Varilni Inverter nakup rabljenega (3.626)

Stanje: dober (rabljeno), Leto izdelave: 2008, Filter za dim pri varjenju, odsesavanje varilnega dima, odsesavanje dima pri spajkanju, mali odpraševalnik, mobilna filtrirna enota, filtrirna naprava za mobilno odsesavanje varilnega dima, odsesovalnik varilnega dima Ihodpox Swkkofx Af Tot -Proizvajalec: Kemper, mobilna odsesavanje varilnega dima tip 62150 -Pogon: 1,5 kW -Volumski pretok: 1000 m³/h -Odsesovalna roka: Ø 155 mm x 4200 mm -Transportne mere: 770/690/V1455 mm -Teža: 186 kg

Leto izdelave: 1993, Stanje: pripravljen za uporabo (rabljen), Stroj Hollinger MSE-II-EP-SB-300-450 je bil proizveden leta 1993. Je del obsežne linije, ki vključuje različne varilne in rezalne stroje, kar povečuje vsestranskost in produktivnost v proizvodnji. Idealen za vse, ki iščejo visokokakovostne možnosti varjenja – priporočamo nakup stroja Hollinger MSE-II-EP-SB-300-450, ki ga imamo na prodaj. Za več informacij o tej napravi nas kontaktirajte. Vrste uporabe Varjenje Ihodpfex Nr Ncsx Af Tjt

Stanje: novo, Table diameter 340 mm Table load capacity 160 kg horizontal Table load capacity 100 kg vertical Rotational speed 0.6 - 6.0 rpm Ihjdpexabm Nofx Af Tet Tilting range 0 - 90 degrees Bore 60.0 mm Motor 230 Volt Approx. machine weight 56 kg Dimensions (L x W x H) 385 x 340 x 375 mm Features: - The table can be tilted and clamped at angles from 0 to 90 degrees - Start/stop via a remote footswitch - Selectable rotation direction, right/left - Adjustable rotation time - The rotary table features a 60 mm through-hole - The turntable diameter is 340 mm - Chrome-plated surface for protection against welding spatter - Table speed adjustable from 0.6 - 6 rpm - Welding machine control via rotary table controller possible - Ground contact rated for 300 A / 100% duty cycle - Rotary table and controller are separate units - HF-protected - COM 1802 controller with overlap welding functionality - Operating manual in German COM 1802 Controller Functions: - Right/left rotation - Stepless speed adjustment - Welding torch on/off - Adjustable overlap welding - Timer for rotation time (2-stroke / 4-stroke) - Speed display Note: The controller operates at 230 V and must not be placed on the welding table. THE HOUSING OF THE ROTARY TABLE MUST BE DIRECTLY CONNECTED TO THE BUILDING EARTH.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Max. load capacity: 1000 kg Rotation speed: 0.18 – 0.58 rpm Height: 976 – 1436 mm Tilt angle: 0 – 115° Table diameter: 895 mm Voltage: 380 V Total power requirement: 2.0 kW Weight: 685 kg Dimensions (L x W x H): 2414 x 920 x 1436 mm Exhibition machine from 2024 With only approx. 2 operating hours Condition: AS NEW!! Special price on request The AK BEND SRH hydraulic welding positioner is ideally suited for welding, assembly, and maintenance work. Positioning is carried out via hydraulic rotation and tilt functions. Description: - Electro-hydraulic rotation and tilt functions - Quick handling of workpieces - Maximum productivity thanks to optimal working positions - Lifting, tilting, and rotating workpieces in a single setup - Reduced setup times by rotating components - Highest work efficiency due to ergonomic operation - Back-friendly working for the operator Ihjdew U U R Eepfx Af Tst Features: - Continuously variable speed adjustment - Free-moving foot switch - Handheld remote control with 5-meter cable - Mobile control panel with digital speed display - Analog angle display * Manufacturer video (identical turntable): ?v=Vayw8Ny64nc

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Model: Graf SL4-FF EVO Year of manufacture: 2018 Welding head direction: right, fixed head Maximum welding dimension: 2800 x 2800 mm Minimum welding dimension: officially 380 x 400 mm (in practice 330 x 350 mm) Mirror dimensions (standard): Width = 58 - 130 mm, Height = 40 - 130 mm Discharge table and extraction included (original GRAF). Ihjdpfovzp Nrsx Af Tjt Number of completed cycles: 88,524 as of 05.11.2024 Machine used on a single shift, For a long period was practically unused, Robot in blue color – unique in the world, custom-made!

