Tri Točke Mikrometer nakup rabljenega (67.121)

Stanje: novo, Sheet length: 4,000 mm Sheet thickness: 20.0 mm Cutting width: 4,000 mm Total power requirement: 22 kW Weight approx.: 20,000 kg Dimensions (LxWxH): 4,850 x 2,300 x 2,180 mm Technical Data: Sheet thickness: 20 mm Cutting length: 4,000 mm Cutting angle: 2.30° Backgauge: motorized, 1,000 mm Motor power: 22 kW Length: 4,850 mm Width: 2,300 mm Height: 2,180 mm Weight: 20,000 kg Equipment: Swing beam design NC preselection control ELGO P 40 T Touch with backgauge and cutting gap adjustment from the front via control panel Motorized backgauge up to 1,000 mm User-friendly control panel mounted on a swing arm Hydraulic hold-downs positioned close to the cutting line Foot switch Cutting gap adjustment Cutting line illumination Wide support table with ball inserts Upward-folding finger guard, 1,000 mm 1 side gauge with T-slot 2 sheet support arms with T-slot Simple blade replacement and regrinding Adjustable cutting length for economical processing Lower blade, reversible 4 times Upper blade, reversible 2 times Fjdpfx Afsxxd D Uoljpb Qualified after-sales service Operating manual in ENGLISH Machine and equipment conform to CE regulations

Stanje: zelo dobro (rabljeno), Independent machine (top) Working width (min/max) mm: max. 1350 mm Min/max working height (thickness) mm: 3 - 130 mm Separate electrical control panel Electronic control - Programmer PCM (Costa Sanding Manager software) Feed speed m/min (adjustable): 4 - 24 m/min No. 1 vacuum unit (11 kW) Pressure shoes for short workpieces Air blowers on the sanding belts Total connected load (kW): 69 No. 7 upper working units: 1°) Cross sanding unit TR7, sanding shoe with No. 84 (TPR16) segments (15 kW with inverter, 3-16 m/sec) 2°) Cross sanding unit XLS (fine trimming), No. 122 sanding elements (1.5 kW with inverter) 3°) Longitudinal unit FTR-3, roller (diam. 30 mm) 2.2 kW with inverter, 40 Sh (3 - 20 m/sec) 4°) Longitudinal sanding unit TP16, sanding shoe with No. 84 segments (15 kW with inverter, 3-16 m/sec) 5°) Longitudinal sanding unit Super-Finisher SF/3250, sanding shoe with No. 84 segments (15 kW with inverter, 3-16 m/sec) 6°) Scotch-Brite brush SB180 (1.5 kW) diam. 180 mm 7°) Rotating air jet blowers for workpiece cleaning SR Fodpfegx Hnhox Aflepb

Stanje: rabljeno, moč: 160 kW (217,54 KM), TRIA 120-80 FN Granulator / Granulators New hydraulics, new blades, new bearings Fpsdpfxjxgrfvj Aflob Drive power: 160.0 kW Rotor knives: 7x2 Stator knives: 2x2 Rotor diameter: 700 mm Rotor width: 1200 mm Feed opening: 800 x 1200 mm

Stanje: novo, Sheet thickness: 6 mm Bending length: 2550 mm Upper roll diameter: 190 mm Pre-bending: 5 mm Sheet length: 2550 mm Model MRM-S 3-Roll Motorized Asymmetric Plate Bending Machine Steel-welded frame – Motorized adjustment of the rear roll Options: Hardened rolls: €1,800 Extended roll shafts: €500 Segment rolls: €750 Digital display: €800 Fodpfx Afsflvl Aelspb All prices excl. VAT.

