Sušilnik Zraka nakup rabljenega (2.633)

Stanje: dober (rabljeno), Leto izdelave: 1999, Hladilni sušilnik Proizvajalec: KAESER Gbodpjttwzbefx Afqeg Tip: TE 121 Leto izdelave: 1999 Nazivna moč motorja: 2,1 kW Vzdrževanje izvedeno s strani podjetja Kaeser. 161225ä

Leto izdelave: 2003, Stanje: pripravljen za uporabo (rabljen), Secador de tambor usado fabricado por SAFEM, extraído de una línea de productos sin gluten. Fluido: Vapor Presión de diseño: 12 bar Presión máxima de trabajo: 9,5 bar Presión de prueba: 24 bar Temperatura máxima de funcionamiento: 192ºC Volumen: 4,55 m³ Presión x Volumen: 54,6 bar x m³ Gbedpoq Nmuwefx Afqjg

Stanje: novo, ME-LINE – Air-cooled dehumidifiers are used for air drying at up to 100% relative humidity (RH) at temperatures of +45 ºC and above. EU-LINE – Air-cooled dehumidifiers are used for air drying at up to 100% relative humidity (RH) at temperatures from -30 ºC to +40 ºC. Rust is the adversary of freshly blasted steel; high humidity combined with low steel temperatures creates ideal conditions for moisture condensation on the newly blasted surface. Flash rust is a leading cause of premature coating failure. By reducing relative humidity, Proton dehumidifiers are designed to provide the optimal climatic conditions for blasting. Climatic conditions around the world vary greatly, from cool and humid in Western Europe, warm and humid in the Far East, to hot and humid in the Middle East. Various technologies may be used in the dehumidification process; certain dehumidification technologies perform better than others in specific climate conditions. Each Proton dehumidifier is built to the highest quality standards and features regional certification. At the heart of the dehumidifier is a highly efficient and durable metal silicate rotor. The rotor contains numerous air channels running parallel to the shaft, ensuring a large internal surface area for moisture adsorption. The rotor is not affected by oversaturation. Thus, the rotor in the PROTON dehumidifier can withstand prolonged storage in high humidity without loss of capacity. The PROTON dehumidifiers are specifically developed for corrosion protection in conjunction with sandblasting and painting operations, in order to preserve materials and prevent moisture-related problems. They meet the following criteria: • Available in sizes ranging from 1,000 m³/h to 18,000 m³/h dry air. • Available in pre-cooled and post-cooled versions for warm climates. • Robust construction with steel frame, lifting eyes, etc. • Key components are easily maintained and replaced. • Large air inlet grilles and filters. • Can be installed in containers for protection. • Adjustable dehumidification capacity and air outlet temperature in 4 stages. • Suitable for outdoor and indoor use. • Dry air pressure up to 1,200 Pa. Technical specifications: Dehumidifier capacities range from 1,000 m³/h to 18,000 m³/h. PROTON dehumidifiers reduce relative humidity (RH) from 90% down to 10–15%. Dehumidifiers can remove up to 100 liters of water per hour. Godpfx Afskw Ukujqobg