Stanje: novo, Table diameter: 500 mm Table load capacity: 300 kg (horizontal) Table load capacity: 150 kg (vertical) Tilting range: 0 - 90 degrees Rotation speed: 0.2 - 2.5 rpm Bore: 90.0 mm Table height: approx. 650 mm Motor: 230 Volt Machine weight: approx. 90.0 kg Dimensions (L x W x H): 385 x 340 x 375 mm Features: - Table can be tilted and locked at any angle from 0° to 90° - Manual tilting - Start/stop via remote foot pedal Iodjxabl Sjpfx Af Teht - Selectable rotation direction (clockwise / counter-clockwise) - Adjustable rotation time - Welding machine can be controlled via integrated interface - 350 Amp ground connection Scope of delivery: - Integrated control unit - Foot pedal

Stanje: novo, Table load capacity: 1000 kg Table diameter: 900 mm Ihjdpfxjxaac Ae Af Tst Rotational speed: 0.12 – 1.2 rpm Swivel range: 0 – 135 degrees Tilting speed: 0.35 rpm Welding current: 500 A Space requirement: approx. 1475 x 1050 x 900 mm When selecting a rotary table, it is essential to consider both the rotational and tilting moments. Attention must be paid to how far the workpiece's center of gravity is from the faceplate and how eccentric the center of gravity is from the table's center. A rotary and tilting table enables optimal positioning of workpieces for welding. - Robust construction rotary table - Infinitely variable speed adjustment - Manual remote control - HF-protected Equipment: - 1 integrated control - 1 cable remote control

Stanje: novo, Table diameter: 340 mm Maximum table load (horizontal): 290 kg Maximum table load (vertical): 190 kg Rotational speed: 0.6 – 6.0 rpm Spindle bore: 60.0 mm Tilting range: 0 – 90 degrees Machine weight: approx. 62 kg Ijdpfx Aoxaafqsf Tsht Required space: approx. 380 x 340 x 425 mm Equipment/features: - The table can be tilted and clamped at any angle from 0 to 90° - Start/stop operation via remote foot switch - Selectable direction of rotation (clockwise/counterclockwise) - Adjustable rotation time - The rotary table is equipped with a 60 mm through hole spindle - The turntable has a diameter of 340 mm - The surface is chrome-plated for protection against welding spatter - Table speed is infinitely adjustable from 0.6 to 6 rpm - Control of the welding machine via rotary table control is possible - Ground contact transmits 300 A at 100% duty cycle - Rotary table and control unit are separated - HF protected - Operating manual in German Functions of COM 1000 controller: - Clockwise/counterclockwise operation - Infinitely variable speed control - Welding torch on/off - Timer for rotation time

Stanje: novo, Total power requirement: 230 Volt Table diameter: 300 mm Table load capacity: 100 kg (horizontal) Swivel range: 0 - 90 degrees Ijdpfjxaatnjx Af Teht Rotational speed: 0.2 - 2.0 rpm Rotational speed: 1.2 - 12.0 rpm Bore diameter: 20.0 mm Machine weight: approx. 50 kg Space requirement: approx. 480 x 325 x 470 mm Features: - Precision drive unit with faceplate, mounted on a stable floor stand. - Clockwise/Counterclockwise rotation - 2 infinitely variable speed ranges - Swivel range from 0° to 90°. Manual tilting - DC gear motor with worm gear, continuously adjustable - 300 mm diameter faceplate with chrome-plated surface for protection against welding spatter - Device control panel is user-friendly and easy to operate - Start/Stop operated via remote foot switch - Adjustment of rotational speed and direction takes place at the machine - HF-protected (high-frequency interference protected) Scope of delivery: - Integrated controller - Foot switch

