed: 600 mm Maximum passage: 900 mm Minimum film width: 200 mm Maximum film width at unwinder: 1380 mm Film thickness: from 0.025 to 0.085 mm Output: up to 160 cycles/min. If you have any questions or need further information, please feel free to send us a message or give us a call.

Stanje: novo, Further technical data available on request 3D welding table systems Worktop design: top plate For more information, see catalogue/price list Fgodpfx Aed Aca Djpleb

Stanje: rabljeno, Technical Details: Number of controlled axes: 6 Workpiece weight: 20 t Operating hours: 4,290 h Controller: YASKAWA Total power requirement: 35 kVA Total weight approx.: 2,000 kg Dimensions (L x W x H) – Robotic welding cell: 2.7 x 1.1 x 2.0 m Dimensions control cabinet: L: 700 x W: 800 x H: 2,000 mm Welding Robot System includes: Robot specifications: - 6 degrees of freedom - Maximum payload: 20 kg - Working envelope: rotation curve = 1,717 mm, vertical reach = 1,417 mm, horizontal reach = 2,072 mm - Axis movement ranges: S-axis rotation = +/-180°, L-axis lower arm = +155° / -110°, U-axis upper arm = +255° / -165° - Wrist joint axes: R-axis roll = +/-200°, B-axis pitch/yaw = +230° / -50°, T-axis rotation = +/-360° - Axis speeds: S and L axes = 170°/s; U-axis = 175°/s; R and B axes = 355°/s; T-axis = 525°/s - Permissible torque: R and B axes = 39.2 Nm; T axis = 19.6 Nm Welding unit specifications: - Make: Fronius, TIG welding (AC/DC), current range 3 A / 10.1 V - 300 A / 22.0 V, water-cooled, protection class IP23 Positioner/table unit specifications: - Table surface Ø 600 mm, 360° rotation, swivels 90° left/right Wire feed specifications: - Fronius, type KD 7000, feed rate 0.2 - 22 m/min, protection class IP23, input voltage U1 230 V Hand-held control unit Control cabinet Fedpfeu Nwfbjx Aplogb i.d. *

Stanje: rabljeno, Leto izdelave: 2002, Technical Details: Fgedpou R Dfksfx Apljb x-axis travel: 1500 mm z-axis travel: 1300 mm Control system: YASNAC XRC Control Total power requirement: 3.3 kVA Total weight approx.: 3,200 kg The welding robot system consists of: - Welding rectifier MESSER, type Phoenix 500TG; MIG-MAG / TIG and MMA welding up to 500A; air-cooled; protection class IP 23 - Wire feeder EWM, type Phoenix Drive 4 ROB WE, wire diameter Ø 1.0 - 1.2 mm, feed speed 0.5 - 24 m/min, protection class IP 23 - MIG/MAG shielding gas welding torch BINZEL for wire Ø 0.8 - 1.6 mm - Robot ERCS UP6-RE00 with YASNAC XRC Control, axis travel Y-axis=1,500 mm and Z-axis=1,300 mm, arc movement swivel=approx. 90° right/left, swivel radius=1,000 mm, rotation 360°, welding torch rotation 360°, outreach max/min: 1,500 / 500mm - 1x control cabinet L:900 x W:900 x H:2,500 mm - 1x control panel ERCS-UP6-RE00, control 4.0 XRC, L:610 x W:800 x H:900 mm - 1x welding table L:4,400 x W:550 x H:1,100 mm, with compressed air connection 10 bar, working area LxW 1,200 x 340 mm, x-axis travel 3,250 mm Additionally included: 1x straightening station DETEC (with work table and straightening unit) 1x butt welding station with feed table as seen.