Stanje: zelo dobro (rabljeno), Rollenanlage für LACKIERUNG und OBERFLÄCHENBEARBEITUNG (UV), maximale Arbeitsbreite 1.300 mm. Bestehend aus: 01) Nr. J05012) Schleifmaschine "COSTA LEVIGATRICI" Modell SN TR LFT 3 TT 1350 02) Nr. Y11034) Walzenauftragsmaschine "SORBINI by CEFLA" Modell SMARTCOATER MF-EVO 03) Nr. Y11036) UV-Trockner (1 Lampe) "CEFLA" Modell UV 2000 M1 - TT 2000 04) Nr. Y11037) Walzenauftragsmaschine "SORBINI by CEFLA" Modell SMARTCOATER M-1 AN Fpodpohyty Ajfx Afleb 05) Nr. Y11041) UV-Trockner (2 Lampen) "CEFLA" Modell UV-R M20 06) Nr. Y11061) Schleifmaschine "COSTA LEVIGATRICI" Modell SH3 TR TTTTR 1350 07) Nr. Y11042) Walzenauftragsmaschine "SORBINI by CEFLA" Modell SMARTCOATER MF-EVO 08) Nr. Y11039) UV-Trockner (2 Lampen) "CEFLA" Modell UV-R M2 09) Nr. Y11035) Walzenauftragsmaschine "BURKLE" Modell RCL-M 1300 (e.a.s.y. Coater) 10) Nr. Y11043) UV-Trockner (3 Lampen) "CEFLA" Modell UV-R M3

Stanje: rabljeno, moč: 160 kW (217,54 KM), New hydraulics, new knives, new bearings Drive power: 160.0 kW Rotor knives: 7x2 Fodpfx Aexgtqajfljpb Stator knives: 2x2 Rotor diameter: 700 mm Rotor width: 1200 mm Feed opening: 800 x 1200 mm

Stanje: novo, Sheet length: 2060 mm Sheet thickness: 4 mm Dimensions (LxWxH): 2700 x 2250 x 1400 mm Motor: 7.5 kW Weight approx.: 3000 kg Standard accessories: - NC control - Programmable, motorized backgauge with 750 mm travel - Shadow line lighting - 1 piece stop rail with measuring scale - 2 sheet support arms - 1 sheet support arm (for models 1106, 1306, 1505) - Finger guard - Ball transfer table - Easy front adjustment of blade gap - Ball screw spindle - Stroke counter Fpjdpfx Afogickrelob - Portable foot pedal with emergency stop button - Light barrier on rear safety guards

Stanje: novo, Sheet length: 2560 mm; Sheet thickness: 4 mm; Dimensions (LxWxH): 3200 x 2250 x 1400 mm; Motor: 7.5 kW; Weight approx.: 3500 kg Standard equipment: - NC control - Programmable, motorized backgauge with 750 mm travel - Shadow line lighting Fodpfxsgickvo Aflspb - 1 stop rail with measuring scale - 2 sheet support arms - 1 sheet support arm (for models 1106, 1306, 1505) - Finger guard - Ball transfer table - Easy front-side blade clearance adjustment - Ball screw - Cut counter - Portable foot pedal with emergency stop button - Light barrier on rear safety devices

Stanje: novo, Working width: 1,500 mm Working length: 3,000 mm Accuracy +/-: 0.05 mm Maximum loading weight: 1,250 kg Dimensions (LxWxH): 8,100 x 2,200 x 2,560 mm Approx. weight: 7,900 kg Laser power: 3 kW Max. material thickness St 37-42: 16 mm Fjdpfxjrh Rpfe Aflopb Max. for aluminum: approx. 5 mm Max. for stainless steel: approx. 5 mm The FLC series is a fast, precise, reliable, and cost-effective fiber laser cutting machine. It is a high-efficiency, upper-class standard laser cutter. Capable of supporting up to 30,000 W laser power, it is an excellent choice for cutting thick plates. FLC fiber laser cutting machines are typically used for manufacturing agricultural machinery, textile machinery, food machinery, construction machinery, elevators, and other large machinery and equipment. This is an ideal cutting machine for those looking to outsource production. It allows easy blowing, cutting, pausing, calibration simulation, etc. via wireless remote control. Standard nesting software quickly prepares parts for cutting without operator intervention and includes a flycut function. Thanks to the dual exchange table, cutting can continue without waiting times. All our machines are manufactured to European standards and come with a CE certificate. FLC series machines feature nozzle cleaning and a dual camera system. Available cutting areas: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. Our laser head features autofocus, active anti-collision, and auto-view functions that detect obstacles and move automatically. Cutting heads are equipped with automatic cooling. The bridges used in all our machines are made of welded aluminum alloy panels in a single-piece construction. This ensures rigidity, prevents deformation from impacts and loads, and maintains shape. Their weight is three times less than comparable steel bridges, resulting in higher speeds and accelerations with less motor power. Included accessories: - Water chiller - Electrical cabinet cooling - Automatic focus head - Nesting software - 19-inch touchscreen CNC control - Flycutting capability - Nozzle and lens starter kit - Scrap drawers - Automatic table exchanger - Automatic nozzle cleaning - CE conformity - On-site machine training - Wireless remote enquiry - Automatic lubrication system - Dual camera system Laser type: Closed structure CNC unit: Cyp Cut Autofocus: Yes Working area: 1500 x 3000 mm Repeatable positioning accuracy: ±0.03 mm/m Positioning accuracy: ±0.05 mm/m Max. speed: 120 m/min Max. acceleration: 1.2 G Max. load capacity (per table): 1,250 kg Laser source: 2,000 W (Han’s resonator) Table changeover time: 15 s Laser cutting head: Raycus, autofocus Power supply: 380 V, 50Hz (three-phase) Supported graphic formats: dwg / dxf / stp Chiller: Available Average machine dimensions: 2,200 x 8,100 x 2,560 mm

