Vakuum Oblikovalne Stroje nakup rabljenega (13.645)

Stanje: pripravljen za uporabo (rabljen), fürGut VT 4,4 D vakuumska črpalka SN: 2271718, serijska številka po fotografiji, rabljena, z manjšimi sledmi uporabe, 100 % delujoča, dobava kot na slikah Fpodsi D H Tyspfx Apljg

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, skupna višina: 3.680 mm, obratovalni tlak: 6 letvica, končni tlak: −0,6 letvica, vhodna napetost: 230 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: Klimatska naprava, hitrost dviga: 166 mm/s, 2x Hova Column Slewing Crane • 2220847.03 • Max. load capacity: 50 kg • Outreach: 4 m • Custom aluminium jib lengths (depending on load capacity) • Smooth-running trolleys with guide and counter-pressure rollers • Custom load capacities • Slewing range up to 270°, adjustable • Standard fitted with HOVA chain hoist and vacuum lifter • Special solutions thanks to in-house production • Top-mounted aluminium column slewing jib cranes • Suspended aluminium column slewing jib cranes • Telescopic slewing jib cranes • Articulated arm slewing jib cranes • Mobile version for transport by forklift or crane 2x HOVAMAT Vacuum Lifter HV 50kg/90° • 2220847.01 • Horizontal and vertical handling of panels of all materials • Custom load capacities with overload protection • Lifting speed steplessly adjustable from 0–10 m/min • Operating voltage: 1x230V/50Hz • Operating pressure: min. 6–7 bar filtered compressed air • HOVA special handling grip for one-handed operation, with all controls for hoist and vacuum lifter • Low dead weight due to compact design • Suction pad arrangement as required with longitudinal and transverse beam • also suitable for gripping with magnets, mechanical or pneumatic grippers • Additional safety with HOVAMAT+ and continuous weight monitoring via scale. Lowering cut-out in case of slack chain, load release only after deposit, optional weight display possible • Optional: energy-saving unit 2x Vacuum Lifters: €6,000 each 2x Column Slewing Jib Cranes: €6,500 each Fpsdjt I S Slspfx Apleg Sale is made under exclusion of any warranty.

Stanje: rabljeno, Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, Rabljena regalna dvigalka podjetja GIS, primerna za polnjenje žagalnih strojev iz konzolnega skladišča. Sesalna glava se lahko zavrti za 90 stopinj, tako da je plošče mogoče odložiti tudi na pokončno žago. S tem je omogočeno nalaganje žage z enim upravljavcem brez fizičnega napora. Nosilnost: 2 x 250 kg Žerjavna tirnica: GIS 1000 Fpjdpfxjympxbj Aplsg Dolžina žerjavne tirnice: 24,7 m Profil žerjavne prečke: GIS 1500 ojačan Razpon: 6,45 m Dolžina žerjavne prečke: 6,95 m Vožnja žerjava: 20/5 m/min Višina prostora od 4,08 m, z obstoječimi visečimi elementi predvideno do 4.500 mm višine prostora pri 50 mm odmiku od tal. Po potrebi je mogoče tudi skrajšati višino. Regalna dvigalka je popolnoma razstavljena in skladiščena pri nas. Priloženi video je podjetja GIS, kjer je mogoče še danes kupiti naslednika tega modela.

Stanje: novo, Leto izdelave: 2021, Vakuumska miza s servo pogonom in zaslonom na dotik Vakuum nastavljivo Fpsdpfsx Thy Eox Aplog Pogon nastavljiv Približno 50 cm delovne širine

Stanje: dober (rabljeno), Leto izdelave: 2010, For sale is a packaging system from the brand Boss, model Titan 1400. The machine is fully functional and, thanks to its stainless steel surface, ideally suited for use in the food industry. Technical specifications: Year of manufacture: 2010 Power: 2.9 kW Internal dimensions: 1360*690*150 mm TÜV inspection valid until: October 2024 Sealing unit is included. The offer does not include packaging material. Fodpfx Apsuaflzolspg Upon request and for an additional charge, loading and transport can be arranged. All prices are subject to VAT. B088Itab Viewing possible by appointment. Please contact us – our team will be happy to assist you. Trade-ins or exchanges possible! Machinery purchase/sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours?

Stanje: rabljeno, Leto izdelave: 1997, Overview This linear filling machine, model ALWID Matador-HV, was manufactured in 1997 and is designed for filling liquid products into various bottle formats in small to medium-sized production environments. The machine operates on the high vacuum filling principle, enabling level-controlled filling and ensuring consistent fill heights. The filling machine is equipped with five filling stations and achieves a throughput of approximately 1,000 bottles per hour at 0.7 l. One advantage of this system is that the filling machine itself requires no format parts, allowing flexible handling of different bottle sizes. The associated capping system can process both PP screw caps and swing top stoppers (grip corks). For this purpose, the machine is equipped with two closure sorting containers, one for each closure type. There are around ten format sets available for the capper, covering round and square bottles from 0.2 l to 1.0 l. With its conventional control system and robust mechanical construction, the ALWID Matador-HV represents a reliable solution for filling applications of beverages, spirits, or specialty liquids. Fodpfx Apeyuufpoljpg Technical Data Manufacturer: ALWID Model: Matador-HV Machine type: Linear filling machine (high vacuum filler) Year of manufacture: 1997 Filling principle: High vacuum filling with level control Number of filling stations: 5 Performance: approx. 1,000 bottles per hour (at 0.7 l) Bottle formats: 0.2 l – 1.0 l Bottle shapes: round, square Closure types: PP screw caps, T-corks (grip corks) Closure sorting systems: 2 sorting bowls (PP closures / grip closures) Format sets (capper): approx. 10 sets Control system: Conventional control Condition: Used