Stanje: rabljeno, Détails techniques : Puissance électrique : 100 kVA Profondeur de col de cygne : 600 mm Entraxe des bras : 600 mm Commande : Bus de terrain programmable Bosch Ouverture des pinces réglable : 240 - 540 mm Fjdpfx Asu Nv Eajplsgb Interface : RS 485 Tension de soudage : 500 V Tension d’alimentation : 380 V Pression d’air : 6 bar Consommation d’eau de refroidissement : 14 l/min Poids de la machine env. : 770 kg Encombrement env. : 1,5 x 0,95 x 2,1 m SOUDAGE PAR POINTS – TRANSFORMATEUR DE SOUDAGE Application : Soudage par points, par bosses et en série 1 - 1000 Hz Force de l’électrode par vérin : 11 daN Redresseur moyenne fréquence PSI 6000 avec fonction de commande intégrée (alimentation secteur 50/60 Hz) Bras d’électrode Ø 35 mm Réglage du support d’électrode : 200 mm (manuel) Entraxe des bras min. 240 mm, max. 540 mm (réglage manuel) Commande par pupitre Rexroth IntraControl VCP05 et pédale Groupe frigorifique externe pour eau de refroidissement marque Rittal SK3320.609 Incl. électrodes de rechange (refroidies à l’eau)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Stanley Tucker Stud Welding & Fastening System TE1500 + TF21D + LM310 – Stud Welding & Joining System Manufacturer: Stanley Engineered Fastening / Tucker / Emhart System consists of: Control Unit / Power Supply: TE1500 (Part No. T028 618/400) Feeding Unit / Feeder: TF21D (Part No. T059 060) Stud Setting Tool: LM310 (Part No. T133 016) Made in Germany Description: This professional Tucker stud welding system is a complete industrial joining package for fully automatic setting of: - Weld studs - Press-fit studs - Fastening elements for bodywork - Structural and sheet metal connections Tucker / Stanley systems are used worldwide in automotive manufacturing due to their: - Extreme reliability - High precision - Long service life - Perfect integration capabilities in robotic cells. The system consists of: 1️⃣ TE1500 Control Unit / Power Supply - Powers the setting device - Controls process parameters - Input: 400 V, 50/60 Hz - Type: TE1500/3.032.55.03.0405.X Fgodpfx Apsx Tfypoljb - Serial No.: 14/4409830349001 2️⃣ TF21D Feeding Unit - Automatic supply & conveying of studs - Supply voltage: 24 V - Type: TF21D.00.00/5.16F8 - Serial No.: 14/4328730020002 3️⃣ LM310 Stud Setting Tool - Pneumatic / servo-assisted setting gun - Type: LM310/K.00.00 - For final placement / pressing / setting of studs - Network: “Stud 5.14” (system-specific input value) - Serial No.: 13/3850680080004 Technical Data (from type plates): Control Unit TE1500 - Supply voltage: 400 V - Frequency: 50/60 Hz - Type: TE1500/3.032.55.03.0405.X Feeding Unit TF21D - Supply: 24 V - Type: TF21D.00.00/5.16F8 - Automatic feeder for studs / fastening elements Setting Tool LM310 - Type: LM310/K.00.00 - High-precision setting module for body shop applications Typical Applications: - Automotive industry / OEM production - Robotic cells (KUKA, ABB, FANUC, retrofit systems) - Structural sheet metal assembly - Joining technology for body parts - High-volume serial production

Stanje: rabljeno, Leto izdelave: 2022, Tehnični podatki: Tok: 9 A Skupna potrebna moč: 5 kW Teža stroja pribl.: 0,08 t Napetost: 3x 400 V Frekvenca: 50/60 Hz Razred zaščite: IP 21 Fgedpfsynhw Sjx Apljb Vrsta hlajenja: AF l Priključek gorilnika: EURO-centralni priključek 1 rabljena mobilna MIG-varilna naprava MERKLE RedMIG 2800 K

Stanje: rabljeno, Leto izdelave: 2018, Tehnične podrobnosti: Tok: 14 A Skupna potrebna moč: 8 kW Teža stroja cca.: 0,14 t Napetost: 3x 400 V Frekvenca: 50/60 Hz Zaščita: IP 23 Varilni tok: 25-400 A Fgsdpfxoynhizj Apljb Nastavitvene stopnje: 14 1 rabljena premična MIG varilna naprava CompactMIG 400 Opis proizvajalca: Vsa krmilna elektronika za podajanje žice je zasnovana kot vstavek za upravljalno ploščo. Preprosta in hitra menjava je možna kadarkoli. Vsi električni priključki so izvedeni s priključnimi vtiči. Kompaktni sistemi (verzija KW) so pregledni in imajo varčen dizajn. 4-kolesni podajalni sistem DV-26 in kolut za žico sta nameščena ob strani in lahko dostopna. Vodna črpalka je servisno prijazno nameščena v stranskem prostoru.