Stanje: novo, Laser power: 4Loading capacity: 1250x travel: 2020y travel: 4050z travel: 350Positioning accuracy: 0.05Repeatability: 0.03Table change time: approx. 10Cooling system: Water chillerWeight approx.: 11500Dimensions (LxWxH): 4400 x 10000 x 2120 The FLC series is a fast, sensitive, reliable and cost-effective fiber laser cutting machine. It is a high-efficiency laser cutting machine that meets the standards of the upper price class. It can support laser power up to 30,000 W, making it an excellent choice for cutting thick plates. FLC fiber laser cutting machines are commonly used for manufacturing agricultural machinery, textile machinery, food processing equipment, construction machinery, elevators, and other large machines and systems. It is an ideal cutting machine for those looking to outsource cutting operations. The wireless remote control allows easy blowing, cutting, pausing, calibration simulation, and more. Fsdpfx Aoruwbijfljpb A standard nesting software program very quickly prepares parts for cutting without any operator intervention. It also features a fly-cutting function. The double automatic changing table allows you to continue cutting without downtime. All our machines are manufactured according to European standards and come with a CE certificate. Our FLC machines are equipped with nozzle cleaning and a dual camera system. Choose from cutting area sizes of 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. The laser head is equipped with autofocus and an active anti-collision feature, as well as an auto-view function that detects obstacles and automatically moves. Cutting heads are equipped with automatic cooling. The bridge used in all our machines consists of a welded aluminum alloy sheet construction in a single piece. This unibody design ensures the rigidity of the bridge and prevents deformation due to impacts, overlaps, or loads. Furthermore, the lightweight structure—three times lighter than steel profile bridges—enables high speeds and acceleration with lower motor power. Accessories included: - Water chiller - Control cabinet cooling - Automatic focus head - Nesting software - 19" touchscreen CNC control - Fly cutting - Nozzles and lenses starter kit - Scrap collection drawers - Automatic table changer - Automatic nozzle cleaning - CE compliance - On-site machine training - Wireless remote monitoring - Automatic lubrication system - Dual camera SPECIFICATIONS VALUEWorking area 2000 x 4000 mmLoading capacity 1200 kgXY axis travel 2020 x 4050 mmZ axis stroke 350 mmXYZ axis guide 4-point ball cageXY axis drive system Rack and pinionZ axis drive system Ball screwXY axis speed 100 m/minZ axis speed 30 m/minXY positioning accuracy 0.05 mmXY repeatability 0.03 mmTable change time 10 secLaser source Raycus / Hans / JPTLaser source output power 2 / 3 / 4 / 6 / 8 / 12 / 20 kWCNC control system FscutLaser cutting head Raytools / BOCI / WSXSupported gases Air/O2/N2