Leto izdelave: 2024, Stanje: novo, For Sale: Drying System - 1T 184 TPR Model (Mobile Conveyor Belt) We are offering a high-quality drying system, ideal for drying wood sawdust, crops, recyclable waste, and food industry raw materials. Below you will find the design data and features of the drying system: Design Data: • Treated product: Sawdust • Physical appearance: Loose – > 1 mm • Initial moisture content: 55%, 50%, 40% • Final moisture content: 12% • Wet capacity: 4.00 t/h, 4.50 t/h, 5.65 t/h • Dry capacity: 2.05 t/h, 2.55 t/h, 3.85 t/h • Drying air temperature: 80 °C • Required heat output: 1,800 - 2,350 kWh • Max. water evaporation per hour: 1,800 - 1,955 kg/h Installed Electric Power: • Feeder hopper: 5.5 kW (x2) • Dryer belt: 2.2 kW • Discharge unit: 5.5 kW • Extraction fans: 22.00 kW (x3) • Cleaning fans: 4 kW (x2) • Total installed power: Approx. 92.70 kW Water-Air Heat Exchanger: • Recommended heat output: 2,600 kW • Water temperature: 90 °C in – 70 °C out Dimensions: • Dryer frame external dimensions: Approx. 22 m length, 6 m width • Dryer belt surface: 72 m² • Discharge unit: 5,500 mm x Ø 300 mm • Feeder hopper: Approx. 1.00 m³ • Number of extraction fans: 3 • Number of water-air heat exchangers: 4 Technical Description: • Feed system: Adjustable screw conveyor with level sensor • Drying table: Modular design with inspection windows • Dryer belt: Polyester fabric conveyor belt with steel rollers • Thermal insulation: 50 mm thick rockwool, with Magnelis® cladding • Mixing brush: Painted steel mixing brush • Base frame: Folded steel plates with reinforcing profiles • Dryer belt cleaning system: High-pressure air and water spray system • Water spray system: Closed-circuit water spray system • Access and walkways: Safe access ladders and walkways • Discharge unit: Steel screw conveyor with drive motor Gjdpfx Afeua D U Ieqobg • Heat exchangers: High-efficiency steel finned heat exchangers • Air dehumidifying fans: Centrifugal fans with vibration-absorbing couplings • Heat recovery: Hot air recirculation duct • Machine housing: Prefabricated casing made of insulated sandwich panels • Dust filters: Dust filters on air intake grille • Painting cycle: Phosphating, passivation, polyester powder coating • Electrical control panel with PLC: SCHNEIDER electric and PLC components, HMI operator panel • Moisture control system: PT 100 temperature sensors • Remote service: Direct connection via internet • Inlet and outlet moisture sensors: 4-20 mA configuration For more information and quotations, please contact us! We look forward to your inquiry! Price: 530,000 EUR

Stanje: novo, Leto izdelave: 2025, Generator vročega zraka, toplozračna peč, delavniška peč, ogrevanje hal, modeli F28, F55CV, F85CV, F120CV NOVE stroji Takojšnja dostava -30 % POPUST na stroje z takojšnjo dostavo CE-uredba: DA Izjava o skladnosti EU: DA Navodila za uporabo: DA Približna ogrevana površina F28: 100/150 m² Gsdpfeh U A Uasx Afqjbg Približna ogrevana površina F55CV: 300/350 m² Približna ogrevana površina F85CV: 450/500 m² Približna ogrevana površina F120: 600/700 m²

Stanje: rabljeno, Leto izdelave: 1996, UV naprava UV sušilnik IST STRAHLTECHNIK Lignocurve Tip HL - 160 -1 H DL UV cevi T 1600 U1 UV območje 180-450 nm Gjdpfx Afjx Hglaeqsbg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: PL071105402R, Sušilnik M&R s širino traku 122 cm. Sušilnik je v odličnem stanju in deluje na elektriko. Trak je tako širok, da lahko nanj postavite dve vrsti tekstila eno ob drugi! Sušilnik smo že razstavili in je pripravljen za pošiljanje. Stroški razstavljanja zato odpadejo. Tudi nakladanje na tovornjak uredimo mi. Na lokaciji imamo špedicijo. Cena pošiljanja je odvisna od kraja prejema. Priporočamo neposredno dostavo! Gsdpsw Stp Ijfx Afqsbg

Stanje: rabljeno, Električna komorna peč z recirkulacijo zraka Nabertherm Godpfsxmhhajx Afqsbg Tip: N 500 / 45 HA Pretok zraka: vodoravno Temperatura: maks. 450°C Skupna moč: 28 kW Notranje mere (Š x G x V): ca. 790 x 1000 x 760 mm

Leto izdelave: 2024, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Nr.50086, Nova naprava na prodajo zaradi okoliščin: 6 priključnih mest z prezračevalnim kanalom. Samo osebni prevzem! Cena iz lokacije 31637 Rodewald. Gbsdpfxew Uf S Hj Afqsg

Stanje: novo, Leto izdelave: 2025, Furnace output: 175 kW Working output: 140 kW Flue outlet diameter: 200 mm Warm air distribution ducts: 1 x 500 mm Furnace length: 950 mm Furnace width: 600 mm Furnace height: 860 mm Air delivery: 8,900 m³/h Power consumption: 3,500 W Gbsdji Hplropfx Afqjg Designed for room volume: 3,000 m³ Heatable area: 500/600 m² Oven height without warm air ducts: 2,200 mm Oven width: 930 mm Oven length without flue gas fan: 1,700 mm Weight: 615 kg