Stanje: zelo dobro (rabljeno), Leybold Oerlikon Type: RUVAC WSU 501 Leybold Oerlikon RUVAC WSU 501 Fedpfx Apeytfzrslopg Roots Vacuum Pump Booster 505 m³/h 2.2kW DN100 For sale is a high-performance industrial Roots vacuum pump from the manufacturer Oerlikon Leybold Vacuum. The Roots pump serves as a booster pump to increase the pumping speed in vacuum systems and is typically operated together with a backing pump. It is ideally suited for industrial applications such as coating systems, vacuum furnaces, laboratory setups, or general vacuum technology. The pump stands out due to its robust construction and high pumping capacity. Technical Data: Manufacturer: Oerlikon Leybold Vacuum Model: RUVAC WSU 501 Year of manufacture: 12/2010 Pumping speed: 505 m³/h (50 Hz) / 606 m³/h (60 Hz) Max. pressure differential: 80 mbar Motor power: 2.2 kW Speed: 2900 rpm Voltage: 230 / 400 V three-phase Current consumption: approx. 9.0 / 5.2 A Duty type: S1 continuous operation Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted!) If you have further questions, feel free to contact us by phone.

Stanje: rabljeno, prva registracija: 07/1980, barva: siv, vrsta prenosa: mehanski, vzmetenje: drugo, Otto Klein Water Tank Vacuum Tank, Capacity 4,000 L, Year of Manufacture 1980. Suction hose, overhauled pump, hydraulic opening/closing, immediately operational. FOR US, CONDITION AND OVERALL IMPRESSION ARE DECISIVE, PRICE IS SECONDARY. For further questions, Mr. Faller is happy to assist you by phone. //*TRADE-IN, PART-EXCHANGE, OR COLLATERALIZATION OF YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE! All information provided without guarantee.* Find more offers on our homepage. The description and stated data do not constitute a warranty and are not binding. The purchase contract concluded at the dealership when purchasing the vehicle is legally binding. Subject to errors and prior sale! Fsdpfst Aikujx Aplopg

Stanje: novo, skupna masa: 2.700 kg, Leto izdelave: 2025, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ - We will deliver the right vacuum suction system for every application! - Fpsdpfeyxkcysx Apljg Delivery worldwide / Dealer inquiries are welcome! Internal number: #510 Images are sample images. Actual equipment and color may vary. STS V-1.5 Tank: ? 1,500-liter tank capacity ? Galvanized tank ? Tank slightly sloped to the rear for easier cleaning ? Hydraulic rear tipping approx. 20° for emptying via electro-hydraulic unit ? Side rinse opening on the tank for removing contamination or blockages without opening the tank lid ? Tank lid can be fully opened to the passenger side and secured with hook bolts ? Standard 2 safety levels installed to prevent compressor damage ? Syphon separator ? overflow with 2 balls and sight glass ? Manometer on over-suction fitting with protective bracket ? Mechanical level indicator with color scale Engine and Compressor: ? Vacuum compressor MEC 3000 with 3,500 L/min airflow ? Vacuum max. -0.8 bar (continuous operation at -0.5 bar) ? Overpressure max. 0.49 bar ? Maintenance-free V-belt drive for vacuum compressor ? Honda industrial engine GX 390 ? electric starter, oil sensor, control panel with ignition lock, battery and tank ? Internal suction hose to prevent damage inside engine unit ? Muffler for vacuum compressor with oil collector ? Stainless steel heat shield over exhaust ? 1L biodegradable compressor oil stored in oil bottle holder ? 5-liter fuel canister in holder ? Standard long-neck funnel for oil changes and refilling ? All engine components and accessories housed in lockable motor box ? Motor box made of aluminium and powder-coated in desired color Chassis: ? Self-supporting chassis, fully hot-dip galvanized ? Electro-hydraulic operation with wired remote control ? Low-bed tandem chassis 2.7t ? Track width identical to car and Sprinter for optimal driving behavior ? Lowest possible center of gravity for vacuum tank ? 2 axles with 1,750kg load capacity each and independent wheel suspension by a renowned manufacturer ? Continuous welded V-drawbar ? Sturdy metal fenders with lamp housings ? Stake mounts for quick securing of suction hoses with rubber bands ? Storage space for tools and accessories Vacuum Tank: ? Overrun brake with automatic reverse function ? Automatically locking ball hitch ? Reinforced jockey wheel ? 13-pin electrical connector Connections and Hoses: ? 2x suction hoses (3") 5m long with Perrot couplings ? 1x suction lance 3" (1500mm long) ? 1x Perrot connection (3") at the bottom of the tank lid ? 1x Perrot connection (3") at the right-hand side in travel direction Special builds and custom equipment available on request – Check out our range: For more details and/or pictures, please contact us directly. You’ll find a wide selection of other vehicles for SALE or RENT at: Subject to alteration, prior sale and errors. The buyer is required to independently verify the condition and features of the goods. Sale exclusively according to our terms and conditions and excluding any warranty.