Stanje: novo, Laser power: 12 kW | Loading capacity: 1250 kg | X-axis travel: 2020 mm | Y-axis travel: 4050 mm | Z-axis travel: 350 mm | Positioning accuracy: 0.05 mm | Repeatability: 0.03 mm | Table changeover time: approx. 10 s | Cooling system: Water chiller | Weight: approx. 11,500 kg | Dimensions (LxWxH): 4400 x 10,000 x 2120 mm The FLC series is a fast, sensitive, reliable, and cost-efficient fiber laser cutting machine. This high-efficiency machine competes with top-tier models and supports a maximum laser power of up to 30,000 W, making it an excellent choice for cutting thick plates. FLC fiber laser cutters are commonly used in the production of agricultural machinery, textile machines, food processing equipment, construction machinery, elevators, and other large machines and systems. Ideal for businesses seeking to outsource cutting operations. Functions such as blowing, cutting, pausing, calibration simulation, and more are possible via the wireless remote control. Standard nesting software quickly prepares parts for cutting without operator input and includes a flycut function. Thanks to its dual exchange table design, cutting operations can continue seamlessly without waiting time. All our machines are manufactured according to European standards and carry a CE certificate. FLC models are equipped with nozzle cleaning and a dual camera system. Available cutting areas: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. The laser head features autofocus and an active anti-collision function, along with an auto-view function that detects obstacles and automatically adjusts its path. Cutting heads feature automatic cooling. The bridges in our machines are made of one-piece, welded aluminum alloy construction. This design ensures rigidity and prevents deformation from shocks, overlaps, or loads. Moreover, these bridges are three times lighter than steel profiles, enabling higher speed and acceleration with reduced motor power. Accessories included: - Water chiller - Control cabinet cooling - Automatic focus head - Nesting software - 19-inch touch CNC control - Flycut function - Nozzle and lens starter kit - Parts debris drawers - Automatic table exchanger - Automatic nozzle cleaning - CE compliance - On-site machine training Fpedpfsruwbqex Aflob - Wireless remote monitoring - Automatic lubrication system - Dual camera system SPECIFICATIONS | VALUE Working area: 2000 x 4000 mm Loading capacity: 1200 kg XY axis travel: 2020 x 4050 mm Z-axis travel: 350 mm XYZ axis guide: 4-point ball cage XY drive system: Rack and pinion Z-axis drive system: Ball screw XY-axis speed: 100 m/min Z-axis speed: 30 m/min XY positioning accuracy: 0.05 mm XY repeatability: 0.03 mm Table change time: 10 s Laser source: Raycus / Hans / JPT Laser output power: 2 / 3 / 4 / 6 / 8 / 12 / 20 kW CNC control system: Fscut

Stanje: novo, Laser power: 2Loading capacity: 1250x-Travel (X): 2020mmTravel (Y): 4050mmTravel (Z): 350mmPositioning accuracy: 0.05 mmRepeatability: 0.03 mmTable changeover time: approx. 10 secCooling system: water chillerApprox. weight: 11,500 kgDimensions (LxWxH): 4400 x 10,000 x 2120 mm The FLC series is a fast, responsive, reliable, and cost-effective fiber laser cutting machine. It is a high-efficiency laser cutting system that meets premium-level standards. Capable of supporting laser power up to 30,000 W, it is an excellent choice for cutting thick sheet metal. FLC fiber laser cutting machines are commonly used in the production of agricultural machinery, textile machinery, food processing equipment, construction machinery, elevators, and other large machines and plants. It is an ideal cutting system for those looking to outsource their work. Enables easy blowing, cutting, pausing, calibration simulation, etc., via wireless remote control. Comes standard with nesting software, that quickly and automatically prepares parts for cutting without operator intervention. Also features a flycut cutting function. With a dual exchange table, you can continue cutting without any waiting time. All our machines are manufactured to European standards and feature CE certification. Our FLC machines include automatic nozzle cleaning and a dual camera system. Available cutting areas: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. Our laser head offers autofocus, active anti-collision functionality, and auto-view for obstacle detection and automatic movement. Cutting heads are equipped with automatic cooling. All machine bridges are fabricated as one-piece welded aluminium alloy sheet structures. This single-piece design ensures bridge rigidity and prevents deformation during collisions, overlaps, or high loads. In addition, their structure is three times lighter than steel bridges, allowing higher speeds and acceleration with lower motor power. Included accessories: - Water chiller - Electrical cabinet cooling - Automatic focus head - Nesting software - 19-inch touch CNC control - Fly cutting - Nozzles and lenses incl. starter kit - Workpiece debris drawers - Automatic table changer - Automatic nozzle cleaning - CE compliant - On-site machine training - Wireless remote monitoring - Automatic lubrication system - Dual camera system SPECIFICATIONS VALUE Working area: 2000 x 4000 mm Loading capacity: 1200 kg XY Travel: 2020 x 4050 mm Z-Axis Travel: 350 mm XYZ Axis Guidance: 4-point ball cage XY Axis Drive System: Rack and pinion Z Axis Drive System: Ball screw XY Axis Speed: 100 m/min Z Axis Speed: 30 m/min XY Position Accuracy: 0.05 mm Fpsdpfxjruwbxs Aflsb XY Repeatability: 0.03 mm Table Changeover Time: 10 sec Laser Source: Raycus / Hans / JPT Laser Output Power: 2 / 3 / 4 / 6 / 8 / 12 / 20 kW CNC Control System: Fscut Laser Cutting Head: Raytools / BOCI / WSX Support gases: Air / Oxygen / Nitrogen