Stanje: novo, Leto izdelave: 2025, Hot Air Generator, Warm Air Furnace, Workshop Stove, Hall Heater — Models F28 - F55CV - F85CV - F120CV - F240CV NEW machines The machines operate with wood Gbsdpfx Ajf H Hlrofqjg Immediate delivery Suitable for heating industrial buildings, warehouses, workshops, and private spaces. Fuels: wood, wood chips, paper, cardboard CE-compliant machines: YES Voltage: 220V single-phase (models F28 and F55CV) Voltage: 380V (models F85CV, F120CV, F240CV) 100% MADE IN ITALY CV models are equipped with an additional fan for flue gas extraction at the base of the chimney. Available models: F28 – Heating area up to 100/150 m² F55CV – Heating area up to 300/350 m² F85CV – Heating area up to 450/500 m² F120CV – Heating area up to 650/700 m² F240CV – Heating area up to 1000 m² Technical construction features: Horizontal furnace made of stainless, thermal chromium steel with reinforcing ribs. Two- or three-pass smoke tube heat exchanger. Inner lining made of polished sheet metal for insulation and separation. Outer casing of painted or galvanized sheet metal. Frame constructed of painted steel profiles. Feeding doors fitted with fireproof material and removable grates. Fireproof plates for cleaning the tubes. Centrifugal fans with dual suction for warm air distribution, operating at low speed, mounted on special elastic mountings, driven by one or more electric motors. Electrical control and switching panel – adjustable thermostat. Maintenance: Routine maintenance consists of removing accumulated ash by opening the door. General cleaning of the tubes should be carried out once or twice a year.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, skupna masa: 800 kg, moč: 19,5 kW (26,51 KM), kapaciteta rezervoarja: 200 l, volumenski pretok: 350 m³/h, Sušilnik s suhim zrakom z zalogovniki za granulát in separatorji materiala Proizvajalec: Piovan Tip: DSN521NE Gbjdpfxsx Na Its Afqjg Št.: ODE 6242 4 izolirani zalogovniki za granulát, vsak s prostornino 200 L Z dodatnim gretjem 3 separatorji materiala Proizvajalec: Colortronic Naprava je bila preverjena v vseh funkcijah in je popolnoma delujoča!

Stanje: dober (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, pritisk: 12 letvica, skupna masa: 400 kg, vhodna napetost: 400 V, moč: 4,3 kW (5,85 KM), High-performance refrigerated air dryer / compressed air dryer 22 m³/min Ingersoll-Rand model: TS220 SS Year of manufacture: 2003 Airflow: max. 22,000 l/min Maximum pressure: 12 bar Refrigerant: 407C gas – 3.5 kg Mains voltage: 400 V, 50 Hz, 7.5 A Connection: DN80 Machine dimensions: Length: 1,010 mm Width: 1,500 mm Height: 1,310 mm Weight: 400 kg Ambient temperature: 2°C – 50°C Maximum inlet temperature: 60°C Gedpfx Afjrfyrpsqjbg IP rating: IP44 standard

Stanje: novo, Leto izdelave: 2025, AL-KO POWER UNIT® 120 M with automatic machine detection Clean-air extraction unit with H3 certification Suction inlet: 120 mm Motor rated power: 1.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum airflow: 1,140 m³/h Rated airflow: 814 m³/h Negative pressure: 2,180 Pa Filter area: 5.1 m² Chip collection volume: approx. 135 liters Dimensions (L x W x H) in mm: 1,178 x 650 x 1,972 Weight: approx. 121 kg Location: Ex stock 54634 Bitburg Gbedpfx Afshkztwsqeg - immediately available -

Leto izdelave: 2002, Stanje: dober (rabljeno), Kaut adsorption dryer CR 600 Manufacturer: KAUT GmbH Model: CR600 Dryer Year of manufacture: 2002 Nominal dry air flow: 600 m³/h Free-blowing dry air flow: 750 m³/h Regeneration air flow: 170 m³/h Voltage: 400V / 3N + PE / 50 Hz Power consumption: 5.9 kW Dehumidification capacity at 10°C / 70% relative humidity: 3.8 kg/h Dehumidification capacity at 20°C / 60% relative humidity: 4.4 kg/h Gbodpfetib R Iex Afqjg Dehumidification capacity at 20°C / 80% relative humidity: 5.2 kg/h Available external pressure, dry air side: 220 Pa Available external pressure, regeneration air side: 150 Pa Installation and dimensions Weight: 110 kg