Stanje: novo, skupna masa: 2.700 kg, Leto izdelave: 2025, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ - We deliver the right vacuum suction system for every application! - Delivery worldwide / Dealer inquiries welcome! Internal number: #514 All images are sample images. Actual equipment and color may vary. STS V-1.5 Vacuum Suction Tank Trailer Tank • 1,500-liter tank capacity • Hot-dip galvanized tank • Tank inclined slightly backwards for easier cleaning • Side flushing port in the tank for removing contamination or blockages without opening the tank lid • Tank lid opens fully to passenger side and is secured with hook bolts • Two safety stages as standard to prevent compressor damage • Siphon separator • Overflow with two balls and sight glass • Pressure gauge on suction assembly with protective bracket • Mechanical level indicator with color scale Engine and Compressor • Vacuum compressor MEC 3000 with 3,500 L air capacity • Max. vacuum -0.8 bar (continuous operation at -0.5 bar) • Max. overpressure 0.49 bar • Maintenance-free V-belt drive for vacuum compressor • Honda GX 390 industrial engine • Electric start, oil sensor, control panel with ignition lock, battery and fuel tank Fpjdpeyxkctofx Apljg • Internal suction hose to avoid contamination in the engine unit • Silencer for vacuum compressor with oil collector • Stainless steel heat shield above exhaust • 1 L biodegradable compressor oil stored in oil bottle holder • 5 L petrol canister in holder • Standard long-neck funnel for changing and refilling engine oil • All engine components and accessories secured in lockable aluminum engine box, powder-coated in desired color Chassis • Self-supporting chassis, fully hot-dip galvanized • Low-loader tandem chassis, 2.7 t • Track width identical to passenger car and Sprinter for optimal handling • Lowest possible center of gravity for the suction tank • 2 axles, each with 1,350 kg capacity, independent wheel suspension from a reputable manufacturer • Fully welded A-frame drawbar • Robust fenders with metal lamp housings • Tube supports for safe and quick hose storage with rubber bands • Storage space for tools and accessories Suction Tank • Overrun brake with reverse automatic • Self-locking ball coupling • Reinforced jockey wheel • 13-pin electrical connection Connections and Hoses • 2 suction hoses (3") 5 m long with Perrot couplings • 1 suction lance 3" (1,500 mm long) • 1 Perrot connection (3") on the tank lid bottom • 1 Perrot connection (3") on the right side in direction of travel Special constructions and custom equipment available on request – Check it out: For further details and/or photos, please contact us directly. Find a wide range of vehicles for PURCHASE or RENT at: Modifications, prior sale, and errors excepted. The buyer is responsible for inspecting the condition and equipment of the goods. Sale is exclusively governed by our terms and conditions and excludes all warranties.

Stanje: rabljeno, prevoženi kilometri: 2.500 km, prva registracija: 04/2024, skupna masa: 2.700 kg, naslednji pregled (TÜV): 04/2026, Leto izdelave: 2024, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ - We supply you with the right vacuum suction system for any application! - Delivery worldwide / Dealer inquiries welcome! Internal number: #382 The images are sample pictures. Actual equipment and color may vary. Fpsdpfxoyxkb Ne Apleg STS V-1.5 Vacuum Suction Tank Trailer Tank • Tank capacity: 1,500 liters • Tank hot-dip galvanized • Tank inclined slightly to the rear for easier cleaning • Side rinsing port in the tank to remove contaminants or blockages without needing to open the tank lid • Tank lid can be fully opened to the passenger side and is secured with hook bolts • Standard two-stage safety system installed to prevent damage to the compressor • Siphon separator • Overflow with two balls and sight glass • Manometer on the suction fitting with protective bar • Mechanical level indicator with color scale Engine and Compressor • Vacuum compressor MEC 3000 with 3,500 l air capacity • Max. vacuum -0.8bar (continuous operation at -0.5bar) • Max. overpressure 0.49bar • Maintenance-free V-belt drive for vacuum compressor • Industrial engine (petrol) • Electric starter, oil sensor, control panel with ignition switch, battery, and tank • Internal suction hose to prevent damage in the engine unit • Silencer with oil separator for vacuum compressor • Stainless steel heat shield above the exhaust • 1 liter of biodegradable compressor oil stored in oil bottle holder • 5L gasoline canister in bracket • Standard funnel with long neck for oil changes and refills • All engine components and accessories stored in a lockable aluminum engine box coated in the color of your choice Chassis • Self-supporting chassis fully hot-dip galvanized • Low loader tandem axle chassis 2.7t • Track width identical to passenger car and Sprinter for optimal driving • Lowest possible center of gravity for the suction tank • 2 axles each with 1,350 kg payload and independent wheel suspension from a renowned manufacturer • Continuous welded V-drawbar • Robust metal fenders with integrated lamp housings • Stake brackets for quick securing of suction hoses with rubber straps • Storage options for tools and accessories Suction Tank • Overrun brake with reverse automatic • Automatically locking ball hitch • Reinforced jockey wheel • 13-pin cable connection Connections and Hoses • 2x suction hoses (3") 5 m long with Perrot couplings • 1x suction lance 3" (1,500 mm long) • 1x Perrot connection (3") at the bottom of the tank lid • 1x Perrot connection (3") on the right side in driving direction Notes & Service • Worldwide delivery possible • Dealer inquiries welcome • Custom builds & individual adaptations on request For further details and/or pictures, please contact us directly. A wide range of other vehicles for PURCHASE or RENTAL can be found at: Subject to changes, prior sale, and errors. Buyers are responsible for independently verifying the condition and features of the goods. Sale is exclusively under our general terms and conditions and to the exclusion of any warranty.