Stanje: novo, Working area: 2000 x 6000 mm Loading capacity: 1450 kg X-axis travel: 2020 mm Y-axis travel: 6050 mm Laser power: 2 kW Positioning accuracy: 0.05 mm Repeatability: 0.03 mm Weight approx.: 11,500 kg Dimensions (LxWxH): 10,000 x 4,400 x 2,120 mm The FLC series is a fast, responsive, reliable, and cost-effective fiber laser cutting machine. It is a high-efficiency laser cutting system designed to upper-tier standards. With compatibility for laser power up to 30,000 W, it is an excellent choice for cutting thick plates. FLC fiber laser cutting systems are commonly used for processing agricultural machinery, textile machinery, food processing equipment, construction equipment, elevators, and other large machinery and systems. Fpsdpjruwb Hjfx Afleb This is an ideal cutting machine for those who wish to outsource their cutting tasks. A wireless remote control enables easy blowing, cutting, pausing, calibration simulation, and more. Comes standard with advanced nesting software that optimizes parts nesting for efficient, operator-free cutting. Also features a Flycut mode for continuous cutting of multiple small shapes. The dual shuttle (exchange) table system allows non-stop cutting with zero downtime. All machines are manufactured according to European standards and come with CE certification. Our FLC machines are equipped with automatic nozzle cleaning and a dual camera system. Available cutting tables: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. Our laser heads feature autofocus, active anti-collision, and Auto-View function for obstacle detection and automatic repositioning. Cutting heads have automatic cooling. All machines use a single-piece crossbeam made from welded aluminum alloy sheet. The monolithic design ensures maximum rigidity, prevents deformation due to impacts, overlaps, or loading, and provides a lightweight structure (three times lighter than steel bridge profiles) for higher speeds and acceleration at lower motor loads. Included accessories: - Water chiller - Electrical cabinet cooling - Automatic autofocus head - Nesting software - 19-inch touchscreen CNC control - Flycut capability - Nozzles and lens starter kit included - Parts debris drawers - Automatic table changer - Automatic nozzle cleaning - CE compliance - On-site machine training - Wireless remote diagnostics - Automatic lubrication system - Dual camera system

Stanje: novo, Laser power: 6 kW Loading capacity: 1250 kg Positioning accuracy: 0.05 mm Repeatability: 0.03 mm Table change time: approx. 15 s Cooling system: water chiller Weight approx.: 17,500 kg Dimensions (LxWxH): 4,400 x 9,500 x 2,350 mm Max. speed: 120 m/min Tube diameter: 220 mm Working area: 2,000 x 6,000 mm The FLC-P Series is a fast, precise, reliable, and cost-effective fiber laser cutting machine for tubes and profiles. It’s a high-efficiency laser cutting machine that meets upper-tier standards and can reach laser power ratings up to 20,000 W, making it a very good choice for thick plate cutting. FLC fiber laser cutters are commonly used in the processing of agricultural machinery, textile machinery, food machinery, construction machinery, elevator manufacturing, and other large machines and plants. You do not need to purchase two separate machines—you can cut both sheet metal and tube profiles with this unit. The compact design saves space. A machine with dual-purpose functionality: capable of cutting both sheet material and metal tubes/profiles. Standard tube/profile cutting length is 6 meters, extendable to 9 meters upon request. The tube diameter can be used up to a maximum of 350 mm. The chucks can clamp and self-center automatically at the push of a button. Wireless remote allows for easy blowing, cutting, pausing, calibration simulation, and more. Standard nesting software quickly nests parts for cutting with minimal operator input and includes a flycut function for rapid straight-line cutting. The double exchange table enables continuous cutting without downtime. All of our machines are manufactured to European standards and come with a CE certificate. Our FLC models feature nozzle cleaning and a dual-camera system. Available working areas: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. Our laser head features autofocus and active anti-collision, as well as an auto-view function that detects obstacles and moves automatically. Cutting heads are equipped with active cooling. All bridges on our machines are single-piece welded aluminum plate constructions. This design ensures rigidity, prevents deformation under loads or shocks, and allows high speeds and accelerations due to its lower weight (three times lighter than steel bridges). Accessories included: - Water chiller - Control cabinet cooling - Automatic focus head - Nesting software - 19-inch touch CNC controller - Flycutting - Nozzles and lenses (starter kit included) - Parts scrap drawers Fpsdpotwtn Iefx Afleb - Automatic table changer - Automatic nozzle cleaning - CE conformity - On-site machine training - Wireless remote query - Automatic lubrication system - Dual camera SPECIFICATION VALUE Working area:

Stanje: novo, Sheet length: 3,200 mm Sheet thickness: 6.0 mm Cutting width: 3,200 mm Total power requirement: 7.5 kW Weight approx.: 5,100 kg Dimensions (LxWxH): 3,800 x 1,750 x 1,700 mm Fpjdpsvap Tusfx Afljb Technical data: Sheet thickness: 6 mm Cutting length: 3,200 mm Cutting angle: 1.30° Backgauge: motorized, 1,000 mm Motor power: 7.5 kW Length: 3,800 mm Width: 1,750 mm Height: 1,700 mm Weight: 6,250 kg Equipment: Swing beam design NC preselect controller ELGO P 40 T with backgauge and blade gap adjustment directly from the control panel motorized backgauge up to 1,000 mm clearly arranged control panel mounted on a swivel arm hydraulic hold-downs positioned close to the cutting edge foot switch blade gap adjustment cutting line illumination wide support table with ball transfers foldable finger guard, 1,000 mm 1 side stop with T-slot 2 sheet support arms with T-slot easily replaceable and re-grindable blades adjustable cutting length for economical operation bottom blade with 4 cutting edges upper blade with 2 cutting edges qualified after-sales service operating manual in ENGLISH Machine and equipment in accordance with CE regulations

Stanje: novo, Pressure: 100 Cylinder: horizontally adjustable Stroke: 350 mm Stand width: 1050 mm Working speed: 2 mm/s Fpsdpfxswwngtj Afljb Rapid traverse: 28 mm/s Length: 1900 mm Width: 850 mm Height: 2250 mm Weight approx.: 1030 kg Cylinder horizontally adjustable: 650 mm - Cylinder adjustable horizontally - 650 mm Height-adjustable work table – conveniently adjustable via chain Safe two-hand operation – convenient control via hand lever and push button Adjustable maximum pressure – individually adaptable for various applications Integrated manometer – enables precise pressure monitoring during operation CE-compliant design – manufactured according to current safety and quality standards Operating manual – detailed and easy to understand, available in German and English Two working speeds – for particularly precise and efficient work Image is a sample photo

Stanje: novo, Pressure: 20 tons Cylinder: stationary Stroke: 350 mm Frame width: 520 mm Working speed: 4 mm/sec Return speed: 30 mm/sec Length: 1200 mm Width: 500 mm Fedpfowwnhksx Afljpb Height: 1800 mm Approximate weight: 210 kg Height-adjustable work table – manually adjustable for maximum operational flexibility Safe two-hand operation – convenient control via hand lever and push button Adjustable maximum pressure – can be customized for various applications Integrated pressure gauge – enables precise pressure monitoring during operation CE-compliant design – manufactured according to current safety and quality standards Operating manual – detailed and easy to understand, available in German and English Two working speeds – for especially precise and efficient work