Stanje: rabljeno, Leto izdelave: 2017, Tehnični podatki: Električni tok: 6 A Skupna priključna moč: 3 kW Fgodpoym Ur Hjfx Apljb Približna teža stroja: 0,07 t Napetost: 3x 400 V Frekvenca: 50/60 Hz Stopnja zaščite: IP 21 Varilni tok: 25-200 A Vrsta hlajenja: AF 1 rabljena MIG MAG mobilna varilna naprava MERKLE RedMIG 2000 K Opis proizvajalca: ·Natančna nastavitev varilnega toka s 7 ali 14 prestavami. ·Načini delovanja: 2-taktni / 4-taktni / točkovanje / brezstopenjsko intervalno preklapljanje. ·Brezstopenjska nastavitev časa varjenja in časa pavze. ·Precizni podajalni menjalnik žice. ·Euro-centralni priključek. ·Standardno z možnostjo povratne žice. ·Transformator in izravnalna dušilka iz bakra, s toplotno zaščito. ·Spuščeno, pocinkano držalo za jeklenko za varen in stabilen položaj. ·Dovoljeno za uporabo v pogojih povečane električne nevarnosti, z znakom S. ·Enostavno premikanje z dvema velikima vodilnima in dvema fiksnima kolesoma.

Stanje: rabljeno, Technical details: Fedeym Umwspfx Apljgb Current: 16 A Total power requirement: 9 kW Machine weight approx.: 0.032 t Voltage: 3x 400 V Frequency: 50/60 Hz Protection class: IP 23 Welding process: MIG MAG Electrode Energy control: stepless on the unit, via TEDAC torch Adjustable parameters: choke effect, wire burn-back, ignition advance 1 used MIG MAG mobile welding machine MERKLE MobiMIG 321 K Manufacturer's description: The Merkle TEDAC system offers stepless remote energy control and display directly at the welding torch. With a slider button on the top of the TEDAC torch handle, the energy supply during welding can be increased or decreased. The currently set energy is shown directly on the TEDAC torch via a clearly visible, multi-colour LED display. The MobiMIG series devices are infinitely adjustable and feature single-knob operation (synergic mode). The clear display shows current, voltage, wire feed speed, and the a-dimension. Numerous proven welding programs for various materials and wire diameters are integrated. The MobiMIG 321 K offers more capacity, allowing the use of standard D300 spools with 15 kg wire.

Leto izdelave: 2002, stanje: nepreverjeno (rabljeno), Robot + control cabinet + no operator panel + connection cables Used, untested robot with controller and cables. No teach pendant. Not tested. Fjdpogu U Nqjfx Aplsgb

Leto izdelave: 2005, stanje: nepreverjeno (rabljeno), Weight: approx. 1700 kg Robot + control cabinet + Fedpfx Aogu U Ilspljgb no operator panel + connection cables Used, untested robot with control unit and cables. No teach pendant included. Not tested.

Stanje: dober (rabljeno), Leto izdelave: 2009, številka stroja/vozila: 20080229, This is a C-frame welding station Type: 130 MF Machine No.: 20080229 Year of manufacture: 2009 Fodovgdt Aepfx Aplegb U1N: 400V / 50Hz U20: -9V Step 1 S1: 58 kVA I2p: 6.46 kA duty cycle 100% S%: 130 kVA duty cycle 20% Fmax: 1140 daN at 6 bar I20c: 42.5 kA Q: 18 L/min Opening: up to 170 mm Throat depth: 350 mm Control cabinet: Machine No.: 20100079

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 940329, vrsta hlajenja: voda, This is a NIMAK PMP 6-2 / 100 spot welding machine. TYPE: PMP 6-2/100 MACHINE NO.: 940329 Dqm: 72N U1N: 400V 1~ 50 Hz Sn 50% DC: 100 kVA S max: 318 kVA I20c: 48 kA U20 from 5.8 V to 8.3V in 2 steps Electrode gap: 240mm - 500mm Projection length: 350mm Fmax: 1100 daN at 6 bar Cooling water: 10L/min Fodpfx Aevbgxqeplogb