Leto izdelave: 2026, stanje: novo, Do you want the BEST price/performance ratio? Contact us! Machines direct from the manufacturer! The ORIGINAL made in AUSTRIA! VACUFORMER - Vacuum Presses – versatile, functional, and economical! VACUFORMER Standard – The Workhorse! Lid: Workpiece height approx. 500 mm Press area (LxW): 2920x1320 mm Overall dimensions (LxWxH): 3100x1400x1100 mm Vacuum pump standard: 40 m³/h Features: • Vacuum table with NR membrane and quick-change membrane system • Fully welded, torsion-resistant, robust steel construction • Pressing pressure up to 9 t/m² (-900 mbar rel.) Fpedpfx Apef H S T Ujleg • Analog vacuum pressure gauge • Vacuum lever for manual vacuum control • Mechanical vacuum pressure regulator • Special, extremely durable natural rubber membrane, heat resistant up to 130°C, 680% elongation, for wood and veneer pressing • Stable, heat-resistant 16 mm phenolic resin working surface with integrated air extraction channels • Additional vacuum connection (e.g. for external vacuum bag, vacuum clamp) • Includes swivel casters • Integrated forklift pockets • Complete with cable and plug Electrical connection: 3~ 400 V, 50/60 Hz, 1.25 kW Other sizes available on request! VACUFORMER L Lid: Workpiece height approx. 650 mm Vertical: Workpiece height approx. 1000 mm Press area (LxW): 3880x1540 mm Overall dimensions (LxWxH): 4100x1760x1400 mm VACUFORMER XL Lid: Workpiece height approx. 650 mm Vertical: Workpiece height approx. 1000 mm Press area (LxW): 3880x1780 mm Overall dimensions (LxWxH): 4100x2000x1400 mm VACUFORMER XXL Lid: Workpiece height approx. 650 mm Vertical: Workpiece height approx. 1000 mm Press area (LxW): 3880x2250 mm Overall dimensions (LxWxH): 4100x2400x1400 mm Vacuum pumps: 40 m³/h, 80 m³/h, 100 m³/h, 140 m³/h VERTICAL models standard equipment: • Swiveling control cabinet on the right side • 4 FESTO pneumatic cylinders • Reinforced grid frame • Two-hand safety control • Travel signal • Siemens press time setting with alarm • Automatic pressing cycle UNIVERSALFORMERS Direct – Honest – Competent

Stanje: rabljeno, No. 3213 Thermal Treatment Plant / Vacuum Dryer WTT Used, Year of Manufacture 2017 Thermal Treatment Plant / Thermal Chamber for Wood Modification The WTT thermal chamber is a plant for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on wood thickness and type. The plant features a powerful energy and heat transfer system and operates with a gas- or oil-fired boiler using thermal oil as the heat transfer medium. Technical Data: Capacity: 5,950 - 9,900 m³ of wood per year (based on 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions (LxWxH): 10,500 x 1,300 x 1,100 mm Minimum board thickness: 10 mm Power supply: 3 x 400 V, 50 Hz + neutral + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heating output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel Duplex EN 4462 Door opens hydraulically, 1.5 kW drive Operating pressure: 0.1 to 15 bar (absolute) Operating temperature: 0 °C to 220 °C 200 mm glass wool insulation, covered with 1 mm galvanized steel sheet Main Components: 1. Autoclave for heat treatment 2. Vacuum system for extracting air from the autoclave before heating 3. Energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. Nitrogen generator 6. Gas cooling system Fsdpfxev Si Szs Aplspg Heating and Cooling System: Heat exchangers: 8 units (4 each side) Material: Stainless steel tubes (seawater resistant) Total surface area: 165 m² Cooling water consumption: 1,000 l/batch (not contaminated, only heated) Control and Operation: Control system: WTT ExoT (fully automatic) Displays: 22" color monitor with IBM computer and printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special Equipment: Hydraulic rail bridge for easy transport of wood trolleys Automatic trolley extraction with winch (1.5 kW) 2 MW thermal oil boiler (heating) Heating oil tank (4,000 l) with measuring system Insulated 20-foot steel container for heating module Safety chimney made of stainless steel (300 mm diameter, 6,000 mm length) Function Description: 1. Loading the autoclave with wood 2. Generating preliminary vacuum 3. Filling with gas 4. Heating 5. Modification 6. Cooling 7. Pressure equalization 8. Generating final vacuum / drying 9. Pressure equalization 10. Unloading Certified according to EC Pressure Equipment Directive (PED) 97/23/EC Design according to EN 13445 Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without disassembly, without transport or installation Disassembly, loading, and transport by us are possible as an option Errors in description and pricing reserved To avoid misunderstandings, on-site inspection by appointment is possible and recommended Sale takes place as is Technical data, description of condition, year of manufacture and scope of supply according to manufacturer's brochure and/or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; the following applies: "purchased as inspected" Pictures and videos are for illustration purposes only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or shipping Delivery terms: ex location

Stanje: rabljeno, Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SNDE106744, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, Vacuum casting system was used to pot epoxy resin into plastic housings. Fpjdpovnrz Dsfx Aplog