Stanje: novo, Sheet length: 3,200 mm Sheet thickness: 6.0 mm Cutting width: 3,200 mm Total power requirement: 7.5 kW Weight approx.: 8,500 kg Dimensions (LxWxH): 4,650 x 1,700 x 1,800 mm Technical data: Sheet thickness: 6 mm Cutting length: 4,200 mm Cutting angle: 1.50° Backgauge: motorized, 1,000 mm Motor power: 7.5 kW Length: 4,650 mm Fpsdpfx Asd Ab Hhjfljb Width: 1,700 mm Height: 1,800 mm Weight: 8,500 kg Equipment: Swing cut system NC preset control ELGO P 40 T Touch with backgauge and cutting gap adjustment from the front via the control system Motorized backgauge up to 1,000 mm Clear control panel mounted on swivel arm Hydraulic hold-downs arranged close to the cutting edge Foot switch Cutting gap adjustment Cutting line illumination Wide support table with ball transfers Foldable finger guard 1,000 mm 1 side stop with T-slot 2 sheet support arms with T-slot Easy replacement and regrinding of blades Adjustable cutting length for efficient processing Lower blade with four cutting edges, reversible Upper blade with two cutting edges, reversible Qualified customer service Operating instructions in ENGLISH Machine and equipment in accordance with CE regulations

Stanje: novo, Sheet length: 4,200 mm Sheet thickness: 13.0 mm Cutting width: 4,200 mm Total power requirement: 18.5 kW Weight approx.: 13,800 kg Dimensions (LxWxH): 4,650 x 2,270 x 2,000 mm Technical Specifications: Sheet thickness: 13 mm Cutting length: 4,200 mm Cutting angle: 1.80° Back gauge: motorized, 1,000 mm Motor power: 18.5 kW Length: 4,800 mm Width: 1,270 mm Height: 2,000 mm Weight: 13,800 kg Fodpfsd Ab Hijx Aflopb Features and Equipment: Swing cut design NC pre-selection control ELGO P 40 T Touch with back gauge and cutting gap adjustment operated from the control panel motorized back gauge up to 1,000 mm clearly arranged control panel mounted on swivel arm hydraulic hold-downs arranged close to the cutting edge foot switch cutting gap adjustment cutting line illumination wide support table with ball rollers foldable finger guard, 1,000 mm 1 side gauge with T-slot 2 sheet support arms with T-slot easy blade changing and regrinding adjustable cutting length for efficient processing bottom blade usable 4 times (quadruple rotating) top blade usable 2 times (reversible) qualified customer service Operating manual in ENGLISH Machine and equipment comply with CE regulations

Stanje: novo, Shaft diameter: 180 mm Upper roll diameter: 60 mm Lower roll diameter: 50 mm Working speed: 5 m/min Motor power: 3 kW Length: 1200 mm Width: 850 mm Height: 1200 mm Approx. weight: 1000 kg Technical Data: - Welded steel frame construction - 3 driven rolls Fsdpjd Ab H Nefx Aflepb - Hardened and ground shafts made from high-strength special steel - Rolls are hardened and ground - Horizontal and vertical working positions - Hardened standard rolls - Mobile control panel - Angle side guide rollers - Equipped with brake motor for precision bending - Digital displays (2 units) Options: - STANDARD digital display - NC unit, 7" screen, EURO 9,000 HPK 50 File Type Size Min. Dia Notes 1 60x10 20x5 500 250 Standard Rolls 2 80x20 50x5 500 250 Standard Rolls 3 32x32 12x12 400 250 Standard Rolls 4 Ø35 Ø10 350 250 Optional Rolls 5 Ø60x2 Ø15x1.5 600 200 Optional Rolls 6 2”x3.9 1/2”x2.7 400 200 Optional Rolls 7 50x25x3 20x15x2 450 250 Optional Rolls 8 45x3 20x2 600 300 Optional Rolls 9 60x60x6 30x30x4 650 350 Optional Rolls 10 50x50x5 30x30x4 550 350 Optional Rolls 11 60x7 20x3 550 250 Standard Rolls 12 50x6 20x3 500 250 Standard Rolls 13 60x7 20x3 500 250 Standard Rolls 14 UPN 80 UPN 30 600 250 Optional Rolls* 15 UPN 65 UPN 30 600 250 Standard Rolls* * Special washer (spacer) may be required / Only with special beam bending attachment • Capacities specified for 260 N/mm² plate yield strength