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, KOVACO SP 50 DP je bil izdelan leta 2015. Opremljen je z robustnim varilskim pozicionerjem z dimenzijo mize 1200x1800 mm in nosilnostjo 5000 kg. Gib doseže do 1200 mm, omogoča naklon od 0 do 90 stopinj ter popolno rotacijo mize v območju 0–360 stopinj. Razmislite o priložnosti za nakup tega varilnega robota KOVACO SP 50 DP. Za več informacij o stroju nas kontaktirajte. Ihsdpox D N A Hofx Af Tjt Vrste uporabe Varjenje

Leto izdelave: 2002, Stanje: rabljeno, Postroj 2 x ultrazvočni varilni stroj KLN GCO, generator MCA, krmilna enota PXO, 30 kHz, 1.000 W, s Siemens krmiljenjem v kabini, letnik: 2002, nova cena: 7.900 €, kontaktna oseba: gospod Rainer Eckerle. Ihjdpfx Afecmum Ds Tot

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, premer vrtine: 28 mm, Table length: 3000 mm Table width: 1500 mm Table height: 200 mm Bore diameter: 28 mm Material thickness: approx. 24.5 - 27 mm Side panel height: 200 mm Weight: approx. 1,553 kg Ihodpfowvkgtsx Af Tot >>> ANNIVERSARY OFFER

Stanje: rabljeno, Leto izdelave: 2006, obratovalne ure: 89.000 h, Funkcionalnost: popolnoma funkcionalen, moč: 75 kW (101,97 KM), vrsta goriva: dizel, vrsta hlajenja: zrak, Kaeser CSD 122 SFC vijačni kompresor z vgrajenim inverterjem 2,2-10,5 m3/min, 75 kW, 8,5 bar Proizvajalec: Kaeser Iodot A Uyuspfx Af Teht Tip: CSD 122 SFC Leto izdelave: 2006 Obratovalni tlak: maks. 8,5 bar Moč: 75 kW Zmogljivost: 2,2 - 10,5 m3/min Delovne ure: 96244 h (Zadnje vzdrževanje: 88854 h) Mere: 1100 x 2200 x 1900 mm Neto teža: 1600 kg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, nazivna moč pri 50-odstotnem delovnem ciklu: 14 kVA, vhodna napetost: 380 V, vrsta hlajenja: voda, skupna masa: 300 kg, varilna moč (maks.): 40 kVA, razmak med rokam: 450 mm, skupna širina: 450 mm, skupna višina: 1.450 mm, skupna dolžina: 1.100 mm, hod: 110 mm, vhodna frekvenca: 50 Hz, Spot Welding Machine Soudometal SP14P Maximum welding current at 50% duty cycle: 14 kVA Maximum welding power: 42 kVA Electrode force: 30–200 dAN Electrode stroke: 30–110 mm Throat depth: 450 mm Power supply: 380 V / 42 A Ihsdpfswkr Inox Af Tet Secondary current: continuous current 1.85 kA; short-circuit current: 12.5 kA Electrode force: 30–200 dAN Foot pedal control Cooling water flow rate: 3 l/min Electrode arm diameter: 45 mm Electrode holder diameter: 25 mm Machine weight: 300 kg Dimensions: 1250 x 1100 x 450 mm If you need further information, we are at your service! Please do not hesitate to contact us via the contact form or give us a call. Your listing was translated automatically. Translation errors are possible.

Stanje: dober (rabljeno), Leto izdelave: 1980, TIG welding machine Messer Griesheim GW 200, AC/DC, 400 volts Isdpfxotd Hhdj Af Teht

Stanje: novo, Table diameter: 490 mm Table load capacity: 300/150 kg Iedpfogvkktex Af Tjht Swivel range: 0-90° manual Table load, horizontal: 300 kg Table load, vertical: 150 kg Bore diameter: 65 mm Table rotation speed: 0.4 - 4.0 rpm Voltage: 230 V Total power requirement: 0.2 kW Machine weight: approx. 0.1 t Space required: approx. 0.5 x 0.52 x 0.5 m The D-DWP welding positioners are equipped with a hollow shaft in the turntable. This feature significantly expands the options for flexible positioning and circumferential welding of your component. For example, this is particularly advantageous when welding with backing gas. Utilising these tilting rotary tables can increase your production rate and further improve product quality. Thanks to their compact design, the D-DWP series can be integrated into any existing production facility in a space-saving manner. Features: - Foot pedal included - Stepless speed control - Very high stability – compact model - Through-hole in the turntable - CE marking

