Težka Valja Blok nakup rabljenega (2.256)

Stanje: dober (rabljeno), Pneumatic cylinder bracket, bearing block, swivel flange, air cylinder bracket, pneumatic piston rod holder, air piston rod holder Lhedpfx Alob A S Hhe Nsf -Type: LSN-160 -Weight: 6 kg

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, CCT1600L A-M Preizkuševalnik tlaka za glavo in blok motorja – nova naprava. Hidravlično dviganje pladnja, motorizirana rotacija pladnja. Tehnični podatki: Maksimalne dimenzije glave motorja: Dolžina x Širina x Višina: 1350 x 425 x 300 mm Kapaciteta rezervoarja iz nerjavečega jekla: 500 litrov Grelni elementi: 2 x 4,5 kW Hidravlično dviganje pladnja Motorizirana rotacija pladnja Hidravlični dvig: 0,75 kW Reduktorski motor: 0,25 kW Lhodpfx Aljncd Ecj Njf Čas pomika gor/dol: 600 mm v 10 sek Termostat: 0-90°C Napajanje: 16kVA-3x230V-AC-50/60Hz Lastna teža cca: 600 kg Potrebni prostor: Dolžina x Širina x Višina: 2100 x 1050 x 1700 mm Če vas zanima, me prosim kontaktirajte! Na voljo še ostali stroji: Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Naprave za brušenje ventilov, stroji za brušenje glav in blokov, rezkalniki sedišč ventilov, preizkuševalniki tlaka, industrijski pralni stroji

Stanje: dober (rabljeno), 50-position filling machine with crown capper. Previously used in a winery for filling 1 L glass wine bottles. Lhedpfx Alsvq Suis Nsf

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Lhjdpfxofdkb Tj Al Njf Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Lhjdpsmhhypjfx Al Nsf Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolted system, hot-dip galvanized design Scope of delivery: - 4 upright frames, height 3,500 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Mounting hardware (bolts, nuts, and washers) Lodpfjmhh Dhsx Al Nohf - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extension is possible at any time) - (*Bulk availability: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Arms height-adjustable in 100 mm increments - Each upright comes with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Including mounting hardware (without ground anchors) - With assembly instructions and C4 load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notification before delivery. Material is sensibly packed to enable easy unloading. If installed outdoors, the load capacities reduce according to wind and snow loads. The foundation must be concrete, level, and suitable for dowelling, and able to bear the imposed loads. The customer is responsible for checking and ensuring the floor properties, load-bearing capacity, and for any permits required by authorities. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association recommendations, the uprights should have at least 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Racking Used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) Lhsdpfsmhh Dzsx Al Njf - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standards - Technical telephone support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification before delivery. The material is packed in a way that allows for easy unloading. When installing outdoors, loading capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowels, and capable of bearing the imposed loads. The floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall fixing is neither necessary nor recommended. According to professional association guidelines, it is recommended that rack uprights have an overhang of at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, each with base section 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available and extensions possible at any time - Bulk offer available: approx. 40 uprights in stock Detailed description: - Sturdy steel construction made from IPE sections (bolted system) - Surface hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms both 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - With assembly instructions and load capacity labels C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. Lhjdpfx Alemhh Ano Nof We offer reliable shipping with advance delivery notification. Materials are packed efficiently for easy unloading. For outdoor installation, load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for bolt anchors, and able to bear the applied loads. Floor condition, load capacity, and any required official permits must be checked and ensured by the customer. Racking uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that uprights project at least 500 mm above the uppermost storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) Lhjdpfxoguk A He Al Nef - 12 cantilever arms with 1.0 m usable depth - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Net price for collection: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 in accordance with DIN standards - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. The material is sensibly packed to ensure easy unloading. The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. Lhedpfxeguk Dkj Al Njf The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack used: bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable, extensions possible anytime) - (*Offer also available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized Lsdemhh Dtepfx Al Njhf - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Goods are packed for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, level, suitable for anchors, and able to withstand the applied loads. The customer is responsible for checking and ensuring the floor condition, load-bearing capacity, and any required official approvals. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational health and safety regulations, it is recommended that racks have at least a 500 mm overhang above the top storage level relative to the top edge of the upright.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack, used: bolt-together system in hot-dip galvanized finish Scope of delivery: - 4 uprights, height 2,600 mm, with base 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard version - Including horizontal and diagonal braces for 1,300 mm upright spacing - Incl. fastening materials (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone consulting Ljdoguk Dvepfx Al Nohf - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We provide reliable shipping with prior notice before delivery. Materials are packed sensibly for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for dowels, and able to support the applied loads. Base quality and load-bearing capacity, as well as any necessary official permits, are the customer's responsibility to check and ensure. The uprights must be anchored to the floor by the customer; anchoring to a wall is not necessary and not recommended. According to professional association guidelines, it is recommended the uprights maintain at least a 500 mm overhang to the top edge of the uprights on the highest storage level.