Stanje: novo, Leto izdelave: 2025, Ex-display unit – available at a special price Available at a special price Technical Data 300-P Inlet diameter: 300 mm Motor rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. air flow rate: 6,000 m³/h Nominal air flow rate: 5,089 m³/h Negative pressure: 2,280 Pa Filter area: 30 m² Chip collection volume: 3 x 250 L Dimensions (L / W / H) in mm: 2,963 x 994 x 2,346 Weight: 880 kg Special feature: Unit is equipped with a silencer – therefore extremely quiet – can be sold with or without the silencer Location: Available ex stock 54634 Bitburg Gbodpfxecdy I Ts Afqeg

Stanje: rabljeno, Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, volumenski pretok: 1,8 m³/h, skupna širina: 800 mm, skupna dolžina: 1.000 mm, skupna višina: 1.450 mm, pritisk: 16 letvica, skupna masa: 300 kg, BEKO Drypoint RA300 Refrigeration Dryer 30 m³/min +3°C /ct1933/ Gbjdet A Uwtepfx Afqog Manufacturer: BEKO DRYPOINT Model: RA300 Year of manufacture: 2005 Connection: DN80 PN16 Air capacity: 1800 m³/h, +3°C Level-controlled BEKOMAT condensate drain Operating pressure: 4–14 bar Housing dimensions: 800 x 1000 x 1410 mm Weight: 275 kg

Stanje: novo, Leto izdelave: 2025, Al-Ko Clean Air Dust Extractor Year 2024 Exhibition piece – Immediately available Absolute special price Technical Data Power Unit 250 P Gbodpfx Afjcdy I Reqsg Inlet nozzle: 250 mm Rated motor power: 6.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. air flow rate: 4,900 m³/h Nominal air flow rate: 3,524 m³/h Vacuum pressure: 2,451 Pa Filter surface area: 22.4 m² Chip collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2,305 x 994 x 2,351 Weight: 758 kg Location: in stock, 54634 Bitburg

Stanje: rabljeno, Radial fan 2.2 kW 5500 m³/h supply air fan VanDIJK radial fan Airflow approx. 5500 m³/h Gbodpfjufiz Rox Afqeg Impeller made of stainless steel Plastic housing Direct drive Motor: 2.2 kW, 380/220 V Speed: 2830 rpm Discharge side pipe diameter: 250 mm Inlet side pipe: 200 mm

Stanje: novo, Leto izdelave: 2025, Clean Air Dust Extractor RLA 160 For wood dust and chips, designed for commercial use Article number: 5131620 Brand: Holzkraft Suitable for wood chips and wood dust. Designed for commercial use. All clean air extraction units in this series are H3 dust-tested, with residue dust content less than 0.1 mg/m³. High extraction performance with minimal space requirements Maximum performance in this class Very quiet Areas of application Clean air extraction units for wood chips and wood dust Designed for commercial applications Suitable for all woodworking machines with the corresponding extraction port diameter Can be used for multiple dust sources High-quality and well-engineered construction Durable and compact housing made of galvanized sheet steel Extraction ports easily convertible from left to right, allowing flexible use Large inspection openings Gjdpfx Aocnw T Ijfqjbg Large-capacity mobile chip containers with clamping bracket and collection bag Unit is delivered fully assembled for immediate use Mobile Filter Description Ultra-compact design with maximum filter surface area Filter material made of polyester fleece, aluminum-coated, washable, and thus long-lasting Filter comes in antistatic design as standard, tested and approved to Category M-BIA Filter resistance monitoring via differential pressure gauge, adjustable with warning lamp on the control panel The fan is installed after the filter (downstream) Features: Equipped with a new type of locking mechanism for secure container positioning All units in this series are H3 dust-tested, with residual dust content less than 0.1 mg/m³ Scope of delivery: Metal impeller Inspection opening for cleaning the bypass filter 5 m connection cable with CEE 5-pin plug and phase inverter 2 fixed and 2 swivel castors with locking brake Manual filter cleaning Model RLA 160 Item number 5131620 Technical data Extraction port diameter 160 mm Nominal air flow 1448 m³/h Max. air flow 2400 m³/h Negative pressure at nominal flow 2247 Pa Filter surface area 9.21 m² Filter material Dust class M Residual dust content H3 (< 0.1 mg/m³) Filter cleaning — Compressed air supply — Chip collection volume 2 x 193 l Mains voltage 400 V Mains frequency 50 Hz Motor power 2.2 kW Max. sound pressure level 73 dB(A) Dimensions (L x W x H) 1681 x 830 x 1654 mm Weight 254 kg Location: Available from stock 54634 Bitburg