Stanje: rabljeno, Leto izdelave: 2018, Overview This vacuum evaporator was manufactured in 2018 by the Italian company REDA. The machine is designed for the gentle concentration of must, juices, and other liquid products at low temperatures, in order to preserve aroma and product quality. It is in near-new condition and is being offered for sale because it was intended for a project that was not realized. The system features an automated, CIP-capable design. Technical Specifications Performance: 100 l/h evaporation capacity at +22/+24 °C Application: Concentration of must, juices, and liquid products Operating modes: Recirculation mode or direct concentration mode Max. concentration: 55–70 °Brix Daily output: 2,400 l evaporated / 24,000 l enriched to 10% Supply: - Electrical: 25 kW, 380 V / 3Ph / 50 Hz + PE - Water: +12/+18 °C (low consumption) - Compressed air: 6–8 bar Connections: DN40 DIN, 50 mm hoses Control: PLC automation, IP65 control cabinet, digital temperature displays Scope of Supply Vacuum evaporator | REDA | CM100 | 2018 | Complete AISI stainless steel construction Evaporation chamber | Stainless steel, fully accessible for inspection Fpjdpsykrdbsfx Apleg Heat exchanger | AISI 316L tube heat exchanger Vacuum pump | Liquid ring pump with recirculating cooling Chiller unit | Heating capacity 75,000 kcal/h, cooling capacity 60,000 frig/h, 2 × 12.5 HP Copeland compressors Pumps | Stainless steel centrifugal pump and single volumetric pressure pump Steam condenser | Stainless steel surface condenser Instrumentation and tanks | Flow meters, stainless steel storage tanks for hot and cold water

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 700 kg, skupna dolžina: 2.860 mm, skupna širina: 1.230 mm, gradbena višina: 1.700 mm, Popolnoma delujoč sejemski sušilnik, Ø 1090 mm Ponujamo naš popolnoma delujoč sejemski sušilnik s premerom 1090 mm. Naprava je zelo kompaktna in praktična glede na potreben prostor ter enostavno premestitev. Tehnične podrobnosti: Priklop: potreben le vodni priklop za pršenje in 16A industrijski vtikač Ogrevalni sistem: 4 kW električni grelec Fpodpfx Apsxbz Hrslsg Merjenje vlažnosti lesa na 3 merilnih mestih Priključitvena izvedba – takoj pripravljena za uporabo Prednosti: Idealno za manjše mizarne Enostavno za transport in fleksibilno postavitev

Stanje: novo, skupna masa: 2.700 kg, Leto izdelave: 2025, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT - We will deliver the right vacuum suction system for your specific application! - Delivery worldwide / Dealer inquiries welcome! Internal number: #570 The images are sample pictures. Actual equipment and color may vary. STS V-1.5 Vacuum Suction Tank Trailer Tank • 1,500-liter tank capacity • Hot-dip galvanized tank • Tank slightly inclined to the rear for easier cleaning • Side flushing port in the tank for removal of contamination or blockages without opening the tank lid • Tank lid can be fully opened to the passenger side and is secured with hook bolts • Two safety stages installed as standard to prevent damage to the compressor • Siphon separator • Overflow with 2 balls and sight glass • Pressure gauge with protective bracket on suction set • Mechanical fill level indicator with color scale Engine and Compressor • MEC 3000 vacuum compressor with 3,500 L air flow • Maximum vacuum: -0.8 bar (continuous operation at -0.5 bar) • Maximum overpressure: 0.49 bar • Maintenance-free V-belt drive for the vacuum compressor • Honda GX 390 industrial engine • Electric starter, oil sensor, control panel with ignition lock, battery, and fuel tank • Internal suction hose to prevent fouling in engine unit • Silencer for vacuum compressor with oil trap • Stainless steel heat shield above the exhaust • 1 liter of biodegradable compressor oil stored in oil bottle holder • 5L fuel canister in holder • Standard funnel with long neck for changing and refilling engine oil • All engine components and accessories stored in lockable aluminum engine box, powder-coated in desired color Chassis • Self-supporting chassis, fully hot-dip galvanized • 2.7T tandem low-loader chassis • Track width matches passenger vehicles and Sprinter for optimum handling • Lowest possible center of gravity for the suction barrel • 2 axles, each with 1,350 kg load capacity, independent wheel suspension from a renowned manufacturer • Continuous welded V-drawbar • Robust metal mudguards with integrated lamp housings • Stake holders for fast securing of suction hoses with rubber bands • Storage space for tools and accessories Suction Barrel • Overrun brake with Rückmatic (automatic reverse) • Self-locking ball coupling • Reinforced jockey wheel • 13-pin electrical connector Connections and Hoses • 2x suction hoses (3") 5m long, each with Perrot couplings • 1x suction lance 3" (1500 mm long) • 1x Perrot connection (3") at the bottom of the tank lid • 1x Perrot connection (3") side-mounted, right in direction of travel Custom builds and specialized equipment available on request – Fpsdpfx Aexffwvspleg Take a look: For more detailed information and/or additional images, please contact us directly. A large selection of further vehicles for SALE or RENT is available at: Changes, prior sale, and errors excepted. The buyer is obligated to independently verify the condition and specification of the goods. Sale exclusively subject to our general terms and conditions and with exclusion of any warranty.