Leto izdelave: 2010, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2119219, Güntner V-Block povratni hladilnik s 14 ventilatorji. Popolnoma delujoč. Podatkovni list v prilogi. Ljdpfx Aljy Ah Tqs Nohf

Stanje: rabljeno, Leto izdelave: 2005, Dematic Roller Curve Left 90°-500-440 IR795 RA2351 Manufacturer: Dematic Direction of travel: 90° left-running Roller width (RB): 440 mm, tapered, plastic-coated Nominal/outer width (NB): 500 mm Internal radius (IR): 795 mm Lsdpfsvu Ihyox Al Nohf 3x 300-500V Frame height: 132 mm Overall height including motor: 275 mm Geared motor: SEW WF20 DT71D4/Z/MM03/BW1 Conveying speed: 0.6 m/s Optionally available: Supports Side guides Frequency inverter for stepless speed control Price excl. VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, expert advice, please feel free to contact us. Get in touch with us by phone or email. We are happy to support you with the planning and implementation of your projects. We look forward to hearing from you. Kind regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact for intralogistics

Stanje: rabljeno, Leto izdelave: 2001, Dematic valjčna krivina desno ali levo 90° z ravnim delom 2315-600-540 IR795 RA1643 Proizvajalec: Dematic Smer teka: 90° desno/levo Širina valja (RB): 540 mm stožčasta, plastična prevleka Nazivna/zunanja širina (NB): 600 mm Notranji radij (IR): 795 mm Dolžina: 1790 mm + 525 mm ravni del, ravni del je mogoče odstraniti 3x 300-500V Višina okvirja: 132 mm Višina z motorjem: 275 mm Redukcijski motor: SEW WF20 DT71D4/Z/MM03/BW1 Hitrost transporta: s frekvenčnim pretvornikom nastavljiva med 0,142 in 1,42 m/s Paket vključuje: brez stojal (po potrebi nas kontaktirajte) Lhjdpsk Abf Rjfx Al Njf Za individualno in strokovno svetovanje se obrnite na nas. Kontaktirajte nas po telefonu ali e-pošti. Z veseljem vam bomo pomagali pri načrtovanju in izvedbi vaših projektov. Veselimo se vašega povpraševanja. Lep pozdrav, ekipa Dr. Sonntag GmbH & Co. KG Vaš specialist in kontakt za intralogistiko

Stanje: rabljeno, Leto izdelave: 2007, RA1784 Galler OMEGA Pallet Racking System Used 16600 x 5400 x 1350 mm Installed in a warehouse Rack height: 5,400 mm Rack depth: 1,350 mm Clear bay width: 3,200 mm Stored goods: Pallets with goods Storage depth: 1,350 mm Storage levels: 1. Goods stored on the floor Lhjdpfx Aljk Abbbe Nsf 2nd to 5th levels: goods stored on pairs of beams Load capacity per pair of beams with a clear bay width of 3,200 mm and level height of 1,500 mm: 2,100 kg Bay load: 8.4 t with a column buckling length of 1,500 mm (minimum 4 bays) → All load capacities apply to evenly distributed loads. Finish: Frame: Sendzimir galvanized Beams: RAL 7035 light grey WITH SURFACE RUST SPOTS Setup: 1 unit single-sided racking row, installed against a hall wall 5 x 3,300 + 100 = total length 16,600 mm Comprising: 6 units Galler Omega Upright Frames, bolted 5,400 x 1,350 mm 40 units Galler Sigma Beams 3,200 mm 80 units Safety Pins Price net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, Würzburg Optional, if required: 2 used impact protection corners At the beginning/end and at drive-through points for protecting the rack uprights For individual, professional advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact for intralogistics

Stanje: dober (rabljeno), Okvir: 2750*1100 mm Prečke: 1800*80 mm 2800 kg/polica 2700*100/120 mm 2400-3000 kg/polica Če potrebujete police ali dodatno opremo v drugih sestavah ali izvedbah, nas prosim kontaktirajte. Nudimo obsežen program novih in rabljenih regalov ter dodatne opreme in vam z veseljem pomagamo pri načrtovanju. Dodatna oprema kot na primer: Okvirna, kotna in čelna zaščita, zaščite pred potiskanjem, iverne plošče, rešetkaste police, zadnje mreže, distančniki na voljo. Pošiljanje: Prosimo, povprašajte za stroške prevoza z navedbo vaše poštne številke, kraja in želene količine artiklov. Druge storitve: Načrtovanje, montaža/demontaža regalov, odkup/prodaja Pridržujemo si pravico do sprememb in napak v tehničnih podatkih, informacijah ter cenah, kot tudi do predhodne prodaje! Ledpsd Duc Tefx Al Nohf

Stanje: rabljeno, Traverse: 2700x120x50 mm, 63 ks Rámy: 5200x1000x95 mm, 17 ks 4600x1000x90 mm, 4 ks 2300x1000x95 mm, 2 ks Pokud potřebujete regály nebo příslušenství v jiných sestavách či provedeních, kontaktujte nás prosím. Nabízíme kompletní sortiment nových i použitých regálů a příslušenství a rádi Vám pomůžeme s plánováním. K dispozici další příslušenství jako např.: Lodpfx Aeh Izr Uel Nehf Ochrana rámu, rohů a nájezdů, zabezpečení proti protlačení, dřevotřískové desky, roštové podlahy, zadní mříže, hloubkové nosníky apod. Doprava: Na požádání Vám rádi sdělíme náklady na dopravu na základě PSČ, místa a požadovaného množství zboží. Další služby: Plánování, montáž/demontáž regálů, výkup/prodej Změny a chyby v technických údajích, informacích a cenách, jakož i mezitímní prodej vyhrazeny!