Stanje: novo, Leto izdelave: 2025, AL-KO POWER UNIT® 300 P-BP 30 -50 Suction inlet: 300 mm Rated motor power: 7.5 kW / 3-phase Gjdpfxoh D If He Afqjbg Voltage: 400 V / 50 Hz Maximum airflow: 6,000 m³/h Rated airflow: 5,089 m³/h Negative pressure: 2,587 Pa Filter surface area: 30 m² Dimensions (L x W x H) in mm: 3,000 x 1,361 x 2,817 Briquetting output: 30 - 50 kg/h Briquette diameter: 50 mm Weight: 1,570 kg This machine is brand new in our stock – IMMEDIATELY AVAILABLE – Subject to prior sale Location: 54634 Bitburg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Compressed Air Refrigeration Dryer KAESER TB19, with energy-saving SECOTEC control system. Year of manufacture: 2013 Technical Data: Air flow rate: 2.10 m³/min Gedswmxb Tspfx Afqjbg Pressure dew point: 3°C Operating pressure: 3 to 16 bar Ambient temperature: +3°C to +43°C Max. inlet air temperature: +55°C Compressed air connection: G 1" Dimensions (W x D x H): 620 x 540 x 963 mm Weight: 108 kg Electrical supply: 230 V / 1 / 50 Hz Location: ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2025, A thoroughly reliable, mobile family: AL-KO POWER UNIT® extraction systems are available for maximum airflows between 790 and 10,000 m³/h. This makes the energy-efficient AL-KO POWER UNIT® models the perfect solution for small to medium extraction volumes, or an ideal complement to existing stationary systems. Your advantages: • IE3 motor as standard • Approx. 73 m² filter surface area • Pre-separator as standard • Certified according to GS-HO-07 • H3 residual dust content of 0.1 mg/m³ reliably maintained (wood dust) • Optional: type-tested rotary valve (FSA) • Tested return flow damper • Integrated automatic extinguishing system Technical data: • Rated motor power: 11.0 kW / 3 Ph • Voltage: 400 V / 50 Hz • Max. airflow: up to 8,500 m³/h at the fan • Rated airflow: 6,927 m³/h Gjdpfx Aehkzt Nefqebg • Negative pressure at rated flow: 2,543 Pa • Inlet diameter: 350 mm • Noise level: 71 dB(A) at full load (according to DIN EN ISO 11201) • Chip collection container volume (net/gross): 3 x 165 L / 3 x 250 L • Dimensions (L x W x H) in mm: 3,130 x 1,058 x 2,361 • Net weight without packaging: 977 kg - Dust class H3 Location: Available from stock, 54634 Bitburg - Immediately available – in stock Subject to prior sale

Stanje: novo, Leto izdelave: 2025, Compact design Maximum reliability High suction capacity Integrated pre-separator 100% air recirculation, residual dust content < 0.1 mg/m³ Low noise emission Gbsdehkzu Aopfx Afqog Longer filter service life Easy emptying Plug-and-play delivery with rotary valve lock Models with rotary valve lock: AL-KO POWER UNIT® 300 ZRS Suction connection: 300 mm Motor rated power: 7.5 kW / 3 Ph Voltage: 400 V / 50 Hz Maximum air flow: 4,900 m³/h 6,000 m³/h Rated air flow: 5,089 m³/h Negative pressure: 2,280 Pa Filter area: 30 m² Filter cleaning: pneumatic Dimensions (L x W x H) in mm: 2,950 x 994 x 3,013 Rotary valve capacity: 15,816 L/h Weight: 920 kg Location: from stock 54634 Bitburg - immediately available - Subject to prior sale

Stanje: novo, Leto izdelave: 2025, Raw Air Extraction Unit ASA 163 with standard chassis Dimensions and Weights Gbodpfxshk S S Eo Afqsg Chip collection volume: 175 l Nominal diameter (outside) of extraction inlet: 160 mm Length approx.: 1096 mm Width/Depth approx.: 648 mm Height approx.: 2300 mm Weight approx.: 40 kg Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter surface area: 2.2 m² Noise Emission Maximum sound pressure level: 83 dB(A) Airflow Nominal air flow rate: 2200 m³/h Suitable for milling, planing, and sawdust (not for fine dust) Significantly reduced dust content due to BIA-certified filter material with high separation efficiency Housing parts and impellers made from high-strength special plastic Quick-release fasteners for filters and chip bags for easy maintenance Robust, high-quality construction Easily maneuverable thanks to swivel castors Low power consumption Extraction units comply with Dust Class L Scope of delivery: Unit body with mounted fan unit Filter bag / extraction unit Chip bag / extraction unit without extraction hose