Stanje: novo, Shaft diameter: 60 mm Upper roll diameter: 215 mm Lower roll diameter: 215 mm High-performance hydraulics: 16 l/min Working speed: 4 m/min Motor power: 1.5 kW Length: 1000 mm Width: 1400 mm Height: 1650 mm Approx. weight: 950 kg Technical Data: - Welded steel frame - 3 rolls are driven by motor - Hardened shafts made of special steel - Upper roll hydraulically adjustable - Horizontal and vertical operating positions - Standard rolls - Guide rolls - Equipped with a brake motor for precision bending - Portable control panel Options: - Digital readout EURO 700 - NC unit EURO 7,000 - Lateral angle guide rolls EURO 1,400 HPK 50 file Type Size Min. Dia Notes Fpodpfxjd Ab H Rj Aflsb 1 60x10 20x10 600 300 Standard Rolls 2 100x15 50x10 600 300 Standard Rolls 3 35x35 15x15 600 300 Standard Rolls 4 Ø35 Ø20 600 300 Optional Rolls 5 Ø70x2 Ø25x1.5 1200 400 Optional Rolls 6 2”x2.9 1/2”x2.3 1000 300 Optional Rolls 7 70x30x3 30x15x2 1500 400 Optional Rolls 8 50x3 20x2 1600 400 Optional Rolls 9 50x50x6 30x30x3 600 400 Optional Rolls 10 50x50x6 30x30x3 900 600 Optional Rolls 11 60x7 30x4 600 400 Standard Rolls 12 60x7 30x4 700 400 Standard Rolls 13 60x7 30x4 700 400 Standard Rolls 14 UPN 80 UPN 30 800 400 Optional Rolls* 15 UPN 80 UPN 30 1200 600 Standard Rolls* * Special washer (spacer) may be required / Only with the special beam bending attachment • Capacities are based on a plate yield strength of 260 N/mm²

Stanje: novo, Dimensions (LxWxH): 1.10 x 1.15 x 1.40 m Approx. weight: 1,150 kg Total power requirement: 4 kW Sheet thickness: 6 mm Details: - Hydraulic drive Fjdpjd Ab Idefx Afljpb - Blade length: 200 mm - Notching angle adjustable from 60–140°, 6 mm - Notching angle adjustable from 30–59°, 4 mm

Stanje: novo, Bending length: 2600 mm Sheet thickness: 7 mm Top roller diameter: 200 mm Technical data: - Back roller motorized - Cone bending device - Hardened and polished rollers - Entire body made of St 52 steel - Asymmetrical design for perfect bending - Top and bottom rollers driven by brake electric motors and planetary gearboxes within the transmission - Portable control panel - In compliance with CE standards Fpodpfxjd Ab Ngs Afljb Options: - Bottom roller driven by electric motor: EURO 2,200 - Digital display for rear roller position: EURO 1,010 - Extended rollers: EURO 966 - Profile rollers: EURO 1,190 We have numerous references!

Stanje: novo, Bending length: 1600 mm Sheet thickness: 8 mm Top roller diameter: 170 mm Technical Data: - Back roller driven by motor - Cone bending device - Hardened and polished rollers - Entire frame made from St 52 steel - Asymmetric design for perfect bending results - Top and bottom rollers driven by brake electromotors and planetary gearboxes - Portable control desk - In compliance with CE standards Options: - Bottom roller driven by electric motor: EUR 1,650 - Digital display for back roller position: EUR 1,010 - Extended rollers: EUR 966 - Profile rollers: EUR 1,190 We have numerous references! Fpodpfx Aed Ab Nqeflob

Stanje: novo, Bending length: 1550 mm Sheet thickness: 3.5 mm Upper roll diameter: 110 mm Fodpsd Ab N Dsfx Aflepb Technical Data: - Rear roll driven by motor - Cone bending device - Entire frame constructed from St 52 steel - Main motor with brake system - Upper and lower rolls driven by electric motor, gearbox, and gear system - Mobile control panel - Cast iron body - Manual movement of rear and lower rolls - Complies with CE standards Options: - Upper roll driven by electric motor EURO 1,166.00 - Digital position display for rear roll EURO 1,010.00 - Hardened rolls EURO 995.00 - Special voltage EURO 480.00 - Material feed table - Lower roll driven by electric motor We have numerous references!