Stanje: novo, Matrica blok, 80 x 80 mm z V-utorji pribl. 86°, dolžina 2500 mm Ledoy Dilkepfx Al Njhf

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2005, Funkcionalnost: nepreverjeno, skupna dolžina: 10.000 mm, skupna višina: 3.200 mm, skupna širina: 1.200 mm, skupna masa: 1.000 kg, Brez minimalne cene - zagotovljena prodaja najvišjemu ponudniku! Oddaja ponudbe obvezuje k pravočasnemu prevzemu med 23.06.2026 in 26.06.2026! Lhsdpfx Aoy D Txbjl Nsf TEHNIČNI PODATKI Mere odlagalne površine: 2.700 x 1.100 mm PODROBNOSTI O STROJU Mere in teža Mere (D x Š x V): 10.000 x 1.200 x 3.200 mm Teža: 1.000 kg Interna referenca: 74

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, nosilnost na odsek shranjevanja: 2.600 kg, skupna dolžina: 5.700 mm, skupna višina: 3.500 mm, skupna širina: 1.200 mm, Brez minimalne cene – zagotovljena prodaja najvišji ponudbi! Oddaja ponudbe obvezuje k pravočasnemu prevzemu med 23.06.2026 in 26.06.2026! Lodpfx Aloy D Th Ae Nehf TEHNIČNI PODATKI Dimenzije na odlagalno površino: 2.700 x 1.200 mm Nosilnost police: 2.600 kg PODROBNOSTI O STROJU Dimenzije & teža Dimenzije (D x Š x V): 5.700 x 1.200 x 3.500 mm Teža: 700 kg Zunanja referenca: 5

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, skupna dolžina: 5.700 mm, skupna višina: 3.500 mm, skupna širina: 1.200 mm, skupna masa: 700 kg, Brez minimalne cene – zagotovljena prodaja ponudniku z najvišjo ponudbo! Oddaja ponudbe obvezuje k pravočasnemu prevzemu med 23.06.2026 in 26.06.2026! TEHNIČNI PODATKI Dimenzije na polico: 2.700 x 1.200 mm PODROBNOSTI O STROJU Dimenzije in teža Lhjdpey D Tg Sjfx Al Nsf Dimenzije (D x Š x V): 5.700 x 1.200 x 3.500 mm Teža: 700 kg Zunanja referenca: 7

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, skupna dolžina: 2.700 mm, skupna višina: 2.400 mm, skupna širina: 600 mm, skupna masa: 200 kg, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! Oddaja ponudbe zavezuje k pravočasnemu prevzemu med 23.06.2026 in 26.06.2026! Lhjdsy D Sbhepfx Al Njf TEHNIČNI PODATKI Dimenzije odlagalne površine: 2.600 x 500 mm PODROBNOSTI STROJA Dimenzije & teža Dimenzije (D x Š x V): 2.700 x 600 x 2.400 mm Teža: 200 kg Zunanja referenca: 19

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, Brez minimalne cene – zagotovljena prodaja najvišji ponudbi! Oddaja ponudbe obvezuje k pravočasnemu prevzemu med 23.06.2026 in 26.06.2026! TEHNIČNI PODATKI Dimenzije na odlagalno površino: 2.700 x 1.100 mm PODROBNOSTI O STROJU Dimenzije in teža Dimenzije (D x Š x V): 2.800 x 1.200 x 2.000 mm Teža: 250 kg Ledpfx Aey D Rn Tsl Nohf Zunanja referenca: 1

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: EAN0729389556525, dolžina opore: 3.600 mm, dolžina police: 11.200 mm, višina okvirja: 4.500 mm, obremenitev na par nosilcev (maks.): 3.000 kg, širina okvirja: 1.100 mm, število vrst polic: 1, 1 vrstna paletnih regalov (M45113615-3) Dolžina 11,2 m, višina 4,5 m, globina 1,1 m, 3 polja, širina 3,6 m, Vsako polje ima 3 nivoje prečk, nosilnost polja 3000 kg. - 4 okvirji (RM4511 – RAL5019) - 8 talnih plošč, podložni material, pritrditveni material - 16 talnih sider (ZZBA1210) - 18 posameznih prečk (T3615 – RAL2008) Lhjdpjv Urchefx Al Nsf - 1 oznaka nosilnosti (BSMcP) Okvirji so vijačeni, niso predmontirani Prevoz / dostava: - največ 20 delovnih dni po prejemu plačila - dostava do gradbišča / mesta montaže - razklad s tovornjaka opravi kupec z lastno dvižno opremo - dobava po celotni Nemčiji, razen otokov; dobava v države EU po individualnem dogovoru.