Leto izdelave: 1991, Stanje: rabljeno, Table load capacity: 3,000 kg Swivel range: 360 degrees Vertical travel: 1,380 mm Lifting speed: 1,900 mm/min Clamping plate rotation angle: 360° Total power requirement: 4 kW Machine weight approx. 5,400 kg Space requirements approx. 3,800 x 3,700 x 4,200 mm Clamping plate distance: 2,800 mm Support arm rotation angle: 360° - Operating manual Iodpfx Afovuz N Dj Tjht

Stanje: novo, Table diameter: 690 mm Table load capacity: 500 kg Swivel range: 0 - 90 degrees Horizontal table load: 500 kg Vertical table load: 250 kg Bore diameter: 100 mm Table rotation speed: 0.2 - 1.9 rpm Total power requirement: 0.37 kW The D-DWP welding positioners are equipped with a hollow shaft in the turntable plate. This significantly extends the possibilities for flexible positioning and circular welding of your component. Consider, for example, welding with backing gas. Using rotary tables during welding can increase your production rate and further enhance product quality. Thanks to their compact design, D-DWP series welding tables can be integrated into any existing production facility, saving space. The small hollow-shaft welding positioners D-DWP are currently available with a payload capacity of 100-500 kg. Features: - Welding table with 100-500 kg capacity - with through-hole - rotary and tilt axis - steplessly adjustable speed - compact model Iodpoh Evt Uofx Af Teht - incl. foot pedal

Stanje: rabljeno, Shut-off gate valve with flange connection, knife gate valve, butterfly valve, ball valve, shut-off damper, shut-off valve, gate valve, V-flange - Weld-on flange: DIN 2633 - PN16 - Type: PN16 DN300/323 9-C22 8-23130/V Ihedpfx Afsfnxxas Tet - Inner diameter: 310 mm - Pitch circle diameter: 410/26 mm - Dimensions: Ø 460/H77 mm - Weight: 21 kg

Stanje: rabljeno, Remote control for shielding gas welding machine, shielding gas unit, welding rectifier, hand controller - Remote control Ihodpfx Afob Uhuls Tjt - Manufacturer: unknown - Type: potentiometer - Quantity: 1 unit available - Price: per piece - Dimensions: 155/105/H130 mm - Weight: 2.7 kg

Stanje: rabljeno, Welding fume filter, welding fume extraction, soldering fume extraction, small deduster - Manufacturer: Esta, Model: Small Deduster OM-8 - Drive power: 0.37 kW Iedpfxefkzbdj Af Tjht - Extraction arm: 3400 mm - Dimensions: 500 x 1330 x H1550 mm - Weight: 76 kg

Stanje: rabljeno, TIG welding machine, welding machine, TIG welder - TIG welding machine, direct current (DC) Iodpsd Nrpcjfx Af Tsht - Max. welding power: 400 A - Water-cooled - Incl. ground cable - Gas regulator - Dimensions: 610/1140/H930 mm - Weight: 310 kg

Stanje: rabljeno, Welding bar Ijdpfxed I Hizs Af Tjht -from: vacuum device Röschermatic VM 45/2 -Price: per piece -Quantity: 4 pieces -Dimensions: 635 mm / 15 mm / 30 mm -Weight: 2.2 kg/piece

Stanje: rabljeno, Welding Bar -from: Vacuum Packaging Machine: Röschermatic VM 45/2 -Price: per piece -Quantity: 2 pcs. -Dimensions: 680 mm / 15 mm / 30 mm Ihsdpsd I Hi Aofx Af Tst -Weight: 2.4 kg/pc.

Stanje: rabljeno, Spot welding machine, spot welder, spot welding system, spot welding tongs, projection welder -Manufacturer: Aro, projection welder / spot welding machine, water-cooled, type N601 Ihjdpfxjhx E T Uo Af Tot -Welding power: 65 kVA -Welding control: Aro 25-002-2 -Transport dimensions: 1000/510/H1720 mm -Weight: 538 kg