Stanje: novo, skupna masa: 3.500 kg, Leto izdelave: 2025, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ - We supply the right vacuum suction system for every application! - Delivery worldwide / Dealer inquiries welcome! Internal Number: #502 The images are sample images. Actual specifications and color may vary. STS V-2.0 Tank • Tank capacity: 2,000 liters • Tank hot-dip galvanized • Tank slightly tilted backward for improved cleaning • Side flushing port on the tank to remove contamination or blockages without opening the tank lid • Tank lid opens completely to the passenger side and is secured with hook bolts • Two safety stages as standard to prevent compressor damage • Siphon separator – overflow with two balls and sight glass • Manometer on suction assembly with protective bracket • Mechanical fill level indicator with color scale Engine and Compressor • MEC 3000 vacuum compressor, 3,500 liters air flow • Vacuum max. -0.8 bar (continuous operation at -0.5 bar) • Overpressure max. 0.49 bar • Maintenance-free V-belt drive for vacuum compressor • Honda industrial engine GX 390 – electric starter, oil sensor, control panel with ignition lock, battery, and tank • Internal suction hose design to prevent damage within the motor unit • Silencer for vacuum compressor with oil catch • Stainless steel heat shield over exhaust • 1 liter biodegradable compressor oil stored in oil bottle holder • 5-liter petrol canister in holder • Standard long-neck funnel for changing and refilling engine oil • All engine components and parts stored in lockable engine box • Engine box made of aluminum, powder-coated in desired color Chassis • Self-supporting, fully hot-dip galvanized frame • Tandem low-loader chassis, 3.5 t • Track width identical to passenger car and Sprinter for optimal driving • Lowest possible center of gravity for suction tank • Two axles, each with 1,750 kg load capacity and independent suspension by a reputable manufacturer • Continuous welded V-drawbar • Sturdy metal fenders with integrated lamp housing • Stake pockets for fast securing of suction hoses with rubber straps • Storage options for tools and accessories Suction Tank • Overrun brake with reverse-automatic • Automatic safety ball coupling • Reinforced jockey wheel • 13-pin electrical connector Connections and Hoses • 2x suction hoses (3") 5 m long, with Perrot couplings • 1x suction lance 3" (1,500 mm long) • 1x Perrot connection (3") at the bottom of the tank lid • 1x Perrot connection (3") on the right side in the direction of travel Fjdpfew Ehfrjx Apljpg Custom builds and special equipment available on request – Take a look: For further details and/or images, please contact us directly. A large selection of additional vehicles for SALE or RENT can be found at: Subject to change, prior sale, and errors. The buyer is obliged to independently inspect the condition and equipment of the unit. Sale is carried out exclusively according to our terms and conditions and to the exclusion of any warranty.

Stanje: novo, največja dovoljena obremenitev: 1.800 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, skupna širina: 1.880 mm, skupna višina: 1.910 mm, Leto izdelave: 2024, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ - We supply you with the right vacuum suction system for any application! - Delivery worldwide / Dealer inquiries are welcome! The price applies to the base model without optional equipment. The images shown are sample images. Actual equipment and color may vary. Vacuum Tanker STS V-1.5 * Tank capacity: 1,500 liters * Tank hot-dip galvanized and self-supporting chassis hot-dip galvanized * Continuous welded V-drawbar * Robust metal fenders with integrated lamp housings * Low-bed tandem axle chassis 2.7 t GVW * Track width identical to passenger cars and Sprinter for optimal driving characteristics * Lowest possible center of gravity for the suction tanker * 2 Knott axles, each with 1,350 kg load capacity and independent suspension * TÜV individual approval * Suction unit inclined for easier cleaning * Rinsing port to remove impurities or blockages without opening the tank lid * Tank lid can be opened completely to the passenger side and locked to prevent accidental closing * Tank lid secured with hook bolts (optional quick-release locking available) * Standard dual safety stages to protect the compressor – siphon separator, overflow valve with 2 balls and sight glass, vacuum gauge on oversuction unit, protective bracket for vacuum gauge and oversuction unit * Mechanical level indicator from MZ with color scale * Holders for quick securing of suction hoses with rubber tension strap * Suction hoses with Perrot couplings * 1 piece of suction hose 3” approx. 5 m long * Suction hose unit: – Side 3” suction port with slider – Suction lance 3”, 1500 mm long – Suction hose and lance do not need to be detached from the suction port after use * Enclosure for drive unit made of white powder-coated aluminum * Storage space for tools and accessories between engine enclosure and suction tank * Internal intake hose to avoid dirt ingress in the engine unit * Petrol industrial engine B&S Vanguard 13 HP equipped with oil sensor, fuel tank, and electric start * Stainless steel heat shield above the exhaust * Maintenance-free belt drive for vacuum compressor MEC 3000 with 3,500 liter air output * Muffler for vacuum compressor with oil catch * 1 liter of biodegradable compressor oil stored in oil bottle holder * 5-liter petrol canister in holder * Standard funnel with long neck for engine oil changes and refilling * All engine components and accessories stored in a lockable engine box * STS V-fender box * Side transport boxes made from aluminum * 2 side transport boxes for hoses and accessories * 6 brackets for securing components using bungee cords or tension straps Fodpfxexdv Ips Apljpg * Powder-coated in white Custom builds and special equipment available on request – Check it out: For further detailed information and/or images, please contact us directly. For a wide selection of additional vehicles for PURCHASE or RENT please visit: Subject to change, prior sale, and errors. The buyer is responsible for verifying the condition and equipment of the goods. Sale is made exclusively according to our Terms and Conditions and excludes any warranty.

Stanje: novo, skupna masa: 2.700 kg, Leto izdelave: 2025, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ - We supply you with the right vacuum suction system for any application! - Delivery worldwide / Dealer inquiries welcome! Internal reference number: #562 The images shown are sample images. Actual equipment and color may vary. STS V-1.5 Vacuum Suction Tank Trailer Tank - 1,500-liter tank capacity - Tank hot-dip galvanized - Tank inclined backward for easier cleaning - Side rinse opening in tank to remove contamination or blockages without opening the tank lid - Tank lid fully opens toward the passenger side and is secured with hook bolts - Equipped with 2 safety stages as standard to prevent compressor damage - Siphon separator - Overflow with 2 balls and sight glass - Manometer on suction assembly with protective bracket - Mechanical level indicator with color scale Engine and Compressor - MEC 3000 vacuum compressor with 3,500 l/min air output - Maximum vacuum: -0.8 bar (continuous operation at -0.5 bar) - Maximum overpressure: 0.49 bar - Maintenance-free V-belt drive for vacuum compressor - Honda industrial engine GX 390 - Electric starter, oil sensor, operation panel with ignition switch, battery, and fuel tank - Internal suction hose to prevent damage within the engine unit - Silencer for vacuum compressor with oil collection - Stainless steel heat shield over the exhaust - 1 litre of biodegradable compressor oil stored in oil bottle holder - 5L jerry can in holder - Standard funnel with long neck for changing and refilling engine oil - All engine components and accessories stored in lockable engine compartment - Engine compartment made of aluminium, powder-coated in your choice of color Chassis - Self-supporting chassis, fully hot-dip galvanized - Low-loader tandem chassis 2.7t - Track width matches cars and Sprinter vans for optimal handling - Lowest possible center of gravity for the suction tank - 2 axles each rated at 1,350kg load capacity, independent suspension from a renowned manufacturer - Fully welded V-drawbar - Robust metal fenders with lamp housing - Stake mounts for quick securing of suction hoses using elastic straps - Storage for tools and accessories Suction Tank - Overrun brake with automatic reverse function - Automatically securing ball coupling - Reinforced jockey wheel - 13-pin connector Connections and Hoses - 2x suction hoses (3") 5m long with Perrot couplings - 1x suction lance 3" (1,500mm long) - 1x Perrot connection (3") at the bottom of the tank lid - 1x Perrot connection (3") on the right side in the direction of travel Custom builds and specialized equipment available on request – Check us out: For further detailed information and/or pictures, please contact us directly. A wide selection of other vehicles for SALE or RENT can also be found at: Fodpfx Apsxffwcelopg Changes, prior sale, and errors excepted. The buyer is required to independently verify the condition and equipment of the goods. Sale is conducted exclusively under our terms and conditions and excludes any warranty.

Stanje: novo, skupna masa: 3.500 kg, barva: srebrn, Leto izdelave: 2024, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ - We supply the right vacuum suction system for any application! - Delivery worldwide / Dealer inquiries welcome! Internal number: #490 Images shown are for reference only. Actual equipment and color may vary. STS V-2.0 Tank - 2,000-liter tank capacity - Tank hot-dip galvanized - Tank slightly inclined to the rear for easier cleaning - Side cleaning port in the tank to remove contamination or blockages without opening the tank lid - Tank lid can be fully opened to the passenger side and is secured with hook bolts - Standard: 2 safety levels to prevent damage to the compressor - Siphon separator, overflow with 2 balls and inspection glass - Manometer on suction assembly with protective bracket - Mechanical level indicator with color scale Engine and Compressor - Vacuum compressor MEC 3000 with 3,500 l air capacity - Maximum vacuum: -0.8 bar (continuous operation at -0.5 bar) - Maximum overpressure: 0.49 bar - Maintenance-free V-belt drive for vacuum compressor - Honda industrial engine GX 390 with electric starter, oil sensor, control panel with ignition lock, battery, and tank - Internally routed suction hose for protection inside the engine unit - Vacuum compressor silencer with oil collector - Stainless steel heat shield above the exhaust - 1 liter biodegradable compressor oil stored in oil bottle holder Fpjdpfx Aexd Nucsplsg - 5-liter fuel canister in bracket - Standard funnel with long neck for changing and refilling engine oil - All engine components and accessories housed in a lockable engine box - Engine box made of aluminum and powder coated in desired color Chassis - Self-supporting chassis, fully hot-dip galvanized - Low-loader tandem chassis, 3.5t - Track width identical to passenger cars and Sprinter for optimal driving - Lowest possible center of gravity of the vacuum tank - 2 axles with 1,750 kg load capacity each and independent suspension by renowned manufacturer - Continuous welded V-drawbar - Sturdy mudguards with metal lamp housings - Stake holders for rapid securing of suction hoses with rubber bands - Storage space for tools and accessories Vacuum Tank Assembly - Overrun brake with reverse automatic (Rückmatic) - Automatically locking ball coupling - Reinforced jockey wheel - 13-pin electrical connector Connections and Hoses - 2x suction hoses (3'') 5m long with Perrot couplings - 1x suction lance 3'' (1,500 mm long) - 1x Perrot connection (3'') mounted at bottom of tank lid - 1x Perrot connection (3'') side-mounted, right in driving direction Custom builds and special equipment available on request - Check it out: For further details and/or photos, please contact us directly. A wide range of other vehicles for SALE or RENT can be found at: Subject to change, prior sale, and errors. The buyer is responsible for verifying the condition and equipment of the goods independently. Sale is exclusively subject to our General Terms and Conditions and excludes any warranty.

Stanje: rabljeno, Leto izdelave: 1999, Overview The Sensometic vacuum filler was manufactured by Krones in 1999. The offer also includes a rinser, an Alcoa capper, and an inline cold glue labeller. The equipment is available for inspection at any time. Technical details Capacity: - 12,000 bottles/hour with 0.7L glass bottles - 10,000 bottles/hour with 1.0L glass bottles - 6,000 bottles/hour with 1.5L PET bottles Formats: - 0.7L glass bottle - 1.0L glass bottle - 1.5L PET bottle Closure types: - 28 mm plastic screw cap - Press-on cap Labels: - Body, back, neck loop, neck ring Filling product: - Raspberry and various fruit syrups - Special Hesperiden vinegar Filling temperature: 25°C Machine flow: left to right (L-R) Control system: Siemens S5 Scope of supply: Fjdpfxoukkvnj Aplepg - Rinser | Krones | Variojet | 3-channel rinser: steam, sterile water, air - Vacuum filler | Krones | Sensometic - Capper | Alcoa | PP 10 / 360 - Capper | Alcoa | K 10 / 360 - Cold glue labeller | Krones | Prontomatic

Stanje: rabljeno, Leto izdelave: 2021, Overview The filler and capper block was manufactured in 2021 by the German company ALWID. It is part of a new filling line and is capable of filling chemical products into plastic containers. The machine has ATEX certification, enabling it to process explosive products. The machine can be purchased with warranty. Technical Data - Fully automatic rotary filler - Filling system: mass flow measurement system, Type: Endress+Hauser LPG MASS - Number of filling stations: 16 - Maximum container dimensions: Height: 50-300 mm, Diameter: 20-100 mm Fpedpfxemk I Dtj Aplog - Pressurized feed tank for consistent flow through the flow meter - Below-surface filling to prevent foam formation during filling - Adjustable bottle neck centering - Electronic fill level measurement - CIP capable - Designed for dip tube handling Fully automatic rotary capper - Number of capping heads: 5 with torque adjustment via friction clutches - Fully automatic cap sorting and feeding via BONINO disc sorter with elevator - Chute switch to stop the machine when caps are missing - Cap bunker - Cap presence control

Stanje: rabljeno, Leto izdelave: 2018, Overview The gravity filling machine is a rotary, fully automatic device suitable for filling bottles, tinplate cans, or jars. It is used to add liquids (such as brine, oil, vinegar, sauce, sugar solution, etc.) into containers already filled with solids. The machine can also be used for filling empty bottles. The filler block can be inspected at any time. Technical Details Number of filling stations: 48 Fedpfx Apsnhikijlepg Pitch circle diameter: 1,560 mm Output (last running): 250–300 bottles/min at 500ml fruit syrup For twist-off caps, a separate capping unit must be arranged 160–200 bottles/min at 250ml maple syrup Applied plastic caps can be fitted using the integrated AROL capper Dimensions Length: 3,000 mm Width: 2,500 mm Height: 2,500 mm Weight: 6,500 kg Electrical Specifications Voltage: 400 V – 50 Hz Control voltage: 24 V DC Installed power: 20 kW Scope of Delivery Filler | Zilli & Bellini | GD48/12 | 2018 Capper | Arol | TSI - EURO VP - W6 | 2018

Stanje: rabljeno, Leto izdelave: 2019, Overview This vacuum filling and capping block was manufactured in 2019 by the German company ALWID Maschinenbau GmbH. The model ALWID-SUPERIOR-48HV-10PP is designed for filling glass bottles with a high vacuum system, making it ideal for low- to medium-viscosity liquids such as spirits or similar products. The system is equipped with 48 filling valves and a 10-head ROPP capping unit, ensuring efficient and highly precise operation. With a capacity of up to 12,500 bottles per hour (0.7 L), it offers a professional solution for high-speed bottling lines. The machine is CIP-capable, fitted with spray balls, and features a Siemens S7 control system. It has approximately 14,000 operating hours and is already dismantled. Missing peripheral components such as cap sorter, cap hopper/elevator, and chutes can be supplied upon request; a factory overhaul is also possible. Technical data Filling system: High vacuum with liquid ring pump Capping system: 10-head ROPP (PP) capper Fpodpfx Ajxqhvlsplsg Output: Up to 12,500 bottles per hour (0.7 L bottles) Filling valves: 48 Bottle size: Max. 105 mm (W) × 65 mm (D) for shaped bottles (every second valve used) Control system: Siemens S7 Cleaning system: CIP with spray balls Operating hours: Approx. 14,000 h Working direction: Right to left Dimensions (machine): 4.20 m × 2.80 m × 2.90 m (W×D×H) Dimensions (filling tower): 1.40 m × 1.30 m × 3.40 m (W×D×H) Scope of delivery Filling and capping block | ALWID Maschinenbau GmbH | ALWID-SUPERIOR-48HV-10PP | 2019 | High vacuum filler with 48 filling stations and 10 ROPP capping heads, Siemens S7 control, CIP-capable, approx. 14,000 operating hours Filling tower | ALWID Maschinenbau GmbH | – | 2019 | 3.40 × 1.30 × 1.40 m, part of the system Format parts | ALWID Maschinenbau GmbH | – | 2019 | 10x PP28x22 mm deep capping heads, 1x format set for 76 mm straight-neck bottle Accessories | 2 EUR pallets